Re: [RFC PATCH 5/6] ARM: dts: omap3beagle-xm: Add idle state pins for USB host

[Kevin Hilman <khilman@linaro.org>]

Roger Quadros <rogerq@ti.com> writes:

> Add the Idle state pins for USB host and enable WAKEUP on
> DIR, DAT0-3, so that the PHY can wakeup the OMAP SoC from
> sleep on any USB activity (e.g. remote wakeup or connect/disconnect).
>
> CC: Benoît Cousson <b-cousson@ti.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>

This one doesn't apply...

> ---
>  arch/arm/boot/dts/omap3-beagle-xm.dts |   29 +++++++++++++++++++++++------
>  1 files changed, 23 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
> index d3808ed..f1d56c2 100644
> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
> @@ -89,12 +89,7 @@
>  };
>  
>  &omap3_pmx_core {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <
> -			&hsusbb2_pins
> -	>;
> -
> -	hsusbb2_pins: pinmux_hsusbb2_pins {

This omap3_pmx_core section doesn't exist upstream in the xM DTS file
(but does in omap3-beagle.dts.)  

Is there a dependency patch missing?

Kevin