All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Chen-Yu Tsai <wens@csie.org>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org,
	linux-mediatek@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-sunxi@lists.linux.dev,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
	Samuel Holland <samuel@sholland.org>,
	Vinod Koul <vkoul@kernel.org>
Subject: [PATCH net-next v2 8/9] net: stmmac: sun8i: remove of_get_phy_mode()
Date: Wed, 12 Mar 2025 09:21:02 +0000	[thread overview]
Message-ID: <E1tsIGs-005v09-CD@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Z9FQjQZb0IMaQJ9H@shell.armlinux.org.uk>

devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.

sun8i was using of_get_phy_mode() to set plat_dat->mac_interface, which
defaults to plat_dat->phy_interface when the mac-mode DT property is
not present. As nothing in arch/*/boot/dts sets the mac-mode property,
it is highly likely that these two will be identical, and thus there
is no need for this glue driver to set plat_dat->mac_interface.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 4b7b2582a120..85723a78793a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -1155,11 +1155,10 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 	struct stmmac_resources stmmac_res;
 	struct sunxi_priv_data *gmac;
 	struct device *dev = &pdev->dev;
-	phy_interface_t interface;
-	int ret;
 	struct stmmac_priv *priv;
 	struct net_device *ndev;
 	struct regmap *regmap;
+	int ret;
 
 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
 	if (ret)
@@ -1219,10 +1218,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = of_get_phy_mode(dev->of_node, &interface);
-	if (ret)
-		return -EINVAL;
-
 	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
 	if (IS_ERR(plat_dat))
 		return PTR_ERR(plat_dat);
@@ -1230,7 +1225,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 	/* platform data specifying hardware features and callbacks.
 	 * hardware features were copied from Allwinner drivers.
 	 */
-	plat_dat->mac_interface = interface;
 	plat_dat->rx_coe = STMMAC_RX_COE_TYPE2;
 	plat_dat->tx_coe = 1;
 	plat_dat->flags |= STMMAC_FLAG_HAS_SUN8I;
-- 
2.30.2


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Chen-Yu Tsai <wens@csie.org>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org,
	linux-mediatek@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-sunxi@lists.linux.dev,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
	Samuel Holland <samuel@sholland.org>,
	Vinod Koul <vkoul@kernel.org>
Subject: [PATCH net-next v2 8/9] net: stmmac: sun8i: remove of_get_phy_mode()
Date: Wed, 12 Mar 2025 09:21:02 +0000	[thread overview]
Message-ID: <E1tsIGs-005v09-CD@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Z9FQjQZb0IMaQJ9H@shell.armlinux.org.uk>

devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.

sun8i was using of_get_phy_mode() to set plat_dat->mac_interface, which
defaults to plat_dat->phy_interface when the mac-mode DT property is
not present. As nothing in arch/*/boot/dts sets the mac-mode property,
it is highly likely that these two will be identical, and thus there
is no need for this glue driver to set plat_dat->mac_interface.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 4b7b2582a120..85723a78793a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -1155,11 +1155,10 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 	struct stmmac_resources stmmac_res;
 	struct sunxi_priv_data *gmac;
 	struct device *dev = &pdev->dev;
-	phy_interface_t interface;
-	int ret;
 	struct stmmac_priv *priv;
 	struct net_device *ndev;
 	struct regmap *regmap;
+	int ret;
 
 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
 	if (ret)
@@ -1219,10 +1218,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = of_get_phy_mode(dev->of_node, &interface);
-	if (ret)
-		return -EINVAL;
-
 	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
 	if (IS_ERR(plat_dat))
 		return PTR_ERR(plat_dat);
@@ -1230,7 +1225,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 	/* platform data specifying hardware features and callbacks.
 	 * hardware features were copied from Allwinner drivers.
 	 */
-	plat_dat->mac_interface = interface;
 	plat_dat->rx_coe = STMMAC_RX_COE_TYPE2;
 	plat_dat->tx_coe = 1;
 	plat_dat->flags |= STMMAC_FLAG_HAS_SUN8I;
-- 
2.30.2



  parent reply	other threads:[~2025-03-12  9:31 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-12  9:14 [PATCH net-next v2 0/9] net: stmmac: remove unnecessary of_get_phy_mode() calls Russell King (Oracle)
2025-03-12  9:14 ` Russell King (Oracle)
2025-03-12  9:20 ` [PATCH net-next v2 1/9] net: stmmac: qcom-ethqos: remove of_get_phy_mode() Russell King (Oracle)
2025-03-12  9:20   ` Russell King (Oracle)
2025-03-12  9:20 ` [PATCH net-next v2 2/9] net: stmmac: mediatek: " Russell King (Oracle)
2025-03-12  9:20   ` Russell King (Oracle)
2025-03-12  9:20 ` [PATCH net-next v2 3/9] net: stmmac: anarion: " Russell King (Oracle)
2025-03-12  9:20   ` Russell King (Oracle)
2025-03-12  9:20 ` [PATCH net-next v2 4/9] net: stmmac: ipq806x: " Russell King (Oracle)
2025-03-12  9:20   ` Russell King (Oracle)
2025-03-12  9:20 ` [PATCH net-next v2 5/9] net: stmmac: meson8b: " Russell King (Oracle)
2025-03-12  9:20   ` Russell King (Oracle)
2025-03-12  9:20 ` [PATCH net-next v2 6/9] net: stmmac: rk: " Russell King (Oracle)
2025-03-12  9:20   ` Russell King (Oracle)
2025-03-12  9:20 ` [PATCH net-next v2 7/9] net: stmmac: sti: " Russell King (Oracle)
2025-03-12  9:20   ` Russell King (Oracle)
2025-03-12  9:21 ` Russell King (Oracle) [this message]
2025-03-12  9:21   ` [PATCH net-next v2 8/9] net: stmmac: sun8i: " Russell King (Oracle)
2025-03-12  9:21 ` [PATCH net-next v2 9/9] net: stmmac: sunxi: " Russell King (Oracle)
2025-03-12  9:21   ` Russell King (Oracle)
2025-03-13 22:48 ` [PATCH net-next v2 0/9] net: stmmac: remove unnecessary of_get_phy_mode() calls Jacob Keller
2025-03-13 22:48   ` Jacob Keller
2025-03-18 15:00 ` patchwork-bot+netdevbpf
2025-03-18 15:00   ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1tsIGs-005v09-CD@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=jbrunet@baylibre.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=khilman@baylibre.com \
    --cc=kuba@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=matthias.bgg@gmail.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=samuel@sholland.org \
    --cc=vkoul@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.