From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/3] ARM: mvebu: dts: updates to enable EDAC
Date: Fri, 12 Jan 2018 16:25:51 +0100 [thread overview]
Message-ID: <87shbb5cao.fsf@free-electrons.com> (raw)
In-Reply-To: <d2460bc23c4d4ff2adbd05821e86aea9@svr-chch-ex1.atlnz.lc> (Chris Packham's message of "Thu, 11 Jan 2018 20:06:01 +0000")
Hi Chris,
On jeu., janv. 11 2018, Chris Packham <Chris.Packham@alliedtelesis.co.nz> wrote:
> On 11/01/18 22:14, Gregory CLEMENT wrote:
>> Hi Chris,
>>
>> On jeu., janv. 11 2018, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>>
>>> I've split this off from my earlier series[1] this is just the dts changes that
>>> will enable support for the EDAC series when it lands.
>>>
>>> The Armada 38x as well as the 98dx3236 and similar switch chips with integrated
>>> CPUs use the same SDRAM controller block as the Armada XP. The key difference
>>> is the width of the DDR interface.
>>>
>>> [1] - https://marc.info/?l=linux-kernel&m=151545124505964&w=2
>>
>> The series is looks good now. For patch 1 I still wait for that
>> the "marvell,,ecc-enable" property was accepted before merging it.
>>
>> So I can either wait for that it was accepted before applying the series,
>> or just applying patch 2 and 3 for now, as you want.
>
> I'm happy either way. If it's easier for you to keep the 3 patches
> together that's fine by me.
So I will apply all of them in the same time.
Thanks,
Gregory
>
>>
>> Thanks,
>>
>> Gregory
>>
>>
>>>
>>> Changes in v2:
>>> - update commit message
>>> - add labels to dts
>>>
>>> Chris Packham (3):
>>> ARM: dts: armada-xp: enable L2 cache parity and ecc on db-xc3-24g4xg
>>> ARM: dts: armada-xp: add label to sdram-controller node
>>> ARM: dts: mvebu: add sdram controller node to Armada-38x
>>>
>>> arch/arm/boot/dts/armada-38x.dtsi | 5 +++++
>>> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 2 +-
>>> arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 5 +++++
>>> arch/arm/boot/dts/armada-xp.dtsi | 2 +-
>>> 4 files changed, 12 insertions(+), 2 deletions(-)
>>>
>>> --
>>> 2.15.1
>>>
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
Cc: "andrew@lunn.ch" <andrew@lunn.ch>,
"jason@lakedaemon.net" <jason@lakedaemon.net>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux@armlinux.org.uk" <linux@armlinux.org.uk>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"sebastian.hesselbarth@gmail.com"
<sebastian.hesselbarth@gmail.com>
Subject: Re: [PATCH v2 0/3] ARM: mvebu: dts: updates to enable EDAC
Date: Fri, 12 Jan 2018 16:25:51 +0100 [thread overview]
Message-ID: <87shbb5cao.fsf@free-electrons.com> (raw)
In-Reply-To: <d2460bc23c4d4ff2adbd05821e86aea9@svr-chch-ex1.atlnz.lc> (Chris Packham's message of "Thu, 11 Jan 2018 20:06:01 +0000")
Hi Chris,
On jeu., janv. 11 2018, Chris Packham <Chris.Packham@alliedtelesis.co.nz> wrote:
> On 11/01/18 22:14, Gregory CLEMENT wrote:
>> Hi Chris,
>>
>> On jeu., janv. 11 2018, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>>
>>> I've split this off from my earlier series[1] this is just the dts changes that
>>> will enable support for the EDAC series when it lands.
>>>
>>> The Armada 38x as well as the 98dx3236 and similar switch chips with integrated
>>> CPUs use the same SDRAM controller block as the Armada XP. The key difference
>>> is the width of the DDR interface.
>>>
>>> [1] - https://marc.info/?l=linux-kernel&m=151545124505964&w=2
>>
>> The series is looks good now. For patch 1 I still wait for that
>> the "marvell,,ecc-enable" property was accepted before merging it.
>>
>> So I can either wait for that it was accepted before applying the series,
>> or just applying patch 2 and 3 for now, as you want.
>
> I'm happy either way. If it's easier for you to keep the 3 patches
> together that's fine by me.
So I will apply all of them in the same time.
Thanks,
Gregory
>
>>
>> Thanks,
>>
>> Gregory
>>
>>
>>>
>>> Changes in v2:
>>> - update commit message
>>> - add labels to dts
>>>
>>> Chris Packham (3):
>>> ARM: dts: armada-xp: enable L2 cache parity and ecc on db-xc3-24g4xg
>>> ARM: dts: armada-xp: add label to sdram-controller node
>>> ARM: dts: mvebu: add sdram controller node to Armada-38x
>>>
>>> arch/arm/boot/dts/armada-38x.dtsi | 5 +++++
>>> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 2 +-
>>> arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 5 +++++
>>> arch/arm/boot/dts/armada-xp.dtsi | 2 +-
>>> 4 files changed, 12 insertions(+), 2 deletions(-)
>>>
>>> --
>>> 2.15.1
>>>
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
Cc: "andrew\@lunn.ch" <andrew@lunn.ch>,
"jason\@lakedaemon.net" <jason@lakedaemon.net>,
"devicetree\@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux\@armlinux.org.uk" <linux@armlinux.org.uk>,
"linux-kernel\@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"robh+dt\@kernel.org" <robh+dt@kernel.org>,
"linux-arm-kernel\@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"sebastian.hesselbarth\@gmail.com"
<sebastian.hesselbarth@gmail.com>
Subject: Re: [PATCH v2 0/3] ARM: mvebu: dts: updates to enable EDAC
Date: Fri, 12 Jan 2018 16:25:51 +0100 [thread overview]
Message-ID: <87shbb5cao.fsf@free-electrons.com> (raw)
In-Reply-To: <d2460bc23c4d4ff2adbd05821e86aea9@svr-chch-ex1.atlnz.lc> (Chris Packham's message of "Thu, 11 Jan 2018 20:06:01 +0000")
Hi Chris,
On jeu., janv. 11 2018, Chris Packham <Chris.Packham@alliedtelesis.co.nz> wrote:
> On 11/01/18 22:14, Gregory CLEMENT wrote:
>> Hi Chris,
>>
>> On jeu., janv. 11 2018, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>>
>>> I've split this off from my earlier series[1] this is just the dts changes that
>>> will enable support for the EDAC series when it lands.
>>>
>>> The Armada 38x as well as the 98dx3236 and similar switch chips with integrated
>>> CPUs use the same SDRAM controller block as the Armada XP. The key difference
>>> is the width of the DDR interface.
>>>
>>> [1] - https://marc.info/?l=linux-kernel&m=151545124505964&w=2
>>
>> The series is looks good now. For patch 1 I still wait for that
>> the "marvell,,ecc-enable" property was accepted before merging it.
>>
>> So I can either wait for that it was accepted before applying the series,
>> or just applying patch 2 and 3 for now, as you want.
>
> I'm happy either way. If it's easier for you to keep the 3 patches
> together that's fine by me.
So I will apply all of them in the same time.
Thanks,
Gregory
>
>>
>> Thanks,
>>
>> Gregory
>>
>>
>>>
>>> Changes in v2:
>>> - update commit message
>>> - add labels to dts
>>>
>>> Chris Packham (3):
>>> ARM: dts: armada-xp: enable L2 cache parity and ecc on db-xc3-24g4xg
>>> ARM: dts: armada-xp: add label to sdram-controller node
>>> ARM: dts: mvebu: add sdram controller node to Armada-38x
>>>
>>> arch/arm/boot/dts/armada-38x.dtsi | 5 +++++
>>> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 2 +-
>>> arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 5 +++++
>>> arch/arm/boot/dts/armada-xp.dtsi | 2 +-
>>> 4 files changed, 12 insertions(+), 2 deletions(-)
>>>
>>> --
>>> 2.15.1
>>>
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2018-01-12 15:25 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-11 1:59 [PATCH v2 0/3] ARM: mvebu: dts: updates to enable EDAC Chris Packham
2018-01-11 1:59 ` Chris Packham
2018-01-11 1:59 ` [PATCH v2 1/3] ARM: dts: armada-xp: enable L2 cache parity and ecc on db-xc3-24g4xg Chris Packham
2018-01-11 1:59 ` Chris Packham
2018-01-11 1:59 ` [PATCH v2 2/3] ARM: dts: armada-xp: add label to sdram-controller node Chris Packham
2018-01-11 1:59 ` Chris Packham
2018-01-11 1:59 ` Chris Packham
2018-01-11 1:59 ` [PATCH v2 3/3] ARM: dts: mvebu: add sdram controller node to Armada-38x Chris Packham
2018-01-11 1:59 ` Chris Packham
2018-01-11 1:59 ` Chris Packham
2018-01-11 9:14 ` [PATCH v2 0/3] ARM: mvebu: dts: updates to enable EDAC Gregory CLEMENT
2018-01-11 9:14 ` Gregory CLEMENT
2018-01-11 9:14 ` Gregory CLEMENT
2018-01-11 20:06 ` Chris Packham
2018-01-11 20:06 ` Chris Packham
2018-01-11 20:06 ` Chris Packham
2018-01-12 15:25 ` Gregory CLEMENT [this message]
2018-01-12 15:25 ` Gregory CLEMENT
2018-01-12 15:25 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87shbb5cao.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.