From: Vinod Koul <vkoul@kernel.org>
To: Sean Anderson <sean.anderson@seco.com>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>,
linux-phy@lists.infradead.org,
Madalin Bucur <madalin.bucur@nxp.com>,
linux-arm-kernel@lists.infradead.org,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linuxppc-dev@lists.ozlabs.org,
Bagas Sanjaya <bagasdotme@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Jonathan Corbet <corbet@lwn.net>,
linux-doc@vger.kernel.org
Subject: Re: [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver
Date: Tue, 16 May 2023 19:06:38 +0530 [thread overview]
Message-ID: <ZGOG5iwINTcFABHB@matsya> (raw)
In-Reply-To: <957a6bb4-f07b-f511-72c9-da4199dc8616@seco.com>
On 08-05-23, 11:28, Sean Anderson wrote:
> On 5/8/23 05:22, Vinod Koul wrote:
> > On 13-04-23, 12:05, Sean Anderson wrote:
> >> +static const struct lynx_cfg ls1088a_cfg = {
> >> + .lanes = 4,
> >> + .endian = REGMAP_ENDIAN_LITTLE,
> >> + .mode_conflict = lynx_ls_mode_conflict,
> >> + .mode_apply = lynx_ls_mode_apply,
> >> + .mode_init = lynx_ls_mode_init,
> >
> > So you have cfg with mode_xxx pointing to same functions for both of the
> > versions you support... so question is why do this and not call the
> > functions directly?
>
> The intention is to make it easy to add support for T-series processors,
> which have a different PCCR layout.
And when is that going to come. I would prefer this to be added when we
have users being added
--
~Vinod
WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Sean Anderson <sean.anderson@seco.com>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>,
linux-phy@lists.infradead.org,
Madalin Bucur <madalin.bucur@nxp.com>,
linux-arm-kernel@lists.infradead.org,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linuxppc-dev@lists.ozlabs.org,
Bagas Sanjaya <bagasdotme@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Jonathan Corbet <corbet@lwn.net>,
linux-doc@vger.kernel.org
Subject: Re: [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver
Date: Tue, 16 May 2023 19:06:38 +0530 [thread overview]
Message-ID: <ZGOG5iwINTcFABHB@matsya> (raw)
In-Reply-To: <957a6bb4-f07b-f511-72c9-da4199dc8616@seco.com>
On 08-05-23, 11:28, Sean Anderson wrote:
> On 5/8/23 05:22, Vinod Koul wrote:
> > On 13-04-23, 12:05, Sean Anderson wrote:
> >> +static const struct lynx_cfg ls1088a_cfg = {
> >> + .lanes = 4,
> >> + .endian = REGMAP_ENDIAN_LITTLE,
> >> + .mode_conflict = lynx_ls_mode_conflict,
> >> + .mode_apply = lynx_ls_mode_apply,
> >> + .mode_init = lynx_ls_mode_init,
> >
> > So you have cfg with mode_xxx pointing to same functions for both of the
> > versions you support... so question is why do this and not call the
> > functions directly?
>
> The intention is to make it easy to add support for T-series processors,
> which have a different PCCR layout.
And when is that going to come. I would prefer this to be added when we
have users being added
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Sean Anderson <sean.anderson@seco.com>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>,
devicetree@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Madalin Bucur <madalin.bucur@nxp.com>,
Jonathan Corbet <corbet@lwn.net>,
linux-doc@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
Bagas Sanjaya <bagasdotme@gmail.com>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
linux-phy@lists.infradead.org, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver
Date: Tue, 16 May 2023 19:06:38 +0530 [thread overview]
Message-ID: <ZGOG5iwINTcFABHB@matsya> (raw)
In-Reply-To: <957a6bb4-f07b-f511-72c9-da4199dc8616@seco.com>
On 08-05-23, 11:28, Sean Anderson wrote:
> On 5/8/23 05:22, Vinod Koul wrote:
> > On 13-04-23, 12:05, Sean Anderson wrote:
> >> +static const struct lynx_cfg ls1088a_cfg = {
> >> + .lanes = 4,
> >> + .endian = REGMAP_ENDIAN_LITTLE,
> >> + .mode_conflict = lynx_ls_mode_conflict,
> >> + .mode_apply = lynx_ls_mode_apply,
> >> + .mode_init = lynx_ls_mode_init,
> >
> > So you have cfg with mode_xxx pointing to same functions for both of the
> > versions you support... so question is why do this and not call the
> > functions directly?
>
> The intention is to make it easy to add support for T-series processors,
> which have a different PCCR layout.
And when is that going to come. I would prefer this to be added when we
have users being added
--
~Vinod
WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Sean Anderson <sean.anderson@seco.com>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>,
linux-phy@lists.infradead.org,
Madalin Bucur <madalin.bucur@nxp.com>,
linux-arm-kernel@lists.infradead.org,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linuxppc-dev@lists.ozlabs.org,
Bagas Sanjaya <bagasdotme@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Jonathan Corbet <corbet@lwn.net>,
linux-doc@vger.kernel.org
Subject: Re: [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver
Date: Tue, 16 May 2023 19:06:38 +0530 [thread overview]
Message-ID: <ZGOG5iwINTcFABHB@matsya> (raw)
In-Reply-To: <957a6bb4-f07b-f511-72c9-da4199dc8616@seco.com>
On 08-05-23, 11:28, Sean Anderson wrote:
> On 5/8/23 05:22, Vinod Koul wrote:
> > On 13-04-23, 12:05, Sean Anderson wrote:
> >> +static const struct lynx_cfg ls1088a_cfg = {
> >> + .lanes = 4,
> >> + .endian = REGMAP_ENDIAN_LITTLE,
> >> + .mode_conflict = lynx_ls_mode_conflict,
> >> + .mode_apply = lynx_ls_mode_apply,
> >> + .mode_init = lynx_ls_mode_init,
> >
> > So you have cfg with mode_xxx pointing to same functions for both of the
> > versions you support... so question is why do this and not call the
> > functions directly?
>
> The intention is to make it easy to add support for T-series processors,
> which have a different PCCR layout.
And when is that going to come. I would prefer this to be added when we
have users being added
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-05-16 13:36 UTC|newest]
Thread overview: 249+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-13 16:05 [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` [PATCH v14 01/15] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` [PATCH v14 02/15] dt-bindings: phy: Add Lynx 10G phy binding Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` [PATCH v14 03/15] dt-bindings: Convert gpio-mmio to yaml Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-18 20:37 ` Rob Herring
2023-04-18 20:37 ` Rob Herring
2023-04-18 20:37 ` Rob Herring
2023-04-18 20:37 ` Rob Herring
2023-05-11 9:18 ` Bartosz Golaszewski
2023-05-11 9:18 ` Bartosz Golaszewski
2023-05-11 9:18 ` Bartosz Golaszewski
2023-04-13 16:05 ` [PATCH v14 04/15] dt-bindings: gpio-mmio: Add compatible for QIXIS Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` [PATCH v14 05/15] dt-bindings: clock: Add ids for Lynx 10g PLLs Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` [PATCH v14 06/15] clk: Add Lynx 10G SerDes PLL driver Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-05-08 9:15 ` Vinod Koul
2023-05-08 9:15 ` Vinod Koul
2023-05-08 9:15 ` Vinod Koul
2023-05-08 15:31 ` Sean Anderson
2023-05-08 15:31 ` Sean Anderson
2023-05-08 15:31 ` Sean Anderson
2023-05-09 13:00 ` Vinod Koul
2023-05-09 13:00 ` Vinod Koul
2023-05-09 13:00 ` Vinod Koul
2023-05-09 15:26 ` Sean Anderson
2023-05-09 15:26 ` Sean Anderson
2023-05-09 15:26 ` Sean Anderson
2023-05-16 13:22 ` Vinod Koul
2023-05-16 13:22 ` Vinod Koul
2023-05-16 13:22 ` Vinod Koul
2023-05-16 13:22 ` Vinod Koul
2023-05-16 15:11 ` Sean Anderson
2023-05-16 15:11 ` Sean Anderson
2023-05-16 15:11 ` Sean Anderson
2023-05-16 15:11 ` Sean Anderson
2023-05-16 16:32 ` Vinod Koul
2023-05-16 16:32 ` Vinod Koul
2023-05-16 16:32 ` Vinod Koul
2023-05-16 16:32 ` Vinod Koul
2023-04-13 16:05 ` [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-04-13 16:05 ` Sean Anderson
2023-05-08 9:22 ` Vinod Koul
2023-05-08 9:22 ` Vinod Koul
2023-05-08 9:22 ` Vinod Koul
2023-05-08 15:28 ` Sean Anderson
2023-05-08 15:28 ` Sean Anderson
2023-05-08 15:28 ` Sean Anderson
2023-05-16 13:36 ` Vinod Koul [this message]
2023-05-16 13:36 ` Vinod Koul
2023-05-16 13:36 ` Vinod Koul
2023-05-16 13:36 ` Vinod Koul
2023-05-16 15:12 ` Sean Anderson
2023-05-16 15:12 ` Sean Anderson
2023-05-16 15:12 ` Sean Anderson
2023-05-16 15:12 ` Sean Anderson
2023-04-13 16:06 ` [PATCH v14 08/15] phy: lynx10g: Enable by default on Layerscape Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` [PATCH v14 09/15] arm64: dts: ls1046a: Add serdes nodes Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` [PATCH v14 10/15] arm64: dts: ls1046ardb: Add serdes descriptions Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` [PATCH v14 11/15] arm64: dts: ls1088a: Add serdes nodes Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` [PATCH v14 12/15] arm64: dts: ls1088a: Prevent PCSs from probing as phys Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` [PATCH v14 13/15] arm64: dts: ls1088ardb: Remove aquantia interrupt Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` [PATCH v14 14/15] arm64: dts: ls1088ardb: Add SFP cage Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` [PATCH v14 15/15] arm64: dts: ls1088ardb: Add serdes descriptions Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-13 16:06 ` Sean Anderson
2023-04-25 19:50 ` [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes Vladimir Oltean
2023-04-25 19:50 ` Vladimir Oltean
2023-04-25 19:50 ` Vladimir Oltean
2023-04-25 19:50 ` Vladimir Oltean
2023-04-25 20:22 ` Sean Anderson
2023-04-25 20:22 ` Sean Anderson
2023-04-25 20:22 ` Sean Anderson
2023-04-25 20:22 ` Sean Anderson
2023-04-26 10:51 ` Vladimir Oltean
2023-04-26 10:51 ` Vladimir Oltean
2023-04-26 10:51 ` Vladimir Oltean
2023-04-26 10:51 ` Vladimir Oltean
2023-04-26 14:50 ` Sean Anderson
2023-04-26 14:50 ` Sean Anderson
2023-04-26 14:50 ` Sean Anderson
2023-04-26 14:50 ` Sean Anderson
2023-04-29 17:24 ` Vladimir Oltean
2023-04-29 17:24 ` Vladimir Oltean
2023-04-29 17:24 ` Vladimir Oltean
2023-04-29 17:24 ` Vladimir Oltean
2023-05-01 15:03 ` Sean Anderson
2023-05-01 15:03 ` Sean Anderson
2023-05-01 15:03 ` Sean Anderson
2023-05-01 15:03 ` Sean Anderson
2023-05-22 14:42 ` Sean Anderson
2023-05-22 14:42 ` Sean Anderson
2023-05-22 14:42 ` Sean Anderson
2023-05-22 14:42 ` Sean Anderson
2023-05-22 15:00 ` Vladimir Oltean
2023-05-22 15:00 ` Vladimir Oltean
2023-05-22 15:00 ` Vladimir Oltean
2023-05-22 15:00 ` Vladimir Oltean
2023-06-09 19:19 ` Sean Anderson
2023-06-09 19:19 ` Sean Anderson
2023-06-09 19:19 ` Sean Anderson
2023-06-09 19:19 ` Sean Anderson
2023-06-10 22:21 ` Vladimir Oltean
2023-06-10 22:21 ` Vladimir Oltean
2023-06-10 22:21 ` Vladimir Oltean
2023-06-12 14:35 ` Sean Anderson
2023-06-12 14:35 ` Sean Anderson
2023-06-12 14:35 ` Sean Anderson
2023-06-12 14:35 ` Sean Anderson
2023-06-12 16:33 ` Vladimir Oltean
2023-06-12 16:33 ` Vladimir Oltean
2023-06-12 16:33 ` Vladimir Oltean
2023-06-12 16:33 ` Vladimir Oltean
2023-06-12 20:46 ` Sean Anderson
2023-06-12 20:46 ` Sean Anderson
2023-06-12 20:46 ` Sean Anderson
2023-06-12 20:46 ` Sean Anderson
2023-06-13 14:27 ` Vladimir Oltean
2023-06-13 14:27 ` Vladimir Oltean
2023-06-13 14:27 ` Vladimir Oltean
2023-06-13 14:27 ` Vladimir Oltean
2023-08-10 10:26 ` Vladimir Oltean
2023-08-10 10:26 ` Vladimir Oltean
2023-08-10 10:26 ` Vladimir Oltean
2023-08-10 10:26 ` Vladimir Oltean
2023-08-10 19:58 ` Sean Anderson
2023-08-10 19:58 ` Sean Anderson
2023-08-10 19:58 ` Sean Anderson
2023-08-10 19:58 ` Sean Anderson
2023-08-11 16:12 ` Vladimir Oltean
2023-08-11 16:12 ` Vladimir Oltean
2023-08-11 16:12 ` Vladimir Oltean
2023-08-11 16:12 ` Vladimir Oltean
2023-09-13 22:02 ` Vladimir Oltean
2023-09-13 22:02 ` Vladimir Oltean
2023-09-13 22:02 ` Vladimir Oltean
2023-09-13 22:02 ` Vladimir Oltean
2023-08-11 15:08 ` Vladimir Oltean
2023-08-11 15:08 ` Vladimir Oltean
2023-08-11 15:08 ` Vladimir Oltean
2023-08-11 15:08 ` Vladimir Oltean
2023-08-11 15:43 ` Sean Anderson
2023-08-11 15:43 ` Sean Anderson
2023-08-11 15:43 ` Sean Anderson
2023-08-11 15:43 ` Sean Anderson
2023-08-11 16:36 ` Vladimir Oltean
2023-08-11 16:36 ` Vladimir Oltean
2023-08-11 16:36 ` Vladimir Oltean
2023-08-11 16:36 ` Vladimir Oltean
2023-08-21 12:49 ` Vladimir Oltean
2023-08-21 12:49 ` Vladimir Oltean
2023-08-21 12:49 ` Vladimir Oltean
2023-08-21 12:49 ` Vladimir Oltean
2023-08-21 17:45 ` Sean Anderson
2023-08-21 17:45 ` Sean Anderson
2023-08-21 17:45 ` Sean Anderson
2023-08-21 17:45 ` Sean Anderson
2023-08-21 18:13 ` Ioana Ciornei
2023-08-21 18:13 ` Ioana Ciornei
2023-08-21 18:13 ` Ioana Ciornei
2023-08-21 18:13 ` Ioana Ciornei
2023-08-21 18:20 ` Vladimir Oltean
2023-08-21 18:20 ` Vladimir Oltean
2023-08-21 18:20 ` Vladimir Oltean
2023-08-21 18:20 ` Vladimir Oltean
2023-08-21 18:46 ` Sean Anderson
2023-08-21 18:46 ` Sean Anderson
2023-08-21 18:46 ` Sean Anderson
2023-08-21 18:46 ` Sean Anderson
2023-08-21 19:58 ` Vladimir Oltean
2023-08-21 19:58 ` Vladimir Oltean
2023-08-21 19:58 ` Vladimir Oltean
2023-08-21 19:58 ` Vladimir Oltean
2023-08-21 21:06 ` Sean Anderson
2023-08-21 21:06 ` Sean Anderson
2023-08-21 21:06 ` Sean Anderson
2023-08-21 21:06 ` Sean Anderson
2023-08-21 22:48 ` Vladimir Oltean
2023-08-21 22:48 ` Vladimir Oltean
2023-08-21 22:48 ` Vladimir Oltean
2023-08-21 22:48 ` Vladimir Oltean
2023-08-21 23:39 ` Sean Anderson
2023-08-21 23:39 ` Sean Anderson
2023-08-21 23:39 ` Sean Anderson
2023-08-21 23:39 ` Sean Anderson
2023-08-21 23:59 ` Vladimir Oltean
2023-08-21 23:59 ` Vladimir Oltean
2023-08-21 23:59 ` Vladimir Oltean
2023-08-21 23:59 ` Vladimir Oltean
2023-08-24 22:09 ` Sean Anderson
2023-08-24 22:09 ` Sean Anderson
2023-08-24 22:09 ` Sean Anderson
2023-08-24 22:09 ` Sean Anderson
2023-08-25 14:43 ` Vladimir Oltean
2023-08-25 14:43 ` Vladimir Oltean
2023-08-25 14:43 ` Vladimir Oltean
2023-08-25 14:43 ` Vladimir Oltean
2023-08-22 14:55 ` Ioana Ciornei
2023-08-22 14:55 ` Ioana Ciornei
2023-08-22 14:55 ` Ioana Ciornei
2023-08-22 14:55 ` Ioana Ciornei
2023-08-24 20:54 ` Sean Anderson
2023-08-24 20:54 ` Sean Anderson
2023-08-24 20:54 ` Sean Anderson
2023-08-24 20:54 ` Sean Anderson
-- strict thread matches above, loose matches on Subject: below --
2023-04-17 3:00 [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZGOG5iwINTcFABHB@matsya \
--to=vkoul@kernel.org \
--cc=bagasdotme@gmail.com \
--cc=camelia.groza@nxp.com \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=ioana.ciornei@nxp.com \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@nxp.com \
--cc=robh+dt@kernel.org \
--cc=sean.anderson@seco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.