[PATCHv2 0/3] TI timer changes for am6

[PATCHv2 0/3] TI timer changes for am6

[Tony Lindgren]

Hi,

Here's v2 version of the timer changes for TI am6.

Regards,

Tony

Changes since v1:

- Change the new compatible to ti,am654-timer for the first compatible SoC
  as suggested by Nishanth

- Separate out the binding to convert it to yaml first as suggested by
  Nishanth

- Drop the header ifdefs by moving inline functions to the driver based
  on suggestion by Daniel

Tony Lindgren (3):
  clocksource/drivers/timer-ti-dm: Move inline functions to driver for
    am6
  clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3
  clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCs

 arch/arm/mach-omap2/Kconfig       |   2 +
 drivers/clocksource/Kconfig       |   8 +-
 drivers/clocksource/Makefile      |   2 +-
 drivers/clocksource/timer-ti-dm.c | 123 +++++++++++++++++++++++++
 include/clocksource/timer-ti-dm.h | 144 ------------------------------
 5 files changed, 133 insertions(+), 146 deletions(-)

-- 
2.35.1

[PATCHv2 0/3] TI timer changes for am6

[Tony Lindgren]

Hi,

Here's v2 version of the timer changes for TI am6.

Regards,

Tony

Changes since v1:

- Change the new compatible to ti,am654-timer for the first compatible SoC
  as suggested by Nishanth

- Separate out the binding to convert it to yaml first as suggested by
  Nishanth

- Drop the header ifdefs by moving inline functions to the driver based
  on suggestion by Daniel

Tony Lindgren (3):
  clocksource/drivers/timer-ti-dm: Move inline functions to driver for
    am6
  clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3
  clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCs

 arch/arm/mach-omap2/Kconfig       |   2 +
 drivers/clocksource/Kconfig       |   8 +-
 drivers/clocksource/Makefile      |   2 +-
 drivers/clocksource/timer-ti-dm.c | 123 +++++++++++++++++++++++++
 include/clocksource/timer-ti-dm.h | 144 ------------------------------
 5 files changed, 133 insertions(+), 146 deletions(-)

-- 
2.35.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/3] clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6

[Tony Lindgren]

The __omap_dm_timer_* inline functions in the header are no longer needed
outside the driver, and the header ifdefs prevent the driver working for
ARCH_K3.

Let's move the inline functions to the driver and drop the ifdefs and
drop the unused functions __omap_dm_timer_override_errata() and
__omap_dm_timer_load_start().

Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clocksource/timer-ti-dm.c | 115 ++++++++++++++++++++++++
 include/clocksource/timer-ti-dm.h | 144 ------------------------------
 2 files changed, 115 insertions(+), 144 deletions(-)

diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -44,6 +44,121 @@ enum {
 	REQUEST_BY_NODE,
 };
 
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
+						int posted)
+{
+	if (posted)
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+			cpu_relax();
+
+	return readl_relaxed(timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+					u32 reg, u32 val, int posted)
+{
+	if (posted)
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+			cpu_relax();
+
+	writel_relaxed(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+	u32 tidr;
+
+	/* Assume v1 ip if bits [31:16] are zero */
+	tidr = readl_relaxed(timer->io_base);
+	if (!(tidr >> 16)) {
+		timer->revision = 1;
+		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+		timer->func_base = timer->io_base;
+	} else {
+		timer->revision = 2;
+		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+		timer->pend = timer->io_base +
+			_OMAP_TIMER_WRITE_PEND_OFFSET +
+				OMAP_TIMER_V2_FUNC_OFFSET;
+		timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+	}
+}
+
+/*
+ * __omap_dm_timer_enable_posted - enables write posted mode
+ * @timer:      pointer to timer instance handle
+ *
+ * Enables the write posted mode for the timer. When posted mode is enabled
+ * writes to certain timer registers are immediately acknowledged by the
+ * internal bus and hence prevents stalling the CPU waiting for the write to
+ * complete. Enabling this feature can improve performance for writing to the
+ * timer registers.
+ */
+static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
+{
+	if (timer->posted)
+		return;
+
+	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+		timer->posted = OMAP_TIMER_NONPOSTED;
+		__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
+		return;
+	}
+
+	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
+			      OMAP_TIMER_CTRL_POSTED, 0);
+	timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
+	timer->posted = OMAP_TIMER_POSTED;
+}
+
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+					int posted, unsigned long rate)
+{
+	u32 l;
+
+	l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+	if (l & OMAP_TIMER_CTRL_ST) {
+		l &= ~0x1;
+		__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+		/* Readback to make sure write has completed */
+		__omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+		/*
+		 * Wait for functional clock period x 3.5 to make sure that
+		 * timer is stopped
+		 */
+		udelay(3500000 / rate + 1);
+#endif
+	}
+
+	/* Ack possibly pending interrupt */
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+}
+
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
+						unsigned int value)
+{
+	writel_relaxed(value, timer->irq_ena);
+	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
+{
+	return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
+						unsigned int value)
+{
+	writel_relaxed(value, timer->irq_stat);
+}
+
 /**
  * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
  * @timer:      timer pointer over which read operation to perform
diff --git a/include/clocksource/timer-ti-dm.h b/include/clocksource/timer-ti-dm.h
--- a/include/clocksource/timer-ti-dm.h
+++ b/include/clocksource/timer-ti-dm.h
@@ -247,148 +247,4 @@ int omap_dm_timers_active(void);
 #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
 		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
-/*
- * The below are inlined to optimize code size for system timers. Other code
- * should not need these at all.
- */
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS)
-static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
-						int posted)
-{
-	if (posted)
-		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
-			cpu_relax();
-
-	return readl_relaxed(timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
-					u32 reg, u32 val, int posted)
-{
-	if (posted)
-		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
-			cpu_relax();
-
-	writel_relaxed(val, timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
-{
-	u32 tidr;
-
-	/* Assume v1 ip if bits [31:16] are zero */
-	tidr = readl_relaxed(timer->io_base);
-	if (!(tidr >> 16)) {
-		timer->revision = 1;
-		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
-		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
-		timer->func_base = timer->io_base;
-	} else {
-		timer->revision = 2;
-		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
-		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
-		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
-		timer->pend = timer->io_base +
-			_OMAP_TIMER_WRITE_PEND_OFFSET +
-				OMAP_TIMER_V2_FUNC_OFFSET;
-		timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
-	}
-}
-
-/*
- * __omap_dm_timer_enable_posted - enables write posted mode
- * @timer:      pointer to timer instance handle
- *
- * Enables the write posted mode for the timer. When posted mode is enabled
- * writes to certain timer registers are immediately acknowledged by the
- * internal bus and hence prevents stalling the CPU waiting for the write to
- * complete. Enabling this feature can improve performance for writing to the
- * timer registers.
- */
-static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
-{
-	if (timer->posted)
-		return;
-
-	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
-		timer->posted = OMAP_TIMER_NONPOSTED;
-		__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
-		return;
-	}
-
-	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
-			      OMAP_TIMER_CTRL_POSTED, 0);
-	timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
-	timer->posted = OMAP_TIMER_POSTED;
-}
-
-/**
- * __omap_dm_timer_override_errata - override errata flags for a timer
- * @timer:      pointer to timer handle
- * @errata:	errata flags to be ignored
- *
- * For a given timer, override a timer errata by clearing the flags
- * specified by the errata argument. A specific erratum should only be
- * overridden for a timer if the timer is used in such a way the erratum
- * has no impact.
- */
-static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer,
-						   u32 errata)
-{
-	timer->errata &= ~errata;
-}
-
-static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
-					int posted, unsigned long rate)
-{
-	u32 l;
-
-	l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
-	if (l & OMAP_TIMER_CTRL_ST) {
-		l &= ~0x1;
-		__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
-#ifdef CONFIG_ARCH_OMAP2PLUS
-		/* Readback to make sure write has completed */
-		__omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
-		/*
-		 * Wait for functional clock period x 3.5 to make sure that
-		 * timer is stopped
-		 */
-		udelay(3500000 / rate + 1);
-#endif
-	}
-
-	/* Ack possibly pending interrupt */
-	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
-}
-
-static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
-						u32 ctrl, unsigned int load,
-						int posted)
-{
-	__omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
-	__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
-}
-
-static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
-						unsigned int value)
-{
-	writel_relaxed(value, timer->irq_ena);
-	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
-}
-
-static inline unsigned int
-__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
-{
-	return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
-}
-
-static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
-						unsigned int value)
-{
-	writel_relaxed(value, timer->irq_stat);
-}
-#endif /* CONFIG_ARCH_OMAP1 || CONFIG_ARCH_OMAP2PLUS */
 #endif /* __CLOCKSOURCE_DMTIMER_H */
-- 
2.35.1

[PATCH 1/3] clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6

[Tony Lindgren]

The __omap_dm_timer_* inline functions in the header are no longer needed
outside the driver, and the header ifdefs prevent the driver working for
ARCH_K3.

Let's move the inline functions to the driver and drop the ifdefs and
drop the unused functions __omap_dm_timer_override_errata() and
__omap_dm_timer_load_start().

Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clocksource/timer-ti-dm.c | 115 ++++++++++++++++++++++++
 include/clocksource/timer-ti-dm.h | 144 ------------------------------
 2 files changed, 115 insertions(+), 144 deletions(-)

diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -44,6 +44,121 @@ enum {
 	REQUEST_BY_NODE,
 };
 
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
+						int posted)
+{
+	if (posted)
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+			cpu_relax();
+
+	return readl_relaxed(timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+					u32 reg, u32 val, int posted)
+{
+	if (posted)
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+			cpu_relax();
+
+	writel_relaxed(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+	u32 tidr;
+
+	/* Assume v1 ip if bits [31:16] are zero */
+	tidr = readl_relaxed(timer->io_base);
+	if (!(tidr >> 16)) {
+		timer->revision = 1;
+		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+		timer->func_base = timer->io_base;
+	} else {
+		timer->revision = 2;
+		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+		timer->pend = timer->io_base +
+			_OMAP_TIMER_WRITE_PEND_OFFSET +
+				OMAP_TIMER_V2_FUNC_OFFSET;
+		timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+	}
+}
+
+/*
+ * __omap_dm_timer_enable_posted - enables write posted mode
+ * @timer:      pointer to timer instance handle
+ *
+ * Enables the write posted mode for the timer. When posted mode is enabled
+ * writes to certain timer registers are immediately acknowledged by the
+ * internal bus and hence prevents stalling the CPU waiting for the write to
+ * complete. Enabling this feature can improve performance for writing to the
+ * timer registers.
+ */
+static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
+{
+	if (timer->posted)
+		return;
+
+	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+		timer->posted = OMAP_TIMER_NONPOSTED;
+		__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
+		return;
+	}
+
+	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
+			      OMAP_TIMER_CTRL_POSTED, 0);
+	timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
+	timer->posted = OMAP_TIMER_POSTED;
+}
+
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+					int posted, unsigned long rate)
+{
+	u32 l;
+
+	l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+	if (l & OMAP_TIMER_CTRL_ST) {
+		l &= ~0x1;
+		__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+		/* Readback to make sure write has completed */
+		__omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+		/*
+		 * Wait for functional clock period x 3.5 to make sure that
+		 * timer is stopped
+		 */
+		udelay(3500000 / rate + 1);
+#endif
+	}
+
+	/* Ack possibly pending interrupt */
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+}
+
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
+						unsigned int value)
+{
+	writel_relaxed(value, timer->irq_ena);
+	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
+{
+	return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
+						unsigned int value)
+{
+	writel_relaxed(value, timer->irq_stat);
+}
+
 /**
  * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
  * @timer:      timer pointer over which read operation to perform
diff --git a/include/clocksource/timer-ti-dm.h b/include/clocksource/timer-ti-dm.h
--- a/include/clocksource/timer-ti-dm.h
+++ b/include/clocksource/timer-ti-dm.h
@@ -247,148 +247,4 @@ int omap_dm_timers_active(void);
 #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
 		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
-/*
- * The below are inlined to optimize code size for system timers. Other code
- * should not need these at all.
- */
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS)
-static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
-						int posted)
-{
-	if (posted)
-		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
-			cpu_relax();
-
-	return readl_relaxed(timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
-					u32 reg, u32 val, int posted)
-{
-	if (posted)
-		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
-			cpu_relax();
-
-	writel_relaxed(val, timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
-{
-	u32 tidr;
-
-	/* Assume v1 ip if bits [31:16] are zero */
-	tidr = readl_relaxed(timer->io_base);
-	if (!(tidr >> 16)) {
-		timer->revision = 1;
-		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
-		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
-		timer->func_base = timer->io_base;
-	} else {
-		timer->revision = 2;
-		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
-		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
-		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
-		timer->pend = timer->io_base +
-			_OMAP_TIMER_WRITE_PEND_OFFSET +
-				OMAP_TIMER_V2_FUNC_OFFSET;
-		timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
-	}
-}
-
-/*
- * __omap_dm_timer_enable_posted - enables write posted mode
- * @timer:      pointer to timer instance handle
- *
- * Enables the write posted mode for the timer. When posted mode is enabled
- * writes to certain timer registers are immediately acknowledged by the
- * internal bus and hence prevents stalling the CPU waiting for the write to
- * complete. Enabling this feature can improve performance for writing to the
- * timer registers.
- */
-static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
-{
-	if (timer->posted)
-		return;
-
-	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
-		timer->posted = OMAP_TIMER_NONPOSTED;
-		__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
-		return;
-	}
-
-	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
-			      OMAP_TIMER_CTRL_POSTED, 0);
-	timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
-	timer->posted = OMAP_TIMER_POSTED;
-}
-
-/**
- * __omap_dm_timer_override_errata - override errata flags for a timer
- * @timer:      pointer to timer handle
- * @errata:	errata flags to be ignored
- *
- * For a given timer, override a timer errata by clearing the flags
- * specified by the errata argument. A specific erratum should only be
- * overridden for a timer if the timer is used in such a way the erratum
- * has no impact.
- */
-static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer,
-						   u32 errata)
-{
-	timer->errata &= ~errata;
-}
-
-static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
-					int posted, unsigned long rate)
-{
-	u32 l;
-
-	l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
-	if (l & OMAP_TIMER_CTRL_ST) {
-		l &= ~0x1;
-		__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
-#ifdef CONFIG_ARCH_OMAP2PLUS
-		/* Readback to make sure write has completed */
-		__omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
-		/*
-		 * Wait for functional clock period x 3.5 to make sure that
-		 * timer is stopped
-		 */
-		udelay(3500000 / rate + 1);
-#endif
-	}
-
-	/* Ack possibly pending interrupt */
-	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
-}
-
-static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
-						u32 ctrl, unsigned int load,
-						int posted)
-{
-	__omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
-	__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
-}
-
-static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
-						unsigned int value)
-{
-	writel_relaxed(value, timer->irq_ena);
-	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
-}
-
-static inline unsigned int
-__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
-{
-	return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
-}
-
-static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
-						unsigned int value)
-{
-	writel_relaxed(value, timer->irq_stat);
-}
-#endif /* CONFIG_ARCH_OMAP1 || CONFIG_ARCH_OMAP2PLUS */
 #endif /* __CLOCKSOURCE_DMTIMER_H */
-- 
2.35.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[tip: timers/core] clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6

[tip-bot2 for Tony Lindgren]

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     41e79b1d458477212d0a880c87622bcaa69ab3ea
Gitweb:        https://git.kernel.org/tip/41e79b1d458477212d0a880c87622bcaa69ab3ea
Author:        Tony Lindgren <tony@atomide.com>
AuthorDate:    Fri, 08 Apr 2022 13:17:13 +03:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Wed, 27 Jul 2022 17:00:48 +02:00

clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6

The __omap_dm_timer_* inline functions in the header are no longer needed
outside the driver, and the header ifdefs prevent the driver working for
ARCH_K3.

Let's move the inline functions to the driver and drop the ifdefs and
drop the unused functions __omap_dm_timer_override_errata() and
__omap_dm_timer_load_start().

Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-2-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-ti-dm.c | 115 +++++++++++++++++++++++-
 include/clocksource/timer-ti-dm.h | 144 +-----------------------------
 2 files changed, 115 insertions(+), 144 deletions(-)

diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
index 33609be..530b71f 100644
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -44,6 +44,121 @@ enum {
 	REQUEST_BY_NODE,
 };
 
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
+						int posted)
+{
+	if (posted)
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+			cpu_relax();
+
+	return readl_relaxed(timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+					u32 reg, u32 val, int posted)
+{
+	if (posted)
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+			cpu_relax();
+
+	writel_relaxed(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+	u32 tidr;
+
+	/* Assume v1 ip if bits [31:16] are zero */
+	tidr = readl_relaxed(timer->io_base);
+	if (!(tidr >> 16)) {
+		timer->revision = 1;
+		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+		timer->func_base = timer->io_base;
+	} else {
+		timer->revision = 2;
+		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+		timer->pend = timer->io_base +
+			_OMAP_TIMER_WRITE_PEND_OFFSET +
+				OMAP_TIMER_V2_FUNC_OFFSET;
+		timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+	}
+}
+
+/*
+ * __omap_dm_timer_enable_posted - enables write posted mode
+ * @timer:      pointer to timer instance handle
+ *
+ * Enables the write posted mode for the timer. When posted mode is enabled
+ * writes to certain timer registers are immediately acknowledged by the
+ * internal bus and hence prevents stalling the CPU waiting for the write to
+ * complete. Enabling this feature can improve performance for writing to the
+ * timer registers.
+ */
+static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
+{
+	if (timer->posted)
+		return;
+
+	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+		timer->posted = OMAP_TIMER_NONPOSTED;
+		__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
+		return;
+	}
+
+	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
+			      OMAP_TIMER_CTRL_POSTED, 0);
+	timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
+	timer->posted = OMAP_TIMER_POSTED;
+}
+
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+					int posted, unsigned long rate)
+{
+	u32 l;
+
+	l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+	if (l & OMAP_TIMER_CTRL_ST) {
+		l &= ~0x1;
+		__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+		/* Readback to make sure write has completed */
+		__omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+		/*
+		 * Wait for functional clock period x 3.5 to make sure that
+		 * timer is stopped
+		 */
+		udelay(3500000 / rate + 1);
+#endif
+	}
+
+	/* Ack possibly pending interrupt */
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+}
+
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
+						unsigned int value)
+{
+	writel_relaxed(value, timer->irq_ena);
+	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
+{
+	return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
+						unsigned int value)
+{
+	writel_relaxed(value, timer->irq_stat);
+}
+
 /**
  * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
  * @timer:      timer pointer over which read operation to perform
diff --git a/include/clocksource/timer-ti-dm.h b/include/clocksource/timer-ti-dm.h
index f6da8a1..b0f80cf 100644
--- a/include/clocksource/timer-ti-dm.h
+++ b/include/clocksource/timer-ti-dm.h
@@ -247,148 +247,4 @@ int omap_dm_timers_active(void);
 #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
 		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
-/*
- * The below are inlined to optimize code size for system timers. Other code
- * should not need these at all.
- */
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS)
-static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
-						int posted)
-{
-	if (posted)
-		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
-			cpu_relax();
-
-	return readl_relaxed(timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
-					u32 reg, u32 val, int posted)
-{
-	if (posted)
-		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
-			cpu_relax();
-
-	writel_relaxed(val, timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
-{
-	u32 tidr;
-
-	/* Assume v1 ip if bits [31:16] are zero */
-	tidr = readl_relaxed(timer->io_base);
-	if (!(tidr >> 16)) {
-		timer->revision = 1;
-		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
-		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
-		timer->func_base = timer->io_base;
-	} else {
-		timer->revision = 2;
-		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
-		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
-		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
-		timer->pend = timer->io_base +
-			_OMAP_TIMER_WRITE_PEND_OFFSET +
-				OMAP_TIMER_V2_FUNC_OFFSET;
-		timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
-	}
-}
-
-/*
- * __omap_dm_timer_enable_posted - enables write posted mode
- * @timer:      pointer to timer instance handle
- *
- * Enables the write posted mode for the timer. When posted mode is enabled
- * writes to certain timer registers are immediately acknowledged by the
- * internal bus and hence prevents stalling the CPU waiting for the write to
- * complete. Enabling this feature can improve performance for writing to the
- * timer registers.
- */
-static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
-{
-	if (timer->posted)
-		return;
-
-	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
-		timer->posted = OMAP_TIMER_NONPOSTED;
-		__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
-		return;
-	}
-
-	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
-			      OMAP_TIMER_CTRL_POSTED, 0);
-	timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
-	timer->posted = OMAP_TIMER_POSTED;
-}
-
-/**
- * __omap_dm_timer_override_errata - override errata flags for a timer
- * @timer:      pointer to timer handle
- * @errata:	errata flags to be ignored
- *
- * For a given timer, override a timer errata by clearing the flags
- * specified by the errata argument. A specific erratum should only be
- * overridden for a timer if the timer is used in such a way the erratum
- * has no impact.
- */
-static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer,
-						   u32 errata)
-{
-	timer->errata &= ~errata;
-}
-
-static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
-					int posted, unsigned long rate)
-{
-	u32 l;
-
-	l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
-	if (l & OMAP_TIMER_CTRL_ST) {
-		l &= ~0x1;
-		__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
-#ifdef CONFIG_ARCH_OMAP2PLUS
-		/* Readback to make sure write has completed */
-		__omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
-		/*
-		 * Wait for functional clock period x 3.5 to make sure that
-		 * timer is stopped
-		 */
-		udelay(3500000 / rate + 1);
-#endif
-	}
-
-	/* Ack possibly pending interrupt */
-	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
-}
-
-static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
-						u32 ctrl, unsigned int load,
-						int posted)
-{
-	__omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
-	__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
-}
-
-static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
-						unsigned int value)
-{
-	writel_relaxed(value, timer->irq_ena);
-	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
-}
-
-static inline unsigned int
-__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
-{
-	return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
-}
-
-static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
-						unsigned int value)
-{
-	writel_relaxed(value, timer->irq_stat);
-}
-#endif /* CONFIG_ARCH_OMAP1 || CONFIG_ARCH_OMAP2PLUS */
 #endif /* __CLOCKSOURCE_DMTIMER_H */

[PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[Tony Lindgren]

Let's make timer-ti-dm selectable for ARCH_K3, and add a separate option
for OMAP_DM_SYSTIMER as there should be no need for it on ARCH_K3.

For older TI SoCs, we are already selecting OMAP_DM_TIMER in
arch/arm/mach-omap*/Kconfig. For mach-omap2, we need to now also select
OMAP_DM_SYSTIMER.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig  | 2 ++
 drivers/clocksource/Kconfig  | 8 +++++++-
 drivers/clocksource/Makefile | 2 +-
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -105,6 +105,7 @@ config ARCH_OMAP2PLUS
 	select MACH_OMAP_GENERIC
 	select MEMORY
 	select MFD_SYSCON
+	select OMAP_DM_SYSTIMER
 	select OMAP_DM_TIMER
 	select OMAP_GPMC
 	select PINCTRL
@@ -160,6 +161,7 @@ config SOC_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP2
 	default y
+	select OMAP_DM_SYSTIMER
 	select OMAP_DM_TIMER
 	select SOC_HAS_OMAP2_SDRC
 
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -22,7 +22,7 @@ config CLKEVT_I8253
 config I8253_LOCK
 	bool
 
-config OMAP_DM_TIMER
+config OMAP_DM_SYSTIMER
 	bool
 	select TIMER_OF
 
@@ -56,6 +56,12 @@ config DIGICOLOR_TIMER
 	help
 	  Enables the support for the digicolor timer driver.
 
+config OMAP_DM_TIMER
+	tristate "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST
+	select TIMER_OF
+	help
+	  Enables the support for the TI dual-mode timer driver.
+
 config DW_APB_TIMER
 	bool "DW APB timer driver" if COMPILE_TEST
 	help
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
 obj-$(CONFIG_DAVINCI_TIMER)	+= timer-davinci.o
 obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
 obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm.o
-obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm-systimer.o
+obj-$(CONFIG_OMAP_DM_SYSTIMER)	+= timer-ti-dm-systimer.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o
-- 
2.35.1

[PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[Tony Lindgren]

Let's make timer-ti-dm selectable for ARCH_K3, and add a separate option
for OMAP_DM_SYSTIMER as there should be no need for it on ARCH_K3.

For older TI SoCs, we are already selecting OMAP_DM_TIMER in
arch/arm/mach-omap*/Kconfig. For mach-omap2, we need to now also select
OMAP_DM_SYSTIMER.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig  | 2 ++
 drivers/clocksource/Kconfig  | 8 +++++++-
 drivers/clocksource/Makefile | 2 +-
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -105,6 +105,7 @@ config ARCH_OMAP2PLUS
 	select MACH_OMAP_GENERIC
 	select MEMORY
 	select MFD_SYSCON
+	select OMAP_DM_SYSTIMER
 	select OMAP_DM_TIMER
 	select OMAP_GPMC
 	select PINCTRL
@@ -160,6 +161,7 @@ config SOC_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP2
 	default y
+	select OMAP_DM_SYSTIMER
 	select OMAP_DM_TIMER
 	select SOC_HAS_OMAP2_SDRC
 
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -22,7 +22,7 @@ config CLKEVT_I8253
 config I8253_LOCK
 	bool
 
-config OMAP_DM_TIMER
+config OMAP_DM_SYSTIMER
 	bool
 	select TIMER_OF
 
@@ -56,6 +56,12 @@ config DIGICOLOR_TIMER
 	help
 	  Enables the support for the digicolor timer driver.
 
+config OMAP_DM_TIMER
+	tristate "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST
+	select TIMER_OF
+	help
+	  Enables the support for the TI dual-mode timer driver.
+
 config DW_APB_TIMER
 	bool "DW APB timer driver" if COMPILE_TEST
 	help
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
 obj-$(CONFIG_DAVINCI_TIMER)	+= timer-davinci.o
 obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
 obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm.o
-obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm-systimer.o
+obj-$(CONFIG_OMAP_DM_SYSTIMER)	+= timer-ti-dm-systimer.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o
-- 
2.35.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[Daniel Lezcano]

On 08/04/2022 12:17, Tony Lindgren wrote:
> Let's make timer-ti-dm selectable for ARCH_K3, and add a separate option
> for OMAP_DM_SYSTIMER as there should be no need for it on ARCH_K3.
> 
> For older TI SoCs, we are already selecting OMAP_DM_TIMER in
> arch/arm/mach-omap*/Kconfig. For mach-omap2, we need to now also select
> OMAP_DM_SYSTIMER.
> 
> Cc: Keerthy <j-keerthy@ti.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Vignesh Raghavendra <vigneshr@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>   arch/arm/mach-omap2/Kconfig  | 2 ++
>   drivers/clocksource/Kconfig  | 8 +++++++-
>   drivers/clocksource/Makefile | 2 +-
>   3 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -105,6 +105,7 @@ config ARCH_OMAP2PLUS
>   	select MACH_OMAP_GENERIC
>   	select MEMORY
>   	select MFD_SYSCON
> +	select OMAP_DM_SYSTIMER
>   	select OMAP_DM_TIMER
>   	select OMAP_GPMC
>   	select PINCTRL
> @@ -160,6 +161,7 @@ config SOC_OMAP2420
>   	bool "OMAP2420 support"
>   	depends on ARCH_OMAP2
>   	default y
> +	select OMAP_DM_SYSTIMER
>   	select OMAP_DM_TIMER
>   	select SOC_HAS_OMAP2_SDRC
>   
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -22,7 +22,7 @@ config CLKEVT_I8253
>   config I8253_LOCK
>   	bool
>   
> -config OMAP_DM_TIMER
> +config OMAP_DM_SYSTIMER
>   	bool
>   	select TIMER_OF
>   
> @@ -56,6 +56,12 @@ config DIGICOLOR_TIMER
>   	help
>   	  Enables the support for the digicolor timer driver.
>   
> +config OMAP_DM_TIMER
> +	tristate "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST

Actually, I missed this. Could you convert to a 'bool' there is no 
module in the timer drivers ATM.



> +	select TIMER_OF
> +	help
> +	  Enables the support for the TI dual-mode timer driver.
> +
>   config DW_APB_TIMER
>   	bool "DW APB timer driver" if COMPILE_TEST
>   	help
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -18,7 +18,7 @@ obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
>   obj-$(CONFIG_DAVINCI_TIMER)	+= timer-davinci.o
>   obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
>   obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm.o
> -obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm-systimer.o
> +obj-$(CONFIG_OMAP_DM_SYSTIMER)	+= timer-ti-dm-systimer.o
>   obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
>   obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
>   obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[Daniel Lezcano]

On 08/04/2022 12:17, Tony Lindgren wrote:
> Let's make timer-ti-dm selectable for ARCH_K3, and add a separate option
> for OMAP_DM_SYSTIMER as there should be no need for it on ARCH_K3.
> 
> For older TI SoCs, we are already selecting OMAP_DM_TIMER in
> arch/arm/mach-omap*/Kconfig. For mach-omap2, we need to now also select
> OMAP_DM_SYSTIMER.
> 
> Cc: Keerthy <j-keerthy@ti.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Vignesh Raghavendra <vigneshr@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>   arch/arm/mach-omap2/Kconfig  | 2 ++
>   drivers/clocksource/Kconfig  | 8 +++++++-
>   drivers/clocksource/Makefile | 2 +-
>   3 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -105,6 +105,7 @@ config ARCH_OMAP2PLUS
>   	select MACH_OMAP_GENERIC
>   	select MEMORY
>   	select MFD_SYSCON
> +	select OMAP_DM_SYSTIMER
>   	select OMAP_DM_TIMER
>   	select OMAP_GPMC
>   	select PINCTRL
> @@ -160,6 +161,7 @@ config SOC_OMAP2420
>   	bool "OMAP2420 support"
>   	depends on ARCH_OMAP2
>   	default y
> +	select OMAP_DM_SYSTIMER
>   	select OMAP_DM_TIMER
>   	select SOC_HAS_OMAP2_SDRC
>   
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -22,7 +22,7 @@ config CLKEVT_I8253
>   config I8253_LOCK
>   	bool
>   
> -config OMAP_DM_TIMER
> +config OMAP_DM_SYSTIMER
>   	bool
>   	select TIMER_OF
>   
> @@ -56,6 +56,12 @@ config DIGICOLOR_TIMER
>   	help
>   	  Enables the support for the digicolor timer driver.
>   
> +config OMAP_DM_TIMER
> +	tristate "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST

Actually, I missed this. Could you convert to a 'bool' there is no 
module in the timer drivers ATM.



> +	select TIMER_OF
> +	help
> +	  Enables the support for the TI dual-mode timer driver.
> +
>   config DW_APB_TIMER
>   	bool "DW APB timer driver" if COMPILE_TEST
>   	help
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -18,7 +18,7 @@ obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
>   obj-$(CONFIG_DAVINCI_TIMER)	+= timer-davinci.o
>   obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
>   obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm.o
> -obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm-systimer.o
> +obj-$(CONFIG_OMAP_DM_SYSTIMER)	+= timer-ti-dm-systimer.o
>   obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
>   obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
>   obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[Tony Lindgren]

Hi,

* Daniel Lezcano <daniel.lezcano@linaro.org> [220520 15:24]:
> On 08/04/2022 12:17, Tony Lindgren wrote:
> > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> > --- a/drivers/clocksource/Kconfig
> > +++ b/drivers/clocksource/Kconfig
> > @@ -22,7 +22,7 @@ config CLKEVT_I8253
> >   config I8253_LOCK
> >   	bool
> > -config OMAP_DM_TIMER
> > +config OMAP_DM_SYSTIMER
> >   	bool
> >   	select TIMER_OF
> > @@ -56,6 +56,12 @@ config DIGICOLOR_TIMER
> >   	help
> >   	  Enables the support for the digicolor timer driver.
> > +config OMAP_DM_TIMER
> > +	tristate "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST
> 
> Actually, I missed this. Could you convert to a 'bool' there is no module in
> the timer drivers ATM.

OK sure will do.

Did you notice some loadable module usage issues for timers that are not
system timers? Just wondering if there are some issues that I did not
notice.

Regards,

Tony

Re: [PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[Tony Lindgren]

Hi,

* Daniel Lezcano <daniel.lezcano@linaro.org> [220520 15:24]:
> On 08/04/2022 12:17, Tony Lindgren wrote:
> > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> > --- a/drivers/clocksource/Kconfig
> > +++ b/drivers/clocksource/Kconfig
> > @@ -22,7 +22,7 @@ config CLKEVT_I8253
> >   config I8253_LOCK
> >   	bool
> > -config OMAP_DM_TIMER
> > +config OMAP_DM_SYSTIMER
> >   	bool
> >   	select TIMER_OF
> > @@ -56,6 +56,12 @@ config DIGICOLOR_TIMER
> >   	help
> >   	  Enables the support for the digicolor timer driver.
> > +config OMAP_DM_TIMER
> > +	tristate "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST
> 
> Actually, I missed this. Could you convert to a 'bool' there is no module in
> the timer drivers ATM.

OK sure will do.

Did you notice some loadable module usage issues for timers that are not
system timers? Just wondering if there are some issues that I did not
notice.

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[Daniel Lezcano]

Hi Tony,

On 23/05/2022 09:13, Tony Lindgren wrote:
> Hi,
> 
> * Daniel Lezcano <daniel.lezcano@linaro.org> [220520 15:24]:
>> On 08/04/2022 12:17, Tony Lindgren wrote:
>>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>>> --- a/drivers/clocksource/Kconfig
>>> +++ b/drivers/clocksource/Kconfig
>>> @@ -22,7 +22,7 @@ config CLKEVT_I8253
>>>    config I8253_LOCK
>>>    	bool
>>> -config OMAP_DM_TIMER
>>> +config OMAP_DM_SYSTIMER
>>>    	bool
>>>    	select TIMER_OF
>>> @@ -56,6 +56,12 @@ config DIGICOLOR_TIMER
>>>    	help
>>>    	  Enables the support for the digicolor timer driver.
>>> +config OMAP_DM_TIMER
>>> +	tristate "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST
>>
>> Actually, I missed this. Could you convert to a 'bool' there is no module in
>> the timer drivers ATM.
> 
> OK sure will do.
> 
> Did you notice some loadable module usage issues for timers that are not
> system timers? Just wondering if there are some issues that I did not
> notice.

I think the removal won't be supported. We already had a proposal to 
move one of the timer as a module but I wanted to have more insights 
about the changes, not just do that because of a GKI Android.



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[Daniel Lezcano]

Hi Tony,

On 23/05/2022 09:13, Tony Lindgren wrote:
> Hi,
> 
> * Daniel Lezcano <daniel.lezcano@linaro.org> [220520 15:24]:
>> On 08/04/2022 12:17, Tony Lindgren wrote:
>>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>>> --- a/drivers/clocksource/Kconfig
>>> +++ b/drivers/clocksource/Kconfig
>>> @@ -22,7 +22,7 @@ config CLKEVT_I8253
>>>    config I8253_LOCK
>>>    	bool
>>> -config OMAP_DM_TIMER
>>> +config OMAP_DM_SYSTIMER
>>>    	bool
>>>    	select TIMER_OF
>>> @@ -56,6 +56,12 @@ config DIGICOLOR_TIMER
>>>    	help
>>>    	  Enables the support for the digicolor timer driver.
>>> +config OMAP_DM_TIMER
>>> +	tristate "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST
>>
>> Actually, I missed this. Could you convert to a 'bool' there is no module in
>> the timer drivers ATM.
> 
> OK sure will do.
> 
> Did you notice some loadable module usage issues for timers that are not
> system timers? Just wondering if there are some issues that I did not
> notice.

I think the removal won't be supported. We already had a proposal to 
move one of the timer as a module but I wanted to have more insights 
about the changes, not just do that because of a GKI Android.



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[Tony Lindgren]

* Daniel Lezcano <daniel.lezcano@linaro.org> [220523 12:37]:
> On 23/05/2022 09:13, Tony Lindgren wrote:
> > Did you notice some loadable module usage issues for timers that are not
> > system timers? Just wondering if there are some issues that I did not
> > notice.
> 
> I think the removal won't be supported. We already had a proposal to move
> one of the timer as a module but I wanted to have more insights about the
> changes, not just do that because of a GKI Android.

OK good to know.

Thanks,

Tony

Re: [PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[Tony Lindgren]

* Daniel Lezcano <daniel.lezcano@linaro.org> [220523 12:37]:
> On 23/05/2022 09:13, Tony Lindgren wrote:
> > Did you notice some loadable module usage issues for timers that are not
> > system timers? Just wondering if there are some issues that I did not
> > notice.
> 
> I think the removal won't be supported. We already had a proposal to move
> one of the timer as a module but I wanted to have more insights about the
> changes, not just do that because of a GKI Android.

OK good to know.

Thanks,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[tip: timers/core] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

[tip-bot2 for Tony Lindgren]

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     ab0bbef3ae0f6b5a3b60671cd0124d0fc4fc2567
Gitweb:        https://git.kernel.org/tip/ab0bbef3ae0f6b5a3b60671cd0124d0fc4fc2567
Author:        Tony Lindgren <tony@atomide.com>
AuthorDate:    Fri, 08 Apr 2022 13:17:14 +03:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Wed, 27 Jul 2022 17:00:48 +02:00

clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3

Let's make timer-ti-dm selectable for ARCH_K3, and add a separate option
for OMAP_DM_SYSTIMER as there should be no need for it on ARCH_K3.

For older TI SoCs, we are already selecting OMAP_DM_TIMER in
arch/arm/mach-omap*/Kconfig. For mach-omap2, we need to now also select
OMAP_DM_SYSTIMER.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-3-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/arm/mach-omap2/Kconfig  | 2 ++
 drivers/clocksource/Kconfig  | 8 +++++++-
 drivers/clocksource/Makefile | 2 +-
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 02c253d..21e9928 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -105,6 +105,7 @@ config ARCH_OMAP2PLUS
 	select MACH_OMAP_GENERIC
 	select MEMORY
 	select MFD_SYSCON
+	select OMAP_DM_SYSTIMER
 	select OMAP_DM_TIMER
 	select OMAP_GPMC
 	select PINCTRL
@@ -160,6 +161,7 @@ config SOC_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP2
 	default y
+	select OMAP_DM_SYSTIMER
 	select OMAP_DM_TIMER
 	select SOC_HAS_OMAP2_SDRC
 
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 2dcdf02..967dcfb 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -22,7 +22,7 @@ config CLKEVT_I8253
 config I8253_LOCK
 	bool
 
-config OMAP_DM_TIMER
+config OMAP_DM_SYSTIMER
 	bool
 	select TIMER_OF
 
@@ -56,6 +56,12 @@ config DIGICOLOR_TIMER
 	help
 	  Enables the support for the digicolor timer driver.
 
+config OMAP_DM_TIMER
+	tristate "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST
+	select TIMER_OF
+	help
+	  Enables the support for the TI dual-mode timer driver.
+
 config DW_APB_TIMER
 	bool "DW APB timer driver" if COMPILE_TEST
 	help
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 685430d..fadb5a8 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
 obj-$(CONFIG_DAVINCI_TIMER)	+= timer-davinci.o
 obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
 obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm.o
-obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm-systimer.o
+obj-$(CONFIG_OMAP_DM_SYSTIMER)	+= timer-ti-dm-systimer.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o

[PATCH 3/3] clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCs

[Tony Lindgren]

Add compatible for ti,am654-timer to support the timers. For example, am654
has four timers in the MCU domain and 12 timers in the MAIN domain.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clocksource/timer-ti-dm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -1037,6 +1037,10 @@ static const struct dmtimer_platform_data omap3plus_pdata = {
 	.timer_ops = &dmtimer_ops,
 };
 
+static const struct dmtimer_platform_data am6_pdata = {
+	.timer_ops = &dmtimer_ops,
+};
+
 static const struct of_device_id omap_timer_match[] = {
 	{
 		.compatible = "ti,omap2420-timer",
@@ -1065,6 +1069,10 @@ static const struct of_device_id omap_timer_match[] = {
 		.compatible = "ti,dm816-timer",
 		.data = &omap3plus_pdata,
 	},
+	{
+		.compatible = "ti,am654-timer",
+		.data = &am6_pdata,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, omap_timer_match);
-- 
2.35.1

[PATCH 3/3] clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCs

[Tony Lindgren]

Add compatible for ti,am654-timer to support the timers. For example, am654
has four timers in the MCU domain and 12 timers in the MAIN domain.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clocksource/timer-ti-dm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -1037,6 +1037,10 @@ static const struct dmtimer_platform_data omap3plus_pdata = {
 	.timer_ops = &dmtimer_ops,
 };
 
+static const struct dmtimer_platform_data am6_pdata = {
+	.timer_ops = &dmtimer_ops,
+};
+
 static const struct of_device_id omap_timer_match[] = {
 	{
 		.compatible = "ti,omap2420-timer",
@@ -1065,6 +1069,10 @@ static const struct of_device_id omap_timer_match[] = {
 		.compatible = "ti,dm816-timer",
 		.data = &omap3plus_pdata,
 	},
+	{
+		.compatible = "ti,am654-timer",
+		.data = &am6_pdata,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, omap_timer_match);
-- 
2.35.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[tip: timers/core] clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCs

[tip-bot2 for Tony Lindgren]

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     4e3203610a889c72e96ddfc9e601b9349ef19c00
Gitweb:        https://git.kernel.org/tip/4e3203610a889c72e96ddfc9e601b9349ef19c00
Author:        Tony Lindgren <tony@atomide.com>
AuthorDate:    Fri, 08 Apr 2022 13:17:15 +03:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Wed, 27 Jul 2022 17:00:48 +02:00

clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCs

Add compatible for ti,am654-timer to support the timers. For example, am654
has four timers in the MCU domain and 12 timers in the MAIN domain.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-4-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-ti-dm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
index 530b71f..80d7e5a 100644
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -1036,6 +1036,10 @@ static const struct dmtimer_platform_data omap3plus_pdata = {
 	.timer_ops = &dmtimer_ops,
 };
 
+static const struct dmtimer_platform_data am6_pdata = {
+	.timer_ops = &dmtimer_ops,
+};
+
 static const struct of_device_id omap_timer_match[] = {
 	{
 		.compatible = "ti,omap2420-timer",
@@ -1064,6 +1068,10 @@ static const struct of_device_id omap_timer_match[] = {
 		.compatible = "ti,dm816-timer",
 		.data = &omap3plus_pdata,
 	},
+	{
+		.compatible = "ti,am654-timer",
+		.data = &am6_pdata,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, omap_timer_match);