From: Kalle Valo <kvalo@qca.qualcomm.com>
To: Simon Wunderlich <sw@simonwunderlich.de>
Cc: mathias.kretschmer@fokus.fraunhofer.de, kgiori@qca.qualcomm.com,
linux-wireless@vger.kernel.org, sven@narfation.org,
ath10k@lists.infradead.org
Subject: Re: [PATCHv2 2/2] ath10k: add spectral scan feature
Date: Mon, 21 Jul 2014 21:35:58 +0300 [thread overview]
Message-ID: <87r41ewodt.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <1405945943-8303-3-git-send-email-sw@simonwunderlich.de> (Simon Wunderlich's message of "Mon, 21 Jul 2014 14:32:23 +0200")
Simon Wunderlich <sw@simonwunderlich.de> writes:
> Adds the spectral scan feature for ath10k. The spectral scan is triggered by
> configuring a mode through a debugfs control file. Samples can be gathered via
> another relay debugfs file.
>
> Essentially, to try it out:
>
> ip link set dev wlan0 up
> echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
> iw dev wlan0 scan
> echo disable > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
> cat /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan0 > samples
>
> This feature is still experimental. Based on the original RFC patch of
> Sven Eckelmann.
>
> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
While I was commiting this to ath-next-test for build tests and review,
I had a trivial conflict. Please check the patch:
https://github.com/kvalo/ath/commit/85dec746d1f4728176bd06a53b6da4ef014f2a27
Oddly enough with this patch I see a new warning:
include/uapi/linux/swab.h:71:16: error: undefined identifier '__builtin_bswap64'
But I guess there's not much we can do about that?
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: Simon Wunderlich <sw@simonwunderlich.de>
Cc: <ath10k@lists.infradead.org>,
<mathias.kretschmer@fokus.fraunhofer.de>,
<kgiori@qca.qualcomm.com>, <linux-wireless@vger.kernel.org>,
<sven@narfation.org>
Subject: Re: [PATCHv2 2/2] ath10k: add spectral scan feature
Date: Mon, 21 Jul 2014 21:35:58 +0300 [thread overview]
Message-ID: <87r41ewodt.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <1405945943-8303-3-git-send-email-sw@simonwunderlich.de> (Simon Wunderlich's message of "Mon, 21 Jul 2014 14:32:23 +0200")
Simon Wunderlich <sw@simonwunderlich.de> writes:
> Adds the spectral scan feature for ath10k. The spectral scan is triggered by
> configuring a mode through a debugfs control file. Samples can be gathered via
> another relay debugfs file.
>
> Essentially, to try it out:
>
> ip link set dev wlan0 up
> echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
> iw dev wlan0 scan
> echo disable > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
> cat /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan0 > samples
>
> This feature is still experimental. Based on the original RFC patch of
> Sven Eckelmann.
>
> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
While I was commiting this to ath-next-test for build tests and review,
I had a trivial conflict. Please check the patch:
https://github.com/kvalo/ath/commit/85dec746d1f4728176bd06a53b6da4ef014f2a27
Oddly enough with this patch I see a new warning:
include/uapi/linux/swab.h:71:16: error: undefined identifier '__builtin_bswap64'
But I guess there's not much we can do about that?
--
Kalle Valo
next prev parent reply other threads:[~2014-07-21 18:36 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-21 12:32 [PATCHv2 0/2] ath10k spectral scan support Simon Wunderlich
2014-07-21 12:32 ` Simon Wunderlich
2014-07-21 12:32 ` [PATCHv2 1/2] ath: Move spectral debugfs structs to shared header Simon Wunderlich
2014-07-21 12:32 ` Simon Wunderlich
2014-07-21 12:32 ` [PATCHv2 2/2] ath10k: add spectral scan feature Simon Wunderlich
2014-07-21 12:32 ` Simon Wunderlich
2014-07-21 18:35 ` Kalle Valo [this message]
2014-07-21 18:35 ` Kalle Valo
2014-07-21 19:02 ` Sven Eckelmann
2014-07-21 19:02 ` Sven Eckelmann
2014-07-22 8:07 ` Michal Kazior
2014-07-22 8:07 ` Michal Kazior
2014-07-22 18:27 ` Kalle Valo
2014-07-22 18:27 ` Kalle Valo
2014-07-23 15:12 ` Simon Wunderlich
2014-07-23 15:12 ` Simon Wunderlich
2014-07-23 16:34 ` Kalle Valo
2014-07-23 16:34 ` Kalle Valo
2014-07-23 16:40 ` Simon Wunderlich
2014-07-23 16:40 ` Simon Wunderlich
2014-07-23 16:44 ` Kalle Valo
2014-07-23 16:44 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r41ewodt.fsf@kamboji.qca.qualcomm.com \
--to=kvalo@qca.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=kgiori@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=mathias.kretschmer@fokus.fraunhofer.de \
--cc=sven@narfation.org \
--cc=sw@simonwunderlich.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.