Re: [PATCH 18/20] hw/net/xilinx_ethlite: Map TX_CTRL as MMIO

["Edgar E. Iglesias" <edgar.iglesias@gmail.com>]

On Tue, Nov 12, 2024 at 07:10:42PM +0100, Philippe Mathieu-Daudé wrote:
> Add TX_CTRL to the TX registers MMIO region.
>

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>



> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> ---
>  hw/net/xilinx_ethlite.c | 56 +++++++++++++++++++----------------------
>  1 file changed, 26 insertions(+), 30 deletions(-)
> 
> diff --git a/hw/net/xilinx_ethlite.c b/hw/net/xilinx_ethlite.c
> index f7a5b1620a..f681b91769 100644
> --- a/hw/net/xilinx_ethlite.c
> +++ b/hw/net/xilinx_ethlite.c
> @@ -39,10 +39,8 @@
>  
>  #define R_TX_BUF0     0
>  #define A_TX_BASE0    0x07f4
> -#define R_TX_CTRL0    (0x07fc / 4)
>  #define R_TX_BUF1     (0x0800 / 4)
>  #define A_TX_BASE1    0x0ff4
> -#define R_TX_CTRL1    (0x0ffc / 4)
>  
>  #define R_RX_BUF0     (0x1000 / 4)
>  #define A_RX_BASE0    0x17fc
> @@ -55,6 +53,7 @@
>  enum {
>      TX_LEN =  0,
>      TX_GIE =  1,
> +    TX_CTRL = 2,
>      TX_MAX
>  };
>  
> @@ -71,6 +70,7 @@ enum {
>  
>  typedef struct XlnxXpsEthLitePort
>  {
> +    MemoryRegion txio;
>      MemoryRegion rxio;
>  
>      struct {
> @@ -143,6 +143,9 @@ static uint64_t port_tx_read(void *opaque, hwaddr addr, unsigned int size)
>          case TX_GIE:
>              r = s->port[port_index].reg.tx_gie;
>              break;
> +        case TX_CTRL:
> +            r = s->port[port_index].reg.tx_ctrl;
> +            break;
>          default:
>              g_assert_not_reached();
>      }
> @@ -154,6 +157,7 @@ static void port_tx_write(void *opaque, hwaddr addr, uint64_t value,
>                            unsigned int size)
>  {
>      XlnxXpsEthLite *s = opaque;
> +    unsigned port_index = addr_to_port_index(addr);
>  
>      switch (addr >> 2) {
>          case TX_LEN:
> @@ -162,6 +166,26 @@ static void port_tx_write(void *opaque, hwaddr addr, uint64_t value,
>          case TX_GIE:
>              s->port[port_index].reg.tx_gie = value;
>              break;
> +        case TX_CTRL:
> +            if ((value & (CTRL_P | CTRL_S)) == CTRL_S) {
> +                qemu_send_packet(qemu_get_queue(s->nic),
> +                                 txbuf_ptr(s, port_index),
> +                                 s->port[port_index].reg.tx_len);
> +                if (s->port[port_index].reg.tx_ctrl & CTRL_I) {
> +                    eth_pulse_irq(s);
> +                }
> +            } else if ((value & (CTRL_P | CTRL_S)) == (CTRL_P | CTRL_S)) {
> +                memcpy(&s->conf.macaddr.a[0], txbuf_ptr(s, port_index), 6);
> +                if (s->port[port_index].reg.tx_ctrl & CTRL_I) {
> +                    eth_pulse_irq(s);
> +                }
> +            }
> +            /*
> +             * We are fast and get ready pretty much immediately
> +             * so we actually never flip the S nor P bits to one.
> +             */
> +            s->port[port_index].reg.tx_ctrl = value & ~(CTRL_P | CTRL_S);
> +            break;
>          default:
>              g_assert_not_reached();
>      }
> @@ -232,18 +256,12 @@ static uint64_t
>  eth_read(void *opaque, hwaddr addr, unsigned int size)
>  {
>      XlnxXpsEthLite *s = opaque;
> -    unsigned port_index = addr_to_port_index(addr);
>      uint32_t r = 0;
>  
>      addr >>= 2;
>  
>      switch (addr)
>      {
> -        case R_TX_CTRL1:
> -        case R_TX_CTRL0:
> -            r = s->port[port_index].reg.tx_ctrl;
> -            break;
> -
>          default:
>              r = tswap32(s->regs[addr]);
>              break;
> @@ -256,33 +274,11 @@ eth_write(void *opaque, hwaddr addr,
>            uint64_t val64, unsigned int size)
>  {
>      XlnxXpsEthLite *s = opaque;
> -    unsigned int port_index = addr_to_port_index(addr);
>      uint32_t value = val64;
>  
>      addr >>= 2;
>      switch (addr) 
>      {
> -        case R_TX_CTRL0:
> -        case R_TX_CTRL1:
> -            if ((value & (CTRL_P | CTRL_S)) == CTRL_S) {
> -                qemu_send_packet(qemu_get_queue(s->nic),
> -                                 txbuf_ptr(s, port_index),
> -                                 s->port[port_index].reg.tx_len);
> -                if (s->port[port_index].reg.tx_ctrl & CTRL_I) {
> -                    eth_pulse_irq(s);
> -                }
> -            } else if ((value & (CTRL_P | CTRL_S)) == (CTRL_P | CTRL_S)) {
> -                memcpy(&s->conf.macaddr.a[0], txbuf_ptr(s, port_index), 6);
> -                if (s->port[port_index].reg.tx_ctrl & CTRL_I) {
> -                    eth_pulse_irq(s);
> -                }
> -            }
> -
> -            /* We are fast and get ready pretty much immediately so
> -               we actually never flip the S nor P bits to one.  */
> -            s->port[port_index].reg.tx_ctrl = value & ~(CTRL_P | CTRL_S);
> -            break;
> -
>          default:
>              s->regs[addr] = tswap32(value);
>              break;
> -- 
> 2.45.2
>