Re: [PATCH v5 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Tue, Nov 19, 2024 at 04:00:20PM +0100, Jan Petrous via B4 Relay wrote:
> From: "Jan Petrous (OSS)" <jan.petrous@oss.nxp.com>
> 
> NXP S32G2xx/S32G3xx and S32R45 are automotive grade SoCs
> that integrate one or two Synopsys DWMAC 5.10/5.20 IPs.
> 
> The basic driver supports only RGMII interface.
> 
> Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>

One thing that stands out to me in this is the duplication of the PHY
interface mode. I would much prefer if we didn't end up with multiple
copies, but instead made use of the one already in plat_stmmacenet_data
maybe by storing a its pointer in struct s32_priv_data?

> ---
>  drivers/net/ethernet/stmicro/stmmac/Kconfig     |  12 ++
>  drivers/net/ethernet/stmicro/stmmac/Makefile    |   1 +
>  drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c | 204 ++++++++++++++++++++++++
>  3 files changed, 217 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index 05cc07b8f48c..a6579377bedb 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -154,6 +154,18 @@ config DWMAC_RZN1
>  	  the stmmac device driver. This support can make use of a custom MII
>  	  converter PCS device.
>  
> +config DWMAC_S32
> +	tristate "NXP S32G/S32R GMAC support"
> +	default ARCH_S32
> +	depends on OF && (ARCH_S32 || COMPILE_TEST)
> +	help
> +	  Support for ethernet controller on NXP S32CC SOCs.
> +
> +	  This selects NXP SoC glue layer support for the stmmac
> +	  device driver. This driver is used for the S32CC series
> +	  SOCs GMAC ethernet controller, ie. S32G2xx, S32G3xx and
> +	  S32R45.
> +
>  config DWMAC_SOCFPGA
>  	tristate "SOCFPGA dwmac support"
>  	default ARCH_INTEL_SOCFPGA
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
> index c2f0e91f6bf8..1e87e2652c82 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o dwmac-meson8b.o
>  obj-$(CONFIG_DWMAC_QCOM_ETHQOS)	+= dwmac-qcom-ethqos.o
>  obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
>  obj-$(CONFIG_DWMAC_RZN1)	+= dwmac-rzn1.o
> +obj-$(CONFIG_DWMAC_S32)		+= dwmac-s32.o
>  obj-$(CONFIG_DWMAC_SOCFPGA)	+= dwmac-altr-socfpga.o
>  obj-$(CONFIG_DWMAC_STARFIVE)	+= dwmac-starfive.o
>  obj-$(CONFIG_DWMAC_STI)		+= dwmac-sti.o
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
> new file mode 100644
> index 000000000000..9af7cd093100
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
> @@ -0,0 +1,204 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * NXP S32G/R GMAC glue layer
> + *
> + * Copyright 2019-2024 NXP
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/device.h>
> +#include <linux/ethtool.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_mdio.h>
> +#include <linux/of_address.h>
> +#include <linux/phy.h>
> +#include <linux/phylink.h>
> +#include <linux/platform_device.h>
> +#include <linux/stmmac.h>
> +
> +#include "stmmac_platform.h"
> +
> +#define GMAC_TX_RATE_125M	125000000	/* 125MHz */
> +
> +/* SoC PHY interface control register */
> +#define PHY_INTF_SEL_MII	0x00
> +#define PHY_INTF_SEL_SGMII	0x01
> +#define PHY_INTF_SEL_RGMII	0x02
> +#define PHY_INTF_SEL_RMII	0x08
> +
> +struct s32_priv_data {
> +	void __iomem *ioaddr;
> +	void __iomem *ctrl_sts;
> +	struct device *dev;
> +	phy_interface_t intf_mode;
> +	struct clk *tx_clk;
> +	struct clk *rx_clk;
> +};
> +
> +static int s32_gmac_write_phy_intf_select(struct s32_priv_data *gmac)
> +{
> +	u32 intf_sel;
> +
> +	switch (gmac->intf_mode) {
> +	case PHY_INTERFACE_MODE_RGMII:
> +	case PHY_INTERFACE_MODE_RGMII_ID:
> +	case PHY_INTERFACE_MODE_RGMII_TXID:
> +	case PHY_INTERFACE_MODE_RGMII_RXID:
> +		intf_sel = PHY_INTF_SEL_RGMII;
> +		break;
> +	default:
> +		dev_err(gmac->dev, "Unsupported PHY interface: %s\n",
> +			phy_modes(gmac->intf_mode));
> +		return -EINVAL;
> +	}

This can be simplfied to:

	if (!phy_interface_mode_is_rgmii(...)) {
		dev_err(gmac->dev, "Unsupported PHY interface: %s\n",
			phy_modes(...));
		return -EINVAL;
	}

Also, would it not be better to validate this in s32_dwmac_probe()?

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!