From: Sam Ravnborg <sam@ravnborg.org>
To: Javier Martinez Canillas <javierm@redhat.com>
Cc: "Ondrej Jirman" <megous@megous.com>,
"Purism Kernel Team" <kernel@puri.sm>,
"Guido Günther" <agx@sigxcpu.org>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
"Thierry Reding" <thierry.reding@gmail.com>
Subject: Re: [PATCH 03/14] drm/panel-sitronix-st7703: Drop custom DSI write macros
Date: Mon, 2 Jan 2023 19:42:07 +0100 [thread overview]
Message-ID: <Y7Mlf5a9jp42w73t@ravnborg.org> (raw)
In-Reply-To: <20221228014757.3170486-4-javierm@redhat.com>
Hi Javier,
On Wed, Dec 28, 2022 at 02:47:46AM +0100, Javier Martinez Canillas wrote:
> There are macros for these already in the <drm/drm_mipi_dsi.h> header, use
> that instead and delete the custom DSI write macros defined in the driver.
>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> ---
>
> drivers/gpu/drm/panel/panel-sitronix-st7703.c | 83 ++++++++-----------
> 1 file changed, 33 insertions(+), 50 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> index 86a472b01360..3e6655c2727e 100644
> --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> @@ -73,14 +73,6 @@ static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
> return container_of(panel, struct st7703, panel);
> }
>
> -#define dsi_generic_write_seq(dsi, seq...) do { \
> - static const u8 d[] = { seq }; \
> - int ret; \
> - ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \
> - if (ret < 0) \
> - return ret; \
> - } while (0)
> -
> static int jh057n_init_sequence(struct st7703 *ctx)
> {
> struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> @@ -90,27 +82,27 @@ static int jh057n_init_sequence(struct st7703 *ctx)
> * resemble the ST7703 but the number of parameters often don't match
> * so it's likely a clone.
> */
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
> 0xF1, 0x12, 0x83);
Fix indent here, and in similar places below.
With that fixed:
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
> 0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
> 0x00, 0x00);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
> 0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
> 0x00);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
> 0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
> 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
> msleep(20);
>
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
> - dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
> 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
> 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
> 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
> @@ -119,7 +111,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
> 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
> 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
> 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
> 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
> @@ -128,7 +120,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
> 0xA5, 0x00, 0x00, 0x00, 0x00);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
> 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
> 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
> 0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
> @@ -162,15 +154,6 @@ static const struct st7703_panel_desc jh057n00900_panel_desc = {
> .init_sequence = jh057n_init_sequence,
> };
>
> -#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
> - static const u8 d[] = { seq }; \
> - int ret; \
> - ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
> - if (ret < 0) \
> - return ret; \
> - } while (0)
> -
> -
> static int xbd599_init_sequence(struct st7703 *ctx)
> {
> struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> @@ -180,9 +163,9 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> */
>
> /* Magic sequence to unlock user commands below. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
>
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
> 0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */
> 0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */
> 0x05, /* IHSRX = x6 (Low High Speed driving ability) */
> @@ -194,14 +177,14 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02,
> 0x4F, 0x11, 0x00, 0x00, 0x37);
>
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
> 0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */
> 0x22, /* DT = 15ms XDK_ECP = x2 */
> 0x20, /* PFM_DC_DIV = /1 */
> 0x03 /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */);
>
> /* RGB I/F porch timing */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
> 0x10, /* VBP_RGB_GEN */
> 0x10, /* VFP_RGB_GEN */
> 0x05, /* DE_BP_RGB_GEN */
> @@ -212,7 +195,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0x00, 0x00);
>
> /* Source driving settings. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
> 0x73, /* N_POPON */
> 0x73, /* N_NOPON */
> 0x50, /* I_POPON */
> @@ -224,19 +207,19 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0x00 /* Undocumented */);
>
> /* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
>
> /*
> * SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan)
> * REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR)
> */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
>
> /* Zig-Zag Type C column inversion. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
>
> /* Set display resolution. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
> 0xF0, /* NL = 240 */
> 0x12, /* RES_V_LSB = 0, BLK_CON = VSSD,
> * RESO_SEL = 720RGB
> @@ -246,7 +229,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> * ISC = 0 frames
> */);
>
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
> 0x00, /* PNOEQ */
> 0x00, /* NNOEQ */
> 0x0B, /* PEQGND */
> @@ -267,9 +250,9 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> */);
>
> /* Undocumented command. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
>
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
> 0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
> 0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */
> 0x32, /* VRP */
> @@ -287,20 +270,20 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0x77 /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */);
>
> /* Reference voltage. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
> 0x07, /* VREF_SEL = 4.2V */
> 0x07 /* NVREF_SEL = 4.2V */);
> msleep(20);
>
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
> 0x2C, /* VCOMDC_F = -0.67V */
> 0x2C /* VCOMDC_B = -0.67V */);
>
> /* Undocumented command. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
>
> /* This command is to set forward GIP timing. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
> 0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
> 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
> 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
> @@ -311,7 +294,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
>
> /* This command is to set backward GIP timing. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
> 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
> 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
> @@ -322,7 +305,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0xA5, 0x00, 0x00, 0x00, 0x00);
>
> /* Adjust the gamma characteristics of the panel. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
> 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
> 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
> 0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
> @@ -499,7 +482,7 @@ static int allpixelson_set(void *data, u64 val)
> struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>
> dev_dbg(ctx->dev, "Setting all pixels on\n");
> - dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
> msleep(val * 1000);
> /* Reset the panel to get video back */
> drm_panel_disable(&ctx->panel);
> --
> 2.38.1
WARNING: multiple messages have this Message-ID (diff)
From: Sam Ravnborg <sam@ravnborg.org>
To: Javier Martinez Canillas <javierm@redhat.com>
Cc: linux-kernel@vger.kernel.org, "Ondrej Jirman" <megous@megous.com>,
"Purism Kernel Team" <kernel@puri.sm>,
"Guido Günther" <agx@sigxcpu.org>,
dri-devel@lists.freedesktop.org,
"Thierry Reding" <thierry.reding@gmail.com>
Subject: Re: [PATCH 03/14] drm/panel-sitronix-st7703: Drop custom DSI write macros
Date: Mon, 2 Jan 2023 19:42:07 +0100 [thread overview]
Message-ID: <Y7Mlf5a9jp42w73t@ravnborg.org> (raw)
In-Reply-To: <20221228014757.3170486-4-javierm@redhat.com>
Hi Javier,
On Wed, Dec 28, 2022 at 02:47:46AM +0100, Javier Martinez Canillas wrote:
> There are macros for these already in the <drm/drm_mipi_dsi.h> header, use
> that instead and delete the custom DSI write macros defined in the driver.
>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> ---
>
> drivers/gpu/drm/panel/panel-sitronix-st7703.c | 83 ++++++++-----------
> 1 file changed, 33 insertions(+), 50 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> index 86a472b01360..3e6655c2727e 100644
> --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> @@ -73,14 +73,6 @@ static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
> return container_of(panel, struct st7703, panel);
> }
>
> -#define dsi_generic_write_seq(dsi, seq...) do { \
> - static const u8 d[] = { seq }; \
> - int ret; \
> - ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \
> - if (ret < 0) \
> - return ret; \
> - } while (0)
> -
> static int jh057n_init_sequence(struct st7703 *ctx)
> {
> struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> @@ -90,27 +82,27 @@ static int jh057n_init_sequence(struct st7703 *ctx)
> * resemble the ST7703 but the number of parameters often don't match
> * so it's likely a clone.
> */
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
> 0xF1, 0x12, 0x83);
Fix indent here, and in similar places below.
With that fixed:
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
> 0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
> 0x00, 0x00);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
> 0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
> 0x00);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
> 0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
> 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
> msleep(20);
>
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
> - dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
> 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
> 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
> 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
> @@ -119,7 +111,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
> 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
> 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
> 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
> 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
> @@ -128,7 +120,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
> 0xA5, 0x00, 0x00, 0x00, 0x00);
> - dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
> 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
> 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
> 0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
> @@ -162,15 +154,6 @@ static const struct st7703_panel_desc jh057n00900_panel_desc = {
> .init_sequence = jh057n_init_sequence,
> };
>
> -#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
> - static const u8 d[] = { seq }; \
> - int ret; \
> - ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
> - if (ret < 0) \
> - return ret; \
> - } while (0)
> -
> -
> static int xbd599_init_sequence(struct st7703 *ctx)
> {
> struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> @@ -180,9 +163,9 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> */
>
> /* Magic sequence to unlock user commands below. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
>
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
> 0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */
> 0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */
> 0x05, /* IHSRX = x6 (Low High Speed driving ability) */
> @@ -194,14 +177,14 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02,
> 0x4F, 0x11, 0x00, 0x00, 0x37);
>
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
> 0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */
> 0x22, /* DT = 15ms XDK_ECP = x2 */
> 0x20, /* PFM_DC_DIV = /1 */
> 0x03 /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */);
>
> /* RGB I/F porch timing */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
> 0x10, /* VBP_RGB_GEN */
> 0x10, /* VFP_RGB_GEN */
> 0x05, /* DE_BP_RGB_GEN */
> @@ -212,7 +195,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0x00, 0x00);
>
> /* Source driving settings. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
> 0x73, /* N_POPON */
> 0x73, /* N_NOPON */
> 0x50, /* I_POPON */
> @@ -224,19 +207,19 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0x00 /* Undocumented */);
>
> /* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
>
> /*
> * SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan)
> * REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR)
> */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
>
> /* Zig-Zag Type C column inversion. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
>
> /* Set display resolution. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
> 0xF0, /* NL = 240 */
> 0x12, /* RES_V_LSB = 0, BLK_CON = VSSD,
> * RESO_SEL = 720RGB
> @@ -246,7 +229,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> * ISC = 0 frames
> */);
>
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
> 0x00, /* PNOEQ */
> 0x00, /* NNOEQ */
> 0x0B, /* PEQGND */
> @@ -267,9 +250,9 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> */);
>
> /* Undocumented command. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
>
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
> 0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
> 0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */
> 0x32, /* VRP */
> @@ -287,20 +270,20 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0x77 /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */);
>
> /* Reference voltage. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
> 0x07, /* VREF_SEL = 4.2V */
> 0x07 /* NVREF_SEL = 4.2V */);
> msleep(20);
>
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
> 0x2C, /* VCOMDC_F = -0.67V */
> 0x2C /* VCOMDC_B = -0.67V */);
>
> /* Undocumented command. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
>
> /* This command is to set forward GIP timing. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
> 0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
> 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
> 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
> @@ -311,7 +294,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
>
> /* This command is to set backward GIP timing. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
> 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
> 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
> @@ -322,7 +305,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
> 0xA5, 0x00, 0x00, 0x00, 0x00);
>
> /* Adjust the gamma characteristics of the panel. */
> - dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
> 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
> 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
> 0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
> @@ -499,7 +482,7 @@ static int allpixelson_set(void *data, u64 val)
> struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>
> dev_dbg(ctx->dev, "Setting all pixels on\n");
> - dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
> + mipi_dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
> msleep(val * 1000);
> /* Reset the panel to get video back */
> drm_panel_disable(&ctx->panel);
> --
> 2.38.1
next prev parent reply other threads:[~2023-01-02 18:43 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-28 1:47 [PATCH 00/14] drm/panel: Make panel drivers use existing DSI write macros Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2022-12-28 1:47 ` [PATCH 01/14] drm/mipi-dsi: Add a mipi_dsi_dcs_write_seq() macro Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2022-12-29 15:36 ` kernel test robot
2022-12-29 15:36 ` kernel test robot
2023-01-02 18:39 ` Sam Ravnborg
2023-01-02 18:39 ` Sam Ravnborg
2023-01-02 18:59 ` Javier Martinez Canillas
2023-01-02 18:59 ` Javier Martinez Canillas
2023-01-02 19:02 ` Sam Ravnborg
2023-01-02 19:02 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 02/14] drm/panel-asus-z00t-tm5p5-n35596: Drop custom DSI write macros Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2022-12-28 1:47 ` [PATCH 03/14] drm/panel-sitronix-st7703: " Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2022-12-28 12:01 ` Guido Günther
2022-12-28 12:01 ` Guido Günther
2022-12-29 14:30 ` Javier Martinez Canillas
2022-12-29 14:30 ` Javier Martinez Canillas
2023-01-02 18:42 ` Sam Ravnborg [this message]
2023-01-02 18:42 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 04/14] drm/panel-leadtek-ltk050h3146w: Drop custom DSI write macro Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:43 ` Sam Ravnborg
2023-01-02 18:43 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 05/14] drm/panel-elida-kd35t133: " Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:44 ` Sam Ravnborg
2023-01-02 18:44 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 06/14] drm/panel-boe-bf060y8m-aj0: " Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:45 ` Sam Ravnborg
2023-01-02 18:45 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 07/14] drm/panel-novatek-nt35950: " Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:55 ` Sam Ravnborg
2023-01-02 18:55 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 08/14] drm/panel-jdi-fhd-r63452: Drop custom DSI write macros Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:46 ` Sam Ravnborg
2023-01-02 18:46 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 09/14] drm/panel-samsung-s6e88a0-ams452ef01: Drop custom DSI write macro Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:48 ` Sam Ravnborg
2023-01-02 18:48 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 10/14] drm/panel-samsung-sofef00: " Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:56 ` Sam Ravnborg
2023-01-02 18:56 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 11/14] drm/panel-sharp-ls060t1sx01: " Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:50 ` Sam Ravnborg
2023-01-02 18:50 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 12/14] drm/panel-mantix-mlaf057we51: " Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:56 ` Sam Ravnborg
2023-01-02 18:56 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 13/14] drm/panel-sony-tulip-truly-nt35521: " Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:51 ` Sam Ravnborg
2023-01-02 18:51 ` Sam Ravnborg
2022-12-28 1:47 ` [PATCH 14/14] drm/panel-xinpeng-xpp055c272: " Javier Martinez Canillas
2022-12-28 1:47 ` Javier Martinez Canillas
2023-01-02 18:53 ` Sam Ravnborg
2023-01-02 18:53 ` Sam Ravnborg
2023-01-02 19:08 ` Javier Martinez Canillas
2023-01-02 19:08 ` Javier Martinez Canillas
2023-01-02 19:00 ` [PATCH 00/14] drm/panel: Make panel drivers use existing DSI write macros Sam Ravnborg
2023-01-02 19:00 ` Sam Ravnborg
2023-01-02 19:13 ` Javier Martinez Canillas
2023-01-02 19:13 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y7Mlf5a9jp42w73t@ravnborg.org \
--to=sam@ravnborg.org \
--cc=agx@sigxcpu.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=javierm@redhat.com \
--cc=kernel@puri.sm \
--cc=linux-kernel@vger.kernel.org \
--cc=megous@megous.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.