RE: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

["Humphreys, Jonathan" <j-humphreys@ti.com>]

I don't think the layer changes will have any impact on it.

+Denys


-----Original Message-----
From: Eatmon, Ryan <reatmon@ti.com> 
Sent: Monday, June 27, 2022 11:00 AM
To: Humphreys, Jonathan <j-humphreys@ti.com>; meta-arago@lists.yoctoproject.org
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3


It is not applied in master yet.  I have not had time to keep it in sync with dunfell given all of the layer changes.  I believe Denys will be doing another sync up soon.



On 6/26/2022 15:18, Humphreys, Jonathan wrote:
> Ryan, I do not see this patch applied to master.  Can you check?
> 
> Thanks
> Jon
> 
> -----Original Message-----
> From: meta-arago@lists.yoctoproject.org 
> <meta-arago@lists.yoctoproject.org> On Behalf Of Jonathan Humphreys 
> via lists.yoctoproject.org
> Sent: Monday, June 13, 2022 11:18 AM
> To: meta-arago@lists.yoctoproject.org
> Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: 
> remove uEnv.txt for k3
> 
> On Thu, Jun  9, 2022 at 10:05 AM, Andrew Davis wrote:
> 
>>
>> This fixup should have been done in u-boot and not in a uEnv.txt file.
>> It is not correct for all K3 anymore either. Remove it.
>>
>> Signed-off-by: Andrew Davis <afd@ti.com>
>> ---
>>
>> Changes from v1:
>>   - Subject s/tiusdk-uenv/tisdk-uenv
>>
>>   .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
>>   1 file changed, 19 deletions(-)
>>   delete mode 100644
>> meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>>
>> diff --git
>> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>> b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>> deleted file mode 100644
>> index 80ea34f5..00000000
>> ---
>> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>> +++ /dev/null
>> @@ -1,19 +0,0 @@
>> -# This uEnv.txt file can contain additional environment settings 
>> that you -# want to set in U-Boot at boot time.  This can be simple 
>> variables such -# as the serverip or custom variables.  The format of this file is:
>> -#    variable=value
>> -# NOTE: This file will be evaluated after the bootcmd is run and the
>> -#       bootcmd must be set to load this file if it exists (this is the
>> -#       default on all newer U-Boot images.  This also means that some
>> -#       variables such as bootdelay cannot be changed by this file since
>> -#       it is not evaluated until the bootcmd is run.
>> -
> 
> Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
> 
>> -# The specific board is not able to be automatically detected. The 
>> below is a -# workaround to set a sane default incase the user has 
>> not manually configured -# a specific board.
>> -def_board_name="am65x"
>> -
>> -# Check if using default board_name when name_overlays is not set 
>> -check_for_board=if test $name_overlays; then echo "Using board_name 
>> = $board_name"; else setenv board_name $def_board_name; fi
>> -
>> -uenvcmd=run check_for_board; run findfdt
>> --
>> 2.36.1
>>
>>
> 
> 
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#13896): 
> https://lists.yoctoproject.org/g/meta-arago/message/13896
> Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
> Group Owner: meta-arago+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub 
> [j-humphreys@ti.com]
> -=-=-=-=-=-=-=-=-=-=-=-
> 
> 

-- 
Ryan Eatmon                reatmon@ti.com
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS