All of lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: <intel-gfx@lists.freedesktop.org>,
	<intel-xe@lists.freedesktop.org>, <jani.nikula@linux.intel.com>
Subject: Re: [PATCH 14/16] drm/i915/dp: Add helpers for joiner candidate loops
Date: Thu, 29 Jan 2026 01:00:34 +0200	[thread overview]
Message-ID: <aXqVEocl4wpRCz51@ideak-desk.lan> (raw)
In-Reply-To: <20260128140636.3527799-15-ankit.k.nautiyal@intel.com>

On Wed, Jan 28, 2026 at 07:36:34PM +0530, Ankit Nautiyal wrote:
> Introduce for_each_joiner_candidate(), intel_dp_pick_joiner_candidate() and
> intel_dp_joiner_candidate_valid() to remove duplicated joiner enumeration
> and validity checks across DP SST and MST paths.
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c     | 37 ++++++++-------------
>  drivers/gpu/drm/i915/display/intel_dp.h     | 31 +++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_dp_mst.c | 37 ++++++++-------------
>  3 files changed, 59 insertions(+), 46 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index c1ff92367808..9eba8f90bc90 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -1529,23 +1529,19 @@ intel_dp_mode_valid(struct drm_connector *_connector,
>  	 * Because of this dependency cycle, the only correct approach is to iterate
>  	 * over candidate pipe counts and evaluate each combination.
>  	 */
> -	for (num_pipes = 0; num_pipes < I915_MAX_PIPES; num_pipes++) {
> +	for_each_joiner_candidate(num_pipes) {
>  		int dsc_slice_count = 0;
>  
>  		status = MODE_CLOCK_HIGH;
>  
> -		if (num_pipes == 0) {
> -			if (!connector->force_joined_pipes)
> -				continue;
> -			num_joined_pipes = connector->force_joined_pipes;
> -		} else {
> -			num_joined_pipes = num_pipes;
> -		}
> -
> -		if (!intel_dp_can_join(display, num_joined_pipes))
> +		if (!intel_dp_pick_joiner_candidate(num_pipes,
> +						    connector->force_joined_pipes,
> +						    &num_joined_pipes))
>  			continue;
>  
> -		if (mode->hdisplay > num_joined_pipes * intel_dp_max_hdisplay_per_pipe(display))
> +		if (!intel_dp_joiner_candidate_valid(display,
> +						     mode->hdisplay,
> +						     num_joined_pipes))
>  			continue;

By not allowing to fallback from a forced joined-pipe to a non-forced
one as mentioned earlier (and so you'd iterate num_pipes = 1 ..
I915_MAX_PIPES - 1) you could fold all the above into a
for_each_joiner_candidate(connector, mode, num_pipes) helper and with
that yes, the iterator would make sense simplifying things a lot.

>  
>  		status = intel_pfit_mode_valid(display, mode, output_format, num_joined_pipes);
> @@ -2938,20 +2934,15 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
>  	    !intel_dp_supports_fec(intel_dp, connector, crtc_state))
>  		return -EINVAL;
>  
> -	for (num_pipes = 0; num_pipes < I915_MAX_PIPES; num_pipes++) {
> -		if (num_pipes == 0) {
> -			if (!connector->force_joined_pipes)
> -				continue;
> -			num_joined_pipes = connector->force_joined_pipes;
> -		} else {
> -			num_joined_pipes = num_pipes;
> -		}
> -
> -		if (!intel_dp_can_join(display, num_joined_pipes))
> +	for_each_joiner_candidate(num_pipes) {
> +		if (!intel_dp_pick_joiner_candidate(num_pipes,
> +						    connector->force_joined_pipes,
> +						    &num_joined_pipes))
>  			continue;
>  
> -		if (adjusted_mode->hdisplay >
> -		    num_joined_pipes * intel_dp_max_hdisplay_per_pipe(display))
> +		if (!intel_dp_joiner_candidate_valid(display,
> +						     adjusted_mode->hdisplay,
> +						     num_joined_pipes))
>  			continue;
>  
>  		/*
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> index beef480b7672..111a5d4b3992 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -234,4 +234,35 @@ bool intel_dp_dotclk_valid(struct intel_display *display,
>  			   int dsc_slice_count,
>  			   int num_joined_pipes);
>  
> +#define for_each_joiner_candidate(__num_pipes) \
> +	for ((__num_pipes) = 0; (__num_pipes) < (I915_MAX_PIPES); (__num_pipes)++)
> +
> +static inline bool intel_dp_pick_joiner_candidate(int num_pipes,
> +						  int force_joined_pipes,
> +						  int *num_joined_pipes)
> +{
> +	if (num_pipes == 0) {
> +		if (!force_joined_pipes)
> +			return false;
> +		*num_joined_pipes = force_joined_pipes;
> +	} else {
> +		*num_joined_pipes = num_pipes;
> +	}
> +
> +	return true;
> +}
> +
> +static inline bool intel_dp_joiner_candidate_valid(struct intel_display *display,
> +						   int hdisplay,
> +						   int num_joined_pipes)
> +{
> +	if (!intel_dp_can_join(display, num_joined_pipes))
> +		return false;
> +
> +	if (hdisplay > num_joined_pipes * intel_dp_max_hdisplay_per_pipe(display))
> +		return false;
> +
> +	return true;
> +}
> +
>  #endif /* __INTEL_DP_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index bdf2f09fa03e..005efcb5d2bf 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -701,24 +701,19 @@ static int mst_stream_compute_config(struct intel_encoder *encoder,
>  	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	pipe_config->has_pch_encoder = false;
>  
> -	for (num_pipes = 0; num_pipes < I915_MAX_PIPES; num_pipes++) {
> +	for_each_joiner_candidate(num_pipes) {
>  		int dsc_slice_count = 0;
>  
>  		ret = -EINVAL;
>  
> -		if (num_pipes == 0) {
> -			if (!connector->force_joined_pipes)
> -				continue;
> -			num_joined_pipes = connector->force_joined_pipes;
> -		} else {
> -			num_joined_pipes = num_pipes;
> -		}
> -
> -		if (!intel_dp_can_join(display, num_joined_pipes))
> +		if (!intel_dp_pick_joiner_candidate(num_pipes,
> +						    connector->force_joined_pipes,
> +						    &num_joined_pipes))
>  			continue;
>  
> -		if (adjusted_mode->hdisplay >
> -		    num_joined_pipes * intel_dp_max_hdisplay_per_pipe(display))
> +		if (!intel_dp_joiner_candidate_valid(display,
> +						     adjusted_mode->hdisplay,
> +						     num_joined_pipes))
>  			continue;
>  
>  		if (num_joined_pipes > 1)
> @@ -1535,23 +1530,19 @@ mst_connector_mode_valid_ctx(struct drm_connector *_connector,
>  		return 0;
>  	}
>  
> -	for (num_pipes = 0; num_pipes < I915_MAX_PIPES; num_pipes++) {
> +	for_each_joiner_candidate(num_pipes) {
>  		int dsc_slice_count = 0;
>  
>  		*status = MODE_CLOCK_HIGH;
>  
> -		if (num_pipes == 0) {
> -			if (!connector->force_joined_pipes)
> -				continue;
> -			num_joined_pipes = connector->force_joined_pipes;
> -		} else {
> -			num_joined_pipes = num_pipes;
> -		}
> -
> -		if (!intel_dp_can_join(display, num_joined_pipes))
> +		if (!intel_dp_pick_joiner_candidate(num_pipes,
> +						    connector->force_joined_pipes,
> +						    &num_joined_pipes))
>  			continue;
>  
> -		if (mode->hdisplay > num_joined_pipes * intel_dp_max_hdisplay_per_pipe(display))
> +		if (!intel_dp_joiner_candidate_valid(display,
> +						     mode->hdisplay,
> +						     num_joined_pipes))
>  			continue;
>  
>  		if (intel_dp_has_dsc(connector) &&
> -- 
> 2.45.2
> 

  reply	other threads:[~2026-01-28 23:00 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-28 14:06 [PATCH 00/16] Account for DSC bubble overhead for horizontal slices Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 01/16] drm/i915/dp: Early reject bad hdisplay in intel_dp_mode_valid Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 02/16] drm/i915/dp: Move num_joined_pipes and related checks together Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 03/16] drm/i915/dp: Extract helper to get the hdisplay limit Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 04/16] drm/i915/dp: Rework pipe joiner logic in mode_valid Ankit Nautiyal
2026-01-28 16:46   ` Imre Deak
2026-01-29  5:21     ` Nautiyal, Ankit K
2026-01-29  5:48       ` Nautiyal, Ankit K
2026-01-29  9:24         ` Imre Deak
2026-01-29 10:01           ` Nautiyal, Ankit K
2026-01-28 14:06 ` [PATCH 05/16] drm/i915/dp: Rework pipe joiner logic in compute_config Ankit Nautiyal
2026-01-28 17:03   ` Imre Deak
2026-01-28 14:06 ` [PATCH 06/16] drm/i915/dp_mst: Move the check for dotclock at the end Ankit Nautiyal
2026-01-28 17:07   ` Imre Deak
2026-01-28 14:06 ` [PATCH 07/16] drm/i915/dp_mst: Move the joiner dependent code together Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 08/16] drm/i915/dp_mst: Rework pipe joiner logic in mode_valid Ankit Nautiyal
2026-01-28 21:21   ` Imre Deak
2026-01-28 14:06 ` [PATCH 09/16] drm/i915/dp_mst: Extract helper to compute link for given joiner config Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 10/16] drm/i915/dp_mst: Rework pipe joiner logic in compute_config Ankit Nautiyal
2026-01-28 22:06   ` Imre Deak
2026-01-28 22:11     ` Imre Deak
2026-01-28 14:06 ` [PATCH 11/16] drm/i915/dp: Introduce helper to check pixel rate against dotclock limits Ankit Nautiyal
2026-01-28 22:17   ` Imre Deak
2026-01-29  3:57   ` kernel test robot
2026-01-28 14:06 ` [PATCH 12/16] drm/i915/dp: Refactor dsc_slice_count handling in intel_dp_mode_valid() Ankit Nautiyal
2026-01-28 22:19   ` Imre Deak
2026-01-28 14:06 ` [PATCH 13/16] drm/i915/dp: Account for DSC slice overhead Ankit Nautiyal
2026-01-28 22:35   ` Imre Deak
2026-01-28 14:06 ` [PATCH 14/16] drm/i915/dp: Add helpers for joiner candidate loops Ankit Nautiyal
2026-01-28 23:00   ` Imre Deak [this message]
2026-01-28 14:06 ` [PATCH 15/16] drm/i915/display: Add upper limit check for pixel clock Ankit Nautiyal
2026-01-28 20:49   ` Imre Deak
2026-01-28 14:06 ` [PATCH 16/16] drm/i915/display: Extend the max dotclock limit to WCL and pre PTL platforms Ankit Nautiyal
2026-01-28 20:53   ` Imre Deak
2026-01-28 15:13 ` ✓ i915.CI.BAT: success for Account for DSC bubble overhead for horizontal slices (rev4) Patchwork
2026-01-28 19:02 ` ✗ CI.checkpatch: warning " Patchwork
2026-01-28 19:03 ` ✓ CI.KUnit: success " Patchwork
2026-01-28 19:19 ` ✗ CI.checksparse: warning " Patchwork
2026-01-28 19:38 ` ✓ Xe.CI.BAT: success " Patchwork
2026-01-28 20:04 ` ✗ i915.CI.Full: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aXqVEocl4wpRCz51@ideak-desk.lan \
    --to=imre.deak@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.