* [Buildroot] [PATCH v2 2/4] board: orangepi: Add Orangepi One Plus support
2018-11-03 12:56 [Buildroot] [PATCH 1/4] uboot: bump to version 2018.09 Jagan Teki
@ 2018-11-03 12:56 ` Jagan Teki
2018-11-03 19:27 ` Baruch Siach
2018-12-16 15:00 ` Thomas Petazzoni
2018-11-03 12:56 ` [Buildroot] [PATCH 3/4] board: orangepi: Add Orangepi Lite2 support Jagan Teki
` (2 subsequent siblings)
3 siblings, 2 replies; 9+ messages in thread
From: Jagan Teki @ 2018-11-03 12:56 UTC (permalink / raw)
To: buildroot
Add initial support for Orangepi One Plus board
with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- Use mainline u-boot
- Use tag in Linux
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 +
.../orangepi/orangepi-one-plus/extlinux.conf | 4 ++
board/orangepi/orangepi-one-plus/genimage.cfg | 33 +++++++++++++
.../orangepi/orangepi-one-plus/post-build.sh | 4 ++
board/orangepi/orangepi-one-plus/readme.txt | 37 +++++++++++++++
configs/orangepi_one_plus_defconfig | 46 +++++++++++++++++++
7 files changed, 127 insertions(+)
create mode 100644 board/orangepi/orangepi-one-plus/extlinux.conf
create mode 100644 board/orangepi/orangepi-one-plus/genimage.cfg
create mode 100755 board/orangepi/orangepi-one-plus/post-build.sh
create mode 100644 board/orangepi/orangepi-one-plus/readme.txt
create mode 100644 configs/orangepi_one_plus_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 8b9a1f175c..f670e3dbb7 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -185,6 +185,7 @@ olimex_imx233_olinuxino_defconfig: *defconfig
openblocks_a6_defconfig: *defconfig
orangepi_lite_defconfig: *defconfig
orangepi_one_defconfig: *defconfig
+orangepi_one_plus_defconfig: *defconfig
orangepi_pc2_defconfig: *defconfig
orangepi_pc_defconfig: *defconfig
orangepi_pc_plus_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index a3d97eb390..401e0cb770 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -954,6 +954,7 @@ F: board/engicam/
F: board/friendlyarm/nanopi-a64/
F: board/friendlyarm/nanopi-neo2/
F: board/olimex/a64-olinuxino/
+F: board/orangepi/orangepi-one-plus
F: board/orangepi/orangepi-pc2/
F: board/orangepi/orangepi-prime/
F: board/orangepi/orangepi-win/
@@ -971,6 +972,7 @@ F: configs/engicam_imx6ul_isiot_defconfig
F: configs/friendlyarm_nanopi_a64_defconfig
F: configs/friendlyarm_nanopi_neo2_defconfig
F: configs/olimex_a64_olinuxino_defconfig
+F: configs/orangepi_one_plus_defconfig
F: configs/orangepi_pc2_defconfig
F: configs/orangepi_prime_defconfig
F: configs/orangepi_win_defconfig
diff --git a/board/orangepi/orangepi-one-plus/extlinux.conf b/board/orangepi/orangepi-one-plus/extlinux.conf
new file mode 100644
index 0000000000..eae328449c
--- /dev/null
+++ b/board/orangepi/orangepi-one-plus/extlinux.conf
@@ -0,0 +1,4 @@
+label linux-4.18.0-rc3
+ kernel /Image
+ devicetree /sun50i-h6-orangepi-one-plus.dtb
+ append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
diff --git a/board/orangepi/orangepi-one-plus/genimage.cfg b/board/orangepi/orangepi-one-plus/genimage.cfg
new file mode 100644
index 0000000000..ebb07e8b26
--- /dev/null
+++ b/board/orangepi/orangepi-one-plus/genimage.cfg
@@ -0,0 +1,33 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-h6-orangepi-one-plus.dtb",
+ "extlinux"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot-sunxi-with-spl.bin"
+ offset = 8192
+ size = 1040384 # 1MB - 8192
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/orangepi/orangepi-one-plus/post-build.sh b/board/orangepi/orangepi-one-plus/post-build.sh
new file mode 100755
index 0000000000..ec20fca7d9
--- /dev/null
+++ b/board/orangepi/orangepi-one-plus/post-build.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/orangepi/orangepi-one-plus/readme.txt b/board/orangepi/orangepi-one-plus/readme.txt
new file mode 100644
index 0000000000..87f6de8510
--- /dev/null
+++ b/board/orangepi/orangepi-one-plus/readme.txt
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Orangepi One Plus. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Orangepi One Plus link:
+http://www.orangepi.org/OrangePiOneplus/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+One+Plus
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make orangepi_one_plus_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Orangepi One Plus and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig
new file mode 100644
index 0000000000..d950f16610
--- /dev/null
+++ b/configs/orangepi_one_plus_defconfig
@@ -0,0 +1,46 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.18 series
+BR2_KERNEL_HEADERS_4_18=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_one_plus"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,amarula,linux-amarula,h6-v1.0b)/linux-amarula_h6-v1.0b.tar.gz"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-orangepi-one-plus"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi One+"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-one-plus/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-one-plus/post-build.sh"
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Buildroot] [PATCH v2 2/4] board: orangepi: Add Orangepi One Plus support
2018-11-03 12:56 ` [Buildroot] [PATCH v2 2/4] board: orangepi: Add Orangepi One Plus support Jagan Teki
@ 2018-11-03 19:27 ` Baruch Siach
2018-12-16 15:00 ` Thomas Petazzoni
1 sibling, 0 replies; 9+ messages in thread
From: Baruch Siach @ 2018-11-03 19:27 UTC (permalink / raw)
To: buildroot
Hi Jagan,
Jagan Teki writes:
> diff --git a/board/orangepi/orangepi-one-plus/extlinux.conf b/board/orangepi/orangepi-one-plus/extlinux.conf
> new file mode 100644
> index 0000000000..eae328449c
> --- /dev/null
> +++ b/board/orangepi/orangepi-one-plus/extlinux.conf
> @@ -0,0 +1,4 @@
> +label linux-4.18.0-rc3
This doesn't match the actual kernel version. I think you can just drop
the version from the label. It is easy to forget keeping it in sync with
the kernel version.
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 9+ messages in thread* [Buildroot] [PATCH v2 2/4] board: orangepi: Add Orangepi One Plus support
2018-11-03 12:56 ` [Buildroot] [PATCH v2 2/4] board: orangepi: Add Orangepi One Plus support Jagan Teki
2018-11-03 19:27 ` Baruch Siach
@ 2018-12-16 15:00 ` Thomas Petazzoni
1 sibling, 0 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2018-12-16 15:00 UTC (permalink / raw)
To: buildroot
Hello,
On Sat, 3 Nov 2018 18:26:06 +0530, Jagan Teki wrote:
> Add initial support for Orangepi One Plus board
> with below features:
> - U-Boot 2018.09
> - Linux 4.19.0-rc8
> - Default packages from buildroot
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - Use mainline u-boot
> - Use tag in Linux
Applied to master after fixing the extlinux.conf to drop the version of
the Linux kernel.
Also, is this board now supported in upstream U-Boot and Linux? If so,
it would be nice to use that.
Thanks,
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 3/4] board: orangepi: Add Orangepi Lite2 support
2018-11-03 12:56 [Buildroot] [PATCH 1/4] uboot: bump to version 2018.09 Jagan Teki
2018-11-03 12:56 ` [Buildroot] [PATCH v2 2/4] board: orangepi: Add Orangepi One Plus support Jagan Teki
@ 2018-11-03 12:56 ` Jagan Teki
2018-12-16 15:00 ` Thomas Petazzoni
2018-11-03 12:56 ` [Buildroot] [PATCH 4/4] board: orangepi: lite2: Add WiFi support Jagan Teki
2018-11-03 14:56 ` [Buildroot] [PATCH 1/4] uboot: bump to version 2018.09 Thomas Petazzoni
3 siblings, 1 reply; 9+ messages in thread
From: Jagan Teki @ 2018-11-03 12:56 UTC (permalink / raw)
To: buildroot
Add initial support for Orangepi Lite2 board
with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 +
board/orangepi/orangepi-lite2/extlinux.conf | 4 ++
board/orangepi/orangepi-lite2/genimage.cfg | 33 +++++++++++++++
board/orangepi/orangepi-lite2/post-build.sh | 4 ++
board/orangepi/orangepi-lite2/readme.txt | 35 +++++++++++++++
configs/orangepi_lite2_defconfig | 47 +++++++++++++++++++++
7 files changed, 126 insertions(+)
create mode 100644 board/orangepi/orangepi-lite2/extlinux.conf
create mode 100644 board/orangepi/orangepi-lite2/genimage.cfg
create mode 100755 board/orangepi/orangepi-lite2/post-build.sh
create mode 100644 board/orangepi/orangepi-lite2/readme.txt
create mode 100644 configs/orangepi_lite2_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index f670e3dbb7..ad077c84f3 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -184,6 +184,7 @@ olimex_a64_olinuxino_defconfig: *defconfig
olimex_imx233_olinuxino_defconfig: *defconfig
openblocks_a6_defconfig: *defconfig
orangepi_lite_defconfig: *defconfig
+orangepi_lite2_defconfig: *defconfig
orangepi_one_defconfig: *defconfig
orangepi_one_plus_defconfig: *defconfig
orangepi_pc2_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 401e0cb770..497b18e396 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -954,6 +954,7 @@ F: board/engicam/
F: board/friendlyarm/nanopi-a64/
F: board/friendlyarm/nanopi-neo2/
F: board/olimex/a64-olinuxino/
+F: board/orangepi/orangepi-lite2/
F: board/orangepi/orangepi-one-plus
F: board/orangepi/orangepi-pc2/
F: board/orangepi/orangepi-prime/
@@ -972,6 +973,7 @@ F: configs/engicam_imx6ul_isiot_defconfig
F: configs/friendlyarm_nanopi_a64_defconfig
F: configs/friendlyarm_nanopi_neo2_defconfig
F: configs/olimex_a64_olinuxino_defconfig
+F: configs/orangepi_lite2_defconfig
F: configs/orangepi_one_plus_defconfig
F: configs/orangepi_pc2_defconfig
F: configs/orangepi_prime_defconfig
diff --git a/board/orangepi/orangepi-lite2/extlinux.conf b/board/orangepi/orangepi-lite2/extlinux.conf
new file mode 100644
index 0000000000..610e864373
--- /dev/null
+++ b/board/orangepi/orangepi-lite2/extlinux.conf
@@ -0,0 +1,4 @@
+label linux-4.18.0-rc3
+ kernel /Image
+ devicetree /sun50i-h6-orangepi-lite2.dtb
+ append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
diff --git a/board/orangepi/orangepi-lite2/genimage.cfg b/board/orangepi/orangepi-lite2/genimage.cfg
new file mode 100644
index 0000000000..97251b483f
--- /dev/null
+++ b/board/orangepi/orangepi-lite2/genimage.cfg
@@ -0,0 +1,33 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-h6-orangepi-lite2.dtb",
+ "extlinux"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot-sunxi-with-spl.bin"
+ offset = 8192
+ size = 1040384 # 1MB - 8192
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/orangepi/orangepi-lite2/post-build.sh b/board/orangepi/orangepi-lite2/post-build.sh
new file mode 100755
index 0000000000..ec20fca7d9
--- /dev/null
+++ b/board/orangepi/orangepi-lite2/post-build.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/orangepi/orangepi-lite2/readme.txt b/board/orangepi/orangepi-lite2/readme.txt
new file mode 100644
index 0000000000..abca9da6da
--- /dev/null
+++ b/board/orangepi/orangepi-lite2/readme.txt
@@ -0,0 +1,35 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Orangepi Lite2. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Orangepi Lite2 link:
+http://www.orangepi.org/Orange%20Pi%20Lite%202/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Lite2
+
+How to build
+============
+
+ $ make orangepi_lite2_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Orangepi Lite2 and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig
new file mode 100644
index 0000000000..29e648c9b0
--- /dev/null
+++ b/configs/orangepi_lite2_defconfig
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.18 series
+BR2_KERNEL_HEADERS_4_18=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="h6-v1.0a"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_lite2"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,amarula,linux-amarula,h6-v1.0b)/linux-amarula_h6-v1.0b.tar.gz"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-orangepi-lite2"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Lite2"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-lite2/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-lite2/post-build.sh"
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Buildroot] [PATCH 3/4] board: orangepi: Add Orangepi Lite2 support
2018-11-03 12:56 ` [Buildroot] [PATCH 3/4] board: orangepi: Add Orangepi Lite2 support Jagan Teki
@ 2018-12-16 15:00 ` Thomas Petazzoni
0 siblings, 0 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2018-12-16 15:00 UTC (permalink / raw)
To: buildroot
Hello,
On Sat, 3 Nov 2018 18:26:07 +0530, Jagan Teki wrote:
> Add initial support for Orangepi Lite2 board
> with below features:
> - U-Boot 2018.09
> - Linux 4.19.0-rc8
> - Default packages from buildroot
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> .gitlab-ci.yml | 1 +
> DEVELOPERS | 2 +
> board/orangepi/orangepi-lite2/extlinux.conf | 4 ++
> board/orangepi/orangepi-lite2/genimage.cfg | 33 +++++++++++++++
> board/orangepi/orangepi-lite2/post-build.sh | 4 ++
> board/orangepi/orangepi-lite2/readme.txt | 35 +++++++++++++++
> configs/orangepi_lite2_defconfig | 47 +++++++++++++++++++++
> 7 files changed, 126 insertions(+)
> create mode 100644 board/orangepi/orangepi-lite2/extlinux.conf
> create mode 100644 board/orangepi/orangepi-lite2/genimage.cfg
> create mode 100755 board/orangepi/orangepi-lite2/post-build.sh
> create mode 100644 board/orangepi/orangepi-lite2/readme.txt
> create mode 100644 configs/orangepi_lite2_defconfig
Applied to master after adjusting extlinux.conf as well. Also, please
send an update to the defconfig once this board is supported in
upstream U-Boot and Linux.
Thanks,
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 4/4] board: orangepi: lite2: Add WiFi support
2018-11-03 12:56 [Buildroot] [PATCH 1/4] uboot: bump to version 2018.09 Jagan Teki
2018-11-03 12:56 ` [Buildroot] [PATCH v2 2/4] board: orangepi: Add Orangepi One Plus support Jagan Teki
2018-11-03 12:56 ` [Buildroot] [PATCH 3/4] board: orangepi: Add Orangepi Lite2 support Jagan Teki
@ 2018-11-03 12:56 ` Jagan Teki
2018-12-16 15:00 ` Thomas Petazzoni
2018-11-03 14:56 ` [Buildroot] [PATCH 1/4] uboot: bump to version 2018.09 Thomas Petazzoni
3 siblings, 1 reply; 9+ messages in thread
From: Jagan Teki @ 2018-11-03 12:56 UTC (permalink / raw)
To: buildroot
Orangepi lite2 board has AP6356S WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add broadcom wireless firmware package to image
- add basic wireless tools to image
- add rootfs overlay with proper NVRAM file for on-board AP6356S chip
- add mdev to image to enable module autoloading
- update readme.txt to test wifi
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
board/orangepi/orangepi-lite2/readme.txt | 9 ++
.../lib/firmware/brcm/brcmfmac43455-sdio.txt | 82 +++++++++++++++++++
configs/orangepi_lite2_defconfig | 13 +++
3 files changed, 104 insertions(+)
create mode 100755 board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt
diff --git a/board/orangepi/orangepi-lite2/readme.txt b/board/orangepi/orangepi-lite2/readme.txt
index abca9da6da..bed561b562 100644
--- a/board/orangepi/orangepi-lite2/readme.txt
+++ b/board/orangepi/orangepi-lite2/readme.txt
@@ -33,3 +33,12 @@ Copy the bootable "sdcard.img" onto an SD card with "dd":
Insert the micro SDcard in your Orangepi Lite2 and power it up. The console
is on the serial line, 115200 8N1.
+
+WiFi
+====
+
+ # wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf
+ (type password and enter)
+ # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
+ # udhcpc -i wlan0
+ # ping google.com
diff --git a/board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt b/board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt
new file mode 100755
index 0000000000..c1cc4c3c2e
--- /dev/null
+++ b/board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt
@@ -0,0 +1,82 @@
+#AP6255_NVRAM_V1.0_29052015
+
+NVRAMRev=$Rev: 498373 $
+sromrev=11
+vendid=0x14e4
+devid=0x43ab
+manfid=0x2d0
+prodid=0x06e4
+macaddr=00:90:4c:c5:12:38
+nocrc=1
+boardtype=0x6e4
+boardrev=0x1304
+xtalfreq=37400
+#boardflags: 5GHz eTR switch by default
+#2.4GHz eTR switch by default
+#bit1 for btcoex
+boardflags=0x00080201
+boardflags2=0x40000000
+boardflags3=0x48200100
+rxgains2gelnagaina0=0
+rxgains2gtrisoa0=0
+rxgains2gtrelnabypa0=0
+rxgains5gelnagaina0=0
+rxgains5gtrisoa0=0
+rxgains5gtrelnabypa0=0
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+tssipos5g=1
+tssipos2g=1
+femctrl=0
+AvVmid_c0=0,157,1,126,1,126,1,126,1,126
+pa2ga0=-112,6296,-662
+pa2ga1=-165,3699,-515
+pa5ga0=-143,6016,-683,-141,6013,-678,-137,5988,-670,-136,5982,-670
+pa5ga1=-161,3544,-499,-166,3543,-497,-169,3569,-497,-171,3598,-498
+itrsw=1
+pdoffset2g40ma0=10
+pdoffset40ma0=0xaaaa
+pdoffset80ma0=0xaaaa
+extpagain5g=2
+extpagain2g=2
+tworangetssi2g=1
+tworangetssi5g=1
+# LTECX flags
+# WCI2
+ltecxmux=0
+ltecxpadnum=0x0504
+ltecxfnsel=0x22
+ltecxgcigpio=0x32
+
+maxp2ga0=64
+ofdmlrbw202gpo=0x0033
+dot11agofdmhrbw202gpo=0x1553
+mcsbw202gpo=0x99355533
+
+maxp5ga0=80,82,76,77
+
+mcsbw205glpo=0x99755000
+mcsbw205gmpo=0x9df55000
+mcsbw205ghpo=0x99855000
+
+mcsbw405glpo=0xb8555000
+mcsbw405gmpo=0xed955000
+mcsbw405ghpo=0xd9755000
+
+mcsbw805glpo=0xc8555000
+mcsbw805gmpo=0xe9555000
+mcsbw805ghpo=0xd9555000
+
+swctrlmap_2g=0x00040004,0x00020002,0x00040004,0x010a02,0x1ff
+swctrlmap_5g=0x00100010,0x00200020,0x00100010,0x010a02,0x2f4
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+
+vcodivmode=1
+deadman_to=481500000
+ed_thresh2g=-54
+ed_thresh5g=-54
+
+muxenab=0x10
diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig
index 29e648c9b0..16d73e14ae 100644
--- a/configs/orangepi_lite2_defconfig
+++ b/configs/orangepi_lite2_defconfig
@@ -42,6 +42,19 @@ BR2_TARGET_ROOTFS_EXT2_4=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-lite2/genimage.cfg"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-lite2/post-build.sh"
+BR2_ROOTFS_OVERLAY="board/orangepi/orangepi-lite2/rootfs_overlay"
+
+# wireless firmware
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
+
+# wireless tools
+BR2_PACKAGE_IW=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
+BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 4/4] board: orangepi: lite2: Add WiFi support
2018-11-03 12:56 ` [Buildroot] [PATCH 4/4] board: orangepi: lite2: Add WiFi support Jagan Teki
@ 2018-12-16 15:00 ` Thomas Petazzoni
0 siblings, 0 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2018-12-16 15:00 UTC (permalink / raw)
To: buildroot
Hello,
On Sat, 3 Nov 2018 18:26:08 +0530, Jagan Teki wrote:
> Orangepi lite2 board has AP6356S WiFi/BT combo, but does
> not have ethernet port. So it makes sense to enable wireless
> networking by default:
> - add broadcom wireless firmware package to image
> - add basic wireless tools to image
> - add rootfs overlay with proper NVRAM file for on-board AP6356S chip
> - add mdev to image to enable module autoloading
> - update readme.txt to test wifi
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> board/orangepi/orangepi-lite2/readme.txt | 9 ++
> .../lib/firmware/brcm/brcmfmac43455-sdio.txt | 82 +++++++++++++++++++
> configs/orangepi_lite2_defconfig | 13 +++
> 3 files changed, 104 insertions(+)
> create mode 100755 board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt
Applied to master, thanks.
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 1/4] uboot: bump to version 2018.09
2018-11-03 12:56 [Buildroot] [PATCH 1/4] uboot: bump to version 2018.09 Jagan Teki
` (2 preceding siblings ...)
2018-11-03 12:56 ` [Buildroot] [PATCH 4/4] board: orangepi: lite2: Add WiFi support Jagan Teki
@ 2018-11-03 14:56 ` Thomas Petazzoni
3 siblings, 0 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2018-11-03 14:56 UTC (permalink / raw)
To: buildroot
Hello,
On Sat, 3 Nov 2018 18:26:05 +0530, Jagan Teki wrote:
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> boot/uboot/Config.in | 4 ++--
> boot/uboot/uboot.hash | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
Applied to master, thanks.
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 9+ messages in thread