* [PATCH RESEND v2] arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1 @ 2017-09-22 13:08 ` Miquel Raynal 0 siblings, 0 replies; 4+ messages in thread From: Miquel Raynal @ 2017-09-22 13:08 UTC (permalink / raw) To: linux-arm-kernel From: Christine Gharzuzi <chrisg@marvell.com> Add the DT node enabling Armada-8040-DB CPS SPI controller driver. Add the SPI NAND flash device connected on the bus. Fill the MTD partitions layout. Signed-off-by: Christine Gharzuzi <chrisg@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> --- Hello, Made a mistake resending the v1 prefixed by v2. This is the real v2. It fixes the third partition address from 0xd00000 to 0xf00000. Thanks, Miqu?l arch/arm64/boot/dts/marvell/armada-8040-db.dts | 31 ++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 0d7b2ae46610..85c72f835184 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -216,6 +216,37 @@ clock-frequency = <100000>; }; +&cps_spi1 { + status = "okay"; + + spi-flash at 0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition at 0 { + label = "Boot"; + reg = <0x0 0x200000>; + }; + partition at 200000 { + label = "Filesystem"; + reg = <0x200000 0xd00000>; + }; + partition at f00000 { + label = "Boot_2nd"; + reg = <0xf00000 0x100000>; + }; + }; + }; +}; + /* CON4 on CP1 expansion */ &cps_sata0 { status = "okay"; -- 2.11.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH RESEND v2] arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1 @ 2017-09-22 13:08 ` Miquel Raynal 0 siblings, 0 replies; 4+ messages in thread From: Miquel Raynal @ 2017-09-22 13:08 UTC (permalink / raw) To: Gregory Clement, Jason Cooper, Andrew Lunn, Sebastian Hesselbarth, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: Thomas Petazzoni, Antoine Tenart, Nadav Haklai, Miquel Raynal, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Christine Gharzuzi From: Christine Gharzuzi <chrisg-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org> Add the DT node enabling Armada-8040-DB CPS SPI controller driver. Add the SPI NAND flash device connected on the bus. Fill the MTD partitions layout. Signed-off-by: Christine Gharzuzi <chrisg-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org> Signed-off-by: Miquel Raynal <miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> --- Hello, Made a mistake resending the v1 prefixed by v2. This is the real v2. It fixes the third partition address from 0xd00000 to 0xf00000. Thanks, Miquèl arch/arm64/boot/dts/marvell/armada-8040-db.dts | 31 ++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 0d7b2ae46610..85c72f835184 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -216,6 +216,37 @@ clock-frequency = <100000>; }; +&cps_spi1 { + status = "okay"; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Boot"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "Filesystem"; + reg = <0x200000 0xd00000>; + }; + partition@f00000 { + label = "Boot_2nd"; + reg = <0xf00000 0x100000>; + }; + }; + }; +}; + /* CON4 on CP1 expansion */ &cps_sata0 { status = "okay"; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH RESEND v2] arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1 @ 2017-09-25 16:04 ` Gregory CLEMENT 0 siblings, 0 replies; 4+ messages in thread From: Gregory CLEMENT @ 2017-09-25 16:04 UTC (permalink / raw) To: linux-arm-kernel Hi Miquel, On ven., sept. 22 2017, Miquel Raynal <miquel.raynal@free-electrons.com> wrote: > From: Christine Gharzuzi <chrisg@marvell.com> > > Add the DT node enabling Armada-8040-DB CPS SPI controller driver. > > Add the SPI NAND flash device connected on the bus. Fill the MTD > partitions layout. > > Signed-off-by: Christine Gharzuzi <chrisg@marvell.com> > Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Applied on mvebu/dt64 Thanks, Gregory > --- > > Hello, > > Made a mistake resending the v1 prefixed by v2. > This is the real v2. > > It fixes the third partition address from 0xd00000 to 0xf00000. > > Thanks, > Miqu?l > > arch/arm64/boot/dts/marvell/armada-8040-db.dts | 31 ++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts > index 0d7b2ae46610..85c72f835184 100644 > --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts > +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts > @@ -216,6 +216,37 @@ > clock-frequency = <100000>; > }; > > +&cps_spi1 { > + status = "okay"; > + > + spi-flash at 0 { > + #address-cells = <0x1>; > + #size-cells = <0x1>; > + compatible = "jedec,spi-nor"; > + reg = <0x0>; > + spi-max-frequency = <20000000>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition at 0 { > + label = "Boot"; > + reg = <0x0 0x200000>; > + }; > + partition at 200000 { > + label = "Filesystem"; > + reg = <0x200000 0xd00000>; > + }; > + partition at f00000 { > + label = "Boot_2nd"; > + reg = <0xf00000 0x100000>; > + }; > + }; > + }; > +}; > + > /* CON4 on CP1 expansion */ > &cps_sata0 { > status = "okay"; > -- > 2.11.0 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH RESEND v2] arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1 @ 2017-09-25 16:04 ` Gregory CLEMENT 0 siblings, 0 replies; 4+ messages in thread From: Gregory CLEMENT @ 2017-09-25 16:04 UTC (permalink / raw) To: Miquel Raynal Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth, devicetree-u79uwXL29TY76Z2rM5mHXA, Thomas Petazzoni, Antoine Tenart, Nadav Haklai, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Christine Gharzuzi Hi Miquel, On ven., sept. 22 2017, Miquel Raynal <miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote: > From: Christine Gharzuzi <chrisg-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org> > > Add the DT node enabling Armada-8040-DB CPS SPI controller driver. > > Add the SPI NAND flash device connected on the bus. Fill the MTD > partitions layout. > > Signed-off-by: Christine Gharzuzi <chrisg-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org> > Signed-off-by: Miquel Raynal <miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> Applied on mvebu/dt64 Thanks, Gregory > --- > > Hello, > > Made a mistake resending the v1 prefixed by v2. > This is the real v2. > > It fixes the third partition address from 0xd00000 to 0xf00000. > > Thanks, > Miquèl > > arch/arm64/boot/dts/marvell/armada-8040-db.dts | 31 ++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts > index 0d7b2ae46610..85c72f835184 100644 > --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts > +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts > @@ -216,6 +216,37 @@ > clock-frequency = <100000>; > }; > > +&cps_spi1 { > + status = "okay"; > + > + spi-flash@0 { > + #address-cells = <0x1>; > + #size-cells = <0x1>; > + compatible = "jedec,spi-nor"; > + reg = <0x0>; > + spi-max-frequency = <20000000>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "Boot"; > + reg = <0x0 0x200000>; > + }; > + partition@200000 { > + label = "Filesystem"; > + reg = <0x200000 0xd00000>; > + }; > + partition@f00000 { > + label = "Boot_2nd"; > + reg = <0xf00000 0x100000>; > + }; > + }; > + }; > +}; > + > /* CON4 on CP1 expansion */ > &cps_sata0 { > status = "okay"; > -- > 2.11.0 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-09-25 16:04 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-09-22 13:08 [PATCH RESEND v2] arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1 Miquel Raynal 2017-09-22 13:08 ` Miquel Raynal 2017-09-25 16:04 ` Gregory CLEMENT 2017-09-25 16:04 ` Gregory CLEMENT
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.