[PATCH 00/28] glib: Replace g_memdup() by g_memdup2_qemu()

[PATCH 00/28] glib: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

g_memdup() as been deprecated in GLib 2.68. Since QEMU defines
GLIB_VERSION_MAX_ALLOWED to GLIB_VERSION_2_56, the deprecation
is not displayed (on GLib >= 2.68 such available on Fedora 34).
However the function is still unsafe, so it is better to avoid
its use.

This series provides the safely equivalent g_memdup2_qemu()
wrapper, and replace all g_memdup() calls by it.

The previous link recommend to audit the call sites. Most of the
calls use byte_size=sizeof(STRUCT), and no STRUCT appears to be
> 4GiB.  Few calls use unsigned/size_t/uint16_t. Where code is
doing multiplication, patches are sent as RFC. In particular:
    hw/net/virtio-net.c
    hw/virtio/virtio-crypto.c

Please review,

Phil.

Philippe Mathieu-Daudé (28):
  hw/hyperv/vmbus: Remove unused vmbus_load/save_req()
  glib-compat: Introduce g_memdup2() wrapper
  qapi: Replace g_memdup() by g_memdup2_qemu()
  accel/tcg: Replace g_memdup() by g_memdup2_qemu()
  block/qcow2-bitmap: Replace g_memdup() by g_memdup2_qemu()
  softmmu: Replace g_memdup() by g_memdup2_qemu()
  hw/9pfs: Replace g_memdup() by g_memdup2_qemu()
  hw/acpi: Avoid truncating acpi_data_len() to 32-bit
  hw/acpi: Replace g_memdup() by g_memdup2_qemu()
  hw/core/machine: Replace g_memdup() by g_memdup2_qemu()
  hw/hppa/machine: Replace g_memdup() by g_memdup2_qemu()
  hw/i386/multiboot: Replace g_memdup() by g_memdup2_qemu()
  hw/net/eepro100: Replace g_memdup() by g_memdup2_qemu()
  hw/nvram/fw_cfg: Replace g_memdup() by g_memdup2_qemu()
  hw/scsi/mptsas: Replace g_memdup() by g_memdup2_qemu()
  hw/ppc/spapr_pci: Replace g_memdup() by g_memdup2_qemu()
  hw/rdma: Replace g_memdup() by g_memdup2_qemu()
  hw/vfio/pci: Replace g_memdup() by g_memdup2_qemu()
  RFC hw/virtio: Replace g_memdup() by g_memdup2_qemu()
  net/colo: Replace g_memdup() by g_memdup2_qemu()
  RFC ui/clipboard: Replace g_memdup() by g_memdup2_qemu()
  RFC linux-user: Replace g_memdup() by g_memdup2_qemu()
  tests/unit: Replace g_memdup() by g_memdup2_qemu()
  tests/qtest: Replace g_memdup() by g_memdup2_qemu()
  target/arm: Replace g_memdup() by g_memdup2_qemu()
  target/ppc: Replace g_memdup() by g_memdup2_qemu()
  contrib: Replace g_memdup() by g_memdup2_qemu()
  checkpatch: Do not allow deprecated g_memdup()

 include/glib-compat.h       | 36 ++++++++++++++++++++++
 include/hw/hyperv/vmbus.h   |  3 --
 accel/tcg/cputlb.c          |  8 ++---
 block/qcow2-bitmap.c        |  2 +-
 contrib/plugins/lockstep.c  |  2 +-
 contrib/rdmacm-mux/main.c   | 10 +++----
 hw/9pfs/9p-synth.c          |  2 +-
 hw/9pfs/9p.c                |  2 +-
 hw/acpi/core.c              |  3 +-
 hw/arm/virt-acpi-build.c    |  2 +-
 hw/core/machine.c           |  4 +--
 hw/hppa/machine.c           |  8 ++---
 hw/hyperv/vmbus.c           | 59 -------------------------------------
 hw/i386/acpi-build.c        |  6 ++--
 hw/i386/multiboot.c         |  2 +-
 hw/net/eepro100.c           |  2 +-
 hw/net/virtio-net.c         |  3 +-
 hw/nvram/fw_cfg.c           |  9 +++---
 hw/ppc/spapr_pci.c          |  8 ++---
 hw/rdma/rdma_utils.c        |  2 +-
 hw/scsi/mptsas.c            |  5 ++--
 hw/vfio/pci.c               |  2 +-
 hw/virtio/virtio-crypto.c   |  7 +++--
 linux-user/syscall.c        |  2 +-
 linux-user/uaccess.c        |  2 +-
 net/colo.c                  |  4 +--
 qapi/qapi-clone-visitor.c   | 16 +++++-----
 qapi/qapi-visit-core.c      |  6 ++--
 softmmu/memory.c            |  2 +-
 softmmu/vl.c                |  2 +-
 target/arm/helper.c         |  7 +++--
 target/ppc/mmu-hash64.c     |  3 +-
 tests/qtest/libqos/ahci.c   |  6 ++--
 tests/qtest/libqos/qgraph.c |  2 +-
 tests/unit/ptimer-test.c    | 22 +++++++-------
 tests/unit/test-iov.c       | 26 ++++++++--------
 ui/clipboard.c              |  2 +-
 scripts/checkpatch.pl       |  5 ++++
 38 files changed, 141 insertions(+), 153 deletions(-)

-- 
2.31.1

[PATCH 00/28] glib: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

g_memdup() as been deprecated in GLib 2.68. Since QEMU defines
GLIB_VERSION_MAX_ALLOWED to GLIB_VERSION_2_56, the deprecation
is not displayed (on GLib >= 2.68 such available on Fedora 34).
However the function is still unsafe, so it is better to avoid
its use.

This series provides the safely equivalent g_memdup2_qemu()
wrapper, and replace all g_memdup() calls by it.

The previous link recommend to audit the call sites. Most of the
calls use byte_size=sizeof(STRUCT), and no STRUCT appears to be
> 4GiB.  Few calls use unsigned/size_t/uint16_t. Where code is
doing multiplication, patches are sent as RFC. In particular:
    hw/net/virtio-net.c
    hw/virtio/virtio-crypto.c

Please review,

Phil.

Philippe Mathieu-Daudé (28):
  hw/hyperv/vmbus: Remove unused vmbus_load/save_req()
  glib-compat: Introduce g_memdup2() wrapper
  qapi: Replace g_memdup() by g_memdup2_qemu()
  accel/tcg: Replace g_memdup() by g_memdup2_qemu()
  block/qcow2-bitmap: Replace g_memdup() by g_memdup2_qemu()
  softmmu: Replace g_memdup() by g_memdup2_qemu()
  hw/9pfs: Replace g_memdup() by g_memdup2_qemu()
  hw/acpi: Avoid truncating acpi_data_len() to 32-bit
  hw/acpi: Replace g_memdup() by g_memdup2_qemu()
  hw/core/machine: Replace g_memdup() by g_memdup2_qemu()
  hw/hppa/machine: Replace g_memdup() by g_memdup2_qemu()
  hw/i386/multiboot: Replace g_memdup() by g_memdup2_qemu()
  hw/net/eepro100: Replace g_memdup() by g_memdup2_qemu()
  hw/nvram/fw_cfg: Replace g_memdup() by g_memdup2_qemu()
  hw/scsi/mptsas: Replace g_memdup() by g_memdup2_qemu()
  hw/ppc/spapr_pci: Replace g_memdup() by g_memdup2_qemu()
  hw/rdma: Replace g_memdup() by g_memdup2_qemu()
  hw/vfio/pci: Replace g_memdup() by g_memdup2_qemu()
  RFC hw/virtio: Replace g_memdup() by g_memdup2_qemu()
  net/colo: Replace g_memdup() by g_memdup2_qemu()
  RFC ui/clipboard: Replace g_memdup() by g_memdup2_qemu()
  RFC linux-user: Replace g_memdup() by g_memdup2_qemu()
  tests/unit: Replace g_memdup() by g_memdup2_qemu()
  tests/qtest: Replace g_memdup() by g_memdup2_qemu()
  target/arm: Replace g_memdup() by g_memdup2_qemu()
  target/ppc: Replace g_memdup() by g_memdup2_qemu()
  contrib: Replace g_memdup() by g_memdup2_qemu()
  checkpatch: Do not allow deprecated g_memdup()

 include/glib-compat.h       | 36 ++++++++++++++++++++++
 include/hw/hyperv/vmbus.h   |  3 --
 accel/tcg/cputlb.c          |  8 ++---
 block/qcow2-bitmap.c        |  2 +-
 contrib/plugins/lockstep.c  |  2 +-
 contrib/rdmacm-mux/main.c   | 10 +++----
 hw/9pfs/9p-synth.c          |  2 +-
 hw/9pfs/9p.c                |  2 +-
 hw/acpi/core.c              |  3 +-
 hw/arm/virt-acpi-build.c    |  2 +-
 hw/core/machine.c           |  4 +--
 hw/hppa/machine.c           |  8 ++---
 hw/hyperv/vmbus.c           | 59 -------------------------------------
 hw/i386/acpi-build.c        |  6 ++--
 hw/i386/multiboot.c         |  2 +-
 hw/net/eepro100.c           |  2 +-
 hw/net/virtio-net.c         |  3 +-
 hw/nvram/fw_cfg.c           |  9 +++---
 hw/ppc/spapr_pci.c          |  8 ++---
 hw/rdma/rdma_utils.c        |  2 +-
 hw/scsi/mptsas.c            |  5 ++--
 hw/vfio/pci.c               |  2 +-
 hw/virtio/virtio-crypto.c   |  7 +++--
 linux-user/syscall.c        |  2 +-
 linux-user/uaccess.c        |  2 +-
 net/colo.c                  |  4 +--
 qapi/qapi-clone-visitor.c   | 16 +++++-----
 qapi/qapi-visit-core.c      |  6 ++--
 softmmu/memory.c            |  2 +-
 softmmu/vl.c                |  2 +-
 target/arm/helper.c         |  7 +++--
 target/ppc/mmu-hash64.c     |  3 +-
 tests/qtest/libqos/ahci.c   |  6 ++--
 tests/qtest/libqos/qgraph.c |  2 +-
 tests/unit/ptimer-test.c    | 22 +++++++-------
 tests/unit/test-iov.c       | 26 ++++++++--------
 ui/clipboard.c              |  2 +-
 scripts/checkpatch.pl       |  5 ++++
 38 files changed, 141 insertions(+), 153 deletions(-)

-- 
2.31.1

[PATCH 01/28] hw/hyperv/vmbus: Remove unused vmbus_load/save_req()

[Philippe Mathieu-Daudé]

vmbus_save_req() and vmbus_load_req() are not used.
Remove them to avoid maintaining dead code.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 include/hw/hyperv/vmbus.h |  3 --
 hw/hyperv/vmbus.c         | 59 ---------------------------------------
 2 files changed, 62 deletions(-)

diff --git a/include/hw/hyperv/vmbus.h b/include/hw/hyperv/vmbus.h
index f98bea3888d..8ea660dd8e6 100644
--- a/include/hw/hyperv/vmbus.h
+++ b/include/hw/hyperv/vmbus.h
@@ -223,7 +223,4 @@ int vmbus_map_sgl(VMBusChanReq *req, DMADirection dir, struct iovec *iov,
 void vmbus_unmap_sgl(VMBusChanReq *req, DMADirection dir, struct iovec *iov,
                      unsigned iov_cnt, size_t accessed);
 
-void vmbus_save_req(QEMUFile *f, VMBusChanReq *req);
-void *vmbus_load_req(QEMUFile *f, VMBusDevice *dev, uint32_t size);
-
 #endif
diff --git a/hw/hyperv/vmbus.c b/hw/hyperv/vmbus.c
index c9887d5a7bc..18d3c3b9240 100644
--- a/hw/hyperv/vmbus.c
+++ b/hw/hyperv/vmbus.c
@@ -1311,65 +1311,6 @@ static const VMStateDescription vmstate_vmbus_chan_req = {
     }
 };
 
-void vmbus_save_req(QEMUFile *f, VMBusChanReq *req)
-{
-    VMBusChanReqSave req_save;
-
-    req_save.chan_idx = req->chan->subchan_idx;
-    req_save.pkt_type = req->pkt_type;
-    req_save.msglen = req->msglen;
-    req_save.msg = req->msg;
-    req_save.transaction_id = req->transaction_id;
-    req_save.need_comp = req->need_comp;
-    req_save.num = req->sgl.nsg;
-    req_save.sgl = g_memdup(req->sgl.sg,
-                            req_save.num * sizeof(ScatterGatherEntry));
-
-    vmstate_save_state(f, &vmstate_vmbus_chan_req, &req_save, NULL);
-
-    g_free(req_save.sgl);
-}
-
-void *vmbus_load_req(QEMUFile *f, VMBusDevice *dev, uint32_t size)
-{
-    VMBusChanReqSave req_save;
-    VMBusChanReq *req = NULL;
-    VMBusChannel *chan = NULL;
-    uint32_t i;
-
-    vmstate_load_state(f, &vmstate_vmbus_chan_req, &req_save, 0);
-
-    if (req_save.chan_idx >= dev->num_channels) {
-        error_report("%s: %u(chan_idx) > %u(num_channels)", __func__,
-                     req_save.chan_idx, dev->num_channels);
-        goto out;
-    }
-    chan = &dev->channels[req_save.chan_idx];
-
-    if (vmbus_channel_reserve(chan, 0, req_save.msglen)) {
-        goto out;
-    }
-
-    req = vmbus_alloc_req(chan, size, req_save.pkt_type, req_save.msglen,
-                          req_save.transaction_id, req_save.need_comp);
-    if (req_save.msglen) {
-        memcpy(req->msg, req_save.msg, req_save.msglen);
-    }
-
-    for (i = 0; i < req_save.num; i++) {
-        qemu_sglist_add(&req->sgl, req_save.sgl[i].base, req_save.sgl[i].len);
-    }
-
-out:
-    if (req_save.msglen) {
-        g_free(req_save.msg);
-    }
-    if (req_save.num) {
-        g_free(req_save.sgl);
-    }
-    return req;
-}
-
 static void channel_event_cb(EventNotifier *e)
 {
     VMBusChannel *chan = container_of(e, VMBusChannel, notifier);
-- 
2.31.1

[PATCH 01/28] hw/hyperv/vmbus: Remove unused vmbus_load/save_req()

[Philippe Mathieu-Daudé]

vmbus_save_req() and vmbus_load_req() are not used.
Remove them to avoid maintaining dead code.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 include/hw/hyperv/vmbus.h |  3 --
 hw/hyperv/vmbus.c         | 59 ---------------------------------------
 2 files changed, 62 deletions(-)

diff --git a/include/hw/hyperv/vmbus.h b/include/hw/hyperv/vmbus.h
index f98bea3888d..8ea660dd8e6 100644
--- a/include/hw/hyperv/vmbus.h
+++ b/include/hw/hyperv/vmbus.h
@@ -223,7 +223,4 @@ int vmbus_map_sgl(VMBusChanReq *req, DMADirection dir, struct iovec *iov,
 void vmbus_unmap_sgl(VMBusChanReq *req, DMADirection dir, struct iovec *iov,
                      unsigned iov_cnt, size_t accessed);
 
-void vmbus_save_req(QEMUFile *f, VMBusChanReq *req);
-void *vmbus_load_req(QEMUFile *f, VMBusDevice *dev, uint32_t size);
-
 #endif
diff --git a/hw/hyperv/vmbus.c b/hw/hyperv/vmbus.c
index c9887d5a7bc..18d3c3b9240 100644
--- a/hw/hyperv/vmbus.c
+++ b/hw/hyperv/vmbus.c
@@ -1311,65 +1311,6 @@ static const VMStateDescription vmstate_vmbus_chan_req = {
     }
 };
 
-void vmbus_save_req(QEMUFile *f, VMBusChanReq *req)
-{
-    VMBusChanReqSave req_save;
-
-    req_save.chan_idx = req->chan->subchan_idx;
-    req_save.pkt_type = req->pkt_type;
-    req_save.msglen = req->msglen;
-    req_save.msg = req->msg;
-    req_save.transaction_id = req->transaction_id;
-    req_save.need_comp = req->need_comp;
-    req_save.num = req->sgl.nsg;
-    req_save.sgl = g_memdup(req->sgl.sg,
-                            req_save.num * sizeof(ScatterGatherEntry));
-
-    vmstate_save_state(f, &vmstate_vmbus_chan_req, &req_save, NULL);
-
-    g_free(req_save.sgl);
-}
-
-void *vmbus_load_req(QEMUFile *f, VMBusDevice *dev, uint32_t size)
-{
-    VMBusChanReqSave req_save;
-    VMBusChanReq *req = NULL;
-    VMBusChannel *chan = NULL;
-    uint32_t i;
-
-    vmstate_load_state(f, &vmstate_vmbus_chan_req, &req_save, 0);
-
-    if (req_save.chan_idx >= dev->num_channels) {
-        error_report("%s: %u(chan_idx) > %u(num_channels)", __func__,
-                     req_save.chan_idx, dev->num_channels);
-        goto out;
-    }
-    chan = &dev->channels[req_save.chan_idx];
-
-    if (vmbus_channel_reserve(chan, 0, req_save.msglen)) {
-        goto out;
-    }
-
-    req = vmbus_alloc_req(chan, size, req_save.pkt_type, req_save.msglen,
-                          req_save.transaction_id, req_save.need_comp);
-    if (req_save.msglen) {
-        memcpy(req->msg, req_save.msg, req_save.msglen);
-    }
-
-    for (i = 0; i < req_save.num; i++) {
-        qemu_sglist_add(&req->sgl, req_save.sgl[i].base, req_save.sgl[i].len);
-    }
-
-out:
-    if (req_save.msglen) {
-        g_free(req_save.msg);
-    }
-    if (req_save.num) {
-        g_free(req_save.sgl);
-    }
-    return req;
-}
-
 static void channel_event_cb(EventNotifier *e)
 {
     VMBusChannel *chan = container_of(e, VMBusChannel, notifier);
-- 
2.31.1

[PATCH 02/28] glib-compat: Introduce g_memdup2() wrapper

[Philippe Mathieu-Daudé]

When experimenting raising GLIB_VERSION_MIN_REQUIRED to 2.68
(Fedora 34 provides GLib 2.68.1) we get:

  hw/virtio/virtio-crypto.c:245:24: error: 'g_memdup' is deprecated: Use 'g_memdup2' instead [-Werror,-Wdeprecated-declarations]
  ...

g_memdup() has been updated by g_memdup2() to fix eventual security
issues (size argument is 32-bit and could be truncated / wrapping).
GLib recommends to copy their static inline version of g_memdup2():
https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

Our glib-compat.h provides a comment explaining how to deal with
these deprecated declarations (see commit e71e8cc0355
"glib: enforce the minimum required version and warn about old APIs").

Following this comment suggestion, implement the g_memdup2_qemu()
wrapper to g_memdup2(), and use the safer equivalent inlined when
we are using pre-2.68 GLib.

Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 include/glib-compat.h | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/include/glib-compat.h b/include/glib-compat.h
index 9e95c888f54..6577d9ab393 100644
--- a/include/glib-compat.h
+++ b/include/glib-compat.h
@@ -68,6 +68,42 @@
  * without generating warnings.
  */
 
+/*
+ * g_memdup2_qemu:
+ * @mem: (nullable): the memory to copy.
+ * @byte_size: the number of bytes to copy.
+ *
+ * Allocates @byte_size bytes of memory, and copies @byte_size bytes into it
+ * from @mem. If @mem is %NULL it returns %NULL.
+ *
+ * This replaces g_memdup(), which was prone to integer overflows when
+ * converting the argument from a #gsize to a #guint.
+ *
+ * This static inline version is a backport of the new public API from
+ * GLib 2.68, kept internal to GLib for backport to older stable releases.
+ * See https://gitlab.gnome.org/GNOME/glib/-/issues/2319.
+ *
+ * Returns: (nullable): a pointer to the newly-allocated copy of the memory,
+ *          or %NULL if @mem is %NULL.
+ */
+static inline gpointer g_memdup2_qemu(gconstpointer mem, gsize byte_size)
+{
+#if GLIB_CHECK_VERSION(2, 68, 0)
+    return g_memdup2(mem, byte_size);
+#else
+    gpointer new_mem;
+
+    if (mem && byte_size != 0) {
+        new_mem = g_malloc(byte_size);
+        memcpy(new_mem, mem, byte_size);
+    } else {
+        new_mem = NULL;
+    }
+
+    return new_mem;
+#endif
+}
+
 #if defined(G_OS_UNIX)
 /*
  * Note: The fallback implementation is not MT-safe, and it returns a copy of
-- 
2.31.1

[PATCH 02/28] glib-compat: Introduce g_memdup2() wrapper

[Philippe Mathieu-Daudé]

When experimenting raising GLIB_VERSION_MIN_REQUIRED to 2.68
(Fedora 34 provides GLib 2.68.1) we get:

  hw/virtio/virtio-crypto.c:245:24: error: 'g_memdup' is deprecated: Use 'g_memdup2' instead [-Werror,-Wdeprecated-declarations]
  ...

g_memdup() has been updated by g_memdup2() to fix eventual security
issues (size argument is 32-bit and could be truncated / wrapping).
GLib recommends to copy their static inline version of g_memdup2():
https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

Our glib-compat.h provides a comment explaining how to deal with
these deprecated declarations (see commit e71e8cc0355
"glib: enforce the minimum required version and warn about old APIs").

Following this comment suggestion, implement the g_memdup2_qemu()
wrapper to g_memdup2(), and use the safer equivalent inlined when
we are using pre-2.68 GLib.

Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 include/glib-compat.h | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/include/glib-compat.h b/include/glib-compat.h
index 9e95c888f54..6577d9ab393 100644
--- a/include/glib-compat.h
+++ b/include/glib-compat.h
@@ -68,6 +68,42 @@
  * without generating warnings.
  */
 
+/*
+ * g_memdup2_qemu:
+ * @mem: (nullable): the memory to copy.
+ * @byte_size: the number of bytes to copy.
+ *
+ * Allocates @byte_size bytes of memory, and copies @byte_size bytes into it
+ * from @mem. If @mem is %NULL it returns %NULL.
+ *
+ * This replaces g_memdup(), which was prone to integer overflows when
+ * converting the argument from a #gsize to a #guint.
+ *
+ * This static inline version is a backport of the new public API from
+ * GLib 2.68, kept internal to GLib for backport to older stable releases.
+ * See https://gitlab.gnome.org/GNOME/glib/-/issues/2319.
+ *
+ * Returns: (nullable): a pointer to the newly-allocated copy of the memory,
+ *          or %NULL if @mem is %NULL.
+ */
+static inline gpointer g_memdup2_qemu(gconstpointer mem, gsize byte_size)
+{
+#if GLIB_CHECK_VERSION(2, 68, 0)
+    return g_memdup2(mem, byte_size);
+#else
+    gpointer new_mem;
+
+    if (mem && byte_size != 0) {
+        new_mem = g_malloc(byte_size);
+        memcpy(new_mem, mem, byte_size);
+    } else {
+        new_mem = NULL;
+    }
+
+    return new_mem;
+#endif
+}
+
 #if defined(G_OS_UNIX)
 /*
  * Note: The fallback implementation is not MT-safe, and it returns a copy of
-- 
2.31.1

Re: [PATCH 02/28] glib-compat: Introduce g_memdup2() wrapper

[Daniel P. Berrangé]

On Fri, Sep 03, 2021 at 01:06:36PM +0200, Philippe Mathieu-Daudé wrote:
> When experimenting raising GLIB_VERSION_MIN_REQUIRED to 2.68
> (Fedora 34 provides GLib 2.68.1) we get:
> 
>   hw/virtio/virtio-crypto.c:245:24: error: 'g_memdup' is deprecated: Use 'g_memdup2' instead [-Werror,-Wdeprecated-declarations]
>   ...
> 
> g_memdup() has been updated by g_memdup2() to fix eventual security
> issues (size argument is 32-bit and could be truncated / wrapping).
> GLib recommends to copy their static inline version of g_memdup2():
> https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
> 
> Our glib-compat.h provides a comment explaining how to deal with
> these deprecated declarations (see commit e71e8cc0355
> "glib: enforce the minimum required version and warn about old APIs").
> 
> Following this comment suggestion, implement the g_memdup2_qemu()
> wrapper to g_memdup2(), and use the safer equivalent inlined when
> we are using pre-2.68 GLib.
> 
> Reported-by: Eric Blake <eblake@redhat.com>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
>  include/glib-compat.h | 36 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/include/glib-compat.h b/include/glib-compat.h
> index 9e95c888f54..6577d9ab393 100644
> --- a/include/glib-compat.h
> +++ b/include/glib-compat.h
> @@ -68,6 +68,42 @@
>   * without generating warnings.
>   */
>  
> +/*
> + * g_memdup2_qemu:
> + * @mem: (nullable): the memory to copy.
> + * @byte_size: the number of bytes to copy.
> + *
> + * Allocates @byte_size bytes of memory, and copies @byte_size bytes into it
> + * from @mem. If @mem is %NULL it returns %NULL.
> + *
> + * This replaces g_memdup(), which was prone to integer overflows when
> + * converting the argument from a #gsize to a #guint.
> + *
> + * This static inline version is a backport of the new public API from
> + * GLib 2.68, kept internal to GLib for backport to older stable releases.
> + * See https://gitlab.gnome.org/GNOME/glib/-/issues/2319.
> + *
> + * Returns: (nullable): a pointer to the newly-allocated copy of the memory,
> + *          or %NULL if @mem is %NULL.
> + */
> +static inline gpointer g_memdup2_qemu(gconstpointer mem, gsize byte_size)
> +{
> +#if GLIB_CHECK_VERSION(2, 68, 0)
> +    return g_memdup2(mem, byte_size);
> +#else
> +    gpointer new_mem;
> +
> +    if (mem && byte_size != 0) {
> +        new_mem = g_malloc(byte_size);
> +        memcpy(new_mem, mem, byte_size);
> +    } else {
> +        new_mem = NULL;
> +    }
> +
> +    return new_mem;
> +#endif
> +}

Close, but you missed the final piece of the puzzle

   #define g_memdup2(a) g_memdup2_qemu(a)


Such that in all following patches you can use the normal "g_memdup2"
API. This means when we later update min glib, we just delete the
compat code here, and the callers don't need updates.

Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|

Re: [PATCH 02/28] glib-compat: Introduce g_memdup2() wrapper

[Daniel P. Berrangé]

On Fri, Sep 03, 2021 at 01:06:36PM +0200, Philippe Mathieu-Daudé wrote:
> When experimenting raising GLIB_VERSION_MIN_REQUIRED to 2.68
> (Fedora 34 provides GLib 2.68.1) we get:
> 
>   hw/virtio/virtio-crypto.c:245:24: error: 'g_memdup' is deprecated: Use 'g_memdup2' instead [-Werror,-Wdeprecated-declarations]
>   ...
> 
> g_memdup() has been updated by g_memdup2() to fix eventual security
> issues (size argument is 32-bit and could be truncated / wrapping).
> GLib recommends to copy their static inline version of g_memdup2():
> https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
> 
> Our glib-compat.h provides a comment explaining how to deal with
> these deprecated declarations (see commit e71e8cc0355
> "glib: enforce the minimum required version and warn about old APIs").
> 
> Following this comment suggestion, implement the g_memdup2_qemu()
> wrapper to g_memdup2(), and use the safer equivalent inlined when
> we are using pre-2.68 GLib.
> 
> Reported-by: Eric Blake <eblake@redhat.com>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
>  include/glib-compat.h | 36 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/include/glib-compat.h b/include/glib-compat.h
> index 9e95c888f54..6577d9ab393 100644
> --- a/include/glib-compat.h
> +++ b/include/glib-compat.h
> @@ -68,6 +68,42 @@
>   * without generating warnings.
>   */
>  
> +/*
> + * g_memdup2_qemu:
> + * @mem: (nullable): the memory to copy.
> + * @byte_size: the number of bytes to copy.
> + *
> + * Allocates @byte_size bytes of memory, and copies @byte_size bytes into it
> + * from @mem. If @mem is %NULL it returns %NULL.
> + *
> + * This replaces g_memdup(), which was prone to integer overflows when
> + * converting the argument from a #gsize to a #guint.
> + *
> + * This static inline version is a backport of the new public API from
> + * GLib 2.68, kept internal to GLib for backport to older stable releases.
> + * See https://gitlab.gnome.org/GNOME/glib/-/issues/2319.
> + *
> + * Returns: (nullable): a pointer to the newly-allocated copy of the memory,
> + *          or %NULL if @mem is %NULL.
> + */
> +static inline gpointer g_memdup2_qemu(gconstpointer mem, gsize byte_size)
> +{
> +#if GLIB_CHECK_VERSION(2, 68, 0)
> +    return g_memdup2(mem, byte_size);
> +#else
> +    gpointer new_mem;
> +
> +    if (mem && byte_size != 0) {
> +        new_mem = g_malloc(byte_size);
> +        memcpy(new_mem, mem, byte_size);
> +    } else {
> +        new_mem = NULL;
> +    }
> +
> +    return new_mem;
> +#endif
> +}

Close, but you missed the final piece of the puzzle

   #define g_memdup2(a) g_memdup2_qemu(a)


Such that in all following patches you can use the normal "g_memdup2"
API. This means when we later update min glib, we just delete the
compat code here, and the callers don't need updates.

Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|

Re: [PATCH 02/28] glib-compat: Introduce g_memdup2() wrapper

[Vladimir Sementsov-Ogievskiy]

03.09.2021 14:16, Daniel P. Berrangé wrote:
> On Fri, Sep 03, 2021 at 01:06:36PM +0200, Philippe Mathieu-Daudé wrote:
>> When experimenting raising GLIB_VERSION_MIN_REQUIRED to 2.68
>> (Fedora 34 provides GLib 2.68.1) we get:
>>
>>    hw/virtio/virtio-crypto.c:245:24: error: 'g_memdup' is deprecated: Use 'g_memdup2' instead [-Werror,-Wdeprecated-declarations]
>>    ...
>>
>> g_memdup() has been updated by g_memdup2() to fix eventual security
>> issues (size argument is 32-bit and could be truncated / wrapping).
>> GLib recommends to copy their static inline version of g_memdup2():
>> https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
>>
>> Our glib-compat.h provides a comment explaining how to deal with
>> these deprecated declarations (see commit e71e8cc0355
>> "glib: enforce the minimum required version and warn about old APIs").
>>
>> Following this comment suggestion, implement the g_memdup2_qemu()
>> wrapper to g_memdup2(), and use the safer equivalent inlined when
>> we are using pre-2.68 GLib.
>>
>> Reported-by: Eric Blake <eblake@redhat.com>
>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> ---
>>   include/glib-compat.h | 36 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 36 insertions(+)
>>
>> diff --git a/include/glib-compat.h b/include/glib-compat.h
>> index 9e95c888f54..6577d9ab393 100644
>> --- a/include/glib-compat.h
>> +++ b/include/glib-compat.h
>> @@ -68,6 +68,42 @@
>>    * without generating warnings.
>>    */
>>   
>> +/*
>> + * g_memdup2_qemu:
>> + * @mem: (nullable): the memory to copy.
>> + * @byte_size: the number of bytes to copy.
>> + *
>> + * Allocates @byte_size bytes of memory, and copies @byte_size bytes into it
>> + * from @mem. If @mem is %NULL it returns %NULL.
>> + *
>> + * This replaces g_memdup(), which was prone to integer overflows when
>> + * converting the argument from a #gsize to a #guint.
>> + *
>> + * This static inline version is a backport of the new public API from
>> + * GLib 2.68, kept internal to GLib for backport to older stable releases.
>> + * See https://gitlab.gnome.org/GNOME/glib/-/issues/2319.
>> + *
>> + * Returns: (nullable): a pointer to the newly-allocated copy of the memory,
>> + *          or %NULL if @mem is %NULL.
>> + */
>> +static inline gpointer g_memdup2_qemu(gconstpointer mem, gsize byte_size)
>> +{
>> +#if GLIB_CHECK_VERSION(2, 68, 0)
>> +    return g_memdup2(mem, byte_size);
>> +#else
>> +    gpointer new_mem;
>> +
>> +    if (mem && byte_size != 0) {
>> +        new_mem = g_malloc(byte_size);
>> +        memcpy(new_mem, mem, byte_size);
>> +    } else {
>> +        new_mem = NULL;
>> +    }
>> +
>> +    return new_mem;
>> +#endif
>> +}
> 
> Close, but you missed the final piece of the puzzle
> 
>     #define g_memdup2(a) g_memdup2_qemu(a)
> 
> 
> Such that in all following patches you can use the normal "g_memdup2"
> API. This means when we later update min glib, we just delete the
> compat code here, and the callers don't need updates.
> 

That was most probably already discussed, so sorry my question:

Why we can't just do

#if ! GLIB_CHECK_VERSION(2, 68, 0)
static inline gpointer g_memdup2(gconstpointer mem, gsize byte_size)
{
     gpointer new_mem;

     if (mem && byte_size != 0) {
         new_mem = g_malloc(byte_size);
         memcpy(new_mem, mem, byte_size);
     } else {
         new_mem = NULL;
     }

     return new_mem;
}
#endif

?


-- 
Best regards,
Vladimir

Re: [PATCH 02/28] glib-compat: Introduce g_memdup2() wrapper

[Daniel P. Berrangé]

On Fri, Sep 03, 2021 at 02:51:21PM +0300, Vladimir Sementsov-Ogievskiy wrote:
> That was most probably already discussed, so sorry my question:
> 
> Why we can't just do
> 
> #if ! GLIB_CHECK_VERSION(2, 68, 0)
> static inline gpointer g_memdup2(gconstpointer mem, gsize byte_size)
> {
>     gpointer new_mem;
> 
>     if (mem && byte_size != 0) {
>         new_mem = g_malloc(byte_size);
>         memcpy(new_mem, mem, byte_size);
>     } else {
>         new_mem = NULL;
>     }
> 
>     return new_mem;
> }
> #endif
> 
> ?

This doesn't play with GLIB_VERSION_MAX_ALLOWED - any use of
g_memdup2 will trigger compile warnings since we're using an
API that only exists in a glib version newer than our declared
baseline.

The inline wrapper  + macro is a trick that lets us backport
new features, while avoiding the compile warnings.

This is documented in the include/glib-compat.h file that Philippe
is modifying.

Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|

Re: [PATCH 02/28] glib-compat: Introduce g_memdup2() wrapper

[Daniel P. Berrangé]

On Fri, Sep 03, 2021 at 02:51:21PM +0300, Vladimir Sementsov-Ogievskiy wrote:
> That was most probably already discussed, so sorry my question:
> 
> Why we can't just do
> 
> #if ! GLIB_CHECK_VERSION(2, 68, 0)
> static inline gpointer g_memdup2(gconstpointer mem, gsize byte_size)
> {
>     gpointer new_mem;
> 
>     if (mem && byte_size != 0) {
>         new_mem = g_malloc(byte_size);
>         memcpy(new_mem, mem, byte_size);
>     } else {
>         new_mem = NULL;
>     }
> 
>     return new_mem;
> }
> #endif
> 
> ?

This doesn't play with GLIB_VERSION_MAX_ALLOWED - any use of
g_memdup2 will trigger compile warnings since we're using an
API that only exists in a glib version newer than our declared
baseline.

The inline wrapper  + macro is a trick that lets us backport
new features, while avoiding the compile warnings.

This is documented in the include/glib-compat.h file that Philippe
is modifying.

Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|

Re: [PATCH 02/28] glib-compat: Introduce g_memdup2() wrapper

[Vladimir Sementsov-Ogievskiy]

03.09.2021 14:56, Daniel P. Berrangé wrote:
> On Fri, Sep 03, 2021 at 02:51:21PM +0300, Vladimir Sementsov-Ogievskiy wrote:
>> That was most probably already discussed, so sorry my question:
>>
>> Why we can't just do
>>
>> #if ! GLIB_CHECK_VERSION(2, 68, 0)
>> static inline gpointer g_memdup2(gconstpointer mem, gsize byte_size)
>> {
>>      gpointer new_mem;
>>
>>      if (mem && byte_size != 0) {
>>          new_mem = g_malloc(byte_size);
>>          memcpy(new_mem, mem, byte_size);
>>      } else {
>>          new_mem = NULL;
>>      }
>>
>>      return new_mem;
>> }
>> #endif
>>
>> ?
> 
> This doesn't play with GLIB_VERSION_MAX_ALLOWED - any use of
> g_memdup2 will trigger compile warnings since we're using an
> API that only exists in a glib version newer than our declared
> baseline.
> 
> The inline wrapper  + macro is a trick that lets us backport
> new features, while avoiding the compile warnings.

Ah right, with macro, compiler doesn't see g_memdup2() invocations in code. Thanks!

> 
> This is documented in the include/glib-compat.h file that Philippe
> is modifying.
> 
> Regards,
> Daniel
> 


-- 
Best regards,
Vladimir

Re: [PATCH 02/28] glib-compat: Introduce g_memdup2() wrapper

[Philippe Mathieu-Daudé]

On 9/3/21 1:16 PM, Daniel P. Berrangé wrote:
> On Fri, Sep 03, 2021 at 01:06:36PM +0200, Philippe Mathieu-Daudé wrote:
>> When experimenting raising GLIB_VERSION_MIN_REQUIRED to 2.68
>> (Fedora 34 provides GLib 2.68.1) we get:
>>
>>   hw/virtio/virtio-crypto.c:245:24: error: 'g_memdup' is deprecated: Use 'g_memdup2' instead [-Werror,-Wdeprecated-declarations]
>>   ...
>>
>> g_memdup() has been updated by g_memdup2() to fix eventual security
>> issues (size argument is 32-bit and could be truncated / wrapping).
>> GLib recommends to copy their static inline version of g_memdup2():
>> https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
>>
>> Our glib-compat.h provides a comment explaining how to deal with
>> these deprecated declarations (see commit e71e8cc0355
>> "glib: enforce the minimum required version and warn about old APIs").
>>
>> Following this comment suggestion, implement the g_memdup2_qemu()
>> wrapper to g_memdup2(), and use the safer equivalent inlined when
>> we are using pre-2.68 GLib.
>>
>> Reported-by: Eric Blake <eblake@redhat.com>
>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> ---
>>  include/glib-compat.h | 36 ++++++++++++++++++++++++++++++++++++
>>  1 file changed, 36 insertions(+)
>>
>> diff --git a/include/glib-compat.h b/include/glib-compat.h
>> index 9e95c888f54..6577d9ab393 100644
>> --- a/include/glib-compat.h
>> +++ b/include/glib-compat.h
>> @@ -68,6 +68,42 @@
>>   * without generating warnings.
>>   */
>>  
>> +/*
>> + * g_memdup2_qemu:
>> + * @mem: (nullable): the memory to copy.
>> + * @byte_size: the number of bytes to copy.
>> + *
>> + * Allocates @byte_size bytes of memory, and copies @byte_size bytes into it
>> + * from @mem. If @mem is %NULL it returns %NULL.
>> + *
>> + * This replaces g_memdup(), which was prone to integer overflows when
>> + * converting the argument from a #gsize to a #guint.
>> + *
>> + * This static inline version is a backport of the new public API from
>> + * GLib 2.68, kept internal to GLib for backport to older stable releases.
>> + * See https://gitlab.gnome.org/GNOME/glib/-/issues/2319.
>> + *
>> + * Returns: (nullable): a pointer to the newly-allocated copy of the memory,
>> + *          or %NULL if @mem is %NULL.
>> + */
>> +static inline gpointer g_memdup2_qemu(gconstpointer mem, gsize byte_size)
>> +{
>> +#if GLIB_CHECK_VERSION(2, 68, 0)
>> +    return g_memdup2(mem, byte_size);
>> +#else
>> +    gpointer new_mem;
>> +
>> +    if (mem && byte_size != 0) {
>> +        new_mem = g_malloc(byte_size);
>> +        memcpy(new_mem, mem, byte_size);
>> +    } else {
>> +        new_mem = NULL;
>> +    }
>> +
>> +    return new_mem;
>> +#endif
>> +}
> 
> Close, but you missed the final piece of the puzzle
> 
>    #define g_memdup2(a) g_memdup2_qemu(a)

Doh :/

> Such that in all following patches you can use the normal "g_memdup2"
> API. This means when we later update min glib, we just delete the
> compat code here, and the callers don't need updates.

Painful rebase in perspective...

Re: [PATCH 02/28] glib-compat: Introduce g_memdup2() wrapper

[Philippe Mathieu-Daudé]

On 9/3/21 1:16 PM, Daniel P. Berrangé wrote:
> On Fri, Sep 03, 2021 at 01:06:36PM +0200, Philippe Mathieu-Daudé wrote:
>> When experimenting raising GLIB_VERSION_MIN_REQUIRED to 2.68
>> (Fedora 34 provides GLib 2.68.1) we get:
>>
>>   hw/virtio/virtio-crypto.c:245:24: error: 'g_memdup' is deprecated: Use 'g_memdup2' instead [-Werror,-Wdeprecated-declarations]
>>   ...
>>
>> g_memdup() has been updated by g_memdup2() to fix eventual security
>> issues (size argument is 32-bit and could be truncated / wrapping).
>> GLib recommends to copy their static inline version of g_memdup2():
>> https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
>>
>> Our glib-compat.h provides a comment explaining how to deal with
>> these deprecated declarations (see commit e71e8cc0355
>> "glib: enforce the minimum required version and warn about old APIs").
>>
>> Following this comment suggestion, implement the g_memdup2_qemu()
>> wrapper to g_memdup2(), and use the safer equivalent inlined when
>> we are using pre-2.68 GLib.
>>
>> Reported-by: Eric Blake <eblake@redhat.com>
>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> ---
>>  include/glib-compat.h | 36 ++++++++++++++++++++++++++++++++++++
>>  1 file changed, 36 insertions(+)
>>
>> diff --git a/include/glib-compat.h b/include/glib-compat.h
>> index 9e95c888f54..6577d9ab393 100644
>> --- a/include/glib-compat.h
>> +++ b/include/glib-compat.h
>> @@ -68,6 +68,42 @@
>>   * without generating warnings.
>>   */
>>  
>> +/*
>> + * g_memdup2_qemu:
>> + * @mem: (nullable): the memory to copy.
>> + * @byte_size: the number of bytes to copy.
>> + *
>> + * Allocates @byte_size bytes of memory, and copies @byte_size bytes into it
>> + * from @mem. If @mem is %NULL it returns %NULL.
>> + *
>> + * This replaces g_memdup(), which was prone to integer overflows when
>> + * converting the argument from a #gsize to a #guint.
>> + *
>> + * This static inline version is a backport of the new public API from
>> + * GLib 2.68, kept internal to GLib for backport to older stable releases.
>> + * See https://gitlab.gnome.org/GNOME/glib/-/issues/2319.
>> + *
>> + * Returns: (nullable): a pointer to the newly-allocated copy of the memory,
>> + *          or %NULL if @mem is %NULL.
>> + */
>> +static inline gpointer g_memdup2_qemu(gconstpointer mem, gsize byte_size)
>> +{
>> +#if GLIB_CHECK_VERSION(2, 68, 0)
>> +    return g_memdup2(mem, byte_size);
>> +#else
>> +    gpointer new_mem;
>> +
>> +    if (mem && byte_size != 0) {
>> +        new_mem = g_malloc(byte_size);
>> +        memcpy(new_mem, mem, byte_size);
>> +    } else {
>> +        new_mem = NULL;
>> +    }
>> +
>> +    return new_mem;
>> +#endif
>> +}
> 
> Close, but you missed the final piece of the puzzle
> 
>    #define g_memdup2(a) g_memdup2_qemu(a)

Doh :/

> Such that in all following patches you can use the normal "g_memdup2"
> API. This means when we later update min glib, we just delete the
> compat code here, and the callers don't need updates.

Painful rebase in perspective...

[PATCH 03/28] qapi: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 qapi/qapi-clone-visitor.c | 16 ++++++++--------
 qapi/qapi-visit-core.c    |  6 ++++--
 2 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/qapi/qapi-clone-visitor.c b/qapi/qapi-clone-visitor.c
index c45c5caa3b8..fb38505d982 100644
--- a/qapi/qapi-clone-visitor.c
+++ b/qapi/qapi-clone-visitor.c
@@ -37,7 +37,7 @@ static bool qapi_clone_start_struct(Visitor *v, const char *name, void **obj,
         return true;
     }
 
-    *obj = g_memdup(*obj, size);
+    *obj = g_memdup2_qemu(*obj, size);
     qcv->depth++;
     return true;
 }
@@ -65,8 +65,8 @@ static GenericList *qapi_clone_next_list(Visitor *v, GenericList *tail,
     QapiCloneVisitor *qcv = to_qcv(v);
 
     assert(qcv->depth);
-    /* Unshare the tail of the list cloned by g_memdup() */
-    tail->next = g_memdup(tail->next, size);
+    /* Unshare the tail of the list cloned by g_memdup2() */
+    tail->next = g_memdup2_qemu(tail->next, size);
     return tail->next;
 }
 
@@ -83,7 +83,7 @@ static bool qapi_clone_type_int64(Visitor *v, const char *name, int64_t *obj,
     QapiCloneVisitor *qcv = to_qcv(v);
 
     assert(qcv->depth);
-    /* Value was already cloned by g_memdup() */
+    /* Value was already cloned by g_memdup2() */
     return true;
 }
 
@@ -93,7 +93,7 @@ static bool qapi_clone_type_uint64(Visitor *v, const char *name,
     QapiCloneVisitor *qcv = to_qcv(v);
 
     assert(qcv->depth);
-    /* Value was already cloned by g_memdup() */
+    /* Value was already cloned by g_memdup2() */
     return true;
 }
 
@@ -103,7 +103,7 @@ static bool qapi_clone_type_bool(Visitor *v, const char *name, bool *obj,
     QapiCloneVisitor *qcv = to_qcv(v);
 
     assert(qcv->depth);
-    /* Value was already cloned by g_memdup() */
+    /* Value was already cloned by g_memdup2() */
     return true;
 }
 
@@ -114,7 +114,7 @@ static bool qapi_clone_type_str(Visitor *v, const char *name, char **obj,
 
     assert(qcv->depth);
     /*
-     * Pointer was already cloned by g_memdup; create fresh copy.
+     * Pointer was already cloned by g_memdup2; create fresh copy.
      * Note that as long as qobject-output-visitor accepts NULL instead of
      * "", then we must do likewise. However, we want to obey the
      * input visitor semantics of never producing NULL when the empty
@@ -130,7 +130,7 @@ static bool qapi_clone_type_number(Visitor *v, const char *name, double *obj,
     QapiCloneVisitor *qcv = to_qcv(v);
 
     assert(qcv->depth);
-    /* Value was already cloned by g_memdup() */
+    /* Value was already cloned by g_memdup2() */
     return true;
 }
 
diff --git a/qapi/qapi-visit-core.c b/qapi/qapi-visit-core.c
index a641adec51e..ebabe63b6ea 100644
--- a/qapi/qapi-visit-core.c
+++ b/qapi/qapi-visit-core.c
@@ -413,8 +413,10 @@ bool visit_type_enum(Visitor *v, const char *name, int *obj,
     case VISITOR_OUTPUT:
         return output_type_enum(v, name, obj, lookup, errp);
     case VISITOR_CLONE:
-        /* nothing further to do, scalar value was already copied by
-         * g_memdup() during visit_start_*() */
+        /*
+         * nothing further to do, scalar value was already copied by
+         * g_memdup2() during visit_start_*()
+         */
         return true;
     case VISITOR_DEALLOC:
         /* nothing to deallocate for a scalar */
-- 
2.31.1

[PATCH 03/28] qapi: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 qapi/qapi-clone-visitor.c | 16 ++++++++--------
 qapi/qapi-visit-core.c    |  6 ++++--
 2 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/qapi/qapi-clone-visitor.c b/qapi/qapi-clone-visitor.c
index c45c5caa3b8..fb38505d982 100644
--- a/qapi/qapi-clone-visitor.c
+++ b/qapi/qapi-clone-visitor.c
@@ -37,7 +37,7 @@ static bool qapi_clone_start_struct(Visitor *v, const char *name, void **obj,
         return true;
     }
 
-    *obj = g_memdup(*obj, size);
+    *obj = g_memdup2_qemu(*obj, size);
     qcv->depth++;
     return true;
 }
@@ -65,8 +65,8 @@ static GenericList *qapi_clone_next_list(Visitor *v, GenericList *tail,
     QapiCloneVisitor *qcv = to_qcv(v);
 
     assert(qcv->depth);
-    /* Unshare the tail of the list cloned by g_memdup() */
-    tail->next = g_memdup(tail->next, size);
+    /* Unshare the tail of the list cloned by g_memdup2() */
+    tail->next = g_memdup2_qemu(tail->next, size);
     return tail->next;
 }
 
@@ -83,7 +83,7 @@ static bool qapi_clone_type_int64(Visitor *v, const char *name, int64_t *obj,
     QapiCloneVisitor *qcv = to_qcv(v);
 
     assert(qcv->depth);
-    /* Value was already cloned by g_memdup() */
+    /* Value was already cloned by g_memdup2() */
     return true;
 }
 
@@ -93,7 +93,7 @@ static bool qapi_clone_type_uint64(Visitor *v, const char *name,
     QapiCloneVisitor *qcv = to_qcv(v);
 
     assert(qcv->depth);
-    /* Value was already cloned by g_memdup() */
+    /* Value was already cloned by g_memdup2() */
     return true;
 }
 
@@ -103,7 +103,7 @@ static bool qapi_clone_type_bool(Visitor *v, const char *name, bool *obj,
     QapiCloneVisitor *qcv = to_qcv(v);
 
     assert(qcv->depth);
-    /* Value was already cloned by g_memdup() */
+    /* Value was already cloned by g_memdup2() */
     return true;
 }
 
@@ -114,7 +114,7 @@ static bool qapi_clone_type_str(Visitor *v, const char *name, char **obj,
 
     assert(qcv->depth);
     /*
-     * Pointer was already cloned by g_memdup; create fresh copy.
+     * Pointer was already cloned by g_memdup2; create fresh copy.
      * Note that as long as qobject-output-visitor accepts NULL instead of
      * "", then we must do likewise. However, we want to obey the
      * input visitor semantics of never producing NULL when the empty
@@ -130,7 +130,7 @@ static bool qapi_clone_type_number(Visitor *v, const char *name, double *obj,
     QapiCloneVisitor *qcv = to_qcv(v);
 
     assert(qcv->depth);
-    /* Value was already cloned by g_memdup() */
+    /* Value was already cloned by g_memdup2() */
     return true;
 }
 
diff --git a/qapi/qapi-visit-core.c b/qapi/qapi-visit-core.c
index a641adec51e..ebabe63b6ea 100644
--- a/qapi/qapi-visit-core.c
+++ b/qapi/qapi-visit-core.c
@@ -413,8 +413,10 @@ bool visit_type_enum(Visitor *v, const char *name, int *obj,
     case VISITOR_OUTPUT:
         return output_type_enum(v, name, obj, lookup, errp);
     case VISITOR_CLONE:
-        /* nothing further to do, scalar value was already copied by
-         * g_memdup() during visit_start_*() */
+        /*
+         * nothing further to do, scalar value was already copied by
+         * g_memdup2() during visit_start_*()
+         */
         return true;
     case VISITOR_DEALLOC:
         /* nothing to deallocate for a scalar */
-- 
2.31.1

Re: [PATCH 03/28] qapi: Replace g_memdup() by g_memdup2_qemu()

[Daniel P. Berrangé]

On Fri, Sep 03, 2021 at 01:06:37PM +0200, Philippe Mathieu-Daudé wrote:
> Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
> 
>   The old API took the size of the memory to duplicate as a guint,
>   whereas most memory functions take memory sizes as a gsize. This
>   made it easy to accidentally pass a gsize to g_memdup(). For large
>   values, that would lead to a silent truncation of the size from 64
>   to 32 bits, and result in a heap area being returned which is
>   significantly smaller than what the caller expects. This can likely
>   be exploited in various modules to cause a heap buffer overflow.
> 
> Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

This and all following patches should directly use "g_memdup2"
rather than the wrapper which is supposed to remain "secret"
in the glib-compat.h header.


Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|

Re: [PATCH 03/28] qapi: Replace g_memdup() by g_memdup2_qemu()

[Daniel P. Berrangé]

On Fri, Sep 03, 2021 at 01:06:37PM +0200, Philippe Mathieu-Daudé wrote:
> Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
> 
>   The old API took the size of the memory to duplicate as a guint,
>   whereas most memory functions take memory sizes as a gsize. This
>   made it easy to accidentally pass a gsize to g_memdup(). For large
>   values, that would lead to a silent truncation of the size from 64
>   to 32 bits, and result in a heap area being returned which is
>   significantly smaller than what the caller expects. This can likely
>   be exploited in various modules to cause a heap buffer overflow.
> 
> Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

This and all following patches should directly use "g_memdup2"
rather than the wrapper which is supposed to remain "secret"
in the glib-compat.h header.


Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|

Re: [PATCH 03/28] qapi: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

On 9/3/21 1:18 PM, Daniel P. Berrangé wrote:
> On Fri, Sep 03, 2021 at 01:06:37PM +0200, Philippe Mathieu-Daudé wrote:
>> Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
>>
>>   The old API took the size of the memory to duplicate as a guint,
>>   whereas most memory functions take memory sizes as a gsize. This
>>   made it easy to accidentally pass a gsize to g_memdup(). For large
>>   values, that would lead to a silent truncation of the size from 64
>>   to 32 bits, and result in a heap area being returned which is
>>   significantly smaller than what the caller expects. This can likely
>>   be exploited in various modules to cause a heap buffer overflow.
>>
>> Replace g_memdup() by the safer g_memdup2_qemu() wrapper.
> 
> This and all following patches should directly use "g_memdup2"
> rather than the wrapper which is supposed to remain "secret"
> in the glib-compat.h header.

Yep, got it, thanks for the quick review!

Re: [PATCH 03/28] qapi: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

On 9/3/21 1:18 PM, Daniel P. Berrangé wrote:
> On Fri, Sep 03, 2021 at 01:06:37PM +0200, Philippe Mathieu-Daudé wrote:
>> Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
>>
>>   The old API took the size of the memory to duplicate as a guint,
>>   whereas most memory functions take memory sizes as a gsize. This
>>   made it easy to accidentally pass a gsize to g_memdup(). For large
>>   values, that would lead to a silent truncation of the size from 64
>>   to 32 bits, and result in a heap area being returned which is
>>   significantly smaller than what the caller expects. This can likely
>>   be exploited in various modules to cause a heap buffer overflow.
>>
>> Replace g_memdup() by the safer g_memdup2_qemu() wrapper.
> 
> This and all following patches should directly use "g_memdup2"
> rather than the wrapper which is supposed to remain "secret"
> in the glib-compat.h header.

Yep, got it, thanks for the quick review!

[PATCH 04/28] accel/tcg: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 accel/tcg/cputlb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index b1e5471f949..1d5069a30d1 100644
--- a/accel/tcg/cputlb.c
+++ b/accel/tcg/cputlb.c
@@ -826,7 +826,7 @@ void tlb_flush_range_by_mmuidx(CPUState *cpu, target_ulong addr,
         tlb_flush_range_by_mmuidx_async_0(cpu, d);
     } else {
         /* Otherwise allocate a structure, freed by the worker.  */
-        TLBFlushRangeData *p = g_memdup(&d, sizeof(d));
+        TLBFlushRangeData *p = g_memdup2_qemu(&d, sizeof(d));
         async_run_on_cpu(cpu, tlb_flush_range_by_mmuidx_async_1,
                          RUN_ON_CPU_HOST_PTR(p));
     }
@@ -868,7 +868,7 @@ void tlb_flush_range_by_mmuidx_all_cpus(CPUState *src_cpu,
     /* Allocate a separate data block for each destination cpu.  */
     CPU_FOREACH(dst_cpu) {
         if (dst_cpu != src_cpu) {
-            TLBFlushRangeData *p = g_memdup(&d, sizeof(d));
+            TLBFlushRangeData *p = g_memdup2_qemu(&d, sizeof(d));
             async_run_on_cpu(dst_cpu,
                              tlb_flush_range_by_mmuidx_async_1,
                              RUN_ON_CPU_HOST_PTR(p));
@@ -918,13 +918,13 @@ void tlb_flush_range_by_mmuidx_all_cpus_synced(CPUState *src_cpu,
     /* Allocate a separate data block for each destination cpu.  */
     CPU_FOREACH(dst_cpu) {
         if (dst_cpu != src_cpu) {
-            p = g_memdup(&d, sizeof(d));
+            p = g_memdup2_qemu(&d, sizeof(d));
             async_run_on_cpu(dst_cpu, tlb_flush_range_by_mmuidx_async_1,
                              RUN_ON_CPU_HOST_PTR(p));
         }
     }
 
-    p = g_memdup(&d, sizeof(d));
+    p = g_memdup2_qemu(&d, sizeof(d));
     async_safe_run_on_cpu(src_cpu, tlb_flush_range_by_mmuidx_async_1,
                           RUN_ON_CPU_HOST_PTR(p));
 }
-- 
2.31.1

[PATCH 04/28] accel/tcg: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 accel/tcg/cputlb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index b1e5471f949..1d5069a30d1 100644
--- a/accel/tcg/cputlb.c
+++ b/accel/tcg/cputlb.c
@@ -826,7 +826,7 @@ void tlb_flush_range_by_mmuidx(CPUState *cpu, target_ulong addr,
         tlb_flush_range_by_mmuidx_async_0(cpu, d);
     } else {
         /* Otherwise allocate a structure, freed by the worker.  */
-        TLBFlushRangeData *p = g_memdup(&d, sizeof(d));
+        TLBFlushRangeData *p = g_memdup2_qemu(&d, sizeof(d));
         async_run_on_cpu(cpu, tlb_flush_range_by_mmuidx_async_1,
                          RUN_ON_CPU_HOST_PTR(p));
     }
@@ -868,7 +868,7 @@ void tlb_flush_range_by_mmuidx_all_cpus(CPUState *src_cpu,
     /* Allocate a separate data block for each destination cpu.  */
     CPU_FOREACH(dst_cpu) {
         if (dst_cpu != src_cpu) {
-            TLBFlushRangeData *p = g_memdup(&d, sizeof(d));
+            TLBFlushRangeData *p = g_memdup2_qemu(&d, sizeof(d));
             async_run_on_cpu(dst_cpu,
                              tlb_flush_range_by_mmuidx_async_1,
                              RUN_ON_CPU_HOST_PTR(p));
@@ -918,13 +918,13 @@ void tlb_flush_range_by_mmuidx_all_cpus_synced(CPUState *src_cpu,
     /* Allocate a separate data block for each destination cpu.  */
     CPU_FOREACH(dst_cpu) {
         if (dst_cpu != src_cpu) {
-            p = g_memdup(&d, sizeof(d));
+            p = g_memdup2_qemu(&d, sizeof(d));
             async_run_on_cpu(dst_cpu, tlb_flush_range_by_mmuidx_async_1,
                              RUN_ON_CPU_HOST_PTR(p));
         }
     }
 
-    p = g_memdup(&d, sizeof(d));
+    p = g_memdup2_qemu(&d, sizeof(d));
     async_safe_run_on_cpu(src_cpu, tlb_flush_range_by_mmuidx_async_1,
                           RUN_ON_CPU_HOST_PTR(p));
 }
-- 
2.31.1

[PATCH 05/28] block/qcow2-bitmap: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 block/qcow2-bitmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/qcow2-bitmap.c b/block/qcow2-bitmap.c
index 8fb47315515..ec303acb46b 100644
--- a/block/qcow2-bitmap.c
+++ b/block/qcow2-bitmap.c
@@ -1599,7 +1599,7 @@ bool qcow2_store_persistent_dirty_bitmaps(BlockDriverState *bs,
                            name);
                 goto fail;
             }
-            tb = g_memdup(&bm->table, sizeof(bm->table));
+            tb = g_memdup2_qemu(&bm->table, sizeof(bm->table));
             bm->table.offset = 0;
             bm->table.size = 0;
             QSIMPLEQ_INSERT_TAIL(&drop_tables, tb, entry);
-- 
2.31.1

[PATCH 05/28] block/qcow2-bitmap: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 block/qcow2-bitmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/qcow2-bitmap.c b/block/qcow2-bitmap.c
index 8fb47315515..ec303acb46b 100644
--- a/block/qcow2-bitmap.c
+++ b/block/qcow2-bitmap.c
@@ -1599,7 +1599,7 @@ bool qcow2_store_persistent_dirty_bitmaps(BlockDriverState *bs,
                            name);
                 goto fail;
             }
-            tb = g_memdup(&bm->table, sizeof(bm->table));
+            tb = g_memdup2_qemu(&bm->table, sizeof(bm->table));
             bm->table.offset = 0;
             bm->table.size = 0;
             QSIMPLEQ_INSERT_TAIL(&drop_tables, tb, entry);
-- 
2.31.1

[PATCH 06/28] softmmu: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 softmmu/memory.c | 2 +-
 softmmu/vl.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/softmmu/memory.c b/softmmu/memory.c
index bfedaf9c4df..838a274b627 100644
--- a/softmmu/memory.c
+++ b/softmmu/memory.c
@@ -1140,7 +1140,7 @@ static char *memory_region_escape_name(const char *name)
         bytes += memory_region_need_escape(*p) ? 4 : 1;
     }
     if (bytes == p - name) {
-       return g_memdup(name, bytes + 1);
+        return g_memdup2_qemu(name, bytes + 1);
     }
 
     escaped = g_malloc(bytes + 1);
diff --git a/softmmu/vl.c b/softmmu/vl.c
index ea05bb39c50..a136ef0bfb6 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -1154,7 +1154,7 @@ static int parse_fw_cfg(void *opaque, QemuOpts *opts, Error **errp)
     }
     if (nonempty_str(str)) {
         size = strlen(str); /* NUL terminator NOT included in fw_cfg blob */
-        buf = g_memdup(str, size);
+        buf = g_memdup2_qemu(str, size);
     } else if (nonempty_str(gen_id)) {
         if (!fw_cfg_add_from_generator(fw_cfg, name, gen_id, errp)) {
             return -1;
-- 
2.31.1

[PATCH 06/28] softmmu: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 softmmu/memory.c | 2 +-
 softmmu/vl.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/softmmu/memory.c b/softmmu/memory.c
index bfedaf9c4df..838a274b627 100644
--- a/softmmu/memory.c
+++ b/softmmu/memory.c
@@ -1140,7 +1140,7 @@ static char *memory_region_escape_name(const char *name)
         bytes += memory_region_need_escape(*p) ? 4 : 1;
     }
     if (bytes == p - name) {
-       return g_memdup(name, bytes + 1);
+        return g_memdup2_qemu(name, bytes + 1);
     }
 
     escaped = g_malloc(bytes + 1);
diff --git a/softmmu/vl.c b/softmmu/vl.c
index ea05bb39c50..a136ef0bfb6 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -1154,7 +1154,7 @@ static int parse_fw_cfg(void *opaque, QemuOpts *opts, Error **errp)
     }
     if (nonempty_str(str)) {
         size = strlen(str); /* NUL terminator NOT included in fw_cfg blob */
-        buf = g_memdup(str, size);
+        buf = g_memdup2_qemu(str, size);
     } else if (nonempty_str(gen_id)) {
         if (!fw_cfg_add_from_generator(fw_cfg, name, gen_id, errp)) {
             return -1;
-- 
2.31.1

[PATCH 07/28] hw/9pfs: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/9pfs/9p-synth.c | 2 +-
 hw/9pfs/9p.c       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/9pfs/9p-synth.c b/hw/9pfs/9p-synth.c
index b38088e0664..7d983574af5 100644
--- a/hw/9pfs/9p-synth.c
+++ b/hw/9pfs/9p-synth.c
@@ -497,7 +497,7 @@ static int synth_name_to_path(FsContext *ctx, V9fsPath *dir_path,
 out:
     /* Copy the node pointer to fid */
     g_free(target->data);
-    target->data = g_memdup(&node, sizeof(void *));
+    target->data = g_memdup2_qemu(&node, sizeof(void *));
     target->size = sizeof(void *);
     return 0;
 }
diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c
index 2815257f425..5bf1bd7229f 100644
--- a/hw/9pfs/9p.c
+++ b/hw/9pfs/9p.c
@@ -202,7 +202,7 @@ void v9fs_path_copy(V9fsPath *dst, const V9fsPath *src)
 {
     v9fs_path_free(dst);
     dst->size = src->size;
-    dst->data = g_memdup(src->data, src->size);
+    dst->data = g_memdup2_qemu(src->data, src->size);
 }
 
 int v9fs_name_to_path(V9fsState *s, V9fsPath *dirpath,
-- 
2.31.1

[PATCH 07/28] hw/9pfs: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/9pfs/9p-synth.c | 2 +-
 hw/9pfs/9p.c       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/9pfs/9p-synth.c b/hw/9pfs/9p-synth.c
index b38088e0664..7d983574af5 100644
--- a/hw/9pfs/9p-synth.c
+++ b/hw/9pfs/9p-synth.c
@@ -497,7 +497,7 @@ static int synth_name_to_path(FsContext *ctx, V9fsPath *dir_path,
 out:
     /* Copy the node pointer to fid */
     g_free(target->data);
-    target->data = g_memdup(&node, sizeof(void *));
+    target->data = g_memdup2_qemu(&node, sizeof(void *));
     target->size = sizeof(void *);
     return 0;
 }
diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c
index 2815257f425..5bf1bd7229f 100644
--- a/hw/9pfs/9p.c
+++ b/hw/9pfs/9p.c
@@ -202,7 +202,7 @@ void v9fs_path_copy(V9fsPath *dst, const V9fsPath *src)
 {
     v9fs_path_free(dst);
     dst->size = src->size;
-    dst->data = g_memdup(src->data, src->size);
+    dst->data = g_memdup2_qemu(src->data, src->size);
 }
 
 int v9fs_name_to_path(V9fsState *s, V9fsPath *dirpath,
-- 
2.31.1

[PATCH 08/28] hw/acpi: Avoid truncating acpi_data_len() to 32-bit

[Philippe Mathieu-Daudé]

acpi_data_len() returns an unsigned type, which might be bigger
than 32-bit (although it is unlikely such value is returned).
Hold the returned value in an 'unsigned' type to avoid unlikely
size truncation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/arm/virt-acpi-build.c | 2 +-
 hw/i386/acpi-build.c     | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 037cc1fd82c..95543d43e2a 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -885,7 +885,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 
 static void acpi_ram_update(MemoryRegion *mr, GArray *data)
 {
-    uint32_t size = acpi_data_len(data);
+    unsigned size = acpi_data_len(data);
 
     /* Make sure RAM size is correct - in case it got changed
      * e.g. by migration */
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index a33ac8b91e1..aa269914b49 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2660,7 +2660,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
 
 static void acpi_ram_update(MemoryRegion *mr, GArray *data)
 {
-    uint32_t size = acpi_data_len(data);
+    unsigned size = acpi_data_len(data);
 
     /* Make sure RAM size is correct - in case it got changed e.g. by migration */
     memory_region_ram_resize(mr, size, &error_abort);
@@ -2783,7 +2783,7 @@ void acpi_setup(void)
          * Though RSDP is small, its contents isn't immutable, so
          * we'll update it along with the rest of tables on guest access.
          */
-        uint32_t rsdp_size = acpi_data_len(tables.rsdp);
+        unsigned rsdp_size = acpi_data_len(tables.rsdp);
 
         build_state->rsdp = g_memdup(tables.rsdp->data, rsdp_size);
         fw_cfg_add_file_callback(x86ms->fw_cfg, ACPI_BUILD_RSDP_FILE,
-- 
2.31.1

[PATCH 08/28] hw/acpi: Avoid truncating acpi_data_len() to 32-bit

[Philippe Mathieu-Daudé]

acpi_data_len() returns an unsigned type, which might be bigger
than 32-bit (although it is unlikely such value is returned).
Hold the returned value in an 'unsigned' type to avoid unlikely
size truncation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/arm/virt-acpi-build.c | 2 +-
 hw/i386/acpi-build.c     | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 037cc1fd82c..95543d43e2a 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -885,7 +885,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 
 static void acpi_ram_update(MemoryRegion *mr, GArray *data)
 {
-    uint32_t size = acpi_data_len(data);
+    unsigned size = acpi_data_len(data);
 
     /* Make sure RAM size is correct - in case it got changed
      * e.g. by migration */
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index a33ac8b91e1..aa269914b49 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2660,7 +2660,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
 
 static void acpi_ram_update(MemoryRegion *mr, GArray *data)
 {
-    uint32_t size = acpi_data_len(data);
+    unsigned size = acpi_data_len(data);
 
     /* Make sure RAM size is correct - in case it got changed e.g. by migration */
     memory_region_ram_resize(mr, size, &error_abort);
@@ -2783,7 +2783,7 @@ void acpi_setup(void)
          * Though RSDP is small, its contents isn't immutable, so
          * we'll update it along with the rest of tables on guest access.
          */
-        uint32_t rsdp_size = acpi_data_len(tables.rsdp);
+        unsigned rsdp_size = acpi_data_len(tables.rsdp);
 
         build_state->rsdp = g_memdup(tables.rsdp->data, rsdp_size);
         fw_cfg_add_file_callback(x86ms->fw_cfg, ACPI_BUILD_RSDP_FILE,
-- 
2.31.1

Re: [PATCH 08/28] hw/acpi: Avoid truncating acpi_data_len() to 32-bit

[Igor Mammedov]

On Fri,  3 Sep 2021 13:06:42 +0200
Philippe Mathieu-Daudé <philmd@redhat.com> wrote:

> acpi_data_len() returns an unsigned type, which might be bigger
> than 32-bit (although it is unlikely such value is returned).
> Hold the returned value in an 'unsigned' type to avoid unlikely
> size truncation.
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Acked-by: Igor Mammedov <imammedo@redhat.com>

> ---
>  hw/arm/virt-acpi-build.c | 2 +-
>  hw/i386/acpi-build.c     | 4 ++--
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 037cc1fd82c..95543d43e2a 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -885,7 +885,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>  
>  static void acpi_ram_update(MemoryRegion *mr, GArray *data)
>  {
> -    uint32_t size = acpi_data_len(data);
> +    unsigned size = acpi_data_len(data);
>  
>      /* Make sure RAM size is correct - in case it got changed
>       * e.g. by migration */
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index a33ac8b91e1..aa269914b49 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -2660,7 +2660,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
>  
>  static void acpi_ram_update(MemoryRegion *mr, GArray *data)
>  {
> -    uint32_t size = acpi_data_len(data);
> +    unsigned size = acpi_data_len(data);
>  
>      /* Make sure RAM size is correct - in case it got changed e.g. by migration */
>      memory_region_ram_resize(mr, size, &error_abort);
> @@ -2783,7 +2783,7 @@ void acpi_setup(void)
>           * Though RSDP is small, its contents isn't immutable, so
>           * we'll update it along with the rest of tables on guest access.
>           */
> -        uint32_t rsdp_size = acpi_data_len(tables.rsdp);
> +        unsigned rsdp_size = acpi_data_len(tables.rsdp);
>  
>          build_state->rsdp = g_memdup(tables.rsdp->data, rsdp_size);
>          fw_cfg_add_file_callback(x86ms->fw_cfg, ACPI_BUILD_RSDP_FILE,

Re: [PATCH 08/28] hw/acpi: Avoid truncating acpi_data_len() to 32-bit

[Igor Mammedov]

On Fri,  3 Sep 2021 13:06:42 +0200
Philippe Mathieu-Daudé <philmd@redhat.com> wrote:

> acpi_data_len() returns an unsigned type, which might be bigger
> than 32-bit (although it is unlikely such value is returned).
> Hold the returned value in an 'unsigned' type to avoid unlikely
> size truncation.
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Acked-by: Igor Mammedov <imammedo@redhat.com>

> ---
>  hw/arm/virt-acpi-build.c | 2 +-
>  hw/i386/acpi-build.c     | 4 ++--
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 037cc1fd82c..95543d43e2a 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -885,7 +885,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>  
>  static void acpi_ram_update(MemoryRegion *mr, GArray *data)
>  {
> -    uint32_t size = acpi_data_len(data);
> +    unsigned size = acpi_data_len(data);
>  
>      /* Make sure RAM size is correct - in case it got changed
>       * e.g. by migration */
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index a33ac8b91e1..aa269914b49 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -2660,7 +2660,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
>  
>  static void acpi_ram_update(MemoryRegion *mr, GArray *data)
>  {
> -    uint32_t size = acpi_data_len(data);
> +    unsigned size = acpi_data_len(data);
>  
>      /* Make sure RAM size is correct - in case it got changed e.g. by migration */
>      memory_region_ram_resize(mr, size, &error_abort);
> @@ -2783,7 +2783,7 @@ void acpi_setup(void)
>           * Though RSDP is small, its contents isn't immutable, so
>           * we'll update it along with the rest of tables on guest access.
>           */
> -        uint32_t rsdp_size = acpi_data_len(tables.rsdp);
> +        unsigned rsdp_size = acpi_data_len(tables.rsdp);
>  
>          build_state->rsdp = g_memdup(tables.rsdp->data, rsdp_size);
>          fw_cfg_add_file_callback(x86ms->fw_cfg, ACPI_BUILD_RSDP_FILE,

[PATCH 09/28] hw/acpi: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/acpi/core.c       | 3 ++-
 hw/i386/acpi-build.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/hw/acpi/core.c b/hw/acpi/core.c
index 1e004d0078d..9dd2cf09a0b 100644
--- a/hw/acpi/core.c
+++ b/hw/acpi/core.c
@@ -637,7 +637,8 @@ void acpi_pm1_cnt_init(ACPIREGS *ar, MemoryRegion *parent,
         suspend[3] = 1 | ((!disable_s3) << 7);
         suspend[4] = s4_val | ((!disable_s4) << 7);
 
-        fw_cfg_add_file(fw_cfg, "etc/system-states", g_memdup(suspend, 6), 6);
+        fw_cfg_add_file(fw_cfg, "etc/system-states",
+                        g_memdup2_qemu(suspend, 6), 6);
     }
 }
 
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index aa269914b49..54494ca1f65 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2785,7 +2785,7 @@ void acpi_setup(void)
          */
         unsigned rsdp_size = acpi_data_len(tables.rsdp);
 
-        build_state->rsdp = g_memdup(tables.rsdp->data, rsdp_size);
+        build_state->rsdp = g_memdup2_qemu(tables.rsdp->data, rsdp_size);
         fw_cfg_add_file_callback(x86ms->fw_cfg, ACPI_BUILD_RSDP_FILE,
                                  acpi_build_update, NULL, build_state,
                                  build_state->rsdp, rsdp_size, true);
-- 
2.31.1

[PATCH 09/28] hw/acpi: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/acpi/core.c       | 3 ++-
 hw/i386/acpi-build.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/hw/acpi/core.c b/hw/acpi/core.c
index 1e004d0078d..9dd2cf09a0b 100644
--- a/hw/acpi/core.c
+++ b/hw/acpi/core.c
@@ -637,7 +637,8 @@ void acpi_pm1_cnt_init(ACPIREGS *ar, MemoryRegion *parent,
         suspend[3] = 1 | ((!disable_s3) << 7);
         suspend[4] = s4_val | ((!disable_s4) << 7);
 
-        fw_cfg_add_file(fw_cfg, "etc/system-states", g_memdup(suspend, 6), 6);
+        fw_cfg_add_file(fw_cfg, "etc/system-states",
+                        g_memdup2_qemu(suspend, 6), 6);
     }
 }
 
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index aa269914b49..54494ca1f65 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2785,7 +2785,7 @@ void acpi_setup(void)
          */
         unsigned rsdp_size = acpi_data_len(tables.rsdp);
 
-        build_state->rsdp = g_memdup(tables.rsdp->data, rsdp_size);
+        build_state->rsdp = g_memdup2_qemu(tables.rsdp->data, rsdp_size);
         fw_cfg_add_file_callback(x86ms->fw_cfg, ACPI_BUILD_RSDP_FILE,
                                  acpi_build_update, NULL, build_state,
                                  build_state->rsdp, rsdp_size, true);
-- 
2.31.1

Re: [PATCH 09/28] hw/acpi: Replace g_memdup() by g_memdup2_qemu()

[Igor Mammedov]

On Fri,  3 Sep 2021 13:06:43 +0200
Philippe Mathieu-Daudé <philmd@redhat.com> wrote:

> Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
> 
>   The old API took the size of the memory to duplicate as a guint,
>   whereas most memory functions take memory sizes as a gsize. This
>   made it easy to accidentally pass a gsize to g_memdup(). For large
>   values, that would lead to a silent truncation of the size from 64
>   to 32 bits, and result in a heap area being returned which is
>   significantly smaller than what the caller expects. This can likely
>   be exploited in various modules to cause a heap buffer overflow.
> 
> Replace g_memdup() by the safer g_memdup2_qemu() wrapper.
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Acked-by: Igor Mammedov <imammedo@redhat.com>


> ---
>  hw/acpi/core.c       | 3 ++-
>  hw/i386/acpi-build.c | 2 +-
>  2 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/acpi/core.c b/hw/acpi/core.c
> index 1e004d0078d..9dd2cf09a0b 100644
> --- a/hw/acpi/core.c
> +++ b/hw/acpi/core.c
> @@ -637,7 +637,8 @@ void acpi_pm1_cnt_init(ACPIREGS *ar, MemoryRegion *parent,
>          suspend[3] = 1 | ((!disable_s3) << 7);
>          suspend[4] = s4_val | ((!disable_s4) << 7);
>  
> -        fw_cfg_add_file(fw_cfg, "etc/system-states", g_memdup(suspend, 6), 6);
> +        fw_cfg_add_file(fw_cfg, "etc/system-states",
> +                        g_memdup2_qemu(suspend, 6), 6);
>      }
>  }
>  
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index aa269914b49..54494ca1f65 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -2785,7 +2785,7 @@ void acpi_setup(void)
>           */
>          unsigned rsdp_size = acpi_data_len(tables.rsdp);
>  
> -        build_state->rsdp = g_memdup(tables.rsdp->data, rsdp_size);
> +        build_state->rsdp = g_memdup2_qemu(tables.rsdp->data, rsdp_size);
>          fw_cfg_add_file_callback(x86ms->fw_cfg, ACPI_BUILD_RSDP_FILE,
>                                   acpi_build_update, NULL, build_state,
>                                   build_state->rsdp, rsdp_size, true);

Re: [PATCH 09/28] hw/acpi: Replace g_memdup() by g_memdup2_qemu()

[Igor Mammedov]

On Fri,  3 Sep 2021 13:06:43 +0200
Philippe Mathieu-Daudé <philmd@redhat.com> wrote:

> Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
> 
>   The old API took the size of the memory to duplicate as a guint,
>   whereas most memory functions take memory sizes as a gsize. This
>   made it easy to accidentally pass a gsize to g_memdup(). For large
>   values, that would lead to a silent truncation of the size from 64
>   to 32 bits, and result in a heap area being returned which is
>   significantly smaller than what the caller expects. This can likely
>   be exploited in various modules to cause a heap buffer overflow.
> 
> Replace g_memdup() by the safer g_memdup2_qemu() wrapper.
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Acked-by: Igor Mammedov <imammedo@redhat.com>


> ---
>  hw/acpi/core.c       | 3 ++-
>  hw/i386/acpi-build.c | 2 +-
>  2 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/acpi/core.c b/hw/acpi/core.c
> index 1e004d0078d..9dd2cf09a0b 100644
> --- a/hw/acpi/core.c
> +++ b/hw/acpi/core.c
> @@ -637,7 +637,8 @@ void acpi_pm1_cnt_init(ACPIREGS *ar, MemoryRegion *parent,
>          suspend[3] = 1 | ((!disable_s3) << 7);
>          suspend[4] = s4_val | ((!disable_s4) << 7);
>  
> -        fw_cfg_add_file(fw_cfg, "etc/system-states", g_memdup(suspend, 6), 6);
> +        fw_cfg_add_file(fw_cfg, "etc/system-states",
> +                        g_memdup2_qemu(suspend, 6), 6);
>      }
>  }
>  
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index aa269914b49..54494ca1f65 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -2785,7 +2785,7 @@ void acpi_setup(void)
>           */
>          unsigned rsdp_size = acpi_data_len(tables.rsdp);
>  
> -        build_state->rsdp = g_memdup(tables.rsdp->data, rsdp_size);
> +        build_state->rsdp = g_memdup2_qemu(tables.rsdp->data, rsdp_size);
>          fw_cfg_add_file_callback(x86ms->fw_cfg, ACPI_BUILD_RSDP_FILE,
>                                   acpi_build_update, NULL, build_state,
>                                   build_state->rsdp, rsdp_size, true);

[PATCH 10/28] hw/core/machine: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/core/machine.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/core/machine.c b/hw/core/machine.c
index 067f42b528f..0808a681360 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -615,8 +615,8 @@ HotpluggableCPUList *machine_query_hotpluggable_cpus(MachineState *machine)
 
         cpu_item->type = g_strdup(machine->possible_cpus->cpus[i].type);
         cpu_item->vcpus_count = machine->possible_cpus->cpus[i].vcpus_count;
-        cpu_item->props = g_memdup(&machine->possible_cpus->cpus[i].props,
-                                   sizeof(*cpu_item->props));
+        cpu_item->props = g_memdup2_qemu(&machine->possible_cpus->cpus[i].props,
+                                         sizeof(*cpu_item->props));
 
         cpu = machine->possible_cpus->cpus[i].cpu;
         if (cpu) {
-- 
2.31.1

[PATCH 10/28] hw/core/machine: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/core/machine.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/core/machine.c b/hw/core/machine.c
index 067f42b528f..0808a681360 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -615,8 +615,8 @@ HotpluggableCPUList *machine_query_hotpluggable_cpus(MachineState *machine)
 
         cpu_item->type = g_strdup(machine->possible_cpus->cpus[i].type);
         cpu_item->vcpus_count = machine->possible_cpus->cpus[i].vcpus_count;
-        cpu_item->props = g_memdup(&machine->possible_cpus->cpus[i].props,
-                                   sizeof(*cpu_item->props));
+        cpu_item->props = g_memdup2_qemu(&machine->possible_cpus->cpus[i].props,
+                                         sizeof(*cpu_item->props));
 
         cpu = machine->possible_cpus->cpus[i].cpu;
         if (cpu) {
-- 
2.31.1

[PATCH 11/28] hw/hppa/machine: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/hppa/machine.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 2a46af5bc9b..058a81e85dd 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -101,19 +101,19 @@ static FWCfgState *create_fw_cfg(MachineState *ms)
 
     val = cpu_to_le64(MIN_SEABIOS_HPPA_VERSION);
     fw_cfg_add_file(fw_cfg, "/etc/firmware-min-version",
-                    g_memdup(&val, sizeof(val)), sizeof(val));
+                    g_memdup2_qemu(&val, sizeof(val)), sizeof(val));
 
     val = cpu_to_le64(HPPA_TLB_ENTRIES);
     fw_cfg_add_file(fw_cfg, "/etc/cpu/tlb_entries",
-                    g_memdup(&val, sizeof(val)), sizeof(val));
+                    g_memdup2_qemu(&val, sizeof(val)), sizeof(val));
 
     val = cpu_to_le64(HPPA_BTLB_ENTRIES);
     fw_cfg_add_file(fw_cfg, "/etc/cpu/btlb_entries",
-                    g_memdup(&val, sizeof(val)), sizeof(val));
+                    g_memdup2_qemu(&val, sizeof(val)), sizeof(val));
 
     val = cpu_to_le64(HPA_POWER_BUTTON);
     fw_cfg_add_file(fw_cfg, "/etc/power-button-addr",
-                    g_memdup(&val, sizeof(val)), sizeof(val));
+                    g_memdup2_qemu(&val, sizeof(val)), sizeof(val));
 
     fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ms->boot_order[0]);
     qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
-- 
2.31.1

[PATCH 11/28] hw/hppa/machine: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/hppa/machine.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 2a46af5bc9b..058a81e85dd 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -101,19 +101,19 @@ static FWCfgState *create_fw_cfg(MachineState *ms)
 
     val = cpu_to_le64(MIN_SEABIOS_HPPA_VERSION);
     fw_cfg_add_file(fw_cfg, "/etc/firmware-min-version",
-                    g_memdup(&val, sizeof(val)), sizeof(val));
+                    g_memdup2_qemu(&val, sizeof(val)), sizeof(val));
 
     val = cpu_to_le64(HPPA_TLB_ENTRIES);
     fw_cfg_add_file(fw_cfg, "/etc/cpu/tlb_entries",
-                    g_memdup(&val, sizeof(val)), sizeof(val));
+                    g_memdup2_qemu(&val, sizeof(val)), sizeof(val));
 
     val = cpu_to_le64(HPPA_BTLB_ENTRIES);
     fw_cfg_add_file(fw_cfg, "/etc/cpu/btlb_entries",
-                    g_memdup(&val, sizeof(val)), sizeof(val));
+                    g_memdup2_qemu(&val, sizeof(val)), sizeof(val));
 
     val = cpu_to_le64(HPA_POWER_BUTTON);
     fw_cfg_add_file(fw_cfg, "/etc/power-button-addr",
-                    g_memdup(&val, sizeof(val)), sizeof(val));
+                    g_memdup2_qemu(&val, sizeof(val)), sizeof(val));
 
     fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ms->boot_order[0]);
     qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
-- 
2.31.1

[PATCH 12/28] hw/i386/multiboot: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/i386/multiboot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/i386/multiboot.c b/hw/i386/multiboot.c
index 9e7d69d4705..f536e3c8c96 100644
--- a/hw/i386/multiboot.c
+++ b/hw/i386/multiboot.c
@@ -387,7 +387,7 @@ int load_multiboot(FWCfgState *fw_cfg,
     mb_debug("           mb_mods_count = %d", mbs.mb_mods_count);
 
     /* save bootinfo off the stack */
-    mb_bootinfo_data = g_memdup(bootinfo, sizeof(bootinfo));
+    mb_bootinfo_data = g_memdup2_qemu(bootinfo, sizeof(bootinfo));
 
     /* Pass variables to option rom */
     fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ENTRY, mh_entry_addr);
-- 
2.31.1

[PATCH 12/28] hw/i386/multiboot: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/i386/multiboot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/i386/multiboot.c b/hw/i386/multiboot.c
index 9e7d69d4705..f536e3c8c96 100644
--- a/hw/i386/multiboot.c
+++ b/hw/i386/multiboot.c
@@ -387,7 +387,7 @@ int load_multiboot(FWCfgState *fw_cfg,
     mb_debug("           mb_mods_count = %d", mbs.mb_mods_count);
 
     /* save bootinfo off the stack */
-    mb_bootinfo_data = g_memdup(bootinfo, sizeof(bootinfo));
+    mb_bootinfo_data = g_memdup2_qemu(bootinfo, sizeof(bootinfo));
 
     /* Pass variables to option rom */
     fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ENTRY, mh_entry_addr);
-- 
2.31.1

[PATCH 13/28] hw/net/eepro100: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/net/eepro100.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/net/eepro100.c b/hw/net/eepro100.c
index 16e95ef9cc9..ed2bc54c052 100644
--- a/hw/net/eepro100.c
+++ b/hw/net/eepro100.c
@@ -1872,7 +1872,7 @@ static void e100_nic_realize(PCIDevice *pci_dev, Error **errp)
 
     qemu_register_reset(nic_reset, s);
 
-    s->vmstate = g_memdup(&vmstate_eepro100, sizeof(vmstate_eepro100));
+    s->vmstate = g_memdup2_qemu(&vmstate_eepro100, sizeof(vmstate_eepro100));
     s->vmstate->name = qemu_get_queue(s->nic)->model;
     vmstate_register(VMSTATE_IF(&pci_dev->qdev), VMSTATE_INSTANCE_ID_ANY,
                      s->vmstate, s);
-- 
2.31.1

[PATCH 13/28] hw/net/eepro100: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/net/eepro100.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/net/eepro100.c b/hw/net/eepro100.c
index 16e95ef9cc9..ed2bc54c052 100644
--- a/hw/net/eepro100.c
+++ b/hw/net/eepro100.c
@@ -1872,7 +1872,7 @@ static void e100_nic_realize(PCIDevice *pci_dev, Error **errp)
 
     qemu_register_reset(nic_reset, s);
 
-    s->vmstate = g_memdup(&vmstate_eepro100, sizeof(vmstate_eepro100));
+    s->vmstate = g_memdup2_qemu(&vmstate_eepro100, sizeof(vmstate_eepro100));
     s->vmstate->name = qemu_get_queue(s->nic)->model;
     vmstate_register(VMSTATE_IF(&pci_dev->qdev), VMSTATE_INSTANCE_ID_ANY,
                      s->vmstate, s);
-- 
2.31.1

[PATCH 14/28] hw/nvram/fw_cfg: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/nvram/fw_cfg.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c
index 9b8dcca4ead..fefcdeb8241 100644
--- a/hw/nvram/fw_cfg.c
+++ b/hw/nvram/fw_cfg.c
@@ -205,7 +205,8 @@ static void fw_cfg_bootsplash(FWCfgState *s)
         /* use little endian format */
         bst_le16 = cpu_to_le16(bst_val);
         fw_cfg_add_file(s, "etc/boot-menu-wait",
-                        g_memdup(&bst_le16, sizeof bst_le16), sizeof bst_le16);
+                        g_memdup2_qemu(&bst_le16, sizeof bst_le16),
+                        sizeof bst_le16);
     }
 
     /* insert splash file if user configurated */
@@ -260,7 +261,7 @@ static void fw_cfg_reboot(FWCfgState *s)
     }
 
     rt_le32 = cpu_to_le32(rt_val);
-    fw_cfg_add_file(s, "etc/boot-fail-wait", g_memdup(&rt_le32, 4), 4);
+    fw_cfg_add_file(s, "etc/boot-fail-wait", g_memdup2_qemu(&rt_le32, 4), 4);
 }
 
 static void fw_cfg_write(FWCfgState *s, uint8_t value)
@@ -755,7 +756,7 @@ void fw_cfg_add_string(FWCfgState *s, uint16_t key, const char *value)
     size_t sz = strlen(value) + 1;
 
     trace_fw_cfg_add_string(key, trace_key_name(key), value);
-    fw_cfg_add_bytes(s, key, g_memdup(value, sz), sz);
+    fw_cfg_add_bytes(s, key, g_memdup2_qemu(value, sz), sz);
 }
 
 void fw_cfg_modify_string(FWCfgState *s, uint16_t key, const char *value)
@@ -763,7 +764,7 @@ void fw_cfg_modify_string(FWCfgState *s, uint16_t key, const char *value)
     size_t sz = strlen(value) + 1;
     char *old;
 
-    old = fw_cfg_modify_bytes_read(s, key, g_memdup(value, sz), sz);
+    old = fw_cfg_modify_bytes_read(s, key, g_memdup2_qemu(value, sz), sz);
     g_free(old);
 }
 
-- 
2.31.1

[PATCH 14/28] hw/nvram/fw_cfg: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/nvram/fw_cfg.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c
index 9b8dcca4ead..fefcdeb8241 100644
--- a/hw/nvram/fw_cfg.c
+++ b/hw/nvram/fw_cfg.c
@@ -205,7 +205,8 @@ static void fw_cfg_bootsplash(FWCfgState *s)
         /* use little endian format */
         bst_le16 = cpu_to_le16(bst_val);
         fw_cfg_add_file(s, "etc/boot-menu-wait",
-                        g_memdup(&bst_le16, sizeof bst_le16), sizeof bst_le16);
+                        g_memdup2_qemu(&bst_le16, sizeof bst_le16),
+                        sizeof bst_le16);
     }
 
     /* insert splash file if user configurated */
@@ -260,7 +261,7 @@ static void fw_cfg_reboot(FWCfgState *s)
     }
 
     rt_le32 = cpu_to_le32(rt_val);
-    fw_cfg_add_file(s, "etc/boot-fail-wait", g_memdup(&rt_le32, 4), 4);
+    fw_cfg_add_file(s, "etc/boot-fail-wait", g_memdup2_qemu(&rt_le32, 4), 4);
 }
 
 static void fw_cfg_write(FWCfgState *s, uint8_t value)
@@ -755,7 +756,7 @@ void fw_cfg_add_string(FWCfgState *s, uint16_t key, const char *value)
     size_t sz = strlen(value) + 1;
 
     trace_fw_cfg_add_string(key, trace_key_name(key), value);
-    fw_cfg_add_bytes(s, key, g_memdup(value, sz), sz);
+    fw_cfg_add_bytes(s, key, g_memdup2_qemu(value, sz), sz);
 }
 
 void fw_cfg_modify_string(FWCfgState *s, uint16_t key, const char *value)
@@ -763,7 +764,7 @@ void fw_cfg_modify_string(FWCfgState *s, uint16_t key, const char *value)
     size_t sz = strlen(value) + 1;
     char *old;
 
-    old = fw_cfg_modify_bytes_read(s, key, g_memdup(value, sz), sz);
+    old = fw_cfg_modify_bytes_read(s, key, g_memdup2_qemu(value, sz), sz);
     g_free(old);
 }
 
-- 
2.31.1

[PATCH 15/28] hw/scsi/mptsas: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/scsi/mptsas.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/hw/scsi/mptsas.c b/hw/scsi/mptsas.c
index db3219e7d20..d05735d3e11 100644
--- a/hw/scsi/mptsas.c
+++ b/hw/scsi/mptsas.c
@@ -449,7 +449,8 @@ static void mptsas_process_scsi_task_mgmt(MPTSASState *s, MPIMsgSCSITaskMgmt *re
             } else {
                 MPTSASCancelNotifier *notifier;
 
-                reply_async = g_memdup(&reply, sizeof(MPIMsgSCSITaskMgmtReply));
+                reply_async = g_memdup2_qemu(&reply,
+                                             sizeof(MPIMsgSCSITaskMgmtReply));
                 reply_async->IOCLogInfo = INT_MAX;
 
                 count = 1;
@@ -476,7 +477,7 @@ static void mptsas_process_scsi_task_mgmt(MPTSASState *s, MPIMsgSCSITaskMgmt *re
             goto out;
         }
 
-        reply_async = g_memdup(&reply, sizeof(MPIMsgSCSITaskMgmtReply));
+        reply_async = g_memdup2_qemu(&reply, sizeof(MPIMsgSCSITaskMgmtReply));
         reply_async->IOCLogInfo = INT_MAX;
 
         count = 0;
-- 
2.31.1

[PATCH 15/28] hw/scsi/mptsas: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/scsi/mptsas.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/hw/scsi/mptsas.c b/hw/scsi/mptsas.c
index db3219e7d20..d05735d3e11 100644
--- a/hw/scsi/mptsas.c
+++ b/hw/scsi/mptsas.c
@@ -449,7 +449,8 @@ static void mptsas_process_scsi_task_mgmt(MPTSASState *s, MPIMsgSCSITaskMgmt *re
             } else {
                 MPTSASCancelNotifier *notifier;
 
-                reply_async = g_memdup(&reply, sizeof(MPIMsgSCSITaskMgmtReply));
+                reply_async = g_memdup2_qemu(&reply,
+                                             sizeof(MPIMsgSCSITaskMgmtReply));
                 reply_async->IOCLogInfo = INT_MAX;
 
                 count = 1;
@@ -476,7 +477,7 @@ static void mptsas_process_scsi_task_mgmt(MPTSASState *s, MPIMsgSCSITaskMgmt *re
             goto out;
         }
 
-        reply_async = g_memdup(&reply, sizeof(MPIMsgSCSITaskMgmtReply));
+        reply_async = g_memdup2_qemu(&reply, sizeof(MPIMsgSCSITaskMgmtReply));
         reply_async->IOCLogInfo = INT_MAX;
 
         count = 0;
-- 
2.31.1

[PATCH 16/28] hw/ppc/spapr_pci: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/ppc/spapr_pci.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 7430bd63142..79c0e8d4f98 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -2201,10 +2201,10 @@ static int spapr_pci_post_load(void *opaque, int version_id)
     int i;
 
     for (i = 0; i < sphb->msi_devs_num; ++i) {
-        key = g_memdup(&sphb->msi_devs[i].key,
-                       sizeof(sphb->msi_devs[i].key));
-        value = g_memdup(&sphb->msi_devs[i].value,
-                         sizeof(sphb->msi_devs[i].value));
+        key = g_memdup2_qemu(&sphb->msi_devs[i].key,
+                             sizeof(sphb->msi_devs[i].key));
+        value = g_memdup2_qemu(&sphb->msi_devs[i].value,
+                               sizeof(sphb->msi_devs[i].value));
         g_hash_table_insert(sphb->msi, key, value);
     }
     g_free(sphb->msi_devs);
-- 
2.31.1

[PATCH 16/28] hw/ppc/spapr_pci: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/ppc/spapr_pci.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 7430bd63142..79c0e8d4f98 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -2201,10 +2201,10 @@ static int spapr_pci_post_load(void *opaque, int version_id)
     int i;
 
     for (i = 0; i < sphb->msi_devs_num; ++i) {
-        key = g_memdup(&sphb->msi_devs[i].key,
-                       sizeof(sphb->msi_devs[i].key));
-        value = g_memdup(&sphb->msi_devs[i].value,
-                         sizeof(sphb->msi_devs[i].value));
+        key = g_memdup2_qemu(&sphb->msi_devs[i].key,
+                             sizeof(sphb->msi_devs[i].key));
+        value = g_memdup2_qemu(&sphb->msi_devs[i].value,
+                               sizeof(sphb->msi_devs[i].value));
         g_hash_table_insert(sphb->msi, key, value);
     }
     g_free(sphb->msi_devs);
-- 
2.31.1

Re: [PATCH 16/28] hw/ppc/spapr_pci: Replace g_memdup() by g_memdup2_qemu()

[David Gibson]

[-- Attachment #1: Type: text/plain, Size: 2036 bytes --]

On Fri, Sep 03, 2021 at 01:06:50PM +0200, Philippe Mathieu-Daudé wrote:
> Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
> 
>   The old API took the size of the memory to duplicate as a guint,
>   whereas most memory functions take memory sizes as a gsize. This
>   made it easy to accidentally pass a gsize to g_memdup(). For large
>   values, that would lead to a silent truncation of the size from 64
>   to 32 bits, and result in a heap area being returned which is
>   significantly smaller than what the caller expects. This can likely
>   be exploited in various modules to cause a heap buffer overflow.
> 
> Replace g_memdup() by the safer g_memdup2_qemu() wrapper.
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>


Acked-by: David Gibson <david@gibson.dropbear.id.au>

> ---
>  hw/ppc/spapr_pci.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> index 7430bd63142..79c0e8d4f98 100644
> --- a/hw/ppc/spapr_pci.c
> +++ b/hw/ppc/spapr_pci.c
> @@ -2201,10 +2201,10 @@ static int spapr_pci_post_load(void *opaque, int version_id)
>      int i;
>  
>      for (i = 0; i < sphb->msi_devs_num; ++i) {
> -        key = g_memdup(&sphb->msi_devs[i].key,
> -                       sizeof(sphb->msi_devs[i].key));
> -        value = g_memdup(&sphb->msi_devs[i].value,
> -                         sizeof(sphb->msi_devs[i].value));
> +        key = g_memdup2_qemu(&sphb->msi_devs[i].key,
> +                             sizeof(sphb->msi_devs[i].key));
> +        value = g_memdup2_qemu(&sphb->msi_devs[i].value,
> +                               sizeof(sphb->msi_devs[i].value));
>          g_hash_table_insert(sphb->msi, key, value);
>      }
>      g_free(sphb->msi_devs);

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 16/28] hw/ppc/spapr_pci: Replace g_memdup() by g_memdup2_qemu()

[David Gibson]

[-- Attachment #1: Type: text/plain, Size: 2036 bytes --]

On Fri, Sep 03, 2021 at 01:06:50PM +0200, Philippe Mathieu-Daudé wrote:
> Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
> 
>   The old API took the size of the memory to duplicate as a guint,
>   whereas most memory functions take memory sizes as a gsize. This
>   made it easy to accidentally pass a gsize to g_memdup(). For large
>   values, that would lead to a silent truncation of the size from 64
>   to 32 bits, and result in a heap area being returned which is
>   significantly smaller than what the caller expects. This can likely
>   be exploited in various modules to cause a heap buffer overflow.
> 
> Replace g_memdup() by the safer g_memdup2_qemu() wrapper.
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>


Acked-by: David Gibson <david@gibson.dropbear.id.au>

> ---
>  hw/ppc/spapr_pci.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> index 7430bd63142..79c0e8d4f98 100644
> --- a/hw/ppc/spapr_pci.c
> +++ b/hw/ppc/spapr_pci.c
> @@ -2201,10 +2201,10 @@ static int spapr_pci_post_load(void *opaque, int version_id)
>      int i;
>  
>      for (i = 0; i < sphb->msi_devs_num; ++i) {
> -        key = g_memdup(&sphb->msi_devs[i].key,
> -                       sizeof(sphb->msi_devs[i].key));
> -        value = g_memdup(&sphb->msi_devs[i].value,
> -                         sizeof(sphb->msi_devs[i].value));
> +        key = g_memdup2_qemu(&sphb->msi_devs[i].key,
> +                             sizeof(sphb->msi_devs[i].key));
> +        value = g_memdup2_qemu(&sphb->msi_devs[i].value,
> +                               sizeof(sphb->msi_devs[i].value));
>          g_hash_table_insert(sphb->msi, key, value);
>      }
>      g_free(sphb->msi_devs);

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH 17/28] hw/rdma: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/rdma/rdma_utils.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/rdma/rdma_utils.c b/hw/rdma/rdma_utils.c
index 98df58f6897..9792b1c8ef5 100644
--- a/hw/rdma/rdma_utils.c
+++ b/hw/rdma/rdma_utils.c
@@ -71,7 +71,7 @@ void rdma_protected_gqueue_append_int64(RdmaProtectedGQueue *list,
                                         int64_t value)
 {
     qemu_mutex_lock(&list->lock);
-    g_queue_push_tail(list->list, g_memdup(&value, sizeof(value)));
+    g_queue_push_tail(list->list, g_memdup2_qemu(&value, sizeof(value)));
     qemu_mutex_unlock(&list->lock);
 }
 
-- 
2.31.1

[PATCH 17/28] hw/rdma: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/rdma/rdma_utils.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/rdma/rdma_utils.c b/hw/rdma/rdma_utils.c
index 98df58f6897..9792b1c8ef5 100644
--- a/hw/rdma/rdma_utils.c
+++ b/hw/rdma/rdma_utils.c
@@ -71,7 +71,7 @@ void rdma_protected_gqueue_append_int64(RdmaProtectedGQueue *list,
                                         int64_t value)
 {
     qemu_mutex_lock(&list->lock);
-    g_queue_push_tail(list->list, g_memdup(&value, sizeof(value)));
+    g_queue_push_tail(list->list, g_memdup2_qemu(&value, sizeof(value)));
     qemu_mutex_unlock(&list->lock);
 }
 
-- 
2.31.1

[PATCH 18/28] hw/vfio/pci: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/vfio/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index e1ea1d8a23b..5c9acfd9c40 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -2040,7 +2040,7 @@ static void vfio_add_ext_cap(VFIOPCIDevice *vdev)
      * physical device, we cache the config space to avoid overwriting
      * the original config space when we parse the extended capabilities.
      */
-    config = g_memdup(pdev->config, vdev->config_size);
+    config = g_memdup2_qemu(pdev->config, vdev->config_size);
 
     /*
      * Extended capabilities are chained with each pointing to the next, so we
-- 
2.31.1

[PATCH 18/28] hw/vfio/pci: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/vfio/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index e1ea1d8a23b..5c9acfd9c40 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -2040,7 +2040,7 @@ static void vfio_add_ext_cap(VFIOPCIDevice *vdev)
      * physical device, we cache the config space to avoid overwriting
      * the original config space when we parse the extended capabilities.
      */
-    config = g_memdup(pdev->config, vdev->config_size);
+    config = g_memdup2_qemu(pdev->config, vdev->config_size);
 
     /*
      * Extended capabilities are chained with each pointing to the next, so we
-- 
2.31.1

[RFC PATCH 19/28] hw/virtio: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Should we check in_num/out_num in range?
---
 hw/net/virtio-net.c       | 3 ++-
 hw/virtio/virtio-crypto.c | 7 ++++---
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
index 16d20cdee52..8fa23d5f941 100644
--- a/hw/net/virtio-net.c
+++ b/hw/net/virtio-net.c
@@ -1449,7 +1449,8 @@ static void virtio_net_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
         }
 
         iov_cnt = elem->out_num;
-        iov2 = iov = g_memdup(elem->out_sg, sizeof(struct iovec) * elem->out_num);
+        iov2 = iov = g_memdup2_qemu(elem->out_sg,
+                                    sizeof(struct iovec) * elem->out_num);
         s = iov_to_buf(iov, iov_cnt, 0, &ctrl, sizeof(ctrl));
         iov_discard_front(&iov, &iov_cnt, sizeof(ctrl));
         if (s != sizeof(ctrl)) {
diff --git a/hw/virtio/virtio-crypto.c b/hw/virtio/virtio-crypto.c
index 54f9bbb789c..43c1a39e469 100644
--- a/hw/virtio/virtio-crypto.c
+++ b/hw/virtio/virtio-crypto.c
@@ -242,7 +242,8 @@ static void virtio_crypto_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
         }
 
         out_num = elem->out_num;
-        out_iov_copy = g_memdup(elem->out_sg, sizeof(out_iov[0]) * out_num);
+        out_iov_copy = g_memdup2_qemu(elem->out_sg,
+                                      sizeof(out_iov[0]) * out_num);
         out_iov = out_iov_copy;
 
         in_num = elem->in_num;
@@ -605,11 +606,11 @@ virtio_crypto_handle_request(VirtIOCryptoReq *request)
     }
 
     out_num = elem->out_num;
-    out_iov_copy = g_memdup(elem->out_sg, sizeof(out_iov[0]) * out_num);
+    out_iov_copy = g_memdup2_qemu(elem->out_sg, sizeof(out_iov[0]) * out_num);
     out_iov = out_iov_copy;
 
     in_num = elem->in_num;
-    in_iov_copy = g_memdup(elem->in_sg, sizeof(in_iov[0]) * in_num);
+    in_iov_copy = g_memdup2_qemu(elem->in_sg, sizeof(in_iov[0]) * in_num);
     in_iov = in_iov_copy;
 
     if (unlikely(iov_to_buf(out_iov, out_num, 0, &req, sizeof(req))
-- 
2.31.1

[RFC PATCH 19/28] hw/virtio: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Should we check in_num/out_num in range?
---
 hw/net/virtio-net.c       | 3 ++-
 hw/virtio/virtio-crypto.c | 7 ++++---
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
index 16d20cdee52..8fa23d5f941 100644
--- a/hw/net/virtio-net.c
+++ b/hw/net/virtio-net.c
@@ -1449,7 +1449,8 @@ static void virtio_net_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
         }
 
         iov_cnt = elem->out_num;
-        iov2 = iov = g_memdup(elem->out_sg, sizeof(struct iovec) * elem->out_num);
+        iov2 = iov = g_memdup2_qemu(elem->out_sg,
+                                    sizeof(struct iovec) * elem->out_num);
         s = iov_to_buf(iov, iov_cnt, 0, &ctrl, sizeof(ctrl));
         iov_discard_front(&iov, &iov_cnt, sizeof(ctrl));
         if (s != sizeof(ctrl)) {
diff --git a/hw/virtio/virtio-crypto.c b/hw/virtio/virtio-crypto.c
index 54f9bbb789c..43c1a39e469 100644
--- a/hw/virtio/virtio-crypto.c
+++ b/hw/virtio/virtio-crypto.c
@@ -242,7 +242,8 @@ static void virtio_crypto_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
         }
 
         out_num = elem->out_num;
-        out_iov_copy = g_memdup(elem->out_sg, sizeof(out_iov[0]) * out_num);
+        out_iov_copy = g_memdup2_qemu(elem->out_sg,
+                                      sizeof(out_iov[0]) * out_num);
         out_iov = out_iov_copy;
 
         in_num = elem->in_num;
@@ -605,11 +606,11 @@ virtio_crypto_handle_request(VirtIOCryptoReq *request)
     }
 
     out_num = elem->out_num;
-    out_iov_copy = g_memdup(elem->out_sg, sizeof(out_iov[0]) * out_num);
+    out_iov_copy = g_memdup2_qemu(elem->out_sg, sizeof(out_iov[0]) * out_num);
     out_iov = out_iov_copy;
 
     in_num = elem->in_num;
-    in_iov_copy = g_memdup(elem->in_sg, sizeof(in_iov[0]) * in_num);
+    in_iov_copy = g_memdup2_qemu(elem->in_sg, sizeof(in_iov[0]) * in_num);
     in_iov = in_iov_copy;
 
     if (unlikely(iov_to_buf(out_iov, out_num, 0, &req, sizeof(req))
-- 
2.31.1

[PATCH 20/28] net/colo: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

packet_new() is called from packet_enqueue() with size being 32-bit
(of type SocketReadState::packet_len).

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 net/colo.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/colo.c b/net/colo.c
index 3a3e6e89a0c..cfe37b19eac 100644
--- a/net/colo.c
+++ b/net/colo.c
@@ -159,7 +159,7 @@ Packet *packet_new(const void *data, int size, int vnet_hdr_len)
 {
     Packet *pkt = g_slice_new0(Packet);
 
-    pkt->data = g_memdup(data, size);
+    pkt->data = g_memdup2_qemu(data, size);
     pkt->size = size;
     pkt->creation_ms = qemu_clock_get_ms(QEMU_CLOCK_HOST);
     pkt->vnet_hdr_len = vnet_hdr_len;
@@ -214,7 +214,7 @@ Connection *connection_get(GHashTable *connection_track_table,
     Connection *conn = g_hash_table_lookup(connection_track_table, key);
 
     if (conn == NULL) {
-        ConnectionKey *new_key = g_memdup(key, sizeof(*key));
+        ConnectionKey *new_key = g_memdup2_qemu(key, sizeof(*key));
 
         conn = connection_new(key);
 
-- 
2.31.1

[PATCH 20/28] net/colo: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

packet_new() is called from packet_enqueue() with size being 32-bit
(of type SocketReadState::packet_len).

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 net/colo.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/colo.c b/net/colo.c
index 3a3e6e89a0c..cfe37b19eac 100644
--- a/net/colo.c
+++ b/net/colo.c
@@ -159,7 +159,7 @@ Packet *packet_new(const void *data, int size, int vnet_hdr_len)
 {
     Packet *pkt = g_slice_new0(Packet);
 
-    pkt->data = g_memdup(data, size);
+    pkt->data = g_memdup2_qemu(data, size);
     pkt->size = size;
     pkt->creation_ms = qemu_clock_get_ms(QEMU_CLOCK_HOST);
     pkt->vnet_hdr_len = vnet_hdr_len;
@@ -214,7 +214,7 @@ Connection *connection_get(GHashTable *connection_track_table,
     Connection *conn = g_hash_table_lookup(connection_track_table, key);
 
     if (conn == NULL) {
-        ConnectionKey *new_key = g_memdup(key, sizeof(*key));
+        ConnectionKey *new_key = g_memdup2_qemu(key, sizeof(*key));
 
         conn = connection_new(key);
 
-- 
2.31.1

[RFC PATCH 21/28] ui/clipboard: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
TODO: audit qemu_clipboard_set_data() calls
---
 ui/clipboard.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/ui/clipboard.c b/ui/clipboard.c
index d7b008d62a0..0e12a55d3e5 100644
--- a/ui/clipboard.c
+++ b/ui/clipboard.c
@@ -123,7 +123,7 @@ void qemu_clipboard_set_data(QemuClipboardPeer *peer,
     }
 
     g_free(info->types[type].data);
-    info->types[type].data = g_memdup(data, size);
+    info->types[type].data = g_memdup2_qemu(data, size);
     info->types[type].size = size;
     info->types[type].available = true;
 
-- 
2.31.1

[RFC PATCH 21/28] ui/clipboard: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
TODO: audit qemu_clipboard_set_data() calls
---
 ui/clipboard.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/ui/clipboard.c b/ui/clipboard.c
index d7b008d62a0..0e12a55d3e5 100644
--- a/ui/clipboard.c
+++ b/ui/clipboard.c
@@ -123,7 +123,7 @@ void qemu_clipboard_set_data(QemuClipboardPeer *peer,
     }
 
     g_free(info->types[type].data);
-    info->types[type].data = g_memdup(data, size);
+    info->types[type].data = g_memdup2_qemu(data, size);
     info->types[type].size = size;
     info->types[type].available = true;
 
-- 
2.31.1

[RFC PATCH 22/28] linux-user: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
do_open_by_handle_at() doesn't check:

    size + sizeof(struct file_handle) < 4GiB
---
 linux-user/syscall.c | 2 +-
 linux-user/uaccess.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index ccd3892b2df..e127927f0b9 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -7665,7 +7665,7 @@ static abi_long do_open_by_handle_at(abi_long mount_fd, abi_long handle,
         return -TARGET_EFAULT;
     }
 
-    fh = g_memdup(target_fh, total_size);
+    fh = g_memdup2_qemu(target_fh, total_size);
     fh->handle_bytes = size;
     fh->handle_type = tswap32(target_fh->handle_type);
 
diff --git a/linux-user/uaccess.c b/linux-user/uaccess.c
index 6a5b029607c..80992e2e233 100644
--- a/linux-user/uaccess.c
+++ b/linux-user/uaccess.c
@@ -15,7 +15,7 @@ void *lock_user(int type, abi_ulong guest_addr, ssize_t len, bool copy)
     host_addr = g2h_untagged(guest_addr);
 #ifdef DEBUG_REMAP
     if (copy) {
-        host_addr = g_memdup(host_addr, len);
+        host_addr = g_memdup2_qemu(host_addr, len);
     } else {
         host_addr = g_malloc0(len);
     }
-- 
2.31.1

[RFC PATCH 22/28] linux-user: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
do_open_by_handle_at() doesn't check:

    size + sizeof(struct file_handle) < 4GiB
---
 linux-user/syscall.c | 2 +-
 linux-user/uaccess.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index ccd3892b2df..e127927f0b9 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -7665,7 +7665,7 @@ static abi_long do_open_by_handle_at(abi_long mount_fd, abi_long handle,
         return -TARGET_EFAULT;
     }
 
-    fh = g_memdup(target_fh, total_size);
+    fh = g_memdup2_qemu(target_fh, total_size);
     fh->handle_bytes = size;
     fh->handle_type = tswap32(target_fh->handle_type);
 
diff --git a/linux-user/uaccess.c b/linux-user/uaccess.c
index 6a5b029607c..80992e2e233 100644
--- a/linux-user/uaccess.c
+++ b/linux-user/uaccess.c
@@ -15,7 +15,7 @@ void *lock_user(int type, abi_ulong guest_addr, ssize_t len, bool copy)
     host_addr = g2h_untagged(guest_addr);
 #ifdef DEBUG_REMAP
     if (copy) {
-        host_addr = g_memdup(host_addr, len);
+        host_addr = g_memdup2_qemu(host_addr, len);
     } else {
         host_addr = g_malloc0(len);
     }
-- 
2.31.1

[PATCH 23/28] tests/unit: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 tests/unit/ptimer-test.c | 22 +++++++++++-----------
 tests/unit/test-iov.c    | 26 +++++++++++++-------------
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/tests/unit/ptimer-test.c b/tests/unit/ptimer-test.c
index 9176b96c1ce..23efeb04a57 100644
--- a/tests/unit/ptimer-test.c
+++ b/tests/unit/ptimer-test.c
@@ -798,64 +798,64 @@ static void add_ptimer_tests(uint8_t policy)
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/set_count policy=%s", policy_name),
-        g_memdup(&policy, 1), check_set_count, g_free);
+        g_memdup2_qemu(&policy, 1), check_set_count, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/set_limit policy=%s", policy_name),
-        g_memdup(&policy, 1), check_set_limit, g_free);
+        g_memdup2_qemu(&policy, 1), check_set_limit, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/oneshot policy=%s", policy_name),
-        g_memdup(&policy, 1), check_oneshot, g_free);
+        g_memdup2_qemu(&policy, 1), check_oneshot, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/periodic policy=%s", policy_name),
-        g_memdup(&policy, 1), check_periodic, g_free);
+        g_memdup2_qemu(&policy, 1), check_periodic, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/on_the_fly_mode_change policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_on_the_fly_mode_change, g_free);
+        g_memdup2_qemu(&policy, 1), check_on_the_fly_mode_change, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/on_the_fly_period_change policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_on_the_fly_period_change, g_free);
+        g_memdup2_qemu(&policy, 1), check_on_the_fly_period_change, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/on_the_fly_freq_change policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_on_the_fly_freq_change, g_free);
+        g_memdup2_qemu(&policy, 1), check_on_the_fly_freq_change, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/run_with_period_0 policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_run_with_period_0, g_free);
+        g_memdup2_qemu(&policy, 1), check_run_with_period_0, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/run_with_delta_0 policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_run_with_delta_0, g_free);
+        g_memdup2_qemu(&policy, 1), check_run_with_delta_0, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/periodic_with_load_0 policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_periodic_with_load_0, g_free);
+        g_memdup2_qemu(&policy, 1), check_periodic_with_load_0, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/oneshot_with_load_0 policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_oneshot_with_load_0, g_free);
+        g_memdup2_qemu(&policy, 1), check_oneshot_with_load_0, g_free);
     g_free(tmp);
 }
 
diff --git a/tests/unit/test-iov.c b/tests/unit/test-iov.c
index 5371066fb6a..19ae24adb70 100644
--- a/tests/unit/test-iov.c
+++ b/tests/unit/test-iov.c
@@ -173,7 +173,7 @@ static void test_io(void)
     }
     iov_from_buf(iov, niov, 0, buf, sz);
 
-    siov = g_memdup(iov, sizeof(*iov) * niov);
+    siov = g_memdup2_qemu(iov, sizeof(*iov) * niov);
 
     if (socketpair(PF_UNIX, SOCK_STREAM, 0, sv) < 0) {
        perror("socketpair");
@@ -350,7 +350,7 @@ static void test_discard_front_undo(void)
 
     /* Discard zero bytes */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     iov_discard_front_undoable(&iov_tmp, &iov_cnt_tmp, 0, &undo);
@@ -361,7 +361,7 @@ static void test_discard_front_undo(void)
 
     /* Discard more bytes than vector size */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     size = iov_size(iov, iov_cnt);
@@ -373,7 +373,7 @@ static void test_discard_front_undo(void)
 
     /* Discard entire vector */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     size = iov_size(iov, iov_cnt);
@@ -385,7 +385,7 @@ static void test_discard_front_undo(void)
 
     /* Discard within first element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     size = g_test_rand_int_range(1, iov->iov_len);
@@ -397,7 +397,7 @@ static void test_discard_front_undo(void)
 
     /* Discard entire first element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     iov_discard_front_undoable(&iov_tmp, &iov_cnt_tmp, iov->iov_len, &undo);
@@ -408,7 +408,7 @@ static void test_discard_front_undo(void)
 
     /* Discard within second element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     size = iov->iov_len + g_test_rand_int_range(1, iov[1].iov_len);
@@ -499,7 +499,7 @@ static void test_discard_back_undo(void)
 
     /* Discard zero bytes */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     iov_discard_back_undoable(iov, &iov_cnt_tmp, 0, &undo);
     iov_discard_undo(&undo);
@@ -509,7 +509,7 @@ static void test_discard_back_undo(void)
 
     /* Discard more bytes than vector size */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     size = iov_size(iov, iov_cnt);
     iov_discard_back_undoable(iov, &iov_cnt_tmp, size + 1, &undo);
@@ -520,7 +520,7 @@ static void test_discard_back_undo(void)
 
     /* Discard entire vector */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     size = iov_size(iov, iov_cnt);
     iov_discard_back_undoable(iov, &iov_cnt_tmp, size, &undo);
@@ -531,7 +531,7 @@ static void test_discard_back_undo(void)
 
     /* Discard within last element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     size = g_test_rand_int_range(1, iov[iov_cnt - 1].iov_len);
     iov_discard_back_undoable(iov, &iov_cnt_tmp, size, &undo);
@@ -542,7 +542,7 @@ static void test_discard_back_undo(void)
 
     /* Discard entire last element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     size = iov[iov_cnt - 1].iov_len;
     iov_discard_back_undoable(iov, &iov_cnt_tmp, size, &undo);
@@ -553,7 +553,7 @@ static void test_discard_back_undo(void)
 
     /* Discard within second-to-last element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     size = iov[iov_cnt - 1].iov_len +
            g_test_rand_int_range(1, iov[iov_cnt - 2].iov_len);
-- 
2.31.1

[PATCH 23/28] tests/unit: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 tests/unit/ptimer-test.c | 22 +++++++++++-----------
 tests/unit/test-iov.c    | 26 +++++++++++++-------------
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/tests/unit/ptimer-test.c b/tests/unit/ptimer-test.c
index 9176b96c1ce..23efeb04a57 100644
--- a/tests/unit/ptimer-test.c
+++ b/tests/unit/ptimer-test.c
@@ -798,64 +798,64 @@ static void add_ptimer_tests(uint8_t policy)
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/set_count policy=%s", policy_name),
-        g_memdup(&policy, 1), check_set_count, g_free);
+        g_memdup2_qemu(&policy, 1), check_set_count, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/set_limit policy=%s", policy_name),
-        g_memdup(&policy, 1), check_set_limit, g_free);
+        g_memdup2_qemu(&policy, 1), check_set_limit, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/oneshot policy=%s", policy_name),
-        g_memdup(&policy, 1), check_oneshot, g_free);
+        g_memdup2_qemu(&policy, 1), check_oneshot, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/periodic policy=%s", policy_name),
-        g_memdup(&policy, 1), check_periodic, g_free);
+        g_memdup2_qemu(&policy, 1), check_periodic, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/on_the_fly_mode_change policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_on_the_fly_mode_change, g_free);
+        g_memdup2_qemu(&policy, 1), check_on_the_fly_mode_change, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/on_the_fly_period_change policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_on_the_fly_period_change, g_free);
+        g_memdup2_qemu(&policy, 1), check_on_the_fly_period_change, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/on_the_fly_freq_change policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_on_the_fly_freq_change, g_free);
+        g_memdup2_qemu(&policy, 1), check_on_the_fly_freq_change, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/run_with_period_0 policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_run_with_period_0, g_free);
+        g_memdup2_qemu(&policy, 1), check_run_with_period_0, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/run_with_delta_0 policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_run_with_delta_0, g_free);
+        g_memdup2_qemu(&policy, 1), check_run_with_delta_0, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/periodic_with_load_0 policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_periodic_with_load_0, g_free);
+        g_memdup2_qemu(&policy, 1), check_periodic_with_load_0, g_free);
     g_free(tmp);
 
     g_test_add_data_func_full(
         tmp = g_strdup_printf("/ptimer/oneshot_with_load_0 policy=%s",
                               policy_name),
-        g_memdup(&policy, 1), check_oneshot_with_load_0, g_free);
+        g_memdup2_qemu(&policy, 1), check_oneshot_with_load_0, g_free);
     g_free(tmp);
 }
 
diff --git a/tests/unit/test-iov.c b/tests/unit/test-iov.c
index 5371066fb6a..19ae24adb70 100644
--- a/tests/unit/test-iov.c
+++ b/tests/unit/test-iov.c
@@ -173,7 +173,7 @@ static void test_io(void)
     }
     iov_from_buf(iov, niov, 0, buf, sz);
 
-    siov = g_memdup(iov, sizeof(*iov) * niov);
+    siov = g_memdup2_qemu(iov, sizeof(*iov) * niov);
 
     if (socketpair(PF_UNIX, SOCK_STREAM, 0, sv) < 0) {
        perror("socketpair");
@@ -350,7 +350,7 @@ static void test_discard_front_undo(void)
 
     /* Discard zero bytes */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     iov_discard_front_undoable(&iov_tmp, &iov_cnt_tmp, 0, &undo);
@@ -361,7 +361,7 @@ static void test_discard_front_undo(void)
 
     /* Discard more bytes than vector size */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     size = iov_size(iov, iov_cnt);
@@ -373,7 +373,7 @@ static void test_discard_front_undo(void)
 
     /* Discard entire vector */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     size = iov_size(iov, iov_cnt);
@@ -385,7 +385,7 @@ static void test_discard_front_undo(void)
 
     /* Discard within first element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     size = g_test_rand_int_range(1, iov->iov_len);
@@ -397,7 +397,7 @@ static void test_discard_front_undo(void)
 
     /* Discard entire first element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     iov_discard_front_undoable(&iov_tmp, &iov_cnt_tmp, iov->iov_len, &undo);
@@ -408,7 +408,7 @@ static void test_discard_front_undo(void)
 
     /* Discard within second element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_tmp = iov;
     iov_cnt_tmp = iov_cnt;
     size = iov->iov_len + g_test_rand_int_range(1, iov[1].iov_len);
@@ -499,7 +499,7 @@ static void test_discard_back_undo(void)
 
     /* Discard zero bytes */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     iov_discard_back_undoable(iov, &iov_cnt_tmp, 0, &undo);
     iov_discard_undo(&undo);
@@ -509,7 +509,7 @@ static void test_discard_back_undo(void)
 
     /* Discard more bytes than vector size */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     size = iov_size(iov, iov_cnt);
     iov_discard_back_undoable(iov, &iov_cnt_tmp, size + 1, &undo);
@@ -520,7 +520,7 @@ static void test_discard_back_undo(void)
 
     /* Discard entire vector */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     size = iov_size(iov, iov_cnt);
     iov_discard_back_undoable(iov, &iov_cnt_tmp, size, &undo);
@@ -531,7 +531,7 @@ static void test_discard_back_undo(void)
 
     /* Discard within last element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     size = g_test_rand_int_range(1, iov[iov_cnt - 1].iov_len);
     iov_discard_back_undoable(iov, &iov_cnt_tmp, size, &undo);
@@ -542,7 +542,7 @@ static void test_discard_back_undo(void)
 
     /* Discard entire last element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     size = iov[iov_cnt - 1].iov_len;
     iov_discard_back_undoable(iov, &iov_cnt_tmp, size, &undo);
@@ -553,7 +553,7 @@ static void test_discard_back_undo(void)
 
     /* Discard within second-to-last element */
     iov_random(&iov, &iov_cnt);
-    iov_orig = g_memdup(iov, sizeof(iov[0]) * iov_cnt);
+    iov_orig = g_memdup2_qemu(iov, sizeof(iov[0]) * iov_cnt);
     iov_cnt_tmp = iov_cnt;
     size = iov[iov_cnt - 1].iov_len +
            g_test_rand_int_range(1, iov[iov_cnt - 2].iov_len);
-- 
2.31.1

[PATCH 24/28] tests/qtest: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 tests/qtest/libqos/ahci.c   | 6 +++---
 tests/qtest/libqos/qgraph.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/tests/qtest/libqos/ahci.c b/tests/qtest/libqos/ahci.c
index fba3e7a954e..8ef1bda7c1c 100644
--- a/tests/qtest/libqos/ahci.c
+++ b/tests/qtest/libqos/ahci.c
@@ -639,8 +639,8 @@ void ahci_exec(AHCIQState *ahci, uint8_t port,
     AHCIOpts *opts;
     uint64_t buffer_in;
 
-    opts = g_memdup((opts_in == NULL ? &default_opts : opts_in),
-                    sizeof(AHCIOpts));
+    opts = g_memdup2_qemu((opts_in == NULL ? &default_opts : opts_in),
+                          sizeof(AHCIOpts));
 
     buffer_in = opts->buffer;
 
@@ -860,7 +860,7 @@ AHCICommand *ahci_command_create(uint8_t command_name)
     g_assert(!props->ncq || props->lba48);
 
     /* Defaults and book-keeping */
-    cmd->props = g_memdup(props, sizeof(AHCICommandProp));
+    cmd->props = g_memdup2_qemu(props, sizeof(AHCICommandProp));
     cmd->name = command_name;
     cmd->xbytes = props->size;
     cmd->prd_size = 4096;
diff --git a/tests/qtest/libqos/qgraph.c b/tests/qtest/libqos/qgraph.c
index d1dc4919305..c2e7719bed9 100644
--- a/tests/qtest/libqos/qgraph.c
+++ b/tests/qtest/libqos/qgraph.c
@@ -93,7 +93,7 @@ static void add_edge(const char *source, const char *dest,
     edge->type = type;
     edge->dest = g_strdup(dest);
     edge->edge_name = g_strdup(opts->edge_name ?: dest);
-    edge->arg = g_memdup(opts->arg, opts->size_arg);
+    edge->arg = g_memdup2_qemu(opts->arg, opts->size_arg);
 
     edge->before_cmd_line =
         opts->before_cmd_line ? g_strconcat(" ", opts->before_cmd_line, NULL) : NULL;
-- 
2.31.1

[PATCH 24/28] tests/qtest: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 tests/qtest/libqos/ahci.c   | 6 +++---
 tests/qtest/libqos/qgraph.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/tests/qtest/libqos/ahci.c b/tests/qtest/libqos/ahci.c
index fba3e7a954e..8ef1bda7c1c 100644
--- a/tests/qtest/libqos/ahci.c
+++ b/tests/qtest/libqos/ahci.c
@@ -639,8 +639,8 @@ void ahci_exec(AHCIQState *ahci, uint8_t port,
     AHCIOpts *opts;
     uint64_t buffer_in;
 
-    opts = g_memdup((opts_in == NULL ? &default_opts : opts_in),
-                    sizeof(AHCIOpts));
+    opts = g_memdup2_qemu((opts_in == NULL ? &default_opts : opts_in),
+                          sizeof(AHCIOpts));
 
     buffer_in = opts->buffer;
 
@@ -860,7 +860,7 @@ AHCICommand *ahci_command_create(uint8_t command_name)
     g_assert(!props->ncq || props->lba48);
 
     /* Defaults and book-keeping */
-    cmd->props = g_memdup(props, sizeof(AHCICommandProp));
+    cmd->props = g_memdup2_qemu(props, sizeof(AHCICommandProp));
     cmd->name = command_name;
     cmd->xbytes = props->size;
     cmd->prd_size = 4096;
diff --git a/tests/qtest/libqos/qgraph.c b/tests/qtest/libqos/qgraph.c
index d1dc4919305..c2e7719bed9 100644
--- a/tests/qtest/libqos/qgraph.c
+++ b/tests/qtest/libqos/qgraph.c
@@ -93,7 +93,7 @@ static void add_edge(const char *source, const char *dest,
     edge->type = type;
     edge->dest = g_strdup(dest);
     edge->edge_name = g_strdup(opts->edge_name ?: dest);
-    edge->arg = g_memdup(opts->arg, opts->size_arg);
+    edge->arg = g_memdup2_qemu(opts->arg, opts->size_arg);
 
     edge->before_cmd_line =
         opts->before_cmd_line ? g_strconcat(" ", opts->before_cmd_line, NULL) : NULL;
-- 
2.31.1

[PATCH 25/28] target/arm: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 target/arm/helper.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index a7ae78146d4..f3aeff399b9 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -6242,8 +6242,9 @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu)
 
         /* Create alias before redirection so we dup the right data. */
         if (a->new_key) {
-            ARMCPRegInfo *new_reg = g_memdup(src_reg, sizeof(ARMCPRegInfo));
-            uint32_t *new_key = g_memdup(&a->new_key, sizeof(uint32_t));
+            ARMCPRegInfo *new_reg = g_memdup2_qemu(src_reg,
+                                                   sizeof(ARMCPRegInfo));
+            uint32_t *new_key = g_memdup2_qemu(&a->new_key, sizeof(uint32_t));
             bool ok;
 
             new_reg->name = a->new_name;
@@ -8818,7 +8819,7 @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
      * add a single reginfo struct to the hash table.
      */
     uint32_t *key = g_new(uint32_t, 1);
-    ARMCPRegInfo *r2 = g_memdup(r, sizeof(ARMCPRegInfo));
+    ARMCPRegInfo *r2 = g_memdup2_qemu(r, sizeof(ARMCPRegInfo));
     int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0;
     int ns = (secstate & ARM_CP_SECSTATE_NS) ? 1 : 0;
 
-- 
2.31.1

[PATCH 25/28] target/arm: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 target/arm/helper.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index a7ae78146d4..f3aeff399b9 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -6242,8 +6242,9 @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu)
 
         /* Create alias before redirection so we dup the right data. */
         if (a->new_key) {
-            ARMCPRegInfo *new_reg = g_memdup(src_reg, sizeof(ARMCPRegInfo));
-            uint32_t *new_key = g_memdup(&a->new_key, sizeof(uint32_t));
+            ARMCPRegInfo *new_reg = g_memdup2_qemu(src_reg,
+                                                   sizeof(ARMCPRegInfo));
+            uint32_t *new_key = g_memdup2_qemu(&a->new_key, sizeof(uint32_t));
             bool ok;
 
             new_reg->name = a->new_name;
@@ -8818,7 +8819,7 @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
      * add a single reginfo struct to the hash table.
      */
     uint32_t *key = g_new(uint32_t, 1);
-    ARMCPRegInfo *r2 = g_memdup(r, sizeof(ARMCPRegInfo));
+    ARMCPRegInfo *r2 = g_memdup2_qemu(r, sizeof(ARMCPRegInfo));
     int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0;
     int ns = (secstate & ARM_CP_SECSTATE_NS) ? 1 : 0;
 
-- 
2.31.1

[PATCH 26/28] target/ppc: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 target/ppc/mmu-hash64.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
index 19832c4b46f..2ee6025a406 100644
--- a/target/ppc/mmu-hash64.c
+++ b/target/ppc/mmu-hash64.c
@@ -1122,7 +1122,8 @@ void ppc_hash64_init(PowerPCCPU *cpu)
         return;
     }
 
-    cpu->hash64_opts = g_memdup(pcc->hash64_opts, sizeof(*cpu->hash64_opts));
+    cpu->hash64_opts = g_memdup2_qemu(pcc->hash64_opts,
+                                      sizeof(*cpu->hash64_opts));
 }
 
 void ppc_hash64_finalize(PowerPCCPU *cpu)
-- 
2.31.1

[PATCH 26/28] target/ppc: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 target/ppc/mmu-hash64.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
index 19832c4b46f..2ee6025a406 100644
--- a/target/ppc/mmu-hash64.c
+++ b/target/ppc/mmu-hash64.c
@@ -1122,7 +1122,8 @@ void ppc_hash64_init(PowerPCCPU *cpu)
         return;
     }
 
-    cpu->hash64_opts = g_memdup(pcc->hash64_opts, sizeof(*cpu->hash64_opts));
+    cpu->hash64_opts = g_memdup2_qemu(pcc->hash64_opts,
+                                      sizeof(*cpu->hash64_opts));
 }
 
 void ppc_hash64_finalize(PowerPCCPU *cpu)
-- 
2.31.1

Re: [PATCH 26/28] target/ppc: Replace g_memdup() by g_memdup2_qemu()

[David Gibson]

[-- Attachment #1: Type: text/plain, Size: 1683 bytes --]

On Fri, Sep 03, 2021 at 01:07:00PM +0200, Philippe Mathieu-Daudé wrote:
> Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
> 
>   The old API took the size of the memory to duplicate as a guint,
>   whereas most memory functions take memory sizes as a gsize. This
>   made it easy to accidentally pass a gsize to g_memdup(). For large
>   values, that would lead to a silent truncation of the size from 64
>   to 32 bits, and result in a heap area being returned which is
>   significantly smaller than what the caller expects. This can likely
>   be exploited in various modules to cause a heap buffer overflow.
> 
> Replace g_memdup() by the safer g_memdup2_qemu() wrapper.
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Acked-by: David Gibson <david@gibson.dropbear.id.au>

> ---
>  target/ppc/mmu-hash64.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
> index 19832c4b46f..2ee6025a406 100644
> --- a/target/ppc/mmu-hash64.c
> +++ b/target/ppc/mmu-hash64.c
> @@ -1122,7 +1122,8 @@ void ppc_hash64_init(PowerPCCPU *cpu)
>          return;
>      }
>  
> -    cpu->hash64_opts = g_memdup(pcc->hash64_opts, sizeof(*cpu->hash64_opts));
> +    cpu->hash64_opts = g_memdup2_qemu(pcc->hash64_opts,
> +                                      sizeof(*cpu->hash64_opts));
>  }
>  
>  void ppc_hash64_finalize(PowerPCCPU *cpu)

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 26/28] target/ppc: Replace g_memdup() by g_memdup2_qemu()

[David Gibson]

[-- Attachment #1: Type: text/plain, Size: 1683 bytes --]

On Fri, Sep 03, 2021 at 01:07:00PM +0200, Philippe Mathieu-Daudé wrote:
> Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
> 
>   The old API took the size of the memory to duplicate as a guint,
>   whereas most memory functions take memory sizes as a gsize. This
>   made it easy to accidentally pass a gsize to g_memdup(). For large
>   values, that would lead to a silent truncation of the size from 64
>   to 32 bits, and result in a heap area being returned which is
>   significantly smaller than what the caller expects. This can likely
>   be exploited in various modules to cause a heap buffer overflow.
> 
> Replace g_memdup() by the safer g_memdup2_qemu() wrapper.
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Acked-by: David Gibson <david@gibson.dropbear.id.au>

> ---
>  target/ppc/mmu-hash64.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
> index 19832c4b46f..2ee6025a406 100644
> --- a/target/ppc/mmu-hash64.c
> +++ b/target/ppc/mmu-hash64.c
> @@ -1122,7 +1122,8 @@ void ppc_hash64_init(PowerPCCPU *cpu)
>          return;
>      }
>  
> -    cpu->hash64_opts = g_memdup(pcc->hash64_opts, sizeof(*cpu->hash64_opts));
> +    cpu->hash64_opts = g_memdup2_qemu(pcc->hash64_opts,
> +                                      sizeof(*cpu->hash64_opts));
>  }
>  
>  void ppc_hash64_finalize(PowerPCCPU *cpu)

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH 27/28] contrib: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 contrib/plugins/lockstep.c |  2 +-
 contrib/rdmacm-mux/main.c  | 10 +++++-----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/contrib/plugins/lockstep.c b/contrib/plugins/lockstep.c
index 7fd35eb6692..119a8054b3f 100644
--- a/contrib/plugins/lockstep.c
+++ b/contrib/plugins/lockstep.c
@@ -130,7 +130,7 @@ static void report_divergance(ExecState *us, ExecState *them)
         }
     }
     divergence_log = g_slist_prepend(divergence_log,
-                                     g_memdup(&divrec, sizeof(divrec)));
+                                     g_memdup2_qemu(&divrec, sizeof(divrec)));
 
     /* Output short log entry of going out of sync... */
     if (verbose || divrec.distance == 1 || diverged) {
diff --git a/contrib/rdmacm-mux/main.c b/contrib/rdmacm-mux/main.c
index 771ca01e03f..d447d50f538 100644
--- a/contrib/rdmacm-mux/main.c
+++ b/contrib/rdmacm-mux/main.c
@@ -227,8 +227,8 @@ static RdmaCmMuxErrCode add_fd_ifid_pair(int fd, __be64 gid_ifid)
                            RDMACM_MUX_ERR_CODE_EACCES;
     }
 
-    g_hash_table_insert(server.umad_agent.gid2fd, g_memdup(&gid_ifid,
-                        sizeof(gid_ifid)), g_memdup(&fd, sizeof(fd)));
+    g_hash_table_insert(server.umad_agent.gid2fd, g_memdup2_qemu(&gid_ifid,
+                        sizeof(gid_ifid)), g_memdup2_qemu(&fd, sizeof(fd)));
 
     pthread_rwlock_unlock(&server.lock);
 
@@ -250,7 +250,7 @@ static RdmaCmMuxErrCode delete_fd_ifid_pair(int fd, __be64 gid_ifid)
         return RDMACM_MUX_ERR_CODE_ENOTFOUND;
     }
 
-    g_hash_table_remove(server.umad_agent.gid2fd, g_memdup(&gid_ifid,
+    g_hash_table_remove(server.umad_agent.gid2fd, g_memdup2_qemu(&gid_ifid,
                         sizeof(gid_ifid)));
     pthread_rwlock_unlock(&server.lock);
 
@@ -267,8 +267,8 @@ static void hash_tbl_save_fd_comm_id_pair(int fd, uint32_t comm_id,
 
     pthread_rwlock_wrlock(&server.lock);
     g_hash_table_insert(server.umad_agent.commid2fd,
-                        g_memdup(&comm_id, sizeof(comm_id)),
-                        g_memdup(&fde, sizeof(fde)));
+                        g_memdup2_qemu(&comm_id, sizeof(comm_id)),
+                        g_memdup2_qemu(&fde, sizeof(fde)));
     pthread_rwlock_unlock(&server.lock);
 }
 
-- 
2.31.1

[PATCH 27/28] contrib: Replace g_memdup() by g_memdup2_qemu()

[Philippe Mathieu-Daudé]

Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538

  The old API took the size of the memory to duplicate as a guint,
  whereas most memory functions take memory sizes as a gsize. This
  made it easy to accidentally pass a gsize to g_memdup(). For large
  values, that would lead to a silent truncation of the size from 64
  to 32 bits, and result in a heap area being returned which is
  significantly smaller than what the caller expects. This can likely
  be exploited in various modules to cause a heap buffer overflow.

Replace g_memdup() by the safer g_memdup2_qemu() wrapper.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 contrib/plugins/lockstep.c |  2 +-
 contrib/rdmacm-mux/main.c  | 10 +++++-----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/contrib/plugins/lockstep.c b/contrib/plugins/lockstep.c
index 7fd35eb6692..119a8054b3f 100644
--- a/contrib/plugins/lockstep.c
+++ b/contrib/plugins/lockstep.c
@@ -130,7 +130,7 @@ static void report_divergance(ExecState *us, ExecState *them)
         }
     }
     divergence_log = g_slist_prepend(divergence_log,
-                                     g_memdup(&divrec, sizeof(divrec)));
+                                     g_memdup2_qemu(&divrec, sizeof(divrec)));
 
     /* Output short log entry of going out of sync... */
     if (verbose || divrec.distance == 1 || diverged) {
diff --git a/contrib/rdmacm-mux/main.c b/contrib/rdmacm-mux/main.c
index 771ca01e03f..d447d50f538 100644
--- a/contrib/rdmacm-mux/main.c
+++ b/contrib/rdmacm-mux/main.c
@@ -227,8 +227,8 @@ static RdmaCmMuxErrCode add_fd_ifid_pair(int fd, __be64 gid_ifid)
                            RDMACM_MUX_ERR_CODE_EACCES;
     }
 
-    g_hash_table_insert(server.umad_agent.gid2fd, g_memdup(&gid_ifid,
-                        sizeof(gid_ifid)), g_memdup(&fd, sizeof(fd)));
+    g_hash_table_insert(server.umad_agent.gid2fd, g_memdup2_qemu(&gid_ifid,
+                        sizeof(gid_ifid)), g_memdup2_qemu(&fd, sizeof(fd)));
 
     pthread_rwlock_unlock(&server.lock);
 
@@ -250,7 +250,7 @@ static RdmaCmMuxErrCode delete_fd_ifid_pair(int fd, __be64 gid_ifid)
         return RDMACM_MUX_ERR_CODE_ENOTFOUND;
     }
 
-    g_hash_table_remove(server.umad_agent.gid2fd, g_memdup(&gid_ifid,
+    g_hash_table_remove(server.umad_agent.gid2fd, g_memdup2_qemu(&gid_ifid,
                         sizeof(gid_ifid)));
     pthread_rwlock_unlock(&server.lock);
 
@@ -267,8 +267,8 @@ static void hash_tbl_save_fd_comm_id_pair(int fd, uint32_t comm_id,
 
     pthread_rwlock_wrlock(&server.lock);
     g_hash_table_insert(server.umad_agent.commid2fd,
-                        g_memdup(&comm_id, sizeof(comm_id)),
-                        g_memdup(&fde, sizeof(fde)));
+                        g_memdup2_qemu(&comm_id, sizeof(comm_id)),
+                        g_memdup2_qemu(&fde, sizeof(fde)));
     pthread_rwlock_unlock(&server.lock);
 }
 
-- 
2.31.1

[PATCH 28/28] checkpatch: Do not allow deprecated g_memdup()

[Philippe Mathieu-Daudé]

g_memdup() is insecure and as been deprecated in GLib 2.68.
QEMU provides the safely equivalent g_memdup2_qemu() wrapper.

Do not allow more g_memdup() calls in the repository, provide
a hint to use g_memdup2_qemu().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 scripts/checkpatch.pl | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index cb8eff233e0..4ce9d753492 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2850,6 +2850,11 @@ sub process {
 			WARN("consider using g_path_get_$1() in preference to g_strdup($1())\n" . $herecurr);
 		}
 
+# enforce g_memdup2_qemu() over g_memdup()
+		if ($line =~ /\bg_memdup\s*\(/) {
+			ERROR("use g_memdup2_qemu() instead of unsafe g_memdup()\n" . $herecurr);
+		}
+
 # recommend qemu_strto* over strto* for numeric conversions
 		if ($line =~ /\b(strto[^kd].*?)\s*\(/) {
 			ERROR("consider using qemu_$1 in preference to $1\n" . $herecurr);
-- 
2.31.1

[PATCH 28/28] checkpatch: Do not allow deprecated g_memdup()

[Philippe Mathieu-Daudé]

g_memdup() is insecure and as been deprecated in GLib 2.68.
QEMU provides the safely equivalent g_memdup2_qemu() wrapper.

Do not allow more g_memdup() calls in the repository, provide
a hint to use g_memdup2_qemu().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 scripts/checkpatch.pl | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index cb8eff233e0..4ce9d753492 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2850,6 +2850,11 @@ sub process {
 			WARN("consider using g_path_get_$1() in preference to g_strdup($1())\n" . $herecurr);
 		}
 
+# enforce g_memdup2_qemu() over g_memdup()
+		if ($line =~ /\bg_memdup\s*\(/) {
+			ERROR("use g_memdup2_qemu() instead of unsafe g_memdup()\n" . $herecurr);
+		}
+
 # recommend qemu_strto* over strto* for numeric conversions
 		if ($line =~ /\b(strto[^kd].*?)\s*\(/) {
 			ERROR("consider using qemu_$1 in preference to $1\n" . $herecurr);
-- 
2.31.1