[PATCH bpf-next v4 0/2] selftests/xsk: Add tests for XDP tail adjustment in AF_XDP

[PATCH bpf-next v4 0/2] selftests/xsk: Add tests for XDP tail adjustment in AF_XDP

[Tushar Vyavahare]

This patch series adds tests to validate the XDP tail adjustment
functionality, focusing on its use within the AF_XDP context. The tests
verify dynamic packet size manipulation using the bpf_xdp_adjust_tail()
helper function, covering both single and multi-buffer scenarios.

v1 -> v2:
1. Retain and extend stream replacement: Keep `pkt_stream_replace`
   unchanged. Add `pkt_stream_replace_ifobject` for targeted ifobject
   handling.

2. Consolidate patches: Merge patches 2 to 6 for tail adjustment tests and
   check.

v2 -> v3:
1. Introduce `adjust_value` to replace `count` for clearer communication
   with userspace.

v3 -> v4:
1. Remove `testapp_adjust_tail_common()`. [Maciej]

2. Add comments and modify code for buffer resizing logic in test cases
   (shrink/grow by specific byte sizes for testing purposes). [Maciej]

---
Patch Summary:

1. Packet stream replacement: Add `pkt_stream_replace_ifobject` to manage
   packet streams efficiently.

2. Tail adjustment tests and support check: Implement dynamic packet
   resizing in xskxceiver by adding `xsk_xdp_adjust_tail` and extend this
   functionality to userspace with `testapp_xdp_adjust_tail` for
   validation. Ensure support by adding `is_adjust_tail_supported` to
   verify the availability of `bpf_xdp_adjust_tail()`. Introduce tests for
   shrinking and growing packets using `bpf_xdp_adjust_tail()`, covering
   both single and multi-buffer scenarios when used with AF_XDP.
---

Tushar Vyavahare (2):
  selftests/xsk: Add packet stream replacement function
  selftests/xsk: Add tail adjustment tests and support check

Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>

 .../selftests/bpf/progs/xsk_xdp_progs.c       |  50 ++++++++
 tools/testing/selftests/bpf/xsk_xdp_common.h  |   1 +
 tools/testing/selftests/bpf/xskxceiver.c      | 118 ++++++++++++++++--
 tools/testing/selftests/bpf/xskxceiver.h      |   2 +
 4 files changed, 163 insertions(+), 8 deletions(-)

-- 
2.34.1

[PATCH bpf-next v4 1/2] selftests/xsk: Add packet stream replacement function

[Tushar Vyavahare]

Add pkt_stream_replace_ifobject function to replace the packet stream for
a given ifobject.

Enable separate TX and RX packet replacement, allowing RX side packet
length adjustments using bpf_xdp_adjust_tail() in the upcoming patch.
Currently, pkt_stream_replace() works on both TX and RX packet streams,
and this new function provides the ability to modify one of them.

Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
---
 tools/testing/selftests/bpf/xskxceiver.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c
index 11f047b8af75..d60ee6a31c09 100644
--- a/tools/testing/selftests/bpf/xskxceiver.c
+++ b/tools/testing/selftests/bpf/xskxceiver.c
@@ -757,14 +757,15 @@ static struct pkt_stream *pkt_stream_clone(struct pkt_stream *pkt_stream)
 	return pkt_stream_generate(pkt_stream->nb_pkts, pkt_stream->pkts[0].len);
 }
 
-static void pkt_stream_replace(struct test_spec *test, u32 nb_pkts, u32 pkt_len)
+static void pkt_stream_replace_ifobject(struct ifobject *ifobj, u32 nb_pkts, u32 pkt_len)
 {
-	struct pkt_stream *pkt_stream;
+	ifobj->xsk->pkt_stream = pkt_stream_generate(nb_pkts, pkt_len);
+}
 
-	pkt_stream = pkt_stream_generate(nb_pkts, pkt_len);
-	test->ifobj_tx->xsk->pkt_stream = pkt_stream;
-	pkt_stream = pkt_stream_generate(nb_pkts, pkt_len);
-	test->ifobj_rx->xsk->pkt_stream = pkt_stream;
+static void pkt_stream_replace(struct test_spec *test, u32 nb_pkts, u32 pkt_len)
+{
+	pkt_stream_replace_ifobject(test->ifobj_tx, nb_pkts, pkt_len);
+	pkt_stream_replace_ifobject(test->ifobj_rx, nb_pkts, pkt_len);
 }
 
 static void __pkt_stream_replace_half(struct ifobject *ifobj, u32 pkt_len,
-- 
2.34.1

Re: [PATCH bpf-next v4 1/2] selftests/xsk: Add packet stream replacement function

[Maciej Fijalkowski]

On Fri, Mar 21, 2025 at 12:54:18AM +0000, Tushar Vyavahare wrote:
> Add pkt_stream_replace_ifobject function to replace the packet stream for
> a given ifobject.
> 
> Enable separate TX and RX packet replacement, allowing RX side packet
> length adjustments using bpf_xdp_adjust_tail() in the upcoming patch.
> Currently, pkt_stream_replace() works on both TX and RX packet streams,
> and this new function provides the ability to modify one of them.
> 
> Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
> ---
>  tools/testing/selftests/bpf/xskxceiver.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)

Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

> 
> diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c
> index 11f047b8af75..d60ee6a31c09 100644
> --- a/tools/testing/selftests/bpf/xskxceiver.c
> +++ b/tools/testing/selftests/bpf/xskxceiver.c
> @@ -757,14 +757,15 @@ static struct pkt_stream *pkt_stream_clone(struct pkt_stream *pkt_stream)
>  	return pkt_stream_generate(pkt_stream->nb_pkts, pkt_stream->pkts[0].len);
>  }
>  
> -static void pkt_stream_replace(struct test_spec *test, u32 nb_pkts, u32 pkt_len)
> +static void pkt_stream_replace_ifobject(struct ifobject *ifobj, u32 nb_pkts, u32 pkt_len)
>  {
> -	struct pkt_stream *pkt_stream;
> +	ifobj->xsk->pkt_stream = pkt_stream_generate(nb_pkts, pkt_len);
> +}
>  
> -	pkt_stream = pkt_stream_generate(nb_pkts, pkt_len);
> -	test->ifobj_tx->xsk->pkt_stream = pkt_stream;
> -	pkt_stream = pkt_stream_generate(nb_pkts, pkt_len);
> -	test->ifobj_rx->xsk->pkt_stream = pkt_stream;
> +static void pkt_stream_replace(struct test_spec *test, u32 nb_pkts, u32 pkt_len)
> +{
> +	pkt_stream_replace_ifobject(test->ifobj_tx, nb_pkts, pkt_len);
> +	pkt_stream_replace_ifobject(test->ifobj_rx, nb_pkts, pkt_len);
>  }
>  
>  static void __pkt_stream_replace_half(struct ifobject *ifobj, u32 pkt_len,
> -- 
> 2.34.1
> 

[PATCH bpf-next v4 2/2] selftests/xsk: Add tail adjustment tests and support check

[Tushar Vyavahare]

Introduce tail adjustment functionality in xskxceiver using
bpf_xdp_adjust_tail(). Add `xsk_xdp_adjust_tail` to modify packet sizes
and drop unmodified packets. Implement `is_adjust_tail_supported` to check
helper availability. Develop packet resizing tests, including shrinking
and growing scenarios, with functions for both single-buffer and
multi-buffer cases. Update the test framework to handle various scenarios
and adjust MTU settings. These changes enhance the testing of packet tail
adjustments, improving AF_XDP framework reliability.

Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
---
 .../selftests/bpf/progs/xsk_xdp_progs.c       |  50 +++++++++
 tools/testing/selftests/bpf/xsk_xdp_common.h  |   1 +
 tools/testing/selftests/bpf/xskxceiver.c      | 105 +++++++++++++++++-
 tools/testing/selftests/bpf/xskxceiver.h      |   2 +
 4 files changed, 156 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c b/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c
index ccde6a4c6319..683306db8594 100644
--- a/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c
+++ b/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c
@@ -4,6 +4,8 @@
 #include <linux/bpf.h>
 #include <bpf/bpf_helpers.h>
 #include <linux/if_ether.h>
+#include <linux/ip.h>
+#include <linux/errno.h>
 #include "xsk_xdp_common.h"
 
 struct {
@@ -14,6 +16,7 @@ struct {
 } xsk SEC(".maps");
 
 static unsigned int idx;
+int adjust_value = 0;
 int count = 0;
 
 SEC("xdp.frags") int xsk_def_prog(struct xdp_md *xdp)
@@ -70,4 +73,51 @@ SEC("xdp") int xsk_xdp_shared_umem(struct xdp_md *xdp)
 	return bpf_redirect_map(&xsk, idx, XDP_DROP);
 }
 
+SEC("xdp.frags") int xsk_xdp_adjust_tail(struct xdp_md *xdp)
+{
+	__u32 buff_len, curr_buff_len;
+	int ret;
+
+	buff_len = bpf_xdp_get_buff_len(xdp);
+	if (buff_len == 0)
+		return XDP_DROP;
+
+	ret = bpf_xdp_adjust_tail(xdp, adjust_value);
+	if (ret < 0) {
+		/* Handle unsupported cases */
+		if (ret == -EOPNOTSUPP) {
+			/* Set adjust_value to -EOPNOTSUPP to indicate to userspace that this case
+			 * is unsupported
+			 */
+			adjust_value = -EOPNOTSUPP;
+			return bpf_redirect_map(&xsk, 0, XDP_DROP);
+		}
+
+		return XDP_DROP;
+	}
+
+	curr_buff_len = bpf_xdp_get_buff_len(xdp);
+	if (curr_buff_len != buff_len + adjust_value)
+		return XDP_DROP;
+
+	if (curr_buff_len > buff_len) {
+		__u32 *pkt_data = (void *)(long)xdp->data;
+		__u32 len, words_to_end, seq_num;
+
+		len = curr_buff_len - PKT_HDR_ALIGN;
+		words_to_end = len / sizeof(*pkt_data) - 1;
+		seq_num = words_to_end;
+
+		/* Convert sequence number to network byte order. Store this in the last 4 bytes of
+		 * the packet. Use 'adjust_value' to determine the position at the end of the
+		 * packet for storing the sequence number.
+		 */
+		seq_num = __constant_htonl(words_to_end);
+		bpf_xdp_store_bytes(xdp, curr_buff_len - sizeof(seq_num), &seq_num,
+				    sizeof(seq_num));
+	}
+
+	return bpf_redirect_map(&xsk, 0, XDP_DROP);
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/xsk_xdp_common.h b/tools/testing/selftests/bpf/xsk_xdp_common.h
index 5a6f36f07383..45810ff552da 100644
--- a/tools/testing/selftests/bpf/xsk_xdp_common.h
+++ b/tools/testing/selftests/bpf/xsk_xdp_common.h
@@ -4,6 +4,7 @@
 #define XSK_XDP_COMMON_H_
 
 #define MAX_SOCKETS 2
+#define PKT_HDR_ALIGN (sizeof(struct ethhdr) + 2) /* Just to align the data in the packet */
 
 struct xdp_info {
 	__u64 count;
diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c
index d60ee6a31c09..0ced4026ee44 100644
--- a/tools/testing/selftests/bpf/xskxceiver.c
+++ b/tools/testing/selftests/bpf/xskxceiver.c
@@ -524,6 +524,8 @@ static void __test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx,
 	test->nb_sockets = 1;
 	test->fail = false;
 	test->set_ring = false;
+	test->adjust_tail = false;
+	test->adjust_tail_support = false;
 	test->mtu = MAX_ETH_PKT_SIZE;
 	test->xdp_prog_rx = ifobj_rx->xdp_progs->progs.xsk_def_prog;
 	test->xskmap_rx = ifobj_rx->xdp_progs->maps.xsk;
@@ -992,6 +994,31 @@ static bool is_metadata_correct(struct pkt *pkt, void *buffer, u64 addr)
 	return true;
 }
 
+static bool is_adjust_tail_supported(struct xsk_xdp_progs *skel_rx)
+{
+	struct bpf_map *data_map;
+	int adjust_value = 0;
+	int key = 0;
+	int ret;
+
+	data_map = bpf_object__find_map_by_name(skel_rx->obj, "xsk_xdp_.bss");
+	if (!data_map || !bpf_map__is_internal(data_map)) {
+		ksft_print_msg("Error: could not find bss section of XDP program\n");
+		exit_with_error(errno);
+	}
+
+	ret = bpf_map_lookup_elem(bpf_map__fd(data_map), &key, &adjust_value);
+	if (ret) {
+		ksft_print_msg("Error: bpf_map_lookup_elem failed with error %d\n", ret);
+		exit_with_error(errno);
+	}
+
+	/* Set the 'adjust_value' variable to -EOPNOTSUPP in the XDP program if the adjust_tail
+	 * helper is not supported. Skip the adjust_tail test case in this scenario.
+	 */
+	return adjust_value != -EOPNOTSUPP;
+}
+
 static bool is_frag_valid(struct xsk_umem_info *umem, u64 addr, u32 len, u32 expected_pkt_nb,
 			  u32 bytes_processed)
 {
@@ -1768,8 +1795,13 @@ static void *worker_testapp_validate_rx(void *arg)
 
 	if (!err && ifobject->validation_func)
 		err = ifobject->validation_func(ifobject);
-	if (err)
-		report_failure(test);
+
+	if (err) {
+		if (test->adjust_tail && !is_adjust_tail_supported(ifobject->xdp_progs))
+			test->adjust_tail_support = false;
+		else
+			report_failure(test);
+	}
 
 	pthread_exit(NULL);
 }
@@ -2516,6 +2548,71 @@ static int testapp_hw_sw_max_ring_size(struct test_spec *test)
 	return testapp_validate_traffic(test);
 }
 
+static int testapp_xdp_adjust_tail(struct test_spec *test, int adjust_value)
+{
+	struct xsk_xdp_progs *skel_rx = test->ifobj_rx->xdp_progs;
+	struct xsk_xdp_progs *skel_tx = test->ifobj_tx->xdp_progs;
+
+	test_spec_set_xdp_prog(test, skel_rx->progs.xsk_xdp_adjust_tail,
+			       skel_tx->progs.xsk_xdp_adjust_tail,
+			       skel_rx->maps.xsk, skel_tx->maps.xsk);
+
+	skel_rx->bss->adjust_value = adjust_value;
+
+	return testapp_validate_traffic(test);
+}
+
+static int testapp_adjust_tail(struct test_spec *test, u32 value, u32 pkt_len)
+{
+	int ret;
+
+	test->adjust_tail_support = true;
+	test->adjust_tail = true;
+	test->total_steps = 1;
+
+	pkt_stream_replace_ifobject(test->ifobj_tx, DEFAULT_BATCH_SIZE, pkt_len);
+	pkt_stream_replace_ifobject(test->ifobj_rx, DEFAULT_BATCH_SIZE, pkt_len + value);
+
+	ret = testapp_xdp_adjust_tail(test, value);
+	if (ret)
+		return ret;
+
+	if (!test->adjust_tail_support) {
+		ksft_test_result_skip("%s %sResize pkt with bpf_xdp_adjust_tail() not supported\n",
+				      mode_string(test), busy_poll_string(test));
+		return TEST_SKIP;
+	}
+
+	return 0;
+}
+
+static int testapp_adjust_tail_shrink(struct test_spec *test)
+{
+	/* Shrink by 4 bytes for testing purpose */
+	return testapp_adjust_tail(test, -4, MIN_PKT_SIZE * 2);
+}
+
+static int testapp_adjust_tail_shrink_mb(struct test_spec *test)
+{
+	test->mtu = MAX_ETH_JUMBO_SIZE;
+	/* Shrink by the frag size */
+	return testapp_adjust_tail(test, -XSK_UMEM__MAX_FRAME_SIZE, XSK_UMEM__LARGE_FRAME_SIZE * 2);
+}
+
+static int testapp_adjust_tail_grow(struct test_spec *test)
+{
+	/* Grow by 4 bytes for testing purpose */
+	return testapp_adjust_tail(test, 4, MIN_PKT_SIZE * 2);
+}
+
+static int testapp_adjust_tail_grow_mb(struct test_spec *test)
+{
+	test->mtu = MAX_ETH_JUMBO_SIZE;
+	/* Grow by (frag_size - last_frag_Size) - 1 to stay inside the last fragment */
+	return testapp_adjust_tail(test, (XSK_UMEM__MAX_FRAME_SIZE / 2) - 1,
+				   XSK_UMEM__LARGE_FRAME_SIZE * 2);
+}
+
 static void run_pkt_test(struct test_spec *test)
 {
 	int ret;
@@ -2622,6 +2719,10 @@ static const struct test_spec tests[] = {
 	{.name = "TOO_MANY_FRAGS", .test_func = testapp_too_many_frags},
 	{.name = "HW_SW_MIN_RING_SIZE", .test_func = testapp_hw_sw_min_ring_size},
 	{.name = "HW_SW_MAX_RING_SIZE", .test_func = testapp_hw_sw_max_ring_size},
+	{.name = "XDP_ADJUST_TAIL_SHRINK", .test_func = testapp_adjust_tail_shrink},
+	{.name = "XDP_ADJUST_TAIL_SHRINK_MULTI_BUFF", .test_func = testapp_adjust_tail_shrink_mb},
+	{.name = "XDP_ADJUST_TAIL_GROW", .test_func = testapp_adjust_tail_grow},
+	{.name = "XDP_ADJUST_TAIL_GROW_MULTI_BUFF", .test_func = testapp_adjust_tail_grow_mb},
 	};
 
 static void print_tests(void)
diff --git a/tools/testing/selftests/bpf/xskxceiver.h b/tools/testing/selftests/bpf/xskxceiver.h
index e46e823f6a1a..67fc44b2813b 100644
--- a/tools/testing/selftests/bpf/xskxceiver.h
+++ b/tools/testing/selftests/bpf/xskxceiver.h
@@ -173,6 +173,8 @@ struct test_spec {
 	u16 nb_sockets;
 	bool fail;
 	bool set_ring;
+	bool adjust_tail;
+	bool adjust_tail_support;
 	enum test_mode mode;
 	char name[MAX_TEST_NAME_SIZE];
 };
-- 
2.34.1

Re: [PATCH bpf-next v4 2/2] selftests/xsk: Add tail adjustment tests and support check

[Maciej Fijalkowski]

On Fri, Mar 21, 2025 at 12:54:19AM +0000, Tushar Vyavahare wrote:
> Introduce tail adjustment functionality in xskxceiver using
> bpf_xdp_adjust_tail(). Add `xsk_xdp_adjust_tail` to modify packet sizes
> and drop unmodified packets. Implement `is_adjust_tail_supported` to check
> helper availability. Develop packet resizing tests, including shrinking
> and growing scenarios, with functions for both single-buffer and
> multi-buffer cases. Update the test framework to handle various scenarios
> and adjust MTU settings. These changes enhance the testing of packet tail
> adjustments, improving AF_XDP framework reliability.
> 
> Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>

Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

We carry the description of executed tests at the beginning of
xskxceiver.c and you have not updated it with these adjust tail tests but
it's not a show-stopper to me. I'm okay with current state of this patch.

Bastien, you probably would want to take into consideration these changes
if they go in before your bigger work.

> ---
>  .../selftests/bpf/progs/xsk_xdp_progs.c       |  50 +++++++++
>  tools/testing/selftests/bpf/xsk_xdp_common.h  |   1 +
>  tools/testing/selftests/bpf/xskxceiver.c      | 105 +++++++++++++++++-
>  tools/testing/selftests/bpf/xskxceiver.h      |   2 +
>  4 files changed, 156 insertions(+), 2 deletions(-)
> 
> diff --git a/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c b/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c
> index ccde6a4c6319..683306db8594 100644
> --- a/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c
> +++ b/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c
> @@ -4,6 +4,8 @@
>  #include <linux/bpf.h>
>  #include <bpf/bpf_helpers.h>
>  #include <linux/if_ether.h>
> +#include <linux/ip.h>
> +#include <linux/errno.h>
>  #include "xsk_xdp_common.h"
>  
>  struct {
> @@ -14,6 +16,7 @@ struct {
>  } xsk SEC(".maps");
>  
>  static unsigned int idx;
> +int adjust_value = 0;
>  int count = 0;
>  
>  SEC("xdp.frags") int xsk_def_prog(struct xdp_md *xdp)
> @@ -70,4 +73,51 @@ SEC("xdp") int xsk_xdp_shared_umem(struct xdp_md *xdp)
>  	return bpf_redirect_map(&xsk, idx, XDP_DROP);
>  }
>  
> +SEC("xdp.frags") int xsk_xdp_adjust_tail(struct xdp_md *xdp)
> +{
> +	__u32 buff_len, curr_buff_len;
> +	int ret;
> +
> +	buff_len = bpf_xdp_get_buff_len(xdp);
> +	if (buff_len == 0)
> +		return XDP_DROP;
> +
> +	ret = bpf_xdp_adjust_tail(xdp, adjust_value);
> +	if (ret < 0) {
> +		/* Handle unsupported cases */
> +		if (ret == -EOPNOTSUPP) {
> +			/* Set adjust_value to -EOPNOTSUPP to indicate to userspace that this case
> +			 * is unsupported
> +			 */
> +			adjust_value = -EOPNOTSUPP;
> +			return bpf_redirect_map(&xsk, 0, XDP_DROP);
> +		}
> +
> +		return XDP_DROP;
> +	}
> +
> +	curr_buff_len = bpf_xdp_get_buff_len(xdp);
> +	if (curr_buff_len != buff_len + adjust_value)
> +		return XDP_DROP;
> +
> +	if (curr_buff_len > buff_len) {
> +		__u32 *pkt_data = (void *)(long)xdp->data;
> +		__u32 len, words_to_end, seq_num;
> +
> +		len = curr_buff_len - PKT_HDR_ALIGN;
> +		words_to_end = len / sizeof(*pkt_data) - 1;
> +		seq_num = words_to_end;
> +
> +		/* Convert sequence number to network byte order. Store this in the last 4 bytes of
> +		 * the packet. Use 'adjust_value' to determine the position at the end of the
> +		 * packet for storing the sequence number.
> +		 */
> +		seq_num = __constant_htonl(words_to_end);
> +		bpf_xdp_store_bytes(xdp, curr_buff_len - sizeof(seq_num), &seq_num,
> +				    sizeof(seq_num));
> +	}
> +
> +	return bpf_redirect_map(&xsk, 0, XDP_DROP);
> +}
> +
>  char _license[] SEC("license") = "GPL";
> diff --git a/tools/testing/selftests/bpf/xsk_xdp_common.h b/tools/testing/selftests/bpf/xsk_xdp_common.h
> index 5a6f36f07383..45810ff552da 100644
> --- a/tools/testing/selftests/bpf/xsk_xdp_common.h
> +++ b/tools/testing/selftests/bpf/xsk_xdp_common.h
> @@ -4,6 +4,7 @@
>  #define XSK_XDP_COMMON_H_
>  
>  #define MAX_SOCKETS 2
> +#define PKT_HDR_ALIGN (sizeof(struct ethhdr) + 2) /* Just to align the data in the packet */
>  
>  struct xdp_info {
>  	__u64 count;
> diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c
> index d60ee6a31c09..0ced4026ee44 100644
> --- a/tools/testing/selftests/bpf/xskxceiver.c
> +++ b/tools/testing/selftests/bpf/xskxceiver.c
> @@ -524,6 +524,8 @@ static void __test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx,
>  	test->nb_sockets = 1;
>  	test->fail = false;
>  	test->set_ring = false;
> +	test->adjust_tail = false;
> +	test->adjust_tail_support = false;
>  	test->mtu = MAX_ETH_PKT_SIZE;
>  	test->xdp_prog_rx = ifobj_rx->xdp_progs->progs.xsk_def_prog;
>  	test->xskmap_rx = ifobj_rx->xdp_progs->maps.xsk;
> @@ -992,6 +994,31 @@ static bool is_metadata_correct(struct pkt *pkt, void *buffer, u64 addr)
>  	return true;
>  }
>  
> +static bool is_adjust_tail_supported(struct xsk_xdp_progs *skel_rx)
> +{
> +	struct bpf_map *data_map;
> +	int adjust_value = 0;
> +	int key = 0;
> +	int ret;
> +
> +	data_map = bpf_object__find_map_by_name(skel_rx->obj, "xsk_xdp_.bss");
> +	if (!data_map || !bpf_map__is_internal(data_map)) {
> +		ksft_print_msg("Error: could not find bss section of XDP program\n");
> +		exit_with_error(errno);
> +	}
> +
> +	ret = bpf_map_lookup_elem(bpf_map__fd(data_map), &key, &adjust_value);
> +	if (ret) {
> +		ksft_print_msg("Error: bpf_map_lookup_elem failed with error %d\n", ret);
> +		exit_with_error(errno);
> +	}
> +
> +	/* Set the 'adjust_value' variable to -EOPNOTSUPP in the XDP program if the adjust_tail
> +	 * helper is not supported. Skip the adjust_tail test case in this scenario.
> +	 */
> +	return adjust_value != -EOPNOTSUPP;
> +}
> +
>  static bool is_frag_valid(struct xsk_umem_info *umem, u64 addr, u32 len, u32 expected_pkt_nb,
>  			  u32 bytes_processed)
>  {
> @@ -1768,8 +1795,13 @@ static void *worker_testapp_validate_rx(void *arg)
>  
>  	if (!err && ifobject->validation_func)
>  		err = ifobject->validation_func(ifobject);
> -	if (err)
> -		report_failure(test);
> +
> +	if (err) {
> +		if (test->adjust_tail && !is_adjust_tail_supported(ifobject->xdp_progs))
> +			test->adjust_tail_support = false;
> +		else
> +			report_failure(test);
> +	}
>  
>  	pthread_exit(NULL);
>  }
> @@ -2516,6 +2548,71 @@ static int testapp_hw_sw_max_ring_size(struct test_spec *test)
>  	return testapp_validate_traffic(test);
>  }
>  
> +static int testapp_xdp_adjust_tail(struct test_spec *test, int adjust_value)
> +{
> +	struct xsk_xdp_progs *skel_rx = test->ifobj_rx->xdp_progs;
> +	struct xsk_xdp_progs *skel_tx = test->ifobj_tx->xdp_progs;
> +
> +	test_spec_set_xdp_prog(test, skel_rx->progs.xsk_xdp_adjust_tail,
> +			       skel_tx->progs.xsk_xdp_adjust_tail,
> +			       skel_rx->maps.xsk, skel_tx->maps.xsk);
> +
> +	skel_rx->bss->adjust_value = adjust_value;
> +
> +	return testapp_validate_traffic(test);
> +}
> +
> +static int testapp_adjust_tail(struct test_spec *test, u32 value, u32 pkt_len)
> +{
> +	int ret;
> +
> +	test->adjust_tail_support = true;
> +	test->adjust_tail = true;
> +	test->total_steps = 1;
> +
> +	pkt_stream_replace_ifobject(test->ifobj_tx, DEFAULT_BATCH_SIZE, pkt_len);
> +	pkt_stream_replace_ifobject(test->ifobj_rx, DEFAULT_BATCH_SIZE, pkt_len + value);
> +
> +	ret = testapp_xdp_adjust_tail(test, value);
> +	if (ret)
> +		return ret;
> +
> +	if (!test->adjust_tail_support) {
> +		ksft_test_result_skip("%s %sResize pkt with bpf_xdp_adjust_tail() not supported\n",
> +				      mode_string(test), busy_poll_string(test));
> +		return TEST_SKIP;
> +	}
> +
> +	return 0;
> +}
> +
> +static int testapp_adjust_tail_shrink(struct test_spec *test)
> +{
> +	/* Shrink by 4 bytes for testing purpose */
> +	return testapp_adjust_tail(test, -4, MIN_PKT_SIZE * 2);
> +}
> +
> +static int testapp_adjust_tail_shrink_mb(struct test_spec *test)
> +{
> +	test->mtu = MAX_ETH_JUMBO_SIZE;
> +	/* Shrink by the frag size */
> +	return testapp_adjust_tail(test, -XSK_UMEM__MAX_FRAME_SIZE, XSK_UMEM__LARGE_FRAME_SIZE * 2);
> +}
> +
> +static int testapp_adjust_tail_grow(struct test_spec *test)
> +{
> +	/* Grow by 4 bytes for testing purpose */
> +	return testapp_adjust_tail(test, 4, MIN_PKT_SIZE * 2);
> +}
> +
> +static int testapp_adjust_tail_grow_mb(struct test_spec *test)
> +{
> +	test->mtu = MAX_ETH_JUMBO_SIZE;
> +	/* Grow by (frag_size - last_frag_Size) - 1 to stay inside the last fragment */
> +	return testapp_adjust_tail(test, (XSK_UMEM__MAX_FRAME_SIZE / 2) - 1,
> +				   XSK_UMEM__LARGE_FRAME_SIZE * 2);
> +}
> +
>  static void run_pkt_test(struct test_spec *test)
>  {
>  	int ret;
> @@ -2622,6 +2719,10 @@ static const struct test_spec tests[] = {
>  	{.name = "TOO_MANY_FRAGS", .test_func = testapp_too_many_frags},
>  	{.name = "HW_SW_MIN_RING_SIZE", .test_func = testapp_hw_sw_min_ring_size},
>  	{.name = "HW_SW_MAX_RING_SIZE", .test_func = testapp_hw_sw_max_ring_size},
> +	{.name = "XDP_ADJUST_TAIL_SHRINK", .test_func = testapp_adjust_tail_shrink},
> +	{.name = "XDP_ADJUST_TAIL_SHRINK_MULTI_BUFF", .test_func = testapp_adjust_tail_shrink_mb},
> +	{.name = "XDP_ADJUST_TAIL_GROW", .test_func = testapp_adjust_tail_grow},
> +	{.name = "XDP_ADJUST_TAIL_GROW_MULTI_BUFF", .test_func = testapp_adjust_tail_grow_mb},
>  	};
>  
>  static void print_tests(void)
> diff --git a/tools/testing/selftests/bpf/xskxceiver.h b/tools/testing/selftests/bpf/xskxceiver.h
> index e46e823f6a1a..67fc44b2813b 100644
> --- a/tools/testing/selftests/bpf/xskxceiver.h
> +++ b/tools/testing/selftests/bpf/xskxceiver.h
> @@ -173,6 +173,8 @@ struct test_spec {
>  	u16 nb_sockets;
>  	bool fail;
>  	bool set_ring;
> +	bool adjust_tail;
> +	bool adjust_tail_support;
>  	enum test_mode mode;
>  	char name[MAX_TEST_NAME_SIZE];
>  };
> -- 
> 2.34.1
> 

Re: [PATCH bpf-next v4 2/2] selftests/xsk: Add tail adjustment tests and support check

[Bastien Curutchet]

Hi Maciej

On 3/22/25 2:14 PM, Maciej Fijalkowski wrote:
> On Fri, Mar 21, 2025 at 12:54:19AM +0000, Tushar Vyavahare wrote:
>> Introduce tail adjustment functionality in xskxceiver using
>> bpf_xdp_adjust_tail(). Add `xsk_xdp_adjust_tail` to modify packet sizes
>> and drop unmodified packets. Implement `is_adjust_tail_supported` to check
>> helper availability. Develop packet resizing tests, including shrinking
>> and growing scenarios, with functions for both single-buffer and
>> multi-buffer cases. Update the test framework to handle various scenarios
>> and adjust MTU settings. These changes enhance the testing of packet tail
>> adjustments, improving AF_XDP framework reliability.
>>
>> Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
> 
> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> 
> We carry the description of executed tests at the beginning of
> xskxceiver.c and you have not updated it with these adjust tail tests but
> it's not a show-stopper to me. I'm okay with current state of this patch.
> 
> Bastien, you probably would want to take into consideration these changes
> if they go in before your bigger work.
> 

Thanks for the pointer, I'll keep an eye on it.

Best regards,
Bastien

Re: [PATCH bpf-next v4 0/2] selftests/xsk: Add tests for XDP tail adjustment in AF_XDP

[Maciej Fijalkowski]

On Fri, Mar 21, 2025 at 12:54:17AM +0000, Tushar Vyavahare wrote:
> This patch series adds tests to validate the XDP tail adjustment
> functionality, focusing on its use within the AF_XDP context. The tests
> verify dynamic packet size manipulation using the bpf_xdp_adjust_tail()
> helper function, covering both single and multi-buffer scenarios.
> 
> v1 -> v2:
> 1. Retain and extend stream replacement: Keep `pkt_stream_replace`
>    unchanged. Add `pkt_stream_replace_ifobject` for targeted ifobject
>    handling.
> 
> 2. Consolidate patches: Merge patches 2 to 6 for tail adjustment tests and
>    check.
> 
> v2 -> v3:
> 1. Introduce `adjust_value` to replace `count` for clearer communication
>    with userspace.
> 
> v3 -> v4:
> 1. Remove `testapp_adjust_tail_common()`. [Maciej]
> 
> 2. Add comments and modify code for buffer resizing logic in test cases
>    (shrink/grow by specific byte sizes for testing purposes). [Maciej]

Hi BPF maintainers,

could we merge this patch set as i have acked the patches? Or is there
something that stops us? I suppose this might have slipped during the
merge window?

Thanks,
Maciej

> 
> ---
> Patch Summary:
> 
> 1. Packet stream replacement: Add `pkt_stream_replace_ifobject` to manage
>    packet streams efficiently.
> 
> 2. Tail adjustment tests and support check: Implement dynamic packet
>    resizing in xskxceiver by adding `xsk_xdp_adjust_tail` and extend this
>    functionality to userspace with `testapp_xdp_adjust_tail` for
>    validation. Ensure support by adding `is_adjust_tail_supported` to
>    verify the availability of `bpf_xdp_adjust_tail()`. Introduce tests for
>    shrinking and growing packets using `bpf_xdp_adjust_tail()`, covering
>    both single and multi-buffer scenarios when used with AF_XDP.
> ---
> 
> Tushar Vyavahare (2):
>   selftests/xsk: Add packet stream replacement function
>   selftests/xsk: Add tail adjustment tests and support check
> 
> Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
> 
>  .../selftests/bpf/progs/xsk_xdp_progs.c       |  50 ++++++++
>  tools/testing/selftests/bpf/xsk_xdp_common.h  |   1 +
>  tools/testing/selftests/bpf/xskxceiver.c      | 118 ++++++++++++++++--
>  tools/testing/selftests/bpf/xskxceiver.h      |   2 +
>  4 files changed, 163 insertions(+), 8 deletions(-)
> 
> -- 
> 2.34.1
> 

Re: [PATCH bpf-next v4 0/2] selftests/xsk: Add tests for XDP tail adjustment in AF_XDP

[Alexei Starovoitov]

On Tue, Apr 8, 2025 at 9:55 AM Maciej Fijalkowski
<maciej.fijalkowski@intel.com> wrote:
>
> On Fri, Mar 21, 2025 at 12:54:17AM +0000, Tushar Vyavahare wrote:
> > This patch series adds tests to validate the XDP tail adjustment
> > functionality, focusing on its use within the AF_XDP context. The tests
> > verify dynamic packet size manipulation using the bpf_xdp_adjust_tail()
> > helper function, covering both single and multi-buffer scenarios.
> >
> > v1 -> v2:
> > 1. Retain and extend stream replacement: Keep `pkt_stream_replace`
> >    unchanged. Add `pkt_stream_replace_ifobject` for targeted ifobject
> >    handling.
> >
> > 2. Consolidate patches: Merge patches 2 to 6 for tail adjustment tests and
> >    check.
> >
> > v2 -> v3:
> > 1. Introduce `adjust_value` to replace `count` for clearer communication
> >    with userspace.
> >
> > v3 -> v4:
> > 1. Remove `testapp_adjust_tail_common()`. [Maciej]
> >
> > 2. Add comments and modify code for buffer resizing logic in test cases
> >    (shrink/grow by specific byte sizes for testing purposes). [Maciej]
>
> Hi BPF maintainers,
>
> could we merge this patch set as i have acked the patches? Or is there
> something that stops us? I suppose this might have slipped during the
> merge window?

Sorry. It got lost. Please resend the set.

[PATCH bpf-next v4 0/2] selftests/xsk: Add tests for XDP tail adjustment in AF_XDP

[Tushar Vyavahare]

This patch series adds tests to validate the XDP tail adjustment
functionality, focusing on its use within the AF_XDP context. The tests
verify dynamic packet size manipulation using the bpf_xdp_adjust_tail()
helper function, covering both single and multi-buffer scenarios.

v1 -> v2:
1. Retain and extend stream replacement: Keep `pkt_stream_replace`
   unchanged. Add `pkt_stream_replace_ifobject` for targeted ifobject
   handling.

2. Consolidate patches: Merge patches 2 to 6 for tail adjustment tests and
   check.

v2 -> v3:
1. Introduce `adjust_value` to replace `count` for clearer communication
   with userspace.

v3 -> v4:
1. Remove `testapp_adjust_tail_common()`. [Maciej]

2. Add comments and modify code for buffer resizing logic in test cases
   (shrink/grow by specific byte sizes for testing purposes). [Maciej]

---
Patch Summary:

1. Packet stream replacement: Add `pkt_stream_replace_ifobject` to manage
   packet streams efficiently.

2. Tail adjustment tests and support check: Implement dynamic packet
   resizing in xskxceiver by adding `xsk_xdp_adjust_tail` and extend this
   functionality to userspace with `testapp_xdp_adjust_tail` for
   validation. Ensure support by adding `is_adjust_tail_supported` to
   verify the availability of `bpf_xdp_adjust_tail()`. Introduce tests for
   shrinking and growing packets using `bpf_xdp_adjust_tail()`, covering
   both single and multi-buffer scenarios when used with AF_XDP.
---

Tushar Vyavahare (2):
  selftests/xsk: Add packet stream replacement function
  selftests/xsk: Add tail adjustment tests and support check

Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

 .../selftests/bpf/progs/xsk_xdp_progs.c       |  50 ++++++++
 tools/testing/selftests/bpf/xsk_xdp_common.h  |   1 +
 tools/testing/selftests/bpf/xskxceiver.c      | 118 ++++++++++++++++--
 tools/testing/selftests/bpf/xskxceiver.h      |   2 +
 4 files changed, 163 insertions(+), 8 deletions(-)

-- 
2.34.1

[PATCH bpf-next v4 2/2] selftests/xsk: Add tail adjustment tests and support check

[Tushar Vyavahare]

Introduce tail adjustment functionality in xskxceiver using
bpf_xdp_adjust_tail(). Add `xsk_xdp_adjust_tail` to modify packet sizes
and drop unmodified packets. Implement `is_adjust_tail_supported` to check
helper availability. Develop packet resizing tests, including shrinking
and growing scenarios, with functions for both single-buffer and
multi-buffer cases. Update the test framework to handle various scenarios
and adjust MTU settings. These changes enhance the testing of packet tail
adjustments, improving AF_XDP framework reliability.

Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
---
 .../selftests/bpf/progs/xsk_xdp_progs.c       |  50 +++++++++
 tools/testing/selftests/bpf/xsk_xdp_common.h  |   1 +
 tools/testing/selftests/bpf/xskxceiver.c      | 105 +++++++++++++++++-
 tools/testing/selftests/bpf/xskxceiver.h      |   2 +
 4 files changed, 156 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c b/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c
index ccde6a4c6319..683306db8594 100644
--- a/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c
+++ b/tools/testing/selftests/bpf/progs/xsk_xdp_progs.c
@@ -4,6 +4,8 @@
 #include <linux/bpf.h>
 #include <bpf/bpf_helpers.h>
 #include <linux/if_ether.h>
+#include <linux/ip.h>
+#include <linux/errno.h>
 #include "xsk_xdp_common.h"
 
 struct {
@@ -14,6 +16,7 @@ struct {
 } xsk SEC(".maps");
 
 static unsigned int idx;
+int adjust_value = 0;
 int count = 0;
 
 SEC("xdp.frags") int xsk_def_prog(struct xdp_md *xdp)
@@ -70,4 +73,51 @@ SEC("xdp") int xsk_xdp_shared_umem(struct xdp_md *xdp)
 	return bpf_redirect_map(&xsk, idx, XDP_DROP);
 }
 
+SEC("xdp.frags") int xsk_xdp_adjust_tail(struct xdp_md *xdp)
+{
+	__u32 buff_len, curr_buff_len;
+	int ret;
+
+	buff_len = bpf_xdp_get_buff_len(xdp);
+	if (buff_len == 0)
+		return XDP_DROP;
+
+	ret = bpf_xdp_adjust_tail(xdp, adjust_value);
+	if (ret < 0) {
+		/* Handle unsupported cases */
+		if (ret == -EOPNOTSUPP) {
+			/* Set adjust_value to -EOPNOTSUPP to indicate to userspace that this case
+			 * is unsupported
+			 */
+			adjust_value = -EOPNOTSUPP;
+			return bpf_redirect_map(&xsk, 0, XDP_DROP);
+		}
+
+		return XDP_DROP;
+	}
+
+	curr_buff_len = bpf_xdp_get_buff_len(xdp);
+	if (curr_buff_len != buff_len + adjust_value)
+		return XDP_DROP;
+
+	if (curr_buff_len > buff_len) {
+		__u32 *pkt_data = (void *)(long)xdp->data;
+		__u32 len, words_to_end, seq_num;
+
+		len = curr_buff_len - PKT_HDR_ALIGN;
+		words_to_end = len / sizeof(*pkt_data) - 1;
+		seq_num = words_to_end;
+
+		/* Convert sequence number to network byte order. Store this in the last 4 bytes of
+		 * the packet. Use 'adjust_value' to determine the position at the end of the
+		 * packet for storing the sequence number.
+		 */
+		seq_num = __constant_htonl(words_to_end);
+		bpf_xdp_store_bytes(xdp, curr_buff_len - sizeof(seq_num), &seq_num,
+				    sizeof(seq_num));
+	}
+
+	return bpf_redirect_map(&xsk, 0, XDP_DROP);
+}
+
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/xsk_xdp_common.h b/tools/testing/selftests/bpf/xsk_xdp_common.h
index 5a6f36f07383..45810ff552da 100644
--- a/tools/testing/selftests/bpf/xsk_xdp_common.h
+++ b/tools/testing/selftests/bpf/xsk_xdp_common.h
@@ -4,6 +4,7 @@
 #define XSK_XDP_COMMON_H_
 
 #define MAX_SOCKETS 2
+#define PKT_HDR_ALIGN (sizeof(struct ethhdr) + 2) /* Just to align the data in the packet */
 
 struct xdp_info {
 	__u64 count;
diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c
index d60ee6a31c09..0ced4026ee44 100644
--- a/tools/testing/selftests/bpf/xskxceiver.c
+++ b/tools/testing/selftests/bpf/xskxceiver.c
@@ -524,6 +524,8 @@ static void __test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx,
 	test->nb_sockets = 1;
 	test->fail = false;
 	test->set_ring = false;
+	test->adjust_tail = false;
+	test->adjust_tail_support = false;
 	test->mtu = MAX_ETH_PKT_SIZE;
 	test->xdp_prog_rx = ifobj_rx->xdp_progs->progs.xsk_def_prog;
 	test->xskmap_rx = ifobj_rx->xdp_progs->maps.xsk;
@@ -992,6 +994,31 @@ static bool is_metadata_correct(struct pkt *pkt, void *buffer, u64 addr)
 	return true;
 }
 
+static bool is_adjust_tail_supported(struct xsk_xdp_progs *skel_rx)
+{
+	struct bpf_map *data_map;
+	int adjust_value = 0;
+	int key = 0;
+	int ret;
+
+	data_map = bpf_object__find_map_by_name(skel_rx->obj, "xsk_xdp_.bss");
+	if (!data_map || !bpf_map__is_internal(data_map)) {
+		ksft_print_msg("Error: could not find bss section of XDP program\n");
+		exit_with_error(errno);
+	}
+
+	ret = bpf_map_lookup_elem(bpf_map__fd(data_map), &key, &adjust_value);
+	if (ret) {
+		ksft_print_msg("Error: bpf_map_lookup_elem failed with error %d\n", ret);
+		exit_with_error(errno);
+	}
+
+	/* Set the 'adjust_value' variable to -EOPNOTSUPP in the XDP program if the adjust_tail
+	 * helper is not supported. Skip the adjust_tail test case in this scenario.
+	 */
+	return adjust_value != -EOPNOTSUPP;
+}
+
 static bool is_frag_valid(struct xsk_umem_info *umem, u64 addr, u32 len, u32 expected_pkt_nb,
 			  u32 bytes_processed)
 {
@@ -1768,8 +1795,13 @@ static void *worker_testapp_validate_rx(void *arg)
 
 	if (!err && ifobject->validation_func)
 		err = ifobject->validation_func(ifobject);
-	if (err)
-		report_failure(test);
+
+	if (err) {
+		if (test->adjust_tail && !is_adjust_tail_supported(ifobject->xdp_progs))
+			test->adjust_tail_support = false;
+		else
+			report_failure(test);
+	}
 
 	pthread_exit(NULL);
 }
@@ -2516,6 +2548,71 @@ static int testapp_hw_sw_max_ring_size(struct test_spec *test)
 	return testapp_validate_traffic(test);
 }
 
+static int testapp_xdp_adjust_tail(struct test_spec *test, int adjust_value)
+{
+	struct xsk_xdp_progs *skel_rx = test->ifobj_rx->xdp_progs;
+	struct xsk_xdp_progs *skel_tx = test->ifobj_tx->xdp_progs;
+
+	test_spec_set_xdp_prog(test, skel_rx->progs.xsk_xdp_adjust_tail,
+			       skel_tx->progs.xsk_xdp_adjust_tail,
+			       skel_rx->maps.xsk, skel_tx->maps.xsk);
+
+	skel_rx->bss->adjust_value = adjust_value;
+
+	return testapp_validate_traffic(test);
+}
+
+static int testapp_adjust_tail(struct test_spec *test, u32 value, u32 pkt_len)
+{
+	int ret;
+
+	test->adjust_tail_support = true;
+	test->adjust_tail = true;
+	test->total_steps = 1;
+
+	pkt_stream_replace_ifobject(test->ifobj_tx, DEFAULT_BATCH_SIZE, pkt_len);
+	pkt_stream_replace_ifobject(test->ifobj_rx, DEFAULT_BATCH_SIZE, pkt_len + value);
+
+	ret = testapp_xdp_adjust_tail(test, value);
+	if (ret)
+		return ret;
+
+	if (!test->adjust_tail_support) {
+		ksft_test_result_skip("%s %sResize pkt with bpf_xdp_adjust_tail() not supported\n",
+				      mode_string(test), busy_poll_string(test));
+		return TEST_SKIP;
+	}
+
+	return 0;
+}
+
+static int testapp_adjust_tail_shrink(struct test_spec *test)
+{
+	/* Shrink by 4 bytes for testing purpose */
+	return testapp_adjust_tail(test, -4, MIN_PKT_SIZE * 2);
+}
+
+static int testapp_adjust_tail_shrink_mb(struct test_spec *test)
+{
+	test->mtu = MAX_ETH_JUMBO_SIZE;
+	/* Shrink by the frag size */
+	return testapp_adjust_tail(test, -XSK_UMEM__MAX_FRAME_SIZE, XSK_UMEM__LARGE_FRAME_SIZE * 2);
+}
+
+static int testapp_adjust_tail_grow(struct test_spec *test)
+{
+	/* Grow by 4 bytes for testing purpose */
+	return testapp_adjust_tail(test, 4, MIN_PKT_SIZE * 2);
+}
+
+static int testapp_adjust_tail_grow_mb(struct test_spec *test)
+{
+	test->mtu = MAX_ETH_JUMBO_SIZE;
+	/* Grow by (frag_size - last_frag_Size) - 1 to stay inside the last fragment */
+	return testapp_adjust_tail(test, (XSK_UMEM__MAX_FRAME_SIZE / 2) - 1,
+				   XSK_UMEM__LARGE_FRAME_SIZE * 2);
+}
+
 static void run_pkt_test(struct test_spec *test)
 {
 	int ret;
@@ -2622,6 +2719,10 @@ static const struct test_spec tests[] = {
 	{.name = "TOO_MANY_FRAGS", .test_func = testapp_too_many_frags},
 	{.name = "HW_SW_MIN_RING_SIZE", .test_func = testapp_hw_sw_min_ring_size},
 	{.name = "HW_SW_MAX_RING_SIZE", .test_func = testapp_hw_sw_max_ring_size},
+	{.name = "XDP_ADJUST_TAIL_SHRINK", .test_func = testapp_adjust_tail_shrink},
+	{.name = "XDP_ADJUST_TAIL_SHRINK_MULTI_BUFF", .test_func = testapp_adjust_tail_shrink_mb},
+	{.name = "XDP_ADJUST_TAIL_GROW", .test_func = testapp_adjust_tail_grow},
+	{.name = "XDP_ADJUST_TAIL_GROW_MULTI_BUFF", .test_func = testapp_adjust_tail_grow_mb},
 	};
 
 static void print_tests(void)
diff --git a/tools/testing/selftests/bpf/xskxceiver.h b/tools/testing/selftests/bpf/xskxceiver.h
index e46e823f6a1a..67fc44b2813b 100644
--- a/tools/testing/selftests/bpf/xskxceiver.h
+++ b/tools/testing/selftests/bpf/xskxceiver.h
@@ -173,6 +173,8 @@ struct test_spec {
 	u16 nb_sockets;
 	bool fail;
 	bool set_ring;
+	bool adjust_tail;
+	bool adjust_tail_support;
 	enum test_mode mode;
 	char name[MAX_TEST_NAME_SIZE];
 };
-- 
2.34.1