All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: Bjorn Andersson <andersson@kernel.org>,
	Jens Wiklander <jens.wiklander@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	op-tee@lists.trustedfirmware.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v9 6/7] remoteproc: stm32: Create sub-functions to request shutdown and release
Date: Thu, 12 Sep 2024 09:41:23 -0600	[thread overview]
Message-ID: <ZuMLo2+an1sxdYlt@p14s> (raw)
In-Reply-To: <20240830095147.3538047-7-arnaud.pouliquen@foss.st.com>

On Fri, Aug 30, 2024 at 11:51:46AM +0200, Arnaud Pouliquen wrote:
> To prepare for the support of TEE remoteproc, create sub-functions
> that can be used in both cases, with and without remoteproc TEE support.
> 
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
> ---
>  drivers/remoteproc/stm32_rproc.c | 84 +++++++++++++++++++-------------
>  1 file changed, 51 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
> index 8c7f7950b80e..79c638936163 100644
> --- a/drivers/remoteproc/stm32_rproc.c
> +++ b/drivers/remoteproc/stm32_rproc.c
> @@ -209,6 +209,54 @@ static int stm32_rproc_mbox_idx(struct rproc *rproc, const unsigned char *name)
>  	return -EINVAL;
>  }
>  
> +static void stm32_rproc_request_shutdown(struct rproc *rproc)
> +{
> +	struct stm32_rproc *ddata = rproc->priv;
> +	int err, dummy_data, idx;
> +
> +	/* Request shutdown of the remote processor */
> +	if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) {
> +		idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN);
> +		if (idx >= 0 && ddata->mb[idx].chan) {
> +			/* A dummy data is sent to allow to block on transmit. */
> +			err = mbox_send_message(ddata->mb[idx].chan,
> +						&dummy_data);

When refactoring functions, please do not change the inner code.  Here
@dummy_data was introduced.  Making changes, even small ones, makes it really
hard to review your work.  I'm pretty sure we talked about that before.

> +			if (err < 0)
> +				dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n");
> +		}
> +	}
> +}
> +
> +static int stm32_rproc_release(struct rproc *rproc)
> +{
> +	struct stm32_rproc *ddata = rproc->priv;
> +	unsigned int err = 0;
> +
> +	/* To allow platform Standby power mode, set remote proc Deep Sleep. */
> +	if (ddata->pdds.map) {
> +		err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg,
> +					 ddata->pdds.mask, 1);
> +		if (err) {
> +			dev_err(&rproc->dev, "failed to set pdds\n");
> +			return err;
> +		}
> +	}
> +
> +	/* Update coprocessor state to OFF if available. */
> +	if (ddata->m4_state.map) {
> +		err = regmap_update_bits(ddata->m4_state.map,
> +					 ddata->m4_state.reg,
> +					 ddata->m4_state.mask,
> +					 M4_STATE_OFF);
> +		if (err) {
> +			dev_err(&rproc->dev, "failed to set copro state\n");
> +			return err;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
>  static int stm32_rproc_prepare(struct rproc *rproc)
>  {
>  	struct device *dev = rproc->dev.parent;
> @@ -519,17 +567,9 @@ static int stm32_rproc_detach(struct rproc *rproc)
>  static int stm32_rproc_stop(struct rproc *rproc)
>  {
>  	struct stm32_rproc *ddata = rproc->priv;
> -	int err, idx;
> +	int err;
>  
> -	/* request shutdown of the remote processor */
> -	if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) {
> -		idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN);
> -		if (idx >= 0 && ddata->mb[idx].chan) {
> -			err = mbox_send_message(ddata->mb[idx].chan, "detach");
> -			if (err < 0)
> -				dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n");
> -		}
> -	}
> +	stm32_rproc_request_shutdown(rproc);
>  
>  	err = stm32_rproc_set_hold_boot(rproc, true);
>  	if (err)
> @@ -541,29 +581,7 @@ static int stm32_rproc_stop(struct rproc *rproc)
>  		return err;
>  	}
>  
> -	/* to allow platform Standby power mode, set remote proc Deep Sleep */
> -	if (ddata->pdds.map) {
> -		err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg,
> -					 ddata->pdds.mask, 1);
> -		if (err) {
> -			dev_err(&rproc->dev, "failed to set pdds\n");
> -			return err;
> -		}
> -	}
> -
> -	/* update coprocessor state to OFF if available */
> -	if (ddata->m4_state.map) {
> -		err = regmap_update_bits(ddata->m4_state.map,
> -					 ddata->m4_state.reg,
> -					 ddata->m4_state.mask,
> -					 M4_STATE_OFF);
> -		if (err) {
> -			dev_err(&rproc->dev, "failed to set copro state\n");
> -			return err;
> -		}
> -	}
> -
> -	return 0;
> +	return stm32_rproc_release(rproc);
>  }
>  
>  static void stm32_rproc_kick(struct rproc *rproc, int vqid)
> -- 
> 2.25.1
> 

WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: op-tee@lists.trustedfirmware.org
Subject: Re: [PATCH v9 6/7] remoteproc: stm32: Create sub-functions to request shutdown and release
Date: Thu, 12 Sep 2024 09:41:23 -0600	[thread overview]
Message-ID: <ZuMLo2+an1sxdYlt@p14s> (raw)
In-Reply-To: <20240830095147.3538047-7-arnaud.pouliquen@foss.st.com>

[-- Attachment #1: Type: text/plain, Size: 4222 bytes --]

On Fri, Aug 30, 2024 at 11:51:46AM +0200, Arnaud Pouliquen wrote:
> To prepare for the support of TEE remoteproc, create sub-functions
> that can be used in both cases, with and without remoteproc TEE support.
> 
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
> ---
>  drivers/remoteproc/stm32_rproc.c | 84 +++++++++++++++++++-------------
>  1 file changed, 51 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
> index 8c7f7950b80e..79c638936163 100644
> --- a/drivers/remoteproc/stm32_rproc.c
> +++ b/drivers/remoteproc/stm32_rproc.c
> @@ -209,6 +209,54 @@ static int stm32_rproc_mbox_idx(struct rproc *rproc, const unsigned char *name)
>  	return -EINVAL;
>  }
>  
> +static void stm32_rproc_request_shutdown(struct rproc *rproc)
> +{
> +	struct stm32_rproc *ddata = rproc->priv;
> +	int err, dummy_data, idx;
> +
> +	/* Request shutdown of the remote processor */
> +	if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) {
> +		idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN);
> +		if (idx >= 0 && ddata->mb[idx].chan) {
> +			/* A dummy data is sent to allow to block on transmit. */
> +			err = mbox_send_message(ddata->mb[idx].chan,
> +						&dummy_data);

When refactoring functions, please do not change the inner code.  Here
@dummy_data was introduced.  Making changes, even small ones, makes it really
hard to review your work.  I'm pretty sure we talked about that before.

> +			if (err < 0)
> +				dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n");
> +		}
> +	}
> +}
> +
> +static int stm32_rproc_release(struct rproc *rproc)
> +{
> +	struct stm32_rproc *ddata = rproc->priv;
> +	unsigned int err = 0;
> +
> +	/* To allow platform Standby power mode, set remote proc Deep Sleep. */
> +	if (ddata->pdds.map) {
> +		err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg,
> +					 ddata->pdds.mask, 1);
> +		if (err) {
> +			dev_err(&rproc->dev, "failed to set pdds\n");
> +			return err;
> +		}
> +	}
> +
> +	/* Update coprocessor state to OFF if available. */
> +	if (ddata->m4_state.map) {
> +		err = regmap_update_bits(ddata->m4_state.map,
> +					 ddata->m4_state.reg,
> +					 ddata->m4_state.mask,
> +					 M4_STATE_OFF);
> +		if (err) {
> +			dev_err(&rproc->dev, "failed to set copro state\n");
> +			return err;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
>  static int stm32_rproc_prepare(struct rproc *rproc)
>  {
>  	struct device *dev = rproc->dev.parent;
> @@ -519,17 +567,9 @@ static int stm32_rproc_detach(struct rproc *rproc)
>  static int stm32_rproc_stop(struct rproc *rproc)
>  {
>  	struct stm32_rproc *ddata = rproc->priv;
> -	int err, idx;
> +	int err;
>  
> -	/* request shutdown of the remote processor */
> -	if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) {
> -		idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN);
> -		if (idx >= 0 && ddata->mb[idx].chan) {
> -			err = mbox_send_message(ddata->mb[idx].chan, "detach");
> -			if (err < 0)
> -				dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n");
> -		}
> -	}
> +	stm32_rproc_request_shutdown(rproc);
>  
>  	err = stm32_rproc_set_hold_boot(rproc, true);
>  	if (err)
> @@ -541,29 +581,7 @@ static int stm32_rproc_stop(struct rproc *rproc)
>  		return err;
>  	}
>  
> -	/* to allow platform Standby power mode, set remote proc Deep Sleep */
> -	if (ddata->pdds.map) {
> -		err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg,
> -					 ddata->pdds.mask, 1);
> -		if (err) {
> -			dev_err(&rproc->dev, "failed to set pdds\n");
> -			return err;
> -		}
> -	}
> -
> -	/* update coprocessor state to OFF if available */
> -	if (ddata->m4_state.map) {
> -		err = regmap_update_bits(ddata->m4_state.map,
> -					 ddata->m4_state.reg,
> -					 ddata->m4_state.mask,
> -					 M4_STATE_OFF);
> -		if (err) {
> -			dev_err(&rproc->dev, "failed to set copro state\n");
> -			return err;
> -		}
> -	}
> -
> -	return 0;
> +	return stm32_rproc_release(rproc);
>  }
>  
>  static void stm32_rproc_kick(struct rproc *rproc, int vqid)
> -- 
> 2.25.1
> 

  reply	other threads:[~2024-09-12 15:41 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-30  9:51 [PATCH v9 0/7] Introduction of a remoteproc tee to load signed firmware Arnaud Pouliquen
2024-08-30  9:51 ` Arnaud Pouliquen
2024-08-30  9:51 ` [PATCH v9 1/7] remoteproc: core: Introduce rproc_pa_to_va helper Arnaud Pouliquen
2024-08-30  9:51   ` Arnaud Pouliquen
2024-08-30  9:51 ` [PATCH v9 2/7] remoteproc: Add TEE support Arnaud Pouliquen
2024-08-30  9:51   ` Arnaud Pouliquen
2024-09-11 15:17   ` Mathieu Poirier
2024-09-11 15:17     ` Mathieu Poirier
2024-09-11 15:25   ` Mathieu Poirier
2024-09-11 15:25     ` Mathieu Poirier
2024-09-13 16:01   ` Mathieu Poirier
2024-09-13 16:01     ` Mathieu Poirier
2024-08-30  9:51 ` [PATCH v9 3/7] remoteproc: core: Refactor resource table cleanup into rproc_release_fw Arnaud Pouliquen
2024-08-30  9:51   ` Arnaud Pouliquen
2024-09-11 15:20   ` Mathieu Poirier
2024-09-11 15:20     ` Mathieu Poirier
2024-08-30  9:51 ` [PATCH v9 4/7] remoteproc: core: Add TEE interface support for firmware release Arnaud Pouliquen
2024-08-30  9:51   ` Arnaud Pouliquen
2024-08-31 16:43   ` kernel test robot
2024-08-31 16:43     ` kernel test robot
2024-09-02  7:18     ` Arnaud POULIQUEN
2024-09-02  7:18       ` Arnaud POULIQUEN
2024-09-11 15:56   ` Mathieu Poirier
2024-09-11 15:56     ` Mathieu Poirier
2024-09-12 15:26   ` Mathieu Poirier
2024-09-12 15:26     ` Mathieu Poirier
2024-09-17 16:56     ` Arnaud POULIQUEN
2024-09-17 16:56       ` Arnaud POULIQUEN
2024-09-23 14:53       ` Mathieu Poirier
2024-09-23 14:53         ` Mathieu Poirier
2024-09-18 14:43   ` Arnaud POULIQUEN
2024-09-18 14:43     ` Arnaud POULIQUEN
2024-09-23 15:13     ` Mathieu Poirier
2024-09-23 15:13       ` Mathieu Poirier
2024-09-26  3:51   ` Bjorn Andersson
2024-09-26  3:51     ` Bjorn Andersson
2024-09-27 10:01     ` Arnaud POULIQUEN
2024-09-27 10:01       ` Arnaud POULIQUEN
2024-08-30  9:51 ` [PATCH v9 5/7] dt-bindings: remoteproc: Add compatibility for TEE support Arnaud Pouliquen
2024-08-30  9:51   ` Arnaud Pouliquen
2024-08-30  9:51 ` [PATCH v9 6/7] remoteproc: stm32: Create sub-functions to request shutdown and release Arnaud Pouliquen
2024-08-30  9:51   ` Arnaud Pouliquen
2024-09-12 15:41   ` Mathieu Poirier [this message]
2024-09-12 15:41     ` Mathieu Poirier
2024-08-30  9:51 ` [PATCH v9 7/7] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware Arnaud Pouliquen
2024-08-30  9:51   ` Arnaud Pouliquen
2024-09-13 16:03   ` Mathieu Poirier
2024-09-13 16:03     ` Mathieu Poirier
2024-09-16 14:08     ` Arnaud POULIQUEN
2024-09-16 14:08       ` Arnaud POULIQUEN

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZuMLo2+an1sxdYlt@p14s \
    --to=mathieu.poirier@linaro.org \
    --cc=andersson@kernel.org \
    --cc=arnaud.pouliquen@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jens.wiklander@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=op-tee@lists.trustedfirmware.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.