All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: Michal Kazior <michal.kazior@tieto.com>
Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org
Subject: Re: [PATCH 2/2] ath10k: make core registering async
Date: Thu, 22 May 2014 19:42:41 +0300	[thread overview]
Message-ID: <87ppj5wyri.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <1400767955-16313-3-git-send-email-michal.kazior@tieto.com> (Michal Kazior's message of "Thu, 22 May 2014 16:12:35 +0200")

Michal Kazior <michal.kazior@tieto.com> writes:

> If ath10k was built into the kernel it could stall
> booting for 120 seconds by default (60 seconds for
> each firmware API variant) waiting for firmware
> files before userspace was ready or filesystems
> mounted.
>
> Fix this by making the core registering
> asynchronous.
>
> This also shoves off about 1 second from boot time
> on most systems since the driver is now mostly
> initialized in a worker and modprobe takes very
> little time to complete.
>
> As a side effect there's no way to propagate
> registering errors to the pci subsystem but this
> probably isn't really necessary.
>
> Signed-off-by: Michal Kazior <michal.kazior@tieto.com>

[...]

> --- a/drivers/net/wireless/ath/ath10k/pci.c
> +++ b/drivers/net/wireless/ath/ath10k/pci.c
> @@ -2758,8 +2758,6 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
>  	if (!ar_pci)
>  		return;
>  
> -	tasklet_kill(&ar_pci->msi_fw_err);

Why this? That's not obvious to me.

-- 
Kalle Valo

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: Michal Kazior <michal.kazior@tieto.com>
Cc: <ath10k@lists.infradead.org>, <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH 2/2] ath10k: make core registering async
Date: Thu, 22 May 2014 19:42:41 +0300	[thread overview]
Message-ID: <87ppj5wyri.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <1400767955-16313-3-git-send-email-michal.kazior@tieto.com> (Michal Kazior's message of "Thu, 22 May 2014 16:12:35 +0200")

Michal Kazior <michal.kazior@tieto.com> writes:

> If ath10k was built into the kernel it could stall
> booting for 120 seconds by default (60 seconds for
> each firmware API variant) waiting for firmware
> files before userspace was ready or filesystems
> mounted.
>
> Fix this by making the core registering
> asynchronous.
>
> This also shoves off about 1 second from boot time
> on most systems since the driver is now mostly
> initialized in a worker and modprobe takes very
> little time to complete.
>
> As a side effect there's no way to propagate
> registering errors to the pci subsystem but this
> probably isn't really necessary.
>
> Signed-off-by: Michal Kazior <michal.kazior@tieto.com>

[...]

> --- a/drivers/net/wireless/ath/ath10k/pci.c
> +++ b/drivers/net/wireless/ath/ath10k/pci.c
> @@ -2758,8 +2758,6 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
>  	if (!ar_pci)
>  		return;
>  
> -	tasklet_kill(&ar_pci->msi_fw_err);

Why this? That's not obvious to me.

-- 
Kalle Valo

  parent reply	other threads:[~2014-05-22 16:43 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-22 14:12 [PATCH 0/2] ath10k: async pci probing Michal Kazior
2014-05-22 14:12 ` Michal Kazior
2014-05-22 14:12 ` [PATCH 1/2] ath10k: relocate core create/destroy functions Michal Kazior
2014-05-22 14:12   ` Michal Kazior
2014-05-22 14:12 ` [PATCH 2/2] ath10k: make core registering async Michal Kazior
2014-05-22 14:12   ` Michal Kazior
2014-05-22 14:41   ` Johannes Berg
2014-05-22 14:41     ` Johannes Berg
2014-05-23  7:08     ` Michal Kazior
2014-05-23  7:08       ` Michal Kazior
2014-06-23 10:19     ` Michal Kazior
2014-06-23 10:19       ` Michal Kazior
2014-06-23 11:51       ` Johannes Berg
2014-06-23 11:51         ` Johannes Berg
2014-06-23 12:17         ` Michal Kazior
2014-06-23 12:17           ` Michal Kazior
2014-06-23 12:32           ` Johannes Berg
2014-06-23 12:32             ` Johannes Berg
2014-06-23 12:59             ` Michal Kazior
2014-06-23 12:59               ` Michal Kazior
2014-06-23 14:10               ` Johannes Berg
2014-06-23 14:10                 ` Johannes Berg
2014-05-22 16:40   ` Kalle Valo
2014-05-22 16:40     ` Kalle Valo
2014-05-23  7:09     ` Michal Kazior
2014-05-23  7:09       ` Michal Kazior
2014-05-22 16:42   ` Kalle Valo [this message]
2014-05-22 16:42     ` Kalle Valo
2014-05-23  7:13     ` Michal Kazior
2014-05-23  7:13       ` Michal Kazior
2014-05-23  7:16       ` Kalle Valo
2014-05-23  7:16         ` Kalle Valo
2014-05-23 10:28 ` [PATCH 0/3] ath10k: async pci probing Michal Kazior
2014-05-23 10:28   ` Michal Kazior
2014-05-23 10:28   ` [PATCH v2 1/3] ath10k: relocate core create/destroy functions Michal Kazior
2014-05-23 10:28     ` Michal Kazior
2014-05-23 10:28   ` [PATCH v2 2/3] ath10k: remove unnecessary tasklet_kill() Michal Kazior
2014-05-23 10:28     ` Michal Kazior
2014-05-23 10:28   ` [PATCH v2 3/3] ath10k: make core registering async Michal Kazior
2014-05-23 10:28     ` Michal Kazior
2014-05-26  9:45   ` [PATCH 0/3] ath10k: async pci probing Kalle Valo
2014-05-26  9:45     ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87ppj5wyri.fsf@kamboji.qca.qualcomm.com \
    --to=kvalo@qca.qualcomm.com \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=michal.kazior@tieto.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.