From: Leo Liang <ycliang@andestech.com>
To: <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, <rick@andestech.com>, <ycliang@andestech.com>
Subject: [GIT PULL] u-boot-riscv/master
Date: Fri, 25 Apr 2025 18:07:54 +0800 [thread overview]
Message-ID: <aAte-nS8ZhO_Odw1@swlinux02> (raw)
Hi Tom,
The following changes since commit 10f48365112b164bee6564033ab682747efcb483:
Merge patch series "Add PCIe support for TI AM64 SoC" (2025-04-24 10:46:17 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git
for you to fetch changes up to 5ac699efe94f24df561d33e420d3c73f5fb797e8:
board: starfive: visionfive2: Order board detection logic to match config (2025-04-25 17:04:09 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/25940
----------------------------------------------------------------
- riscv: lib: Simplify FDT retrieving process
- board: k1: pinctrl: Add pinctrl support for bananapi-f3
- binman: riscv: Fix binman_sym functionality
- board: starfive: visionfive2: Reorder board detection logic
- board: starfive: Add DeepComputing FML13V01 support
----------------------------------------------------------------
E Shattow (2):
doc: board: starfive: visionfive2: add missing format command to Flashing
board: starfive: visionfive2: Order board detection logic to match config
Heinrich Schuchardt (9):
configs: qemu-riscv raise CONFIG_NR_DRAM_BANKS
configs: add jh7110-deepcomputing-fml13v01 to VF2 defconfig
riscv: dts: jh7110: add DeepComputing FML13V01 device-tree
board: starfive: DeepComputing FML13V01 fdt selection
board: starfive: spl: support DeepComputing FML13V01
doc: add DeepComputing FML13V01 documentation
doc: starfive: use consistent formatting
doc: starfive: use jh7110_common.rst
doc: jh7110: describe debug UART
Huan Zhou (2):
riscv: dts: k1: add pinctrl property in dts.
config: Enable pinctrl in bananapi-f3
Minda Chen (1):
MAINTAINERS: visionfive2: Add match N: starfive pattern
Yao Zi (7):
riscv: lib: Add a default implementation of board_fdt_blob_setup
board: qemu: riscv: Remove duplicated board_fdt_blob_setup
board: starfive: Remove duplicated board_fdt_blob_setup
board: sifive: Remove dead board_fdt_blob_setup
riscv: dts: binman.dtsi: Switch to u-boot-nodtb entry for proper U-Boot
riscv: dts: starfive: Prevent binman from relocating symbols in SPL
riscv: Provide __image_copy_{start_end} symbols in linkerscript
arch/riscv/cpu/u-boot-spl.lds | 2 +
arch/riscv/cpu/u-boot.lds | 3 +
arch/riscv/dts/binman.dtsi | 2 +-
.../dts/jh7110-deepcomputing-fml13v01-u-boot.dtsi | 7 ++
arch/riscv/dts/k1-bananapi-f3.dts | 3 +
arch/riscv/dts/k1-pinctrl.dtsi | 19 ++++
arch/riscv/dts/k1.dtsi | 8 +-
arch/riscv/dts/starfive-visionfive2-binman.dtsi | 1 +
arch/riscv/lib/Makefile | 1 +
arch/riscv/lib/board.c | 19 ++++
board/emulation/qemu-riscv/qemu-riscv.c | 8 --
board/sifive/unleashed/unleashed.c | 11 ---
board/sifive/unmatched/unmatched.c | 10 --
board/starfive/visionfive2/MAINTAINERS | 2 +-
board/starfive/visionfive2/spl.c | 43 +++++----
board/starfive/visionfive2/starfive_visionfive2.c | 16 +---
configs/bananapi-f3_defconfig | 2 +
configs/qemu-riscv32_defconfig | 1 -
configs/qemu-riscv32_smode_defconfig | 1 -
configs/qemu-riscv32_spl_defconfig | 1 -
configs/qemu-riscv64_defconfig | 1 -
configs/qemu-riscv64_smode_defconfig | 1 -
configs/qemu-riscv64_spl_defconfig | 1 -
configs/starfive_visionfive2_defconfig | 2 +-
doc/board/starfive/deepcomputing_fml13v01.rst | 80 ++++++++++++++++
doc/board/starfive/index.rst | 1 +
doc/board/starfive/jh7110_common.rst | 103 +++++++++++++++++++++
doc/board/starfive/milk-v_mars.rst | 18 +---
doc/board/starfive/pine64_star64.rst | 26 +-----
doc/board/starfive/visionfive2.rst | 48 ++--------
30 files changed, 292 insertions(+), 149 deletions(-)
create mode 100644 arch/riscv/dts/jh7110-deepcomputing-fml13v01-u-boot.dtsi
create mode 100644 arch/riscv/dts/k1-pinctrl.dtsi
create mode 100644 arch/riscv/lib/board.c
create mode 100644 doc/board/starfive/deepcomputing_fml13v01.rst
create mode 100644 doc/board/starfive/jh7110_common.rst
Best regards,
Leo
next reply other threads:[~2025-04-25 10:08 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-25 10:07 Leo Liang [this message]
2025-04-25 10:35 ` [GIT PULL] u-boot-riscv/master Yao Zi
2025-04-26 14:14 ` Tom Rini
2025-04-26 17:26 ` [PATCH] riscv: dts: binman.dtsi: Drop filename property for proper U-Boot Yao Zi
2025-05-08 6:52 ` Leo Liang
2025-04-25 12:57 ` [GIT PULL] u-boot-riscv/master E Shattow
2025-04-25 13:02 ` E Shattow
2025-04-25 23:43 ` Tom Rini
2025-04-26 1:13 ` E Shattow
2025-04-26 14:14 ` Tom Rini
2025-04-27 7:47 ` E Shattow
-- strict thread matches above, loose matches on Subject: below --
2025-10-16 12:07 [GIT,PULL] u-boot-riscv/master Leo Liang
2025-10-16 17:38 ` Tom Rini
2025-08-12 8:04 [GIT PULL] u-boot-riscv/master Leo Liang
2025-08-12 15:22 ` Tom Rini
2025-08-13 6:57 ` Leo Liang
2025-08-13 11:16 ` Martin Herren
2025-08-13 11:59 ` Leo Liang
2025-05-21 9:50 Leo Liang
2025-05-21 18:39 ` Tom Rini
2025-05-22 11:28 ` Conor Dooley
2025-05-22 14:45 ` Tom Rini
2025-05-22 15:36 ` Leo Liang
2025-05-22 15:54 ` Tom Rini
2025-05-22 16:40 ` Yao Zi
2025-05-23 9:18 ` Conor Dooley
2025-05-26 3:32 ` Mayuresh Chitale
2025-05-26 9:17 ` Conor Dooley
2025-05-26 14:56 ` Tom Rini
2025-05-26 17:34 ` Mayuresh Chitale
2025-05-26 18:16 ` Tom Rini
2025-05-27 17:10 ` Mayuresh Chitale
2025-05-27 17:34 ` Tom Rini
2025-03-25 6:19 Leo Liang
2025-03-25 20:18 ` Tom Rini
2025-03-06 12:18 Leo Liang
2025-03-07 11:20 ` Yao Zi
2025-02-20 5:13 Leo Liang
2025-02-20 17:19 ` Tom Rini
2025-02-03 8:17 Leo Liang
2025-02-03 21:26 ` Tom Rini
2025-01-17 1:53 Leo Liang
2025-01-17 17:56 ` Tom Rini
2024-11-27 13:08 Leo Liang
2024-11-27 18:54 ` Tom Rini
2024-11-06 12:12 Leo Liang
2024-11-08 16:51 ` Tom Rini
2024-11-11 13:24 ` Tom Rini
2024-10-29 12:33 Leo Liang
2024-10-29 16:37 ` Tom Rini
2024-10-28 12:24 Leo Liang
2024-10-28 19:33 ` Tom Rini
2024-07-22 8:29 Leo Liang
2024-07-22 19:31 ` Tom Rini
2024-05-30 8:56 Leo Liang
2024-06-03 17:42 ` Tom Rini
2024-05-14 13:28 Leo Liang
2024-05-14 16:14 ` Tom Rini
2024-05-01 16:38 Leo Liang
2024-05-02 14:42 ` Tom Rini
2024-04-09 8:25 Leo Liang
2024-04-10 0:43 ` Tom Rini
2024-03-26 13:22 Leo Liang
2024-03-27 12:12 ` Tom Rini
2024-03-12 8:51 Leo Liang
2024-03-12 18:52 ` Tom Rini
2024-01-31 10:21 Leo Liang
2024-01-31 14:14 ` Tom Rini
2023-12-14 2:38 Leo Yu-Chi Liang(梁育齊)
2023-12-14 12:19 ` Tom Rini
2023-12-14 12:46 ` Leo Liang
2023-12-14 14:39 ` Tom Rini
2023-12-07 13:46 Leo Liang
2023-12-09 20:59 ` Tom Rini
2023-11-02 10:49 Leo Liang
2023-11-02 14:53 ` Tom Rini
2021-02-26 1:53 Leo Liang
2021-02-26 17:40 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aAte-nS8ZhO_Odw1@swlinux02 \
--to=ycliang@andestech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.