From: Drew Fustini <dfustini@tenstorrent.com>
To: Michal Wilczynski <m.wilczynski@samsung.com>
Cc: drew@pdp7.com, guoren@kernel.org, wefu@redhat.com,
jassisinghbrar@gmail.com, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, paul.walmsley@sifive.com,
palmer@dabbelt.com, aou@eecs.berkeley.edu,
m.szyprowski@samsung.com, samuel.holland@sifive.com,
emil.renner.berthing@canonical.com,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, christophe.jaillet@wanadoo.fr
Subject: Re: [PATCH v6 3/3] riscv: dts: thead: Add mailbox node
Date: Wed, 11 Dec 2024 14:15:01 -0800 [thread overview]
Message-ID: <Z1oO5ewIOMFco4KI@x1> (raw)
In-Reply-To: <20241104100734.1276116-4-m.wilczynski@samsung.com>
On Mon, Nov 04, 2024 at 11:07:34AM +0100, Michal Wilczynski wrote:
> Add mailbox device tree node. This work is based on the vendor kernel [1].
>
> Link: https://github.com/revyos/thead-kernel.git [1]
>
> Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
> ---
> arch/riscv/boot/dts/thead/th1520.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index 6992060e6a54..89de5634d3d3 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -520,6 +520,22 @@ timer7: timer@ffffc3303c {
> status = "disabled";
> };
>
> + mbox_910t: mailbox@ffffc38000 {
> + compatible = "thead,th1520-mbox";
> + reg = <0xff 0xffc38000 0x0 0x6000>,
> + <0xff 0xffc40000 0x0 0x6000>,
> + <0xff 0xffc4c000 0x0 0x2000>,
> + <0xff 0xffc54000 0x0 0x2000>;
> + reg-names = "local", "remote-icu0", "remote-icu1", "remote-icu2";
> + clocks = <&clk CLK_MBOX0>, <&clk CLK_MBOX1>, <&clk CLK_MBOX2>,
> + <&clk CLK_MBOX3>;
> + clock-names = "clk-local", "clk-remote-icu0", "clk-remote-icu1",
> + "clk-remote-icu2";
> + interrupt-parent = <&plic>;
> + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <1>;
> + };
> +
> ao_gpio0: gpio@fffff41000 {
> compatible = "snps,dw-apb-gpio";
> reg = <0xff 0xfff41000 0x0 0x1000>;
> --
> 2.34.1
>
Reviewed-by: Drew Fustini <dfustini@tenstorrent.com>
dt_binding_check and dtbs_check are clean when I apply this patch to
v6.13-rc1. There is trivial conflict due to the gpio node label having
changed. I'll resolve it when I apply the patch to thead-dt-for-next.
Thanks,
Drew
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Drew Fustini <dfustini@tenstorrent.com>
To: Michal Wilczynski <m.wilczynski@samsung.com>
Cc: drew@pdp7.com, guoren@kernel.org, wefu@redhat.com,
jassisinghbrar@gmail.com, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, paul.walmsley@sifive.com,
palmer@dabbelt.com, aou@eecs.berkeley.edu,
m.szyprowski@samsung.com, samuel.holland@sifive.com,
emil.renner.berthing@canonical.com,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, christophe.jaillet@wanadoo.fr
Subject: Re: [PATCH v6 3/3] riscv: dts: thead: Add mailbox node
Date: Wed, 11 Dec 2024 14:15:01 -0800 [thread overview]
Message-ID: <Z1oO5ewIOMFco4KI@x1> (raw)
In-Reply-To: <20241104100734.1276116-4-m.wilczynski@samsung.com>
On Mon, Nov 04, 2024 at 11:07:34AM +0100, Michal Wilczynski wrote:
> Add mailbox device tree node. This work is based on the vendor kernel [1].
>
> Link: https://github.com/revyos/thead-kernel.git [1]
>
> Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
> ---
> arch/riscv/boot/dts/thead/th1520.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index 6992060e6a54..89de5634d3d3 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -520,6 +520,22 @@ timer7: timer@ffffc3303c {
> status = "disabled";
> };
>
> + mbox_910t: mailbox@ffffc38000 {
> + compatible = "thead,th1520-mbox";
> + reg = <0xff 0xffc38000 0x0 0x6000>,
> + <0xff 0xffc40000 0x0 0x6000>,
> + <0xff 0xffc4c000 0x0 0x2000>,
> + <0xff 0xffc54000 0x0 0x2000>;
> + reg-names = "local", "remote-icu0", "remote-icu1", "remote-icu2";
> + clocks = <&clk CLK_MBOX0>, <&clk CLK_MBOX1>, <&clk CLK_MBOX2>,
> + <&clk CLK_MBOX3>;
> + clock-names = "clk-local", "clk-remote-icu0", "clk-remote-icu1",
> + "clk-remote-icu2";
> + interrupt-parent = <&plic>;
> + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <1>;
> + };
> +
> ao_gpio0: gpio@fffff41000 {
> compatible = "snps,dw-apb-gpio";
> reg = <0xff 0xfff41000 0x0 0x1000>;
> --
> 2.34.1
>
Reviewed-by: Drew Fustini <dfustini@tenstorrent.com>
dt_binding_check and dtbs_check are clean when I apply this patch to
v6.13-rc1. There is trivial conflict due to the gpio node label having
changed. I'll resolve it when I apply the patch to thead-dt-for-next.
Thanks,
Drew
next prev parent reply other threads:[~2024-12-11 22:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20241104100757eucas1p15156cbe4466b785095cfb788192a7077@eucas1p1.samsung.com>
2024-11-04 10:07 ` [PATCH v6 0/3] Introduce support for T-head TH1520 Mailbox Michal Wilczynski
2024-11-04 10:07 ` Michal Wilczynski
2024-11-04 10:07 ` [PATCH v6 1/3] mailbox: Introduce support for T-head TH1520 Mailbox driver Michal Wilczynski
2024-11-04 10:07 ` Michal Wilczynski
2024-11-04 10:07 ` [PATCH v6 2/3] dt-bindings: mailbox: Add thead,th1520-mailbox bindings Michal Wilczynski
2024-11-04 10:07 ` Michal Wilczynski
2024-11-04 10:07 ` [PATCH v6 3/3] riscv: dts: thead: Add mailbox node Michal Wilczynski
2024-11-04 10:07 ` Michal Wilczynski
2024-12-11 22:15 ` Drew Fustini [this message]
2024-12-11 22:15 ` Drew Fustini
2024-12-13 2:56 ` Drew Fustini
2024-12-13 2:56 ` Drew Fustini
2024-12-13 4:23 ` Drew Fustini
2024-12-13 4:23 ` Drew Fustini
2024-12-17 14:04 ` Michal Wilczynski
2024-12-17 14:04 ` Michal Wilczynski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z1oO5ewIOMFco4KI@x1 \
--to=dfustini@tenstorrent.com \
--cc=aou@eecs.berkeley.edu \
--cc=christophe.jaillet@wanadoo.fr \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=drew@pdp7.com \
--cc=emil.renner.berthing@canonical.com \
--cc=guoren@kernel.org \
--cc=jassisinghbrar@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=m.szyprowski@samsung.com \
--cc=m.wilczynski@samsung.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=samuel.holland@sifive.com \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.