Re: [PATCH v8] staging: rtl8723bs: remove commented-out code

[Luka Gejak <luka.gejak@linux.dev>]

On March 28, 2026 4:31:28 AM GMT+01:00, Aadarsh Mandal <aadarshmandal9354@gmail.com> wrote:
>Remove code that is not used anywhere in driver.
>
>Signed-off-by: Aadarsh Mandal <aadarshmandal9354@gmail.com>
>---
>v7:
> - Change in commit style.
>v6:
> - Change in commit style.
>v5:
> - Change in commit style.
>v4:
> - Remove extra space insertion.
> - Delete remaining commented-out code.
>v3:
> - Add the extra space that count as insertion.
> - Remove unwanted addition.
>v2:
> - Restore braces for standalone code blocks {}.
> - Delete reindented commented-out code and extra space.
>v1:
> - Reindented commented-out code;extra space remained.
>---
> drivers/staging/rtl8723bs/hal/sdio_halinit.c | 31 +-------------------
> 1 file changed, 1 insertion(+), 30 deletions(-)
>
>diff --git a/drivers/staging/rtl8723bs/hal/sdio_halinit.c b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
>index f2f73c65a636..d0b0e7adb68f 100644
>--- a/drivers/staging/rtl8723bs/hal/sdio_halinit.c
>+++ b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
>@@ -46,8 +46,6 @@ u8 _InitPowerOn_8723BS(struct adapter *padapter)
> 	u16 value16;
> 	u32 value32;
> 	u8 ret;
>-/* 	u8 bMacPwrCtrlOn; */
>-
> 
> 	/*  all of these MUST be configured before power on */
> 
>@@ -69,10 +67,6 @@ u8 _InitPowerOn_8723BS(struct adapter *padapter)
> 	value16 |= EnPDN; /*  Enable HW power down and RF on */
> 	rtw_write16(padapter, REG_APS_FSMCO, value16);
> 
>-	/*  Enable CMD53 R/W Operation */
>-/* 	bMacPwrCtrlOn = true; */
>-/* 	rtw_hal_set_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); */
>-
> 	rtw_write8(padapter, REG_CR, 0x00);
> 	/*  Enable MAC DMA/WMAC/SCHEDULE/SEC block */
> 	value16 = rtw_read16(padapter, REG_CR);
>@@ -359,7 +353,6 @@ static void _InitNetworkType(struct adapter *padapter)
> 	value32 = rtw_read32(padapter, REG_CR);
> 
> 	/*  TODO: use the other function to set network type */
>-/* 	value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AD_HOC); */
> 	value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AP);
> 
> 	rtw_write32(padapter, REG_CR, value32);
>@@ -410,9 +403,6 @@ static void _InitAdaptiveCtrl(struct adapter *padapter)
> 	value32 |= RATE_RRSR_CCK_ONLY_1M;
> 	rtw_write32(padapter, REG_RRSR, value32);
> 
>-	/*  CF-END Threshold */
>-	/* m_spIoBase->rtw_write8(REG_CFEND_TH, 0x1); */
>-
> 	/*  SIFS (used in NAV) */
> 	value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10);
> 	rtw_write16(padapter, REG_SPEC_SIFS, value16);
>@@ -484,10 +474,7 @@ static void sdio_AggSettingRxUpdate(struct adapter *padapter)
> 
> static void _initSdioAggregationSetting(struct adapter *padapter)
> {
>-	struct hal_com_data	*pHalData = GET_HAL_DATA(padapter);
>-
>-	/*  Tx aggregation setting */
>-/* 	sdio_AggSettingTxUpdate(padapter); */
>+	struct hal_com_data *pHalData = GET_HAL_DATA(padapter);
> 
> 	/*  Rx aggregation setting */
> 	HalRxAggr8723BSdio(padapter);
>@@ -640,9 +627,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
> 		return _SUCCESS;
> 	}
> 
>-	/*  Disable Interrupt first. */
>-/* 	rtw_hal_disable_interrupt(padapter); */
>-
> 	ret = _InitPowerOn_8723BS(padapter);
> 	if (ret == _FAIL)
> 		return _FAIL;
>@@ -661,8 +645,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
> 
> 	rtl8723b_InitializeFirmwareVars(padapter);
> 
>-/* 	SIC_Init(padapter); */
>-
> 	if (pwrctrlpriv->reg_rfoff)
> 		pwrctrlpriv->rf_pwrstate = rf_off;
> 
>@@ -704,8 +686,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
> 	pHalData->RfRegChnlVal[1] =
> 		PHY_QueryRFReg(padapter, (enum rf_path)1, RF_CHNLBW, bRFRegOffsetMask);
> 
>-
>-	/* if (!pHalData->bMACFuncEnable) { */
> 	_InitQueueReservedPage(padapter);
> 	_InitTxBufferBoundary(padapter);
> 
>@@ -745,11 +725,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
> 	rtw_hal_set_chnl_bw(padapter, padapter->registrypriv.channel,
> 		CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE);
> 
>-	/*  Record original value for template. This is arough data, we can only use the data */
>-	/*  for power adjust. The value can not be adjustde according to different power!!! */
>-/* 	pHalData->OriginalCckTxPwrIdx = pHalData->CurrentCckTxPwrIdx; */
>-/* 	pHalData->OriginalOfdm24GTxPwrIdx = pHalData->CurrentOfdm24GTxPwrIdx; */
>-
> 	rtl8723b_InitAntenna_Selection(padapter);
> 
> 	/*  */
>@@ -791,8 +766,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
> 	/* ack for xmit mgmt frames. */
> 	rtw_write32(padapter, REG_FWHW_TXQ_CTRL, rtw_read32(padapter, REG_FWHW_TXQ_CTRL) | BIT(12));
> 
>-/* 	pHalData->PreRpwmVal = SdioLocalCmd52Read1Byte(padapter, SDIO_REG_HRPWM1) & 0x80; */
>-
> 	{
> 		pwrctrlpriv->rf_pwrstate = rf_on;
> 
>@@ -1080,8 +1053,6 @@ static void _ReadPROMContent(struct adapter *padapter)
> 	pEEPROM->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? true : false;
> 	pEEPROM->bautoload_fail_flag = (eeValue & EEPROM_EN) ? false : true;
> 
>-/* 	pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE; */
>-
> 	_ReadEfuseInfo8723BS(padapter);
> }
> 

Looking good to me, applies cleanly.
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>