From: "Michael Walle" <mwalle@kernel.org>
To: "Weimin Wu" <wuweimin@huaqin.corp-partner.google.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-mtd@lists.infradead.org>,
<pratyush@kernel.org>, <takahiro.kuwano@infineon.com>,
<tudor.ambarus@linaro.org>
Subject: Re: [PATCH] [v5] mtd: spi-nor: gigadevice: Add support for GD25LQ255E & GD25LQ256H
Date: Fri, 20 Nov 2026 14:08:05 +0100 [thread overview]
Message-ID: <DN028AALEL5P.BR73QEJF46H1@kernel.org> (raw)
In-Reply-To: <20260728064954.3474270-1-wuweimin@huaqin.corp-partner.google.com>
[-- Attachment #1: Type: text/plain, Size: 10755 bytes --]
Hi,
I'm going through the backlog of patches, excuse my very late reply.
On Tue Jul 28, 2026 at 8:49 AM CEST, Weimin Wu wrote:
> Add support for the GD25LQ255E & GD25LQ256H (JEDEC ID c8 60 19),
> a 256Mbit (32MB) SPI NOR flash chip which supports SFDP.
>
> GD25LQ256H shares the same JEDEC ID (c8 60 19) with GD25LQ255E.
> Since GD25LQ256H supports DTR (Double Transfer Rate) mode while
> GD25LQ255E does not, use the post_bfpt hook to detect this capability
> via SFDP and dynamically redirect the info pointer. This allows both
> chips to be supported correctly without breaking write protection on
> GD25LQ255E.
>
> Without this patch, The WP status cannot be obtained using flashrom:
> device:/ # flashrom --wp-status
> ...
> linux_mtd_wp_read_cfg:
> ioctl: Operation not supported on transport endpoint
> Failed to get WP status: failed to read the current WP configuration
>
> and with this patch:
> device:/ # flashrom --wp-status
> ...
> Protection range: start=0x00000000 length=0x00000000 (none)
> Protection mode: disabled
> SUCCESS
>
> Link: https://download.gigadevice.com/Datasheet/DS-00562-GD25LQ255E-Rev1.2.pdf
> Link: https://download.gigadevice.com/Datasheet/DS-01085-GD25LQ256H-Rev1.3.pdf
>
> Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
>
> ---
> Changes in v5:
> - Add a feature to distinguish between GD25LQ256H and GD25LQ255E by detecting whether DTR is supported.
> - Link to v4: https://patchwork.ozlabs.org/project/linux-mtd/patch/20260527032823.771616-1-wuweimin@huaqin.corp-partner.google.com/
> - Link to v3: https://patchwork.ozlabs.org/project/linux-mtd/patch/20260418084253.792395-1-wuweimin@huaqin.corp-partner.google.com/
> - Link to v2: https://patchwork.ozlabs.org/project/linux-mtd/patch/20260313133806.2390946-1-wuweimin@huaqin.corp-partner.google.com/
> - Link to v1: https://patchwork.ozlabs.org/project/linux-mtd/patch/20260213144133.1778932-1-wuweimin@huaqin.corp-partner.google.com/
>
> Refer to the following documents:
> https://docs.kernel.org/driver-api/mtd/spi-nor.html#minimum-testing-requirements
>
> For GD25LQ256H
> 1. Specify the controller that you used to test the flash and specify the frequency at which the flash was operated:
>
> This flash memory has been successfully tested at 100Mhz frequency on a Chromebook device running the Intel Patherlake platform, which is currently under development.
>
> 2. Dump the sysfs entries and print the md5/sha1/sha256 SFDP checksum:
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
> gd25lq256h
>
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
> c86019
>
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
> gigadevice
>
> root:/ # xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 53464450070102ff00070114300000ffc8000103900000ff84010102c000
> 00ffffffffffffffffffffffffffffffffffe520fbffffffff0f44eb086b
> 083b80bbfeffffffffff00ffffff42eb0c200f5210d800ffd4299dfe84d2
> 14c7ec6316337a757a7507b3d55c190614ff885018010000000000008800
> 00000000f6f5ffffffffffffffffffffffffffffffffffff002050169ff9
> 7764fc8bffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffff8e00fe215cdcff
>
> root:/ # sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 09f61fe623df200d86b4ab47c48e3a13718fadbb450fcd430b3cdc49a902b1f6 /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
>
> 3. Dump debugfs data:
> root:/ # cat /sys/kernel/debug/spi-nor/spi0.0/capabilities
> Supported read modes by the flash
> 1S-1S-1S
> opcode 0x13
> mode cycles 0
> dummy cycles 0
> 1S-1S-1S (fast read)
> opcode 0x0c
> mode cycles 0
> dummy cycles 8
> 1S-1S-2S
> opcode 0x3c
> mode cycles 0
> dummy cycles 8
> 1S-2S-2S
> opcode 0xbc
> mode cycles 4
> dummy cycles 0
> 1S-1S-4S
> opcode 0x6c
> mode cycles 0
> dummy cycles 8
> 1S-4S-4S
> opcode 0xec
> mode cycles 2
> dummy cycles 4
> 4S-4S-4S
> opcode 0xec
> mode cycles 2
> dummy cycles 2
>
> Supported page program modes by the flash
> 1S-1S-1S
> opcode 0x12
> 1S-1S-4S
> opcode 0x34
>
> root:/ # cat /sys/kernel/debug/spi-nor/spi0.0/params
> name (null)
> id c8 60 19 c8 60 19
> size 32.0 MiB
> write size 1
> page size 256
> address nbytes 4
> flags HAS_SR_TB | 4B_OPCODES | HAS_4BAIT | HAS_LOCK | HAS_16BIT_SR | NO_READ_CR | HAS_SR_TB_BIT6 | HAS_4BIT_BP | SOFT_RESET
>
> opcodes
> read 0x0c
> dummy cycles 8
> erase 0xdc
> program 0x12
> 8D extension repeat
>
> protocols
> read 1S-1S-1S
> write 1S-1S-1S
> register 1S-1S-1S
>
> erase commands
> 21 (4.00 KiB) [1]
> 5c (32.0 KiB) [2]
> dc (64.0 KiB) [3]
> c7 (32.0 MiB)
>
> sector map
> region (in hex) | erase mask | overlaid
> ------------------+------------+----------
> 00000000-01ffffff | [ 3] | no
>
> 4. Use mtd-utils and verify that erase, read and page program operations work fine:
> Because Chromebooks lack the necessary mtd-utils directives, the corresponding data cannot be provided.
>
> For GD25LQ255E
> 1. Specify the controller that you used to test the flash and specify the frequency at which the flash was operated:
>
> This flash memory has been successfully tested at 100Mhz frequency on a Chromebook device running the Intel Patherlake platform, which is currently under development.
>
> 2. Dump the sysfs entries and print the md5/sha1/sha256 SFDP checksum:
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
> gd25lq255e
>
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
> c86019
>
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
> gigadevice
>
> root:/ # xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 53464450070102ff00070114300000ffc8000103900000ff84010102c000
> 00ffffffffffffffffffffffffffffffffffe520fbffffffff0f44eb086b
> 083b80bbfeffffffffff00ffffff42eb0c200f5210d800ffd4299dfe84d2
> 14c7ec6316337a757a7507b3d55c190614ff885018010000000000008800
> 00000000f6f5ffffffffffffffffffffffffffffffffffff002050169ff9
> 7764fc8bffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffff8e00fe215cdcff
>
> root:/ # sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 09f61fe623df200d86b4ab47c48e3a13718fadbb450fcd430b3cdc49a902b1f6 /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
>
> 3. Dump debugfs data:
> root:/ # cat /sys/kernel/debug/spi-nor/spi0.0/capabilities
> Supported read modes by the flash
> 1S-1S-1S
> opcode 0x13
> mode cycles 0
> dummy cycles 0
> 1S-1S-1S (fast read)
> opcode 0x0c
> mode cycles 0
> dummy cycles 8
> 1S-1S-2S
> opcode 0x3c
> mode cycles 0
> dummy cycles 8
> 1S-2S-2S
> opcode 0xbc
> mode cycles 4
> dummy cycles 0
> 1S-1S-4S
> opcode 0x6c
> mode cycles 0
> dummy cycles 8
> 1S-4S-4S
> opcode 0xec
> mode cycles 2
> dummy cycles 4
> 4S-4S-4S
> opcode 0xec
> mode cycles 2
> dummy cycles 2
>
> Supported page program modes by the flash
> 1S-1S-1S
> opcode 0x12
> 1S-1S-4S
> opcode 0x34
>
> root:/ # cat /sys/kernel/debug/spi-nor/spi0.0/params
> name (null)
> id c8 60 19 c8 60 19
> size 32.0 MiB
> write size 1
> page size 256
> address nbytes 4
> flags HAS_SR_TB | 4B_OPCODES | HAS_4BAIT | HAS_LOCK | HAS_16BIT_SR | NO_READ_CR | HAS_SR_TB_BIT6 | HAS_4BIT_BP | SOFT_RESET
>
> opcodes
> read 0x0c
> dummy cycles 8
> erase 0xdc
> program 0x12
> 8D extension repeat
>
> protocols
> read 1S-1S-1S
> write 1S-1S-1S
> register 1S-1S-1S
>
> erase commands
> 21 (4.00 KiB) [1]
> 5c (32.0 KiB) [2]
> dc (64.0 KiB) [3]
> c7 (32.0 MiB)
>
> sector map
> region (in hex) | erase mask | overlaid
> ------------------+------------+----------
> 00000000-01ffffff | [ 3] | no
> root:/ # cat /sys/bus/spi/devices/spi0.0/
> driver/ mtd/ statistics/ uevent
> driver_override power/ subsystem/
> modalias spi-nor/ supplier:regulator:regulator.0/
> root:/ # cat /sys/bus/spi/devices/spi0.0/s
> spi-nor/ statistics/ subsystem/ supplier:regulator:regulator.0/
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/
> jedec_id manufacturer sfdp
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/
>
> 4. Use mtd-utils and verify that erase, read and page program operations work fine:
> Because Chromebooks lack the necessary mtd-utils directives, the corresponding data cannot be provided.
> ---
> ---
> ---
> drivers/mtd/spi-nor/gigadevice.c | 33 ++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
> index ef1edd0add70..9fc97feb2849 100644
> --- a/drivers/mtd/spi-nor/gigadevice.c
> +++ b/drivers/mtd/spi-nor/gigadevice.c
> @@ -33,6 +33,34 @@ static const struct spi_nor_fixups gd25q256_fixups = {
> .post_bfpt = gd25q256_post_bfpt,
> };
>
> +static const struct flash_info gd25lq256h_info = {
> + .name = "gd25lq256h",
> + .id = SNOR_ID(0xc8, 0x60, 0x19),
> + .flags = SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6,
> +};
> +
> +static int
> +gd25lq255e_post_bfpt(struct spi_nor *nor,
> + const struct sfdp_parameter_header *bfpt_header,
> + const struct sfdp_bfpt *bfpt)
> +{
> + /*
> + * GD25LQ255E and GD25LQ256H share the same JEDEC ID (c8 60 19).
> + * We can differentiate them by checking if the chip supports DTR
> + * (Double Transfer Rate) mode, which is only supported by GD25LQ256H.
> + *
> + * SFDP parsing sets the DTR hwcaps if supported.
> + */
> + if (bfpt->dwords[SFDP_DWORD(1)] & BFPT_DWORD1_DTR)
> + nor->info = &gd25lq256h_info;
We got a new .match which should help you here. You can add both
entries and add a .match. windbond.c should have enough examples you
can look at.
-michael
> +
> + return 0;
> +}
> +
> +static const struct spi_nor_fixups gd25lq255e_fixups = {
> + .post_bfpt = gd25lq255e_post_bfpt,
> +};
> +
> static const struct flash_info gigadevice_nor_parts[] = {
> {
> .id = SNOR_ID(0xc8, 0x40, 0x15),
> @@ -82,6 +110,11 @@ static const struct flash_info gigadevice_nor_parts[] = {
> .size = SZ_16M,
> .flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
> .no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
> + }, {
> + .id = SNOR_ID(0xc8, 0x60, 0x19),
> + .name = "gd25lq255e",
> + .flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
> + .fixups = &gd25lq255e_fixups,
> },
> };
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 297 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: "Michael Walle" <mwalle@kernel.org>
To: "Weimin Wu" <wuweimin@huaqin.corp-partner.google.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-mtd@lists.infradead.org>,
<pratyush@kernel.org>, <takahiro.kuwano@infineon.com>,
<tudor.ambarus@linaro.org>
Subject: Re: [PATCH] [v5] mtd: spi-nor: gigadevice: Add support for GD25LQ255E & GD25LQ256H
Date: Fri, 20 Nov 2026 14:08:05 +0100 [thread overview]
Message-ID: <DN028AALEL5P.BR73QEJF46H1@kernel.org> (raw)
In-Reply-To: <20260728064954.3474270-1-wuweimin@huaqin.corp-partner.google.com>
[-- Attachment #1.1: Type: text/plain, Size: 10755 bytes --]
Hi,
I'm going through the backlog of patches, excuse my very late reply.
On Tue Jul 28, 2026 at 8:49 AM CEST, Weimin Wu wrote:
> Add support for the GD25LQ255E & GD25LQ256H (JEDEC ID c8 60 19),
> a 256Mbit (32MB) SPI NOR flash chip which supports SFDP.
>
> GD25LQ256H shares the same JEDEC ID (c8 60 19) with GD25LQ255E.
> Since GD25LQ256H supports DTR (Double Transfer Rate) mode while
> GD25LQ255E does not, use the post_bfpt hook to detect this capability
> via SFDP and dynamically redirect the info pointer. This allows both
> chips to be supported correctly without breaking write protection on
> GD25LQ255E.
>
> Without this patch, The WP status cannot be obtained using flashrom:
> device:/ # flashrom --wp-status
> ...
> linux_mtd_wp_read_cfg:
> ioctl: Operation not supported on transport endpoint
> Failed to get WP status: failed to read the current WP configuration
>
> and with this patch:
> device:/ # flashrom --wp-status
> ...
> Protection range: start=0x00000000 length=0x00000000 (none)
> Protection mode: disabled
> SUCCESS
>
> Link: https://download.gigadevice.com/Datasheet/DS-00562-GD25LQ255E-Rev1.2.pdf
> Link: https://download.gigadevice.com/Datasheet/DS-01085-GD25LQ256H-Rev1.3.pdf
>
> Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
>
> ---
> Changes in v5:
> - Add a feature to distinguish between GD25LQ256H and GD25LQ255E by detecting whether DTR is supported.
> - Link to v4: https://patchwork.ozlabs.org/project/linux-mtd/patch/20260527032823.771616-1-wuweimin@huaqin.corp-partner.google.com/
> - Link to v3: https://patchwork.ozlabs.org/project/linux-mtd/patch/20260418084253.792395-1-wuweimin@huaqin.corp-partner.google.com/
> - Link to v2: https://patchwork.ozlabs.org/project/linux-mtd/patch/20260313133806.2390946-1-wuweimin@huaqin.corp-partner.google.com/
> - Link to v1: https://patchwork.ozlabs.org/project/linux-mtd/patch/20260213144133.1778932-1-wuweimin@huaqin.corp-partner.google.com/
>
> Refer to the following documents:
> https://docs.kernel.org/driver-api/mtd/spi-nor.html#minimum-testing-requirements
>
> For GD25LQ256H
> 1. Specify the controller that you used to test the flash and specify the frequency at which the flash was operated:
>
> This flash memory has been successfully tested at 100Mhz frequency on a Chromebook device running the Intel Patherlake platform, which is currently under development.
>
> 2. Dump the sysfs entries and print the md5/sha1/sha256 SFDP checksum:
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
> gd25lq256h
>
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
> c86019
>
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
> gigadevice
>
> root:/ # xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 53464450070102ff00070114300000ffc8000103900000ff84010102c000
> 00ffffffffffffffffffffffffffffffffffe520fbffffffff0f44eb086b
> 083b80bbfeffffffffff00ffffff42eb0c200f5210d800ffd4299dfe84d2
> 14c7ec6316337a757a7507b3d55c190614ff885018010000000000008800
> 00000000f6f5ffffffffffffffffffffffffffffffffffff002050169ff9
> 7764fc8bffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffff8e00fe215cdcff
>
> root:/ # sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 09f61fe623df200d86b4ab47c48e3a13718fadbb450fcd430b3cdc49a902b1f6 /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
>
> 3. Dump debugfs data:
> root:/ # cat /sys/kernel/debug/spi-nor/spi0.0/capabilities
> Supported read modes by the flash
> 1S-1S-1S
> opcode 0x13
> mode cycles 0
> dummy cycles 0
> 1S-1S-1S (fast read)
> opcode 0x0c
> mode cycles 0
> dummy cycles 8
> 1S-1S-2S
> opcode 0x3c
> mode cycles 0
> dummy cycles 8
> 1S-2S-2S
> opcode 0xbc
> mode cycles 4
> dummy cycles 0
> 1S-1S-4S
> opcode 0x6c
> mode cycles 0
> dummy cycles 8
> 1S-4S-4S
> opcode 0xec
> mode cycles 2
> dummy cycles 4
> 4S-4S-4S
> opcode 0xec
> mode cycles 2
> dummy cycles 2
>
> Supported page program modes by the flash
> 1S-1S-1S
> opcode 0x12
> 1S-1S-4S
> opcode 0x34
>
> root:/ # cat /sys/kernel/debug/spi-nor/spi0.0/params
> name (null)
> id c8 60 19 c8 60 19
> size 32.0 MiB
> write size 1
> page size 256
> address nbytes 4
> flags HAS_SR_TB | 4B_OPCODES | HAS_4BAIT | HAS_LOCK | HAS_16BIT_SR | NO_READ_CR | HAS_SR_TB_BIT6 | HAS_4BIT_BP | SOFT_RESET
>
> opcodes
> read 0x0c
> dummy cycles 8
> erase 0xdc
> program 0x12
> 8D extension repeat
>
> protocols
> read 1S-1S-1S
> write 1S-1S-1S
> register 1S-1S-1S
>
> erase commands
> 21 (4.00 KiB) [1]
> 5c (32.0 KiB) [2]
> dc (64.0 KiB) [3]
> c7 (32.0 MiB)
>
> sector map
> region (in hex) | erase mask | overlaid
> ------------------+------------+----------
> 00000000-01ffffff | [ 3] | no
>
> 4. Use mtd-utils and verify that erase, read and page program operations work fine:
> Because Chromebooks lack the necessary mtd-utils directives, the corresponding data cannot be provided.
>
> For GD25LQ255E
> 1. Specify the controller that you used to test the flash and specify the frequency at which the flash was operated:
>
> This flash memory has been successfully tested at 100Mhz frequency on a Chromebook device running the Intel Patherlake platform, which is currently under development.
>
> 2. Dump the sysfs entries and print the md5/sha1/sha256 SFDP checksum:
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
> gd25lq255e
>
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
> c86019
>
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
> gigadevice
>
> root:/ # xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 53464450070102ff00070114300000ffc8000103900000ff84010102c000
> 00ffffffffffffffffffffffffffffffffffe520fbffffffff0f44eb086b
> 083b80bbfeffffffffff00ffffff42eb0c200f5210d800ffd4299dfe84d2
> 14c7ec6316337a757a7507b3d55c190614ff885018010000000000008800
> 00000000f6f5ffffffffffffffffffffffffffffffffffff002050169ff9
> 7764fc8bffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffff8e00fe215cdcff
>
> root:/ # sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 09f61fe623df200d86b4ab47c48e3a13718fadbb450fcd430b3cdc49a902b1f6 /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
>
> 3. Dump debugfs data:
> root:/ # cat /sys/kernel/debug/spi-nor/spi0.0/capabilities
> Supported read modes by the flash
> 1S-1S-1S
> opcode 0x13
> mode cycles 0
> dummy cycles 0
> 1S-1S-1S (fast read)
> opcode 0x0c
> mode cycles 0
> dummy cycles 8
> 1S-1S-2S
> opcode 0x3c
> mode cycles 0
> dummy cycles 8
> 1S-2S-2S
> opcode 0xbc
> mode cycles 4
> dummy cycles 0
> 1S-1S-4S
> opcode 0x6c
> mode cycles 0
> dummy cycles 8
> 1S-4S-4S
> opcode 0xec
> mode cycles 2
> dummy cycles 4
> 4S-4S-4S
> opcode 0xec
> mode cycles 2
> dummy cycles 2
>
> Supported page program modes by the flash
> 1S-1S-1S
> opcode 0x12
> 1S-1S-4S
> opcode 0x34
>
> root:/ # cat /sys/kernel/debug/spi-nor/spi0.0/params
> name (null)
> id c8 60 19 c8 60 19
> size 32.0 MiB
> write size 1
> page size 256
> address nbytes 4
> flags HAS_SR_TB | 4B_OPCODES | HAS_4BAIT | HAS_LOCK | HAS_16BIT_SR | NO_READ_CR | HAS_SR_TB_BIT6 | HAS_4BIT_BP | SOFT_RESET
>
> opcodes
> read 0x0c
> dummy cycles 8
> erase 0xdc
> program 0x12
> 8D extension repeat
>
> protocols
> read 1S-1S-1S
> write 1S-1S-1S
> register 1S-1S-1S
>
> erase commands
> 21 (4.00 KiB) [1]
> 5c (32.0 KiB) [2]
> dc (64.0 KiB) [3]
> c7 (32.0 MiB)
>
> sector map
> region (in hex) | erase mask | overlaid
> ------------------+------------+----------
> 00000000-01ffffff | [ 3] | no
> root:/ # cat /sys/bus/spi/devices/spi0.0/
> driver/ mtd/ statistics/ uevent
> driver_override power/ subsystem/
> modalias spi-nor/ supplier:regulator:regulator.0/
> root:/ # cat /sys/bus/spi/devices/spi0.0/s
> spi-nor/ statistics/ subsystem/ supplier:regulator:regulator.0/
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/
> jedec_id manufacturer sfdp
> root:/ # cat /sys/bus/spi/devices/spi0.0/spi-nor/
>
> 4. Use mtd-utils and verify that erase, read and page program operations work fine:
> Because Chromebooks lack the necessary mtd-utils directives, the corresponding data cannot be provided.
> ---
> ---
> ---
> drivers/mtd/spi-nor/gigadevice.c | 33 ++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
> index ef1edd0add70..9fc97feb2849 100644
> --- a/drivers/mtd/spi-nor/gigadevice.c
> +++ b/drivers/mtd/spi-nor/gigadevice.c
> @@ -33,6 +33,34 @@ static const struct spi_nor_fixups gd25q256_fixups = {
> .post_bfpt = gd25q256_post_bfpt,
> };
>
> +static const struct flash_info gd25lq256h_info = {
> + .name = "gd25lq256h",
> + .id = SNOR_ID(0xc8, 0x60, 0x19),
> + .flags = SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6,
> +};
> +
> +static int
> +gd25lq255e_post_bfpt(struct spi_nor *nor,
> + const struct sfdp_parameter_header *bfpt_header,
> + const struct sfdp_bfpt *bfpt)
> +{
> + /*
> + * GD25LQ255E and GD25LQ256H share the same JEDEC ID (c8 60 19).
> + * We can differentiate them by checking if the chip supports DTR
> + * (Double Transfer Rate) mode, which is only supported by GD25LQ256H.
> + *
> + * SFDP parsing sets the DTR hwcaps if supported.
> + */
> + if (bfpt->dwords[SFDP_DWORD(1)] & BFPT_DWORD1_DTR)
> + nor->info = &gd25lq256h_info;
We got a new .match which should help you here. You can add both
entries and add a .match. windbond.c should have enough examples you
can look at.
-michael
> +
> + return 0;
> +}
> +
> +static const struct spi_nor_fixups gd25lq255e_fixups = {
> + .post_bfpt = gd25lq255e_post_bfpt,
> +};
> +
> static const struct flash_info gigadevice_nor_parts[] = {
> {
> .id = SNOR_ID(0xc8, 0x40, 0x15),
> @@ -82,6 +110,11 @@ static const struct flash_info gigadevice_nor_parts[] = {
> .size = SZ_16M,
> .flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
> .no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
> + }, {
> + .id = SNOR_ID(0xc8, 0x60, 0x19),
> + .name = "gd25lq255e",
> + .flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
> + .fixups = &gd25lq255e_fixups,
> },
> };
>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 297 bytes --]
[-- Attachment #2: Type: text/plain, Size: 144 bytes --]
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2026-11-20 13:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-18 8:42 [PATCH] [v3] mtd: spi-nor: gigadevice: Add support for GD25LQ255E Weimin Wu
2026-04-18 8:42 ` Weimin Wu
2026-04-20 7:57 ` Michael Walle
2026-04-20 7:57 ` Michael Walle
2026-04-20 9:42 ` Tudor Ambarus
2026-04-20 9:42 ` Tudor Ambarus
2026-04-20 9:51 ` Takahiro.Kuwano
2026-04-20 9:51 ` Takahiro.Kuwano
2026-04-20 10:44 ` Michael Walle
2026-04-20 10:44 ` Michael Walle
2026-05-26 13:30 ` Weimin Wu
2026-05-26 13:30 ` Weimin Wu
2026-05-27 9:39 ` Michael Walle
2026-05-27 9:39 ` Michael Walle
2026-05-27 3:28 ` [PATCH] [v4] mtd: spi-nor: gigadevice: Add support for GD25LQ256H Weimin Wu
2026-05-27 3:28 ` Weimin Wu
2026-05-27 9:43 ` Michael Walle
2026-05-27 9:43 ` Michael Walle
2026-07-28 6:49 ` [PATCH] [v5] mtd: spi-nor: gigadevice: Add support for GD25LQ255E & GD25LQ256H Weimin Wu
2026-07-28 6:49 ` Weimin Wu
2026-11-20 13:08 ` Michael Walle [this message]
2026-11-20 13:08 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DN028AALEL5P.BR73QEJF46H1@kernel.org \
--to=mwalle@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=pratyush@kernel.org \
--cc=takahiro.kuwano@infineon.com \
--cc=tudor.ambarus@linaro.org \
--cc=wuweimin@huaqin.corp-partner.google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.