All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Watts <contact@jookia.org>
To: Andre Przywara <andre.przywara@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>, Lee Jones <lee@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sunxi@lists.linux.dev,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Ryan Walklin <ryan@testtoast.com>,
	Chris Morgan <macroalpha82@gmail.com>
Subject: Re: [PATCH v2 2/5] regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
Date: Tue, 23 Apr 2024 10:09:12 +1000	[thread overview]
Message-ID: <Zib8KOXwqJT3ftHm@titan> (raw)
In-Reply-To: <20240418000736.24338-3-andre.przywara@arm.com>

On Thu, Apr 18, 2024 at 01:07:33AM +0100, Andre Przywara wrote:
> The X-Powers AXP717 PMIC has separate input supply pins for each group
> of LDOs, so they are not all using the same DCDC1 input, as described
> currently.
> 
> Replace the "supply" member of each LDO description with the respective
> group supply name, so that the supply dependencies can be correctly
> described in the devicetree.
> 
> Also fix two off-by-ones in the regulator macros, after some double
> checking the numbers against the datasheet. This uncovered a bug in the
> datasheet: add a comment to document this.

Hi,

This looks a lot better with the comment.

John.

Reviewed-by: John Watts <contact@jookia.org>

> 
> Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717")
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  drivers/regulator/axp20x-regulator.c | 33 ++++++++++++++++------------
>  1 file changed, 19 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
> index 34fcdd82b2eaa..f3c447ecdc3bf 100644
> --- a/drivers/regulator/axp20x-regulator.c
> +++ b/drivers/regulator/axp20x-regulator.c
> @@ -140,7 +140,7 @@
>  
>  #define AXP717_DCDC1_NUM_VOLTAGES	88
>  #define AXP717_DCDC2_NUM_VOLTAGES	107
> -#define AXP717_DCDC3_NUM_VOLTAGES	104
> +#define AXP717_DCDC3_NUM_VOLTAGES	103
>  #define AXP717_DCDC_V_OUT_MASK		GENMASK(6, 0)
>  #define AXP717_LDO_V_OUT_MASK		GENMASK(4, 0)
>  
> @@ -763,10 +763,15 @@ static const struct linear_range axp717_dcdc1_ranges[] = {
>  	REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
>  };
>  
> +/*
> + * The manual says that the last voltage is 3.4V, encoded as 0b1101011 (107),
> + * but every other method proves that this is wrong, so it's really 106 that
> + * programs the final 3.4V.
> + */
>  static const struct linear_range axp717_dcdc2_ranges[] = {
>  	REGULATOR_LINEAR_RANGE(500000,   0,  70,  10000),
>  	REGULATOR_LINEAR_RANGE(1220000, 71,  87,  20000),
> -	REGULATOR_LINEAR_RANGE(1600000, 88, 107, 100000),
> +	REGULATOR_LINEAR_RANGE(1600000, 88, 106, 100000),
>  };
>  
>  static const struct linear_range axp717_dcdc3_ranges[] = {
> @@ -790,40 +795,40 @@ static const struct regulator_desc axp717_regulators[] = {
>  	AXP_DESC(AXP717, DCDC4, "dcdc4", "vin4", 1000, 3700, 100,
>  		 AXP717_DCDC4_CONTROL, AXP717_DCDC_V_OUT_MASK,
>  		 AXP717_DCDC_OUTPUT_CONTROL, BIT(3)),
> -	AXP_DESC(AXP717, ALDO1, "aldo1", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, ALDO1, "aldo1", "aldoin", 500, 3500, 100,
>  		 AXP717_ALDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO0_OUTPUT_CONTROL, BIT(0)),
> -	AXP_DESC(AXP717, ALDO2, "aldo2", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, ALDO2, "aldo2", "aldoin", 500, 3500, 100,
>  		 AXP717_ALDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO0_OUTPUT_CONTROL, BIT(1)),
> -	AXP_DESC(AXP717, ALDO3, "aldo3", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, ALDO3, "aldo3", "aldoin", 500, 3500, 100,
>  		 AXP717_ALDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO0_OUTPUT_CONTROL, BIT(2)),
> -	AXP_DESC(AXP717, ALDO4, "aldo4", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, ALDO4, "aldo4", "aldoin", 500, 3500, 100,
>  		 AXP717_ALDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO0_OUTPUT_CONTROL, BIT(3)),
> -	AXP_DESC(AXP717, BLDO1, "bldo1", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, BLDO1, "bldo1", "bldoin", 500, 3500, 100,
>  		 AXP717_BLDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO0_OUTPUT_CONTROL, BIT(4)),
> -	AXP_DESC(AXP717, BLDO2, "bldo2", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, BLDO2, "bldo2", "bldoin", 500, 3500, 100,
>  		 AXP717_BLDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO0_OUTPUT_CONTROL, BIT(5)),
> -	AXP_DESC(AXP717, BLDO3, "bldo3", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, BLDO3, "bldo3", "bldoin", 500, 3500, 100,
>  		 AXP717_BLDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO0_OUTPUT_CONTROL, BIT(6)),
> -	AXP_DESC(AXP717, BLDO4, "bldo4", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, BLDO4, "bldo4", "bldoin", 500, 3500, 100,
>  		 AXP717_BLDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO0_OUTPUT_CONTROL, BIT(7)),
> -	AXP_DESC(AXP717, CLDO1, "cldo1", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, CLDO1, "cldo1", "cldoin", 500, 3500, 100,
>  		 AXP717_CLDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO1_OUTPUT_CONTROL, BIT(0)),
> -	AXP_DESC(AXP717, CLDO2, "cldo2", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, CLDO2, "cldo2", "cldoin", 500, 3500, 100,
>  		 AXP717_CLDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO1_OUTPUT_CONTROL, BIT(1)),
> -	AXP_DESC(AXP717, CLDO3, "cldo3", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, CLDO3, "cldo3", "cldoin", 500, 3500, 100,
>  		 AXP717_CLDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO1_OUTPUT_CONTROL, BIT(2)),
> -	AXP_DESC(AXP717, CLDO4, "cldo4", "vin1", 500, 3500, 100,
> +	AXP_DESC(AXP717, CLDO4, "cldo4", "cldoin", 500, 3500, 100,
>  		 AXP717_CLDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
>  		 AXP717_LDO1_OUTPUT_CONTROL, BIT(3)),
>  	AXP_DESC(AXP717, CPUSLDO, "cpusldo", "vin1", 500, 1400, 50,
> -- 
> 2.35.8
> 

  reply	other threads:[~2024-04-23  0:10 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-18  0:07 [PATCH v2 0/5] regulator: Fix AXP717 PMIC support Andre Przywara
2024-04-18  0:07 ` [PATCH v2 1/5] mfd: axp20x: AXP717: Fix missing IRQ status registers range Andre Przywara
2024-04-23  0:16   ` John Watts
2024-05-02  9:39   ` Lee Jones
2024-06-12 15:07     ` Andre Przywara
2024-06-12 15:25       ` Lee Jones
2024-06-12 15:34         ` Andre Przywara
2024-06-12 15:48           ` Lee Jones
2024-06-13  9:48             ` Andre Przywara
2024-06-13 12:04               ` Lee Jones
2024-04-18  0:07 ` [PATCH v2 2/5] regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones Andre Przywara
2024-04-23  0:09   ` John Watts [this message]
2024-06-12 14:40   ` Andre Przywara
2024-06-14  8:12     ` Lee Jones
2024-06-14 10:01       ` Andre Przywara
2024-04-18  0:07 ` [PATCH v2 3/5] dt-bindings: mfd: x-powers,axp152: add boost regulator Andre Przywara
2024-05-02  9:39   ` Lee Jones
2024-04-18  0:07 ` [PATCH v2 4/5] mfd: axp20x: AXP717: Add support for " Andre Przywara
2024-05-02  9:39   ` Lee Jones
2024-05-22 18:54   ` Chris Morgan
2024-04-18  0:07 ` [PATCH v2 5/5] regulator: axp20x: AXP717: Add " Andre Przywara
2024-04-23  5:19 ` [PATCH v2 0/5] regulator: Fix AXP717 PMIC support Mark Brown
2024-05-02  9:38   ` Lee Jones
2024-05-06 15:29     ` Mark Brown
2024-04-28  8:41 ` Ryan Walklin
2024-05-02  9:37   ` Lee Jones
2024-05-06 15:26 ` Mark Brown
2024-05-06 15:29 ` Mark Brown
2024-06-14  9:24 ` (subset) " Mark Brown
2024-08-01 15:22 ` Chen-Yu Tsai
2024-08-05 14:21   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zib8KOXwqJT3ftHm@titan \
    --to=contact@jookia.org \
    --cc=andre.przywara@arm.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=macroalpha82@gmail.com \
    --cc=robh@kernel.org \
    --cc=ryan@testtoast.com \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.