All of lore.kernel.org
 help / color / mirror / Atom feed
* ath10k-firmware: QCA9888 hw2.0: Update OpenMesh A62 specific BDFs
@ 2019-01-10 13:00 Sven Eckelmann
  2019-06-28 13:39 ` Kalle Valo
  0 siblings, 1 reply; 4+ messages in thread
From: Sven Eckelmann @ 2019-01-10 13:00 UTC (permalink / raw)
  To: ath10k


[-- Attachment #1.1.1: Type: text/plain, Size: 1573 bytes --]

Hi,

The OpenMesh A62 AP requires three special BDFs to get the Wi-Fi PHYs working 
(correctly). The  bmi-board-id='s would clash with one of the the IPQ401X 
AP-DK boards because QCA doesn't provide special IDs for customers and seems 
to use the AP-DK board-ids in the wifi firmware to change its behavior. This 
request contains the file for QCA9888. The QCA4019 one will be submitted 
in a different request.

This update contains:

* add of the antenna gain
* adjustments of the antenna sensitivity (see configAddr)
* CTLs for DFS channels


Now to the questions from the wiki page [1]:

* description for what hardware this is:

  - it is a QCA4018 based module (based on qcom-ipq4019-ap.dk04.1)
  - one QCA4018 radio is used as 2.4GHz radio
  - one QCA4018 radio is used as 5GHz radio
  - an additional QCA9888 5GHz radio is attached via PCI

* origin of the board file (did you create it yourself or where you
  downloaded)

  - it was created by the ODM and QCA for the OpenMesh A62
  - was provided by the ODM to OpenMesh for this product (this includes
    distribution)
  - it is the latest release from 2018-11-28

* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)

  - QCA9888 hw2.0

    + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62
      md5sum: 60f36b31866f5797aa7a857ed24b6913
      
* attach the actual board file (board.bin)

  - The name of the files are equal to the id string in the board-2.bin
    (minus the ".bin")

Kind regards,
        Sven

[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles

[-- Attachment #1.1.2: bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 4+ messages in thread
* ath10k-firmware: QCA9888 hw2.0: Update OpenMesh A62 specific BDFs
@ 2019-07-01  9:43 Sven Eckelmann
  2022-01-21 14:00 ` Kalle Valo
  0 siblings, 1 reply; 4+ messages in thread
From: Sven Eckelmann @ 2019-07-01  9:43 UTC (permalink / raw)
  To: ath10k


[-- Attachment #1.1.1: Type: text/plain, Size: 1790 bytes --]

[resent of mail from 2019-06-11; seems like @datto.com mail server ate the
 outgoing mails]

Hi,

The OpenMesh A62 AP requires three special BDFs to get the Wi-Fi PHYs working 
(correctly). The  bmi-board-id='s would clash with one of the the IPQ401X 
AP-DK boards because QCA doesn't provide special IDs for customers and seems 
to use the AP-DK board-ids in the wifi firmware to change its behavior. This 
request contains the file for QCA9888. The QCA4019 one will be submitted 
in a different request.

This update contains:

* add of the antenna gain
* adjustments of the antenna sensitivity (see configAddr)
* CTLs for DFS channels

It supersedes https://lkml.kernel.org/r/1573300.yjC3Zj7d1F@bentobox


Now to the questions from the wiki page [1]:

* description for what hardware this is:

  - it is a QCA4018 based module (based on qcom-ipq4019-ap.dk04.1)
  - one QCA4018 radio is used as 2.4GHz radio
  - one QCA4018 radio is used as 5GHz radio
  - an additional QCA9888 5GHz radio is attached via PCI

* origin of the board file (did you create it yourself or where you
  downloaded)

  - it was created by the ODM and QCA for the OpenMesh A62
  - was provided by the ODM to OpenMesh for this product (this includes
    distribution)
  - it is the latest release from 2018-11-28 (with fix to have
    antennagain at correct position)

* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)

  - QCA9888 hw2.0

    + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62
      md5sum: f8ed39484f5e86d16b6a4377ce8a5243
      
* attach the actual board file (board.bin)

  - The name of the files are equal to the id string in the board-2.bin
    (minus the ".bin")

Kind regards,
        Sven

[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles

[-- Attachment #1.1.2: bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62.bin --]
[-- Type: application/x-saturn-rom, Size: 12064 bytes --]

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-01-21 14:00 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-01-10 13:00 ath10k-firmware: QCA9888 hw2.0: Update OpenMesh A62 specific BDFs Sven Eckelmann
2019-06-28 13:39 ` Kalle Valo
  -- strict thread matches above, loose matches on Subject: below --
2019-07-01  9:43 Sven Eckelmann
2022-01-21 14:00 ` Kalle Valo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.