From: Jisheng Zhang <jszhang@kernel.org>
To: Yangyu Chen <cyy@cyyself.name>
Cc: linux-riscv@lists.infradead.org,
Conor Dooley <conor+dt@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Samuel Holland <samuel.holland@sifive.com>,
Anup Patel <anup.patel@wdc.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 7/9] riscv: dts: add initial SpacemiT K1 SoC device tree
Date: Mon, 17 Jun 2024 20:49:57 +0800 [thread overview]
Message-ID: <ZnAw9QrSD-svYqQ5@xhacker> (raw)
In-Reply-To: <tencent_701082E2DAE48E2FB857316321778D737C08@qq.com>
On Mon, Jun 17, 2024 at 01:20:52AM +0800, Yangyu Chen wrote:
> Banana Pi BPI-F3 motherboard is powered by SpacemiT K1[1].
>
> Key features:
> - 4 cores per cluster, 2 clusters on chip
> - UART IP is Intel XScale UART
>
> Some key considerations:
> - ISA string is inferred from vendor documentation[2]
> - Cluster topology is inferred from datasheet[1] and L2 in vendor dts[3]
> - No coherent DMA on this board
> Inferred by taking vendor ethernet and MMC drivers to the mainline
> kernel. Without dma-noncoherent in soc node, the driver fails.
> - No cache nodes now
> The parameters from vendor dts are likely to be wrong. It has 512
> sets for a 32KiB L1 Cache. In this case, each set is 64B in size.
> When the size of the cache line is 64B, it is a directly mapped
> cache rather than a set-associative cache, the latter is commonly
> used. Thus, I didn't use the parameters from vendor dts.
>
> Currently only support booting into console with only uart, other
> features will be added soon later.
Hi Yangyu,
Per recent practice of cv1800b and th1520 upstream, I think a complete
initial support would include pinctrl, clk and reset, I have received
the complains from the community. So can you please bring the pinctrl
clk and reset at the same time?
Thanks
>
> [1] https://docs.banana-pi.org/en/BPI-F3/SpacemiT_K1_datasheet
> [2] https://developer.spacemit.com/#/documentation?token=BWbGwbx7liGW21kq9lucSA6Vnpb
> [3] https://gitee.com/bianbu-linux/linux-6.1/blob/bl-v1.0.y/arch/riscv/boot/dts/spacemit/k1-x.dtsi
>
> Signed-off-by: Yangyu Chen <cyy@cyyself.name>
> ---
> arch/riscv/boot/dts/spacemit/k1.dtsi | 281 +++++++++++++++++++++++++++
> 1 file changed, 281 insertions(+)
> create mode 100644 arch/riscv/boot/dts/spacemit/k1.dtsi
>
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> new file mode 100644
> index 000000000000..58f9e143c659
> --- /dev/null
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -0,0 +1,281 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
> + */
> +
> +/dts-v1/;
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + model = "SpacemiT K1";
> + compatible = "spacemit,k1";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + timebase-frequency = <10000000>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu_0>;
> + };
> + core1 {
> + cpu = <&cpu_1>;
> + };
> + core2 {
> + cpu = <&cpu_2>;
> + };
> + core3 {
> + cpu = <&cpu_3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpu_4>;
> + };
> + core1 {
> + cpu = <&cpu_5>;
> + };
> + core2 {
> + cpu = <&cpu_6>;
> + };
> + core3 {
> + cpu = <&cpu_7>;
> + };
> + };
> + };
> +
> + cpu_0: cpu@0 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <0>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_1: cpu@1 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <1>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_2: cpu@2 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <2>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_3: cpu@3 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <3>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_4: cpu@4 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <4>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_5: cpu@5 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <5>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu5_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_6: cpu@6 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <6>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu6_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_7: cpu@7 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <7>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu7_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + dma-noncoherent;
> + ranges;
> +
> + plic: interrupt-controller@e0000000 {
> + compatible = "spacemit,k1-plic", "riscv,plic0";
> + reg = <0x0 0xe0000000 0x0 0x4000000>;
> + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
> + <&cpu1_intc 11>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu2_intc 9>,
> + <&cpu3_intc 11>, <&cpu3_intc 9>,
> + <&cpu4_intc 11>, <&cpu4_intc 9>,
> + <&cpu5_intc 11>, <&cpu5_intc 9>,
> + <&cpu6_intc 11>, <&cpu6_intc 9>,
> + <&cpu7_intc 11>, <&cpu7_intc 9>;
> + interrupt-controller;
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + riscv,ndev = <159>;
> + };
> +
> + clint: timer@e4000000 {
> + compatible = "spacemit,k1-clint", "riscv,clint0";
> + reg = <0x0 0xe4000000 0x0 010000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>,
> + <&cpu5_intc 3>, <&cpu5_intc 7>,
> + <&cpu6_intc 3>, <&cpu6_intc 7>,
> + <&cpu7_intc 3>, <&cpu7_intc 7>;
> + };
> +
> + uart0: serial@d4017000 {
> + compatible = "intel,xscale-uart";
> + reg = <0x0 0xd4017000 0x0 0x100>;
> + interrupts = <42>;
> + clock-frequency = <14000000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> + };
> +};
> --
> 2.45.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@kernel.org>
To: Yangyu Chen <cyy@cyyself.name>
Cc: linux-riscv@lists.infradead.org,
Conor Dooley <conor+dt@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Samuel Holland <samuel.holland@sifive.com>,
Anup Patel <anup.patel@wdc.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 7/9] riscv: dts: add initial SpacemiT K1 SoC device tree
Date: Mon, 17 Jun 2024 20:49:57 +0800 [thread overview]
Message-ID: <ZnAw9QrSD-svYqQ5@xhacker> (raw)
In-Reply-To: <tencent_701082E2DAE48E2FB857316321778D737C08@qq.com>
On Mon, Jun 17, 2024 at 01:20:52AM +0800, Yangyu Chen wrote:
> Banana Pi BPI-F3 motherboard is powered by SpacemiT K1[1].
>
> Key features:
> - 4 cores per cluster, 2 clusters on chip
> - UART IP is Intel XScale UART
>
> Some key considerations:
> - ISA string is inferred from vendor documentation[2]
> - Cluster topology is inferred from datasheet[1] and L2 in vendor dts[3]
> - No coherent DMA on this board
> Inferred by taking vendor ethernet and MMC drivers to the mainline
> kernel. Without dma-noncoherent in soc node, the driver fails.
> - No cache nodes now
> The parameters from vendor dts are likely to be wrong. It has 512
> sets for a 32KiB L1 Cache. In this case, each set is 64B in size.
> When the size of the cache line is 64B, it is a directly mapped
> cache rather than a set-associative cache, the latter is commonly
> used. Thus, I didn't use the parameters from vendor dts.
>
> Currently only support booting into console with only uart, other
> features will be added soon later.
Hi Yangyu,
Per recent practice of cv1800b and th1520 upstream, I think a complete
initial support would include pinctrl, clk and reset, I have received
the complains from the community. So can you please bring the pinctrl
clk and reset at the same time?
Thanks
>
> [1] https://docs.banana-pi.org/en/BPI-F3/SpacemiT_K1_datasheet
> [2] https://developer.spacemit.com/#/documentation?token=BWbGwbx7liGW21kq9lucSA6Vnpb
> [3] https://gitee.com/bianbu-linux/linux-6.1/blob/bl-v1.0.y/arch/riscv/boot/dts/spacemit/k1-x.dtsi
>
> Signed-off-by: Yangyu Chen <cyy@cyyself.name>
> ---
> arch/riscv/boot/dts/spacemit/k1.dtsi | 281 +++++++++++++++++++++++++++
> 1 file changed, 281 insertions(+)
> create mode 100644 arch/riscv/boot/dts/spacemit/k1.dtsi
>
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> new file mode 100644
> index 000000000000..58f9e143c659
> --- /dev/null
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -0,0 +1,281 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
> + */
> +
> +/dts-v1/;
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + model = "SpacemiT K1";
> + compatible = "spacemit,k1";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + timebase-frequency = <10000000>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu_0>;
> + };
> + core1 {
> + cpu = <&cpu_1>;
> + };
> + core2 {
> + cpu = <&cpu_2>;
> + };
> + core3 {
> + cpu = <&cpu_3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpu_4>;
> + };
> + core1 {
> + cpu = <&cpu_5>;
> + };
> + core2 {
> + cpu = <&cpu_6>;
> + };
> + core3 {
> + cpu = <&cpu_7>;
> + };
> + };
> + };
> +
> + cpu_0: cpu@0 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <0>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_1: cpu@1 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <1>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_2: cpu@2 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <2>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_3: cpu@3 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <3>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_4: cpu@4 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <4>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_5: cpu@5 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <5>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu5_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_6: cpu@6 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <6>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu6_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + cpu_7: cpu@7 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <7>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu7_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + dma-noncoherent;
> + ranges;
> +
> + plic: interrupt-controller@e0000000 {
> + compatible = "spacemit,k1-plic", "riscv,plic0";
> + reg = <0x0 0xe0000000 0x0 0x4000000>;
> + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
> + <&cpu1_intc 11>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu2_intc 9>,
> + <&cpu3_intc 11>, <&cpu3_intc 9>,
> + <&cpu4_intc 11>, <&cpu4_intc 9>,
> + <&cpu5_intc 11>, <&cpu5_intc 9>,
> + <&cpu6_intc 11>, <&cpu6_intc 9>,
> + <&cpu7_intc 11>, <&cpu7_intc 9>;
> + interrupt-controller;
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + riscv,ndev = <159>;
> + };
> +
> + clint: timer@e4000000 {
> + compatible = "spacemit,k1-clint", "riscv,clint0";
> + reg = <0x0 0xe4000000 0x0 010000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>,
> + <&cpu5_intc 3>, <&cpu5_intc 7>,
> + <&cpu6_intc 3>, <&cpu6_intc 7>,
> + <&cpu7_intc 3>, <&cpu7_intc 7>;
> + };
> +
> + uart0: serial@d4017000 {
> + compatible = "intel,xscale-uart";
> + reg = <0x0 0xd4017000 0x0 0x100>;
> + interrupts = <42>;
> + clock-frequency = <14000000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> + };
> +};
> --
> 2.45.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2024-06-17 13:04 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-16 17:18 [PATCH v1 0/9] riscv: add initial support for SpacemiT K1 Yangyu Chen
2024-06-16 17:18 ` Yangyu Chen
2024-06-16 17:20 ` [PATCH v1 1/9] dt-bindings: vendor-prefixes: add spacemit Yangyu Chen
2024-06-16 17:20 ` Yangyu Chen
2024-06-18 15:46 ` Conor Dooley
2024-06-18 15:46 ` Conor Dooley
2024-06-16 17:20 ` [PATCH v1 2/9] dt-bindings: riscv: Add SpacemiT X60 compatibles Yangyu Chen
2024-06-16 17:20 ` Yangyu Chen
2024-06-18 15:45 ` Conor Dooley
2024-06-18 15:45 ` Conor Dooley
2024-06-16 17:20 ` [PATCH v1 3/9] dt-bindings: riscv: add SpacemiT K1 bindings Yangyu Chen
2024-06-16 17:20 ` Yangyu Chen
2024-06-16 18:42 ` Rob Herring (Arm)
2024-06-16 18:42 ` Rob Herring (Arm)
2024-06-18 15:45 ` Conor Dooley
2024-06-18 15:45 ` Conor Dooley
2024-06-16 17:20 ` [PATCH v1 4/9] dt-bindings: timer: Add SpacemiT K1 CLINT Yangyu Chen
2024-06-16 17:20 ` Yangyu Chen
2024-06-18 15:40 ` Conor Dooley
2024-06-18 15:40 ` Conor Dooley
2024-06-18 15:48 ` Yangyu Chen
2024-06-18 15:48 ` Yangyu Chen
2024-06-18 17:05 ` Conor Dooley
2024-06-18 17:05 ` Conor Dooley
2024-06-16 17:20 ` [PATCH v1 5/9] dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC Yangyu Chen
2024-06-16 17:20 ` Yangyu Chen
2024-06-18 15:44 ` Conor Dooley
2024-06-18 15:44 ` Conor Dooley
2024-06-16 17:20 ` [PATCH v1 6/9] riscv: add SpacemiT SOC family Kconfig support Yangyu Chen
2024-06-16 17:20 ` Yangyu Chen
2024-06-16 22:26 ` Yixun Lan
2024-06-16 22:26 ` Yixun Lan
2024-06-17 2:12 ` Yangyu Chen
2024-06-17 2:12 ` Yangyu Chen
2024-06-16 23:06 ` Yixun Lan
2024-06-16 23:06 ` Yixun Lan
2024-06-17 2:12 ` Yangyu Chen
2024-06-17 2:12 ` Yangyu Chen
2024-06-16 17:20 ` [PATCH v1 7/9] riscv: dts: add initial SpacemiT K1 SoC device tree Yangyu Chen
2024-06-16 17:20 ` Yangyu Chen
2024-06-16 22:53 ` Yixun Lan
2024-06-16 22:53 ` Yixun Lan
2024-06-17 2:10 ` Yangyu Chen
2024-06-17 2:10 ` Yangyu Chen
2024-06-17 6:02 ` Yixun Lan
2024-06-17 6:02 ` Yixun Lan
2024-06-17 7:31 ` Conor Dooley
2024-06-17 7:31 ` Conor Dooley
2024-06-17 12:49 ` Jisheng Zhang [this message]
2024-06-17 12:49 ` Jisheng Zhang
2024-06-17 13:29 ` Conor Dooley
2024-06-17 13:29 ` Conor Dooley
2024-06-17 13:31 ` Jisheng Zhang
2024-06-17 13:31 ` Jisheng Zhang
2024-06-17 17:01 ` Yangyu Chen
2024-06-17 17:01 ` Yangyu Chen
2024-06-16 17:20 ` [PATCH v1 8/9] riscv: dts: spacemit: add Banana Pi BPI-F3 board " Yangyu Chen
2024-06-16 17:20 ` Yangyu Chen
2024-06-16 22:31 ` Yixun Lan
2024-06-16 22:31 ` Yixun Lan
2024-06-17 2:16 ` Yangyu Chen
2024-06-17 2:16 ` Yangyu Chen
2024-06-16 17:20 ` [PATCH v1 9/9] riscv: defconfig: enable SpacemiT SoC Yangyu Chen
2024-06-16 17:20 ` Yangyu Chen
2024-06-16 18:35 ` [PATCH v1 0/9] riscv: add initial support for SpacemiT K1 Conor Dooley
2024-06-16 18:35 ` Conor Dooley
2024-06-16 22:48 ` Yixun Lan
2024-06-16 22:48 ` Yixun Lan
2024-06-17 2:00 ` Yangyu Chen
2024-06-17 2:00 ` Yangyu Chen
2024-06-17 7:28 ` Conor Dooley
2024-06-17 7:28 ` Conor Dooley
2024-06-17 8:15 ` Icenowy Zheng
2024-06-17 8:15 ` Icenowy Zheng
2024-06-17 14:11 ` Jisheng Zhang
2024-06-17 14:11 ` Jisheng Zhang
2024-06-17 15:32 ` Conor Dooley
2024-06-17 15:32 ` Conor Dooley
2024-06-17 16:39 ` Yangyu Chen
2024-06-17 16:39 ` Yangyu Chen
2024-06-17 17:14 ` Conor Dooley
2024-06-17 17:14 ` Conor Dooley
2024-06-17 17:42 ` Yangyu Chen
2024-06-17 17:42 ` Yangyu Chen
2024-06-18 6:58 ` Conor Dooley
2024-06-18 6:58 ` Conor Dooley
2024-06-18 4:39 ` Jisheng Zhang
2024-06-18 4:39 ` Jisheng Zhang
2024-06-18 4:34 ` Jisheng Zhang
2024-06-18 4:34 ` Jisheng Zhang
2024-06-18 10:16 ` Conor Dooley
2024-06-18 10:16 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZnAw9QrSD-svYqQ5@xhacker \
--to=jszhang@kernel.org \
--cc=anup.patel@wdc.com \
--cc=conor+dt@kernel.org \
--cc=cyy@cyyself.name \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=samuel.holland@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.