Re: [PATCH 2/4] firmware: arm_scmi: bus: Bypass setting fwnode for pinctrl

[Cristian Marussi <cristian.marussi@arm.com>]

On Wed, Dec 25, 2024 at 04:20:45PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> pinctrl-scmi.c and pinctrl-imx-scmi.c, both use SCMI_PROTOCOL_PINCTRL.
> If both drivers are built in, and the scmi device with name "pinctrl-imx"
> is created earlier, and the fwnode device points to the scmi device,
> non-i.MX platforms will never have the pinctrl supplier ready.
> 
> So bypass setting fwnode for scmi pinctrl devices that non
> compatible with socs.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/firmware/arm_scmi/bus.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
> index 12190d4dabb65484543044b4424fbe3b67245466..87665b09c8ff492953c8300f80ed73eab6cce4fd 100644
> --- a/drivers/firmware/arm_scmi/bus.c
> +++ b/drivers/firmware/arm_scmi/bus.c
> @@ -345,6 +345,11 @@ static void __scmi_device_destroy(struct scmi_device *scmi_dev)
>  	device_unregister(&scmi_dev->dev);
>  }
>  
> +static const char * const scmi_pinctrl_imx_lists[] = {
> +	"fsl,imx95",
> +	NULL
> +};
> +
>  static int
>  __scmi_device_set_node(struct scmi_device *scmi_dev, struct device_node *np,
>  		       int protocol, const char *name)
> @@ -353,6 +358,15 @@ __scmi_device_set_node(struct scmi_device *scmi_dev, struct device_node *np,
>  	if ((protocol == SCMI_PROTOCOL_PERF) && !strcmp(name, "cpufreq"))
>  		return 0;
>  
> +	if (protocol == SCMI_PROTOCOL_PINCTRL) {
> +		if (!strcmp(name, "pinctrl") &&
> +		    of_machine_compatible_match(scmi_pinctrl_imx_lists))
> +			return 0;
> +		if (!strcmp(name, "pinctrl-imx") &&
> +		    !of_machine_compatible_match(scmi_pinctrl_imx_lists))
> +			return 0;
> +	}

...and same here, you could set a flag scmi_dev->avoid_devlink and
just avoid calling device_link_add instead of killing the device_node...

Thanks,
Cristian