Re: [PATCH] slimbus: qcom-ngd-ctrl: Use platform_get_irq() to get the interrupt

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Fri 24 Dec 08:13 PST 2021, Lad Prabhakar wrote:

> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
> 
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> Hi,
> 
> Dropping usage of platform_get_resource() was agreed based on
> the discussion [0].
> 
> [0] https://patchwork.kernel.org/project/linux-renesas-soc/
> patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
> 
> Cheers,
> Prabhakar
> ---
>  drivers/slimbus/qcom-ngd-ctrl.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
> index 7040293c2ee8..0f29a08b4c09 100644
> --- a/drivers/slimbus/qcom-ngd-ctrl.c
> +++ b/drivers/slimbus/qcom-ngd-ctrl.c
> @@ -1526,13 +1526,11 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
>  	if (IS_ERR(ctrl->base))
>  		return PTR_ERR(ctrl->base);
>  
> -	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (!res) {
> -		dev_err(&pdev->dev, "no slimbus IRQ resource\n");
> -		return -ENODEV;
> -	}
> +	ret = platform_get_irq(pdev, 0);
> +	if (ret < 0)
> +		return ret;
>  
> -	ret = devm_request_irq(dev, res->start, qcom_slim_ngd_interrupt,
> +	ret = devm_request_irq(dev, ret, qcom_slim_ngd_interrupt,
>  			       IRQF_TRIGGER_HIGH, "slim-ngd", ctrl);
>  	if (ret) {
>  		dev_err(&pdev->dev, "request IRQ failed\n");
> -- 
> 2.17.1
>