From: Leo Liang <ycliang@andestech.com>
To: <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, <ycliang@andestech.com>,
<rick@andestech.com>, <heinrich.schuchardt@canonical.com>,
<ben.dooks@codethink.co.uk>, <jamie.gibbons@microchip.com>,
<sputnik@on-the-web.ch>, <michal.simek@amd.com>
Subject: [GIT PULL] u-boot-riscv/master
Date: Tue, 12 Aug 2025 16:04:49 +0800 [thread overview]
Message-ID: <aJr1oclCSUMcK3bb@swlinux02> (raw)
Hi Tom,
The following changes since commit acfacf452441d0a659e3afbd55fd6061aa17e647:
Prepare v2025.10-rc2 (2025-08-11 13:47:46 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git
for you to fetch changes up to bddcd6bcba081aaaaafe30d1b8f9f3c83f069bde:
starfive: fix return code of `mac write_eeprom` (2025-08-12 15:34:39 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/27348
----------------------------------------------------------------
- Board: mbv: Prepare MBV for CI
- Board: MPFS Icicle Kit cleanup
- Board: Add Andes Voyager board support
- RISCV: Update SYS_BOOTM_LEN to commonly used value
- starfive: fix return code of `mac write_eeprom`
----------------------------------------------------------------
Heinrich Schuchardt (1):
starfive: fix return code of `mac write_eeprom`
Jamie Gibbons (6):
configs: microchip_mpfs_icicle: enable CONFIG_OF_BOARD_SETUP
board: microchip: mpfs_icicle: make use of ft_board_setup()
mailbox: add PolarFire SoC mailbox driver
misc: add PolarFire SoC system controller
board: microchip: mpfs_icicle: enable new driver configs
board: microchip: mpfs_icicle: update to use system controller
Leo Yu-Chi Liang (6):
riscv: board: Add Andes Voyager board Kconfig support
riscv: dts: andes: Add Voyager device tree
board: MAINTAINERS: Add Voyager board maintainer
board: andestech: Add Voyager board support
configs: andes: add Voyager board defconfig
doc: board: voyager: Add documentation for Voyager
Martin Herren (4):
riscv: Set SYS_BOOTM_LEN explicitly to 0x800000
riscv: Set SYS_BOOTM_LEN default to 0x4000000
riscv: Remove default SYS_BOOTM_LEN from defconfig
riscv: Increase Microchip Icicle's SYS_BOOTM_LEN
Michal Simek (4):
xilinx: mbv: Disable OF_HAS_PRIOR_STAGE
xilinx: mbv: Add missing mmu-type cpu property
xilinx: mbv: Fix dt properties in interrupt controller node
xilinx: mbv: Use separate DTB for binman nodes
arch/riscv/Kconfig | 4 +
arch/riscv/dts/Makefile | 2 +
arch/riscv/dts/qilai-voyager.dts | 227 +++++++++++++++++++++
arch/riscv/dts/voyager-u-boot.dtsi | 52 +++++
arch/riscv/dts/xilinx-binman.dts | 12 ++
arch/riscv/dts/xilinx-mbv32.dts | 8 +-
arch/riscv/dts/xilinx-mbv64.dts | 8 +-
board/andestech/voyager/Kconfig | 44 ++++
board/andestech/voyager/MAINTAINERS | 7 +
board/andestech/voyager/Makefile | 6 +
board/andestech/voyager/voyager.c | 71 +++++++
board/microchip/mpfs_icicle/Kconfig | 4 +
board/microchip/mpfs_icicle/mpfs_icicle.c | 121 ++++++-----
.../starfive/visionfive2/visionfive2-i2c-eeprom.c | 8 +-
board/xilinx/mbv/Kconfig | 1 -
boot/Kconfig | 2 +-
configs/ae350_rv32_defconfig | 1 -
configs/ae350_rv32_falcon_defconfig | 1 -
configs/ae350_rv32_falcon_xip_defconfig | 1 -
configs/ae350_rv32_spl_defconfig | 1 -
configs/ae350_rv32_spl_xip_defconfig | 1 -
configs/ae350_rv32_xip_defconfig | 1 -
configs/ae350_rv64_defconfig | 1 -
configs/ae350_rv64_falcon_defconfig | 1 -
configs/ae350_rv64_falcon_xip_defconfig | 1 -
configs/ae350_rv64_spl_defconfig | 1 -
configs/ae350_rv64_spl_xip_defconfig | 1 -
configs/ae350_rv64_xip_defconfig | 1 -
configs/ibex-ast2700_defconfig | 1 -
configs/k230_canmv_defconfig | 1 +
configs/microchip_mpfs_icicle_defconfig | 4 +
configs/milkv_duo_defconfig | 1 -
configs/qemu-riscv32_defconfig | 1 -
configs/qemu-riscv32_smode_defconfig | 1 -
configs/qemu-riscv32_spl_defconfig | 1 -
configs/qemu-riscv64_defconfig | 1 -
configs/qemu-riscv64_smode_defconfig | 1 -
configs/qemu-riscv64_spl_defconfig | 1 -
configs/sifive_unleashed_defconfig | 1 -
configs/sifive_unmatched_defconfig | 1 -
configs/sipeed_licheerv_nano_defconfig | 1 -
configs/sipeed_maix_bitm_defconfig | 1 +
configs/sipeed_maix_smode_defconfig | 1 +
configs/starfive_visionfive2_defconfig | 1 -
configs/th1520_lpi4a_defconfig | 1 -
configs/voyager_spl_defconfig | 66 ++++++
configs/xilinx_mbv32_defconfig | 2 +
configs/xilinx_mbv32_smode_defconfig | 2 +
configs/xilinx_mbv64_defconfig | 2 +
configs/xilinx_mbv64_smode_defconfig | 2 +
doc/board/andestech/index.rst | 1 +
doc/board/andestech/voyager.rst | 81 ++++++++
drivers/mailbox/Kconfig | 7 +
drivers/mailbox/Makefile | 1 +
drivers/mailbox/mpfs-mbox.c | 177 ++++++++++++++++
drivers/misc/Kconfig | 9 +
drivers/misc/Makefile | 1 +
drivers/misc/mpfs_syscontroller.c | 157 ++++++++++++++
include/configs/voyager.h | 40 ++++
include/mpfs-mailbox.h | 67 ++++++
60 files changed, 1121 insertions(+), 103 deletions(-)
create mode 100644 arch/riscv/dts/qilai-voyager.dts
create mode 100644 arch/riscv/dts/voyager-u-boot.dtsi
create mode 100644 arch/riscv/dts/xilinx-binman.dts
create mode 100644 board/andestech/voyager/Kconfig
create mode 100644 board/andestech/voyager/MAINTAINERS
create mode 100644 board/andestech/voyager/Makefile
create mode 100644 board/andestech/voyager/voyager.c
create mode 100644 configs/voyager_spl_defconfig
create mode 100644 doc/board/andestech/voyager.rst
create mode 100644 drivers/mailbox/mpfs-mbox.c
create mode 100644 drivers/misc/mpfs_syscontroller.c
create mode 100644 include/configs/voyager.h
create mode 100644 include/mpfs-mailbox.h
Best regards,
Leo
next reply other threads:[~2025-08-12 8:05 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-12 8:04 Leo Liang [this message]
2025-08-12 15:22 ` [GIT PULL] u-boot-riscv/master Tom Rini
2025-08-13 6:57 ` Leo Liang
2025-08-13 11:16 ` Martin Herren
2025-08-13 11:59 ` Leo Liang
-- strict thread matches above, loose matches on Subject: below --
2025-10-16 12:07 [GIT,PULL] u-boot-riscv/master Leo Liang
2025-10-16 17:38 ` Tom Rini
2025-05-21 9:50 [GIT PULL] u-boot-riscv/master Leo Liang
2025-05-21 18:39 ` Tom Rini
2025-05-22 11:28 ` Conor Dooley
2025-05-22 14:45 ` Tom Rini
2025-05-22 15:36 ` Leo Liang
2025-05-22 15:54 ` Tom Rini
2025-05-22 16:40 ` Yao Zi
2025-05-23 9:18 ` Conor Dooley
2025-05-26 3:32 ` Mayuresh Chitale
2025-05-26 9:17 ` Conor Dooley
2025-05-26 14:56 ` Tom Rini
2025-05-26 17:34 ` Mayuresh Chitale
2025-05-26 18:16 ` Tom Rini
2025-05-27 17:10 ` Mayuresh Chitale
2025-05-27 17:34 ` Tom Rini
2025-04-25 10:07 Leo Liang
2025-04-25 10:35 ` Yao Zi
2025-04-26 14:14 ` Tom Rini
2025-04-25 12:57 ` E Shattow
2025-04-25 13:02 ` E Shattow
2025-04-25 23:43 ` Tom Rini
2025-04-26 1:13 ` E Shattow
2025-04-26 14:14 ` Tom Rini
2025-04-27 7:47 ` E Shattow
2025-03-25 6:19 Leo Liang
2025-03-25 20:18 ` Tom Rini
2025-03-06 12:18 Leo Liang
2025-03-07 11:20 ` Yao Zi
2025-02-20 5:13 Leo Liang
2025-02-20 17:19 ` Tom Rini
2025-02-03 8:17 Leo Liang
2025-02-03 21:26 ` Tom Rini
2025-01-17 1:53 Leo Liang
2025-01-17 17:56 ` Tom Rini
2024-11-27 13:08 Leo Liang
2024-11-27 18:54 ` Tom Rini
2024-11-06 12:12 Leo Liang
2024-11-08 16:51 ` Tom Rini
2024-11-11 13:24 ` Tom Rini
2024-10-29 12:33 Leo Liang
2024-10-29 16:37 ` Tom Rini
2024-10-28 12:24 Leo Liang
2024-10-28 19:33 ` Tom Rini
2024-07-22 8:29 Leo Liang
2024-07-22 19:31 ` Tom Rini
2024-05-30 8:56 Leo Liang
2024-06-03 17:42 ` Tom Rini
2024-05-14 13:28 Leo Liang
2024-05-14 16:14 ` Tom Rini
2024-05-01 16:38 Leo Liang
2024-05-02 14:42 ` Tom Rini
2024-04-09 8:25 Leo Liang
2024-04-10 0:43 ` Tom Rini
2024-03-26 13:22 Leo Liang
2024-03-27 12:12 ` Tom Rini
2024-03-12 8:51 Leo Liang
2024-03-12 18:52 ` Tom Rini
2024-01-31 10:21 Leo Liang
2024-01-31 14:14 ` Tom Rini
2023-12-14 2:38 Leo Yu-Chi Liang(梁育齊)
2023-12-14 12:19 ` Tom Rini
2023-12-14 12:46 ` Leo Liang
2023-12-14 14:39 ` Tom Rini
2023-12-07 13:46 Leo Liang
2023-12-09 20:59 ` Tom Rini
2023-11-02 10:49 Leo Liang
2023-11-02 14:53 ` Tom Rini
2021-02-26 1:53 Leo Liang
2021-02-26 17:40 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aJr1oclCSUMcK3bb@swlinux02 \
--to=ycliang@andestech.com \
--cc=ben.dooks@codethink.co.uk \
--cc=heinrich.schuchardt@canonical.com \
--cc=jamie.gibbons@microchip.com \
--cc=michal.simek@amd.com \
--cc=rick@andestech.com \
--cc=sputnik@on-the-web.ch \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.