From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Chen-Yu Tsai <wens@csie.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org,
linux-mediatek@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-sunxi@lists.linux.dev,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Samuel Holland <samuel@sholland.org>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH net-next v2 5/9] net: stmmac: meson8b: remove of_get_phy_mode()
Date: Wed, 12 Mar 2025 09:20:47 +0000 [thread overview]
Message-ID: <E1tsIGd-005uzr-0C@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Z9FQjQZb0IMaQJ9H@shell.armlinux.org.uk>
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
Set dwmac->phy_mode from plat_dat->phy_interface.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 9c2d62d133ad..a50782994b97 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -417,11 +417,7 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
return PTR_ERR(dwmac->regs);
dwmac->dev = &pdev->dev;
- ret = of_get_phy_mode(pdev->dev.of_node, &dwmac->phy_mode);
- if (ret) {
- dev_err(&pdev->dev, "missing phy-mode property\n");
- return ret;
- }
+ dwmac->phy_mode = plat_dat->phy_interface;
/* use 2ns as fallback since this value was previously hardcoded */
if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
--
2.30.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Chen-Yu Tsai <wens@csie.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org,
linux-mediatek@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-sunxi@lists.linux.dev,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Samuel Holland <samuel@sholland.org>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH net-next v2 5/9] net: stmmac: meson8b: remove of_get_phy_mode()
Date: Wed, 12 Mar 2025 09:20:47 +0000 [thread overview]
Message-ID: <E1tsIGd-005uzr-0C@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Z9FQjQZb0IMaQJ9H@shell.armlinux.org.uk>
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
Set dwmac->phy_mode from plat_dat->phy_interface.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 9c2d62d133ad..a50782994b97 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -417,11 +417,7 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
return PTR_ERR(dwmac->regs);
dwmac->dev = &pdev->dev;
- ret = of_get_phy_mode(pdev->dev.of_node, &dwmac->phy_mode);
- if (ret) {
- dev_err(&pdev->dev, "missing phy-mode property\n");
- return ret;
- }
+ dwmac->phy_mode = plat_dat->phy_interface;
/* use 2ns as fallback since this value was previously hardcoded */
if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
--
2.30.2
next prev parent reply other threads:[~2025-03-12 9:26 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-12 9:14 [PATCH net-next v2 0/9] net: stmmac: remove unnecessary of_get_phy_mode() calls Russell King (Oracle)
2025-03-12 9:14 ` Russell King (Oracle)
2025-03-12 9:20 ` [PATCH net-next v2 1/9] net: stmmac: qcom-ethqos: remove of_get_phy_mode() Russell King (Oracle)
2025-03-12 9:20 ` Russell King (Oracle)
2025-03-12 9:20 ` [PATCH net-next v2 2/9] net: stmmac: mediatek: " Russell King (Oracle)
2025-03-12 9:20 ` Russell King (Oracle)
2025-03-12 9:20 ` [PATCH net-next v2 3/9] net: stmmac: anarion: " Russell King (Oracle)
2025-03-12 9:20 ` Russell King (Oracle)
2025-03-12 9:20 ` [PATCH net-next v2 4/9] net: stmmac: ipq806x: " Russell King (Oracle)
2025-03-12 9:20 ` Russell King (Oracle)
2025-03-12 9:20 ` Russell King (Oracle) [this message]
2025-03-12 9:20 ` [PATCH net-next v2 5/9] net: stmmac: meson8b: " Russell King (Oracle)
2025-03-12 9:20 ` [PATCH net-next v2 6/9] net: stmmac: rk: " Russell King (Oracle)
2025-03-12 9:20 ` Russell King (Oracle)
2025-03-12 9:20 ` [PATCH net-next v2 7/9] net: stmmac: sti: " Russell King (Oracle)
2025-03-12 9:20 ` Russell King (Oracle)
2025-03-12 9:21 ` [PATCH net-next v2 8/9] net: stmmac: sun8i: " Russell King (Oracle)
2025-03-12 9:21 ` Russell King (Oracle)
2025-03-12 9:21 ` [PATCH net-next v2 9/9] net: stmmac: sunxi: " Russell King (Oracle)
2025-03-12 9:21 ` Russell King (Oracle)
2025-03-13 22:48 ` [PATCH net-next v2 0/9] net: stmmac: remove unnecessary of_get_phy_mode() calls Jacob Keller
2025-03-13 22:48 ` Jacob Keller
2025-03-18 15:00 ` patchwork-bot+netdevbpf
2025-03-18 15:00 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1tsIGd-005uzr-0C@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=jbrunet@baylibre.com \
--cc=jernej.skrabec@gmail.com \
--cc=khilman@baylibre.com \
--cc=kuba@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=martin.blumenstingl@googlemail.com \
--cc=matthias.bgg@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=neil.armstrong@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=samuel@sholland.org \
--cc=vkoul@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.