From: Jiri Pirko <jiri@resnulli.us>
To: Vadim Fedorenko <vfedorenko@novek.ru>
Cc: Jakub Kicinski <kuba@kernel.org>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, Vadim Fedorenko <vadfed@fb.com>
Subject: Re: [RFC PATCH v3 4/6] dpll: get source/output name
Date: Mon, 10 Oct 2022 11:45:55 +0200 [thread overview]
Message-ID: <Y0Pp019euDMHOjJu@nanopsycho> (raw)
In-Reply-To: <20221010011804.23716-5-vfedorenko@novek.ru>
Mon, Oct 10, 2022 at 03:18:02AM CEST, vfedorenko@novek.ru wrote:
>From: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
>
>Dump names of sources and outputs in response to DPLL_CMD_DEVICE_GET dump
>request.
>
>Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
>---
> drivers/dpll/dpll_netlink.c | 24 ++++++++++++++++++++++++
> include/linux/dpll.h | 2 ++
> include/uapi/linux/dpll.h | 2 ++
> 3 files changed, 28 insertions(+)
>
>diff --git a/drivers/dpll/dpll_netlink.c b/drivers/dpll/dpll_netlink.c
>index a5779871537a..e3604c10b59e 100644
>--- a/drivers/dpll/dpll_netlink.c
>+++ b/drivers/dpll/dpll_netlink.c
>@@ -31,12 +31,16 @@ static const struct nla_policy dpll_genl_set_source_policy[] = {
> [DPLLA_DEVICE_ID] = { .type = NLA_U32 },
> [DPLLA_SOURCE_ID] = { .type = NLA_U32 },
> [DPLLA_SOURCE_TYPE] = { .type = NLA_U32 },
>+ [DPLLA_SOURCE_NAME] = { .type = NLA_STRING,
>+ .len = DPLL_NAME_LENGTH },
> };
>
> static const struct nla_policy dpll_genl_set_output_policy[] = {
> [DPLLA_DEVICE_ID] = { .type = NLA_U32 },
> [DPLLA_OUTPUT_ID] = { .type = NLA_U32 },
> [DPLLA_OUTPUT_TYPE] = { .type = NLA_U32 },
>+ [DPLLA_OUTPUT_NAME] = { .type = NLA_STRING,
>+ .len = DPLL_NAME_LENGTH },
> };
>
> static const struct nla_policy dpll_genl_set_src_select_mode_policy[] = {
>@@ -100,6 +104,7 @@ static int __dpll_cmd_dump_sources(struct dpll_device *dpll,
> {
> int i, ret = 0, type, prio;
> struct nlattr *src_attr;
>+ const char *name;
>
> for (i = 0; i < dpll->sources_count; i++) {
> src_attr = nla_nest_start(msg, DPLLA_SOURCE);
>@@ -132,6 +137,15 @@ static int __dpll_cmd_dump_sources(struct dpll_device *dpll,
> break;
> }
> }
>+ if (dpll->ops->get_source_name) {
>+ name = dpll->ops->get_source_name(dpll, i);
>+ if (name && nla_put_string(msg, DPLLA_SOURCE_NAME,
>+ name)) {
>+ nla_nest_cancel(msg, src_attr);
>+ ret = -EMSGSIZE;
>+ break;
>+ }
>+ }
> nla_nest_end(msg, src_attr);
> }
>
>@@ -143,6 +157,7 @@ static int __dpll_cmd_dump_outputs(struct dpll_device *dpll,
> {
> struct nlattr *out_attr;
> int i, ret = 0, type;
>+ const char *name;
>
> for (i = 0; i < dpll->outputs_count; i++) {
> out_attr = nla_nest_start(msg, DPLLA_OUTPUT);
>@@ -167,6 +182,15 @@ static int __dpll_cmd_dump_outputs(struct dpll_device *dpll,
> }
> ret = 0;
> }
>+ if (dpll->ops->get_output_name) {
>+ name = dpll->ops->get_output_name(dpll, i);
>+ if (name && nla_put_string(msg, DPLLA_OUTPUT_NAME,
>+ name)) {
>+ nla_nest_cancel(msg, out_attr);
>+ ret = -EMSGSIZE;
>+ break;
>+ }
>+ }
> nla_nest_end(msg, out_attr);
> }
>
>diff --git a/include/linux/dpll.h b/include/linux/dpll.h
>index 3fe957a06b90..2f4964dc28f0 100644
>--- a/include/linux/dpll.h
>+++ b/include/linux/dpll.h
>@@ -23,6 +23,8 @@ struct dpll_device_ops {
> int (*set_output_type)(struct dpll_device *dpll, int id, int val);
> int (*set_source_select_mode)(struct dpll_device *dpll, int mode);
> int (*set_source_prio)(struct dpll_device *dpll, int id, int prio);
>+ const char *(*get_source_name)(struct dpll_device *dpll, int id);
>+ const char *(*get_output_name)(struct dpll_device *dpll, int id);
Hmm, why you exactly need the name for?
> };
>
> struct dpll_device *dpll_device_alloc(struct dpll_device_ops *ops, const char *name,
>diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
>index f6b674e5cf01..8782d3425aae 100644
>--- a/include/uapi/linux/dpll.h
>+++ b/include/uapi/linux/dpll.h
>@@ -26,11 +26,13 @@ enum dpll_genl_attr {
> DPLLA_SOURCE,
> DPLLA_SOURCE_ID,
> DPLLA_SOURCE_TYPE,
>+ DPLLA_SOURCE_NAME,
> DPLLA_SOURCE_SUPPORTED,
> DPLLA_SOURCE_PRIO,
> DPLLA_OUTPUT,
> DPLLA_OUTPUT_ID,
> DPLLA_OUTPUT_TYPE,
>+ DPLLA_OUTPUT_NAME,
> DPLLA_OUTPUT_SUPPORTED,
> DPLLA_STATUS,
> DPLLA_TEMP,
>--
>2.27.0
>
WARNING: multiple messages have this Message-ID (diff)
From: Jiri Pirko <jiri@resnulli.us>
To: Vadim Fedorenko <vfedorenko@novek.ru>
Cc: Jakub Kicinski <kuba@kernel.org>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, Vadim Fedorenko <vadfed@fb.com>
Subject: Re: [RFC PATCH v3 4/6] dpll: get source/output name
Date: Mon, 10 Oct 2022 11:45:55 +0200 [thread overview]
Message-ID: <Y0Pp019euDMHOjJu@nanopsycho> (raw)
In-Reply-To: <20221010011804.23716-5-vfedorenko@novek.ru>
Mon, Oct 10, 2022 at 03:18:02AM CEST, vfedorenko@novek.ru wrote:
>From: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
>
>Dump names of sources and outputs in response to DPLL_CMD_DEVICE_GET dump
>request.
>
>Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
>---
> drivers/dpll/dpll_netlink.c | 24 ++++++++++++++++++++++++
> include/linux/dpll.h | 2 ++
> include/uapi/linux/dpll.h | 2 ++
> 3 files changed, 28 insertions(+)
>
>diff --git a/drivers/dpll/dpll_netlink.c b/drivers/dpll/dpll_netlink.c
>index a5779871537a..e3604c10b59e 100644
>--- a/drivers/dpll/dpll_netlink.c
>+++ b/drivers/dpll/dpll_netlink.c
>@@ -31,12 +31,16 @@ static const struct nla_policy dpll_genl_set_source_policy[] = {
> [DPLLA_DEVICE_ID] = { .type = NLA_U32 },
> [DPLLA_SOURCE_ID] = { .type = NLA_U32 },
> [DPLLA_SOURCE_TYPE] = { .type = NLA_U32 },
>+ [DPLLA_SOURCE_NAME] = { .type = NLA_STRING,
>+ .len = DPLL_NAME_LENGTH },
> };
>
> static const struct nla_policy dpll_genl_set_output_policy[] = {
> [DPLLA_DEVICE_ID] = { .type = NLA_U32 },
> [DPLLA_OUTPUT_ID] = { .type = NLA_U32 },
> [DPLLA_OUTPUT_TYPE] = { .type = NLA_U32 },
>+ [DPLLA_OUTPUT_NAME] = { .type = NLA_STRING,
>+ .len = DPLL_NAME_LENGTH },
> };
>
> static const struct nla_policy dpll_genl_set_src_select_mode_policy[] = {
>@@ -100,6 +104,7 @@ static int __dpll_cmd_dump_sources(struct dpll_device *dpll,
> {
> int i, ret = 0, type, prio;
> struct nlattr *src_attr;
>+ const char *name;
>
> for (i = 0; i < dpll->sources_count; i++) {
> src_attr = nla_nest_start(msg, DPLLA_SOURCE);
>@@ -132,6 +137,15 @@ static int __dpll_cmd_dump_sources(struct dpll_device *dpll,
> break;
> }
> }
>+ if (dpll->ops->get_source_name) {
>+ name = dpll->ops->get_source_name(dpll, i);
>+ if (name && nla_put_string(msg, DPLLA_SOURCE_NAME,
>+ name)) {
>+ nla_nest_cancel(msg, src_attr);
>+ ret = -EMSGSIZE;
>+ break;
>+ }
>+ }
> nla_nest_end(msg, src_attr);
> }
>
>@@ -143,6 +157,7 @@ static int __dpll_cmd_dump_outputs(struct dpll_device *dpll,
> {
> struct nlattr *out_attr;
> int i, ret = 0, type;
>+ const char *name;
>
> for (i = 0; i < dpll->outputs_count; i++) {
> out_attr = nla_nest_start(msg, DPLLA_OUTPUT);
>@@ -167,6 +182,15 @@ static int __dpll_cmd_dump_outputs(struct dpll_device *dpll,
> }
> ret = 0;
> }
>+ if (dpll->ops->get_output_name) {
>+ name = dpll->ops->get_output_name(dpll, i);
>+ if (name && nla_put_string(msg, DPLLA_OUTPUT_NAME,
>+ name)) {
>+ nla_nest_cancel(msg, out_attr);
>+ ret = -EMSGSIZE;
>+ break;
>+ }
>+ }
> nla_nest_end(msg, out_attr);
> }
>
>diff --git a/include/linux/dpll.h b/include/linux/dpll.h
>index 3fe957a06b90..2f4964dc28f0 100644
>--- a/include/linux/dpll.h
>+++ b/include/linux/dpll.h
>@@ -23,6 +23,8 @@ struct dpll_device_ops {
> int (*set_output_type)(struct dpll_device *dpll, int id, int val);
> int (*set_source_select_mode)(struct dpll_device *dpll, int mode);
> int (*set_source_prio)(struct dpll_device *dpll, int id, int prio);
>+ const char *(*get_source_name)(struct dpll_device *dpll, int id);
>+ const char *(*get_output_name)(struct dpll_device *dpll, int id);
Hmm, why you exactly need the name for?
> };
>
> struct dpll_device *dpll_device_alloc(struct dpll_device_ops *ops, const char *name,
>diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
>index f6b674e5cf01..8782d3425aae 100644
>--- a/include/uapi/linux/dpll.h
>+++ b/include/uapi/linux/dpll.h
>@@ -26,11 +26,13 @@ enum dpll_genl_attr {
> DPLLA_SOURCE,
> DPLLA_SOURCE_ID,
> DPLLA_SOURCE_TYPE,
>+ DPLLA_SOURCE_NAME,
> DPLLA_SOURCE_SUPPORTED,
> DPLLA_SOURCE_PRIO,
> DPLLA_OUTPUT,
> DPLLA_OUTPUT_ID,
> DPLLA_OUTPUT_TYPE,
>+ DPLLA_OUTPUT_NAME,
> DPLLA_OUTPUT_SUPPORTED,
> DPLLA_STATUS,
> DPLLA_TEMP,
>--
>2.27.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-10-10 9:46 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-10 1:17 [RFC PATCH v3 0/5] Create common DPLL/clock configuration API Vadim Fedorenko
2022-10-10 1:17 ` Vadim Fedorenko
2022-10-10 1:17 ` [RFC PATCH v3 1/6] dpll: Add DPLL framework base functions Vadim Fedorenko
2022-10-10 1:17 ` Vadim Fedorenko
2022-10-10 9:18 ` Jiri Pirko
2022-10-10 9:18 ` Jiri Pirko
2022-10-10 19:54 ` Vadim Fedorenko
2022-10-10 19:54 ` Vadim Fedorenko
2022-10-11 8:32 ` Jiri Pirko
2022-10-11 8:32 ` Jiri Pirko
2022-10-11 8:47 ` Jiri Pirko
2022-10-11 8:47 ` Jiri Pirko
2022-10-11 21:31 ` Vadim Fedorenko
2022-10-11 21:31 ` Vadim Fedorenko
2022-10-12 6:44 ` Jiri Pirko
2022-10-12 6:44 ` Jiri Pirko
2022-10-12 20:12 ` Vadim Fedorenko
2022-10-12 20:12 ` Vadim Fedorenko
2022-10-13 6:55 ` Jiri Pirko
2022-10-13 6:55 ` Jiri Pirko
2022-10-13 15:17 ` Jakub Kicinski
2022-10-13 15:17 ` Jakub Kicinski
2022-10-14 9:52 ` Jiri Pirko
2022-10-14 9:52 ` Jiri Pirko
2022-10-11 21:23 ` Vadim Fedorenko
2022-10-11 21:23 ` Vadim Fedorenko
2022-10-12 10:44 ` Jiri Pirko
2022-10-12 10:44 ` Jiri Pirko
2022-10-12 10:47 ` Jiri Pirko
2022-10-12 10:47 ` Jiri Pirko
2022-10-12 20:15 ` Vadim Fedorenko
2022-10-12 20:15 ` Vadim Fedorenko
2022-10-13 6:56 ` Jiri Pirko
2022-10-13 6:56 ` Jiri Pirko
2022-10-12 16:51 ` Jiri Pirko
2022-10-12 16:51 ` Jiri Pirko
2022-10-12 20:17 ` Vadim Fedorenko
2022-10-12 20:17 ` Vadim Fedorenko
2022-10-10 1:18 ` [RFC PATCH v3 2/6] dpll: add netlink events Vadim Fedorenko
2022-10-10 1:18 ` Vadim Fedorenko
2022-10-10 1:18 ` [RFC PATCH v3 3/6] dpll: add support for source selection modes Vadim Fedorenko
2022-10-10 1:18 ` Vadim Fedorenko
2022-10-10 14:13 ` Jiri Pirko
2022-10-10 14:13 ` Jiri Pirko
2022-10-10 20:03 ` Vadim Fedorenko
2022-10-10 20:03 ` Vadim Fedorenko
2022-10-10 1:18 ` [RFC PATCH v3 4/6] dpll: get source/output name Vadim Fedorenko
2022-10-10 1:18 ` Vadim Fedorenko
2022-10-10 9:45 ` Jiri Pirko [this message]
2022-10-10 9:45 ` Jiri Pirko
2022-10-10 19:55 ` Vadim Fedorenko
2022-10-10 19:55 ` Vadim Fedorenko
2022-10-11 7:28 ` Jiri Pirko
2022-10-11 7:28 ` Jiri Pirko
2022-10-10 1:18 ` [RFC PATCH v3 5/6] dpll: documentation on DPLL subsystem interface Vadim Fedorenko
2022-10-10 1:18 ` Vadim Fedorenko
2022-10-10 1:18 ` [RFC PATCH v3 6/6] ptp_ocp: implement DPLL ops Vadim Fedorenko
2022-10-10 1:18 ` Vadim Fedorenko
2022-10-10 15:42 ` Jiri Pirko
2022-10-10 15:42 ` Jiri Pirko
2022-10-10 20:14 ` Vadim Fedorenko
2022-10-10 20:14 ` Vadim Fedorenko
2022-10-11 7:30 ` Jiri Pirko
2022-10-11 7:30 ` Jiri Pirko
2022-10-11 0:30 ` kernel test robot
2022-10-12 15:14 ` Jiri Pirko
2022-10-12 15:14 ` Jiri Pirko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y0Pp019euDMHOjJu@nanopsycho \
--to=jiri@resnulli.us \
--cc=arkadiusz.kubalewski@intel.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vadfed@fb.com \
--cc=vfedorenko@novek.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.