All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alper Nebi Yasak <alpernebiyasak@gmail.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: u-boot@lists.denx.de, Peng Fan <peng.fan@nxp.com>,
	sbabic@denx.de, festevam@gmail.com,
	ariel.dalessandro@collabora.com, michael@amarulasolutions.com,
	tharvey@gateworks.com, sjg@chromium.org, marek.behun@nic.cz,
	pali@kernel.org, sr@denx.de, ricardo@foundries.io,
	patrick.delaunay@foss.st.com, trini@konsulko.com,
	"NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Subject: Re: [PATCH V4 2/8] arm: dts: imx8m: update binman ddr firmware node name
Date: Sun, 22 May 2022 16:56:37 +0300	[thread overview]
Message-ID: <a894c215-91cd-233b-7d04-7c345d21f513@gmail.com> (raw)
In-Reply-To: <20220520141048.20034-3-peng.fan@oss.nxp.com>

On 20/05/2022 17:10, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> We are migrating to use BINMAN SYMBOLS, the current name is not
> a valid binman type, so update to use blob-ext@[1,2,3,4].
> 
> Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8m[m,n,p]-venice
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  arch/arm/dts/imx8mm-u-boot.dtsi                   | 8 ++++----
>  arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi | 4 ++--
>  arch/arm/dts/imx8mn-var-som-symphony-u-boot.dtsi  | 8 ++++----
>  arch/arm/dts/imx8mn-venice-u-boot.dtsi            | 8 ++++----
>  arch/arm/dts/imx8mq-u-boot.dtsi                   | 8 ++++----
>  5 files changed, 18 insertions(+), 18 deletions(-)

I think descriptive entry names are better in general, so I prefer the
old names to a bunch of 'blob-ext's. Symbol resolution is done using the
entry names anyway, I don't see why this change would be necessary.

In any case, the names and labels should be consistent across the
different dts files, assuming the blobs have the same purpose / meaning.
I see that labels starting with digits cause a dtc parse error, so the
entries could be `imem_1d: imem-1d { ... };` and so on.

Also, the blobs essentially look the same to me aside from their
filenames, just duplicated over different imx8m* variants and boards.
Maybe binman parts could be unified into a single dtsi file later on?
(Filename differences can be handled by new 'blob_named_by_arg's btw.)

> diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
> index 9f66cdb65a9..5de55a2d80b 100644
> --- a/arch/arm/dts/imx8mm-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mm-u-boot.dtsi
> @@ -39,25 +39,25 @@
>  			filename = "u-boot-spl.bin";
>  		};
>  
> -		1d-imem {
> +		imem_1d: blob-ext@1 {
>  			filename = "lpddr4_pmu_train_1d_imem.bin";
>  			size = <0x8000>;
>  			type = "blob-ext";
>  		};
>  
> -		1d-dmem {
> +		dmem_1d: blob-ext@2 {
>  			filename = "lpddr4_pmu_train_1d_dmem.bin";
>  			size = <0x4000>;
>  			type = "blob-ext";
>  		};
>  
> -		2d-imem {
> +		imem_2d: blob-ext@3 {
>  			filename = "lpddr4_pmu_train_2d_imem.bin";
>  			size = <0x8000>;
>  			type = "blob-ext";
>  		};
>  
> -		2d-dmem {
> +		dmem_2d: blob-ext@4 {
>  			filename = "lpddr4_pmu_train_2d_dmem.bin";
>  			size = <0x4000>;
>  			type = "blob-ext";
> diff --git a/arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi b/arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi
> index 46a9d7fd78b..5a52b73d7e9 100644
> --- a/arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi
> +++ b/arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi
> @@ -111,13 +111,13 @@
>  			filename = "u-boot-spl.bin";
>  		};
>  
> -		1d-imem {
> +		imem_1d: blob-ext@1 {
>  			filename = "ddr3_imem_1d.bin";
>  			size = <0x8000>;
>  			type = "blob-ext";
>  		};
>  
> -		1d_dmem {
> +		dmem_1d: blob-ext@2 {
>  			filename = "ddr3_dmem_1d.bin";
>  			size = <0x4000>;
>  			type = "blob-ext";
> diff --git a/arch/arm/dts/imx8mn-var-som-symphony-u-boot.dtsi b/arch/arm/dts/imx8mn-var-som-symphony-u-boot.dtsi
> index 6e37622cca7..001e725f568 100644
> --- a/arch/arm/dts/imx8mn-var-som-symphony-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mn-var-som-symphony-u-boot.dtsi
> @@ -130,25 +130,25 @@
>  			filename = "u-boot-spl.bin";
>  		};
>  
> -		1d-imem {
> +		blob_1: blob-ext@1 {
>  			filename = "ddr4_imem_1d.bin";
>  			size = <0x8000>;
>  			type = "blob-ext";
>  		};
>  
> -		1d_dmem {
> +		blob_2: blob-ext@2 {
>  			filename = "ddr4_dmem_1d.bin";
>  			size = <0x4000>;
>  			type = "blob-ext";
>  		};
>  
> -		2d_imem {
> +		blob_3: blob-ext@3 {
>  			filename = "ddr4_imem_2d.bin";
>  			size = <0x8000>;
>  			type = "blob-ext";
>  		};
>  
> -		2d_dmem {
> +		blob_4: blob-ext@4 {
>  			filename = "ddr4_dmem_2d.bin";
>  			size = <0x4000>;
>  			type = "blob-ext";
> diff --git a/arch/arm/dts/imx8mn-venice-u-boot.dtsi b/arch/arm/dts/imx8mn-venice-u-boot.dtsi
> index 35819553879..67922146963 100644
> --- a/arch/arm/dts/imx8mn-venice-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mn-venice-u-boot.dtsi
> @@ -126,25 +126,25 @@
>  			filename = "u-boot-spl.bin";
>  		};
>  
> -		1d-imem {
> +		imem_1d: blob-ext@1 {
>  			filename = "lpddr4_pmu_train_1d_imem.bin";
>  			size = <0x8000>;
>  			type = "blob-ext";
>  		};
>  
> -		1d_dmem {
> +		dmem_1d: blob-ext@2 {
>  			filename = "lpddr4_pmu_train_1d_dmem.bin";
>  			size = <0x4000>;
>  			type = "blob-ext";
>  		};
>  
> -		2d_imem {
> +		imem_2d: blob-ext@3 {
>  			filename = "lpddr4_pmu_train_2d_imem.bin";
>  			size = <0x8000>;
>  			type = "blob-ext";
>  		};
>  
> -		2d_dmem {
> +		dmem_2d: blob-ext@4 {
>  			filename = "lpddr4_pmu_train_2d_dmem.bin";
>  			size = <0x4000>;
>  			type = "blob-ext";
> diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi
> index 912a3d4a356..389414ad26f 100644
> --- a/arch/arm/dts/imx8mq-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mq-u-boot.dtsi
> @@ -46,25 +46,25 @@
>  			filename = "u-boot-spl.bin";
>  		};
>  
> -		1d-imem {
> +		imem_1d: blob-ext@1 {
>  			filename = "lpddr4_pmu_train_1d_imem.bin";
>  			size = <0x8000>;
>  			type = "blob-ext";
>  		};
>  
> -		1d-dmem {
> +		dmem_1d: blob-ext@2 {
>  			filename = "lpddr4_pmu_train_1d_dmem.bin";
>  			size = <0x4000>;
>  			type = "blob-ext";
>  		};
>  
> -		2d-imem {
> +		imem_2d: blob-ext@3 {
>  			filename = "lpddr4_pmu_train_2d_imem.bin";
>  			size = <0x8000>;
>  			type = "blob-ext";
>  		};
>  
> -		2d-dmem {
> +		dmem_2d: blob-ext@4 {
>  			filename = "lpddr4_pmu_train_2d_dmem.bin";
>  			size = <0x4000>;
>  			type = "blob-ext";

  reply	other threads:[~2022-05-22 13:59 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-20 14:10 [PATCH V4 0/8] arm64: binman: use binman symbols for imx Peng Fan (OSS)
2022-05-20 14:10 ` [PATCH V4 1/8] spl: guard u_boot_any with X86 Peng Fan (OSS)
2022-05-20 15:21   ` Tom Rini
2022-05-21  8:33     ` Peng Fan
2022-05-21 12:05       ` Tom Rini
2022-05-22 13:56         ` Alper Nebi Yasak
2022-05-22 14:50           ` Tom Rini
2022-05-23 21:10             ` Alper Nebi Yasak
2022-05-23  6:19           ` Peng Fan (OSS)
2022-05-23  6:28         ` Peng Fan (OSS)
2022-05-23 14:10           ` Tom Rini
2022-05-23 21:10             ` Alper Nebi Yasak
2022-05-22 13:55   ` Alper Nebi Yasak
2022-05-20 14:10 ` [PATCH V4 2/8] arm: dts: imx8m: update binman ddr firmware node name Peng Fan (OSS)
2022-05-22 13:56   ` Alper Nebi Yasak [this message]
2022-05-23  7:01     ` Peng Fan (OSS)
2022-05-23 21:11       ` Alper Nebi Yasak
2022-05-20 14:10 ` [PATCH V4 3/8] imx: imx8mm-icore: migrate to use BINMAN Peng Fan (OSS)
2022-05-22 13:56   ` Alper Nebi Yasak
2022-05-23  7:02     ` Peng Fan (OSS)
2022-05-20 14:10 ` [PATCH V4 4/8] armv8: u-boot-spl.lds: mark __image_copy_start as symbol Peng Fan (OSS)
2022-05-20 15:21   ` Tom Rini
2022-05-20 14:10 ` [PATCH V4 5/8] tools: binman: section: replace @ with - Peng Fan (OSS)
2022-05-22 13:57   ` Alper Nebi Yasak
2022-05-23  7:05     ` Peng Fan (OSS)
2022-05-20 14:10 ` [PATCH V4 6/8] ddr: imx8m: helper: load ddr firmware according to binman symbols Peng Fan (OSS)
2022-05-22 13:57   ` Alper Nebi Yasak
2022-05-23  7:08     ` Peng Fan (OSS)
2022-05-20 14:10 ` [PATCH V4 7/8] arm: dts: imx8m: shrink ddr firmware size to actual file size Peng Fan (OSS)
2022-05-23 21:12   ` Alper Nebi Yasak
2022-05-24  5:50     ` Michael Nazzareno Trimarchi
2022-05-20 14:10 ` [PATCH V4 8/8] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS Peng Fan (OSS)
2022-05-22 13:57   ` Alper Nebi Yasak
2022-05-23  7:10     ` Peng Fan (OSS)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a894c215-91cd-233b-7d04-7c345d21f513@gmail.com \
    --to=alpernebiyasak@gmail.com \
    --cc=ariel.dalessandro@collabora.com \
    --cc=festevam@gmail.com \
    --cc=marek.behun@nic.cz \
    --cc=michael@amarulasolutions.com \
    --cc=pali@kernel.org \
    --cc=patrick.delaunay@foss.st.com \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=ricardo@foundries.io \
    --cc=sbabic@denx.de \
    --cc=sjg@chromium.org \
    --cc=sr@denx.de \
    --cc=tharvey@gateworks.com \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=uboot-imx@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.