[meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

[meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

[Andrew Davis]

This fixup should have been done in u-boot and not in a uEnv.txt
file. It is not correct for all K3 anymore either. Remove it.

Signed-off-by: Andrew Davis <afd@ti.com>
---

Changes from v1:
 - Subject s/tiusdk-uenv/tisdk-uenv

 .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
 1 file changed, 19 deletions(-)
 delete mode 100644 meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt

diff --git a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
deleted file mode 100644
index 80ea34f5..00000000
--- a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-# This uEnv.txt file can contain additional environment settings that you
-# want to set in U-Boot at boot time.  This can be simple variables such
-# as the serverip or custom variables.  The format of this file is:
-#    variable=value
-# NOTE: This file will be evaluated after the bootcmd is run and the
-#       bootcmd must be set to load this file if it exists (this is the
-#       default on all newer U-Boot images.  This also means that some
-#       variables such as bootdelay cannot be changed by this file since
-#       it is not evaluated until the bootcmd is run.
-
-# The specific board is not able to be automatically detected. The below is a
-# workaround to set a sane default incase the user has not manually configured
-# a specific board.
-def_board_name="am65x"
-
-# Check if using default board_name when name_overlays is not set
-check_for_board=if test $name_overlays; then echo "Using board_name = $board_name"; else setenv board_name $def_board_name; fi
-
-uenvcmd=run check_for_board; run findfdt
-- 
2.36.1

Re: [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

[Jonathan Humphreys]

On Thu, Jun  9, 2022 at 10:05 AM, Andrew Davis wrote:

>
> This fixup should have been done in u-boot and not in a uEnv.txt
> file. It is not correct for all K3 anymore either. Remove it.
> 
> Signed-off-by: Andrew Davis <afd@ti.com>
> ---
> 
> Changes from v1:
>  - Subject s/tiusdk-uenv/tisdk-uenv
> 
>  .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
>  1 file changed, 19 deletions(-)
>  delete mode 100644
> meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> 
> diff --git a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> deleted file mode 100644
> index 80ea34f5..00000000
> --- a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -# This uEnv.txt file can contain additional environment settings that you
> -# want to set in U-Boot at boot time.  This can be simple variables such
> -# as the serverip or custom variables.  The format of this file is:
> -#    variable=value
> -# NOTE: This file will be evaluated after the bootcmd is run and the
> -#       bootcmd must be set to load this file if it exists (this is the
> -#       default on all newer U-Boot images.  This also means that some
> -#       variables such as bootdelay cannot be changed by this file since
> -#       it is not evaluated until the bootcmd is run.
> -

Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?

> -# The specific board is not able to be automatically detected. The below is a
> -# workaround to set a sane default incase the user has not manually
> configured
> -# a specific board.
> -def_board_name="am65x"
> -
> -# Check if using default board_name when name_overlays is not set
> -check_for_board=if test $name_overlays; then echo "Using board_name =
> $board_name"; else setenv board_name $def_board_name; fi
> -
> -uenvcmd=run check_for_board; run findfdt
> -- 
> 2.36.1
> 
>

RE: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

[Humphreys, Jonathan]

Ryan, I do not see this patch applied to master.  Can you check?

Thanks
Jon

-----Original Message-----
From: meta-arago@lists.yoctoproject.org <meta-arago@lists.yoctoproject.org> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: meta-arago@lists.yoctoproject.org
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

On Thu, Jun  9, 2022 at 10:05 AM, Andrew Davis wrote:

>
> This fixup should have been done in u-boot and not in a uEnv.txt file. 
> It is not correct for all K3 anymore either. Remove it.
> 
> Signed-off-by: Andrew Davis <afd@ti.com>
> ---
> 
> Changes from v1:
>  - Subject s/tiusdk-uenv/tisdk-uenv
> 
>  .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
>  1 file changed, 19 deletions(-)
>  delete mode 100644
> meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> 
> diff --git 
> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> deleted file mode 100644
> index 80ea34f5..00000000
> --- 
> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -# This uEnv.txt file can contain additional environment settings that 
> you -# want to set in U-Boot at boot time.  This can be simple 
> variables such -# as the serverip or custom variables.  The format of this file is:
> -#    variable=value
> -# NOTE: This file will be evaluated after the bootcmd is run and the
> -#       bootcmd must be set to load this file if it exists (this is the
> -#       default on all newer U-Boot images.  This also means that some
> -#       variables such as bootdelay cannot be changed by this file since
> -#       it is not evaluated until the bootcmd is run.
> -

Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?

> -# The specific board is not able to be automatically detected. The 
> below is a -# workaround to set a sane default incase the user has not 
> manually configured -# a specific board.
> -def_board_name="am65x"
> -
> -# Check if using default board_name when name_overlays is not set 
> -check_for_board=if test $name_overlays; then echo "Using board_name = 
> $board_name"; else setenv board_name $def_board_name; fi
> -
> -uenvcmd=run check_for_board; run findfdt
> --
> 2.36.1
> 
>


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#13896): https://lists.yoctoproject.org/g/meta-arago/message/13896
Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
Group Owner: meta-arago+owner@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [j-humphreys@ti.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

[Ryan Eatmon]

It is not applied in master yet.  I have not had time to keep it in sync 
with dunfell given all of the layer changes.  I believe Denys will be 
doing another sync up soon.



On 6/26/2022 15:18, Humphreys, Jonathan wrote:
> Ryan, I do not see this patch applied to master.  Can you check?
> 
> Thanks
> Jon
> 
> -----Original Message-----
> From: meta-arago@lists.yoctoproject.org <meta-arago@lists.yoctoproject.org> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
> Sent: Monday, June 13, 2022 11:18 AM
> To: meta-arago@lists.yoctoproject.org
> Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
> 
> On Thu, Jun  9, 2022 at 10:05 AM, Andrew Davis wrote:
> 
>>
>> This fixup should have been done in u-boot and not in a uEnv.txt file.
>> It is not correct for all K3 anymore either. Remove it.
>>
>> Signed-off-by: Andrew Davis <afd@ti.com>
>> ---
>>
>> Changes from v1:
>>   - Subject s/tiusdk-uenv/tisdk-uenv
>>
>>   .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
>>   1 file changed, 19 deletions(-)
>>   delete mode 100644
>> meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>>
>> diff --git
>> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>> b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>> deleted file mode 100644
>> index 80ea34f5..00000000
>> ---
>> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>> +++ /dev/null
>> @@ -1,19 +0,0 @@
>> -# This uEnv.txt file can contain additional environment settings that
>> you -# want to set in U-Boot at boot time.  This can be simple
>> variables such -# as the serverip or custom variables.  The format of this file is:
>> -#    variable=value
>> -# NOTE: This file will be evaluated after the bootcmd is run and the
>> -#       bootcmd must be set to load this file if it exists (this is the
>> -#       default on all newer U-Boot images.  This also means that some
>> -#       variables such as bootdelay cannot be changed by this file since
>> -#       it is not evaluated until the bootcmd is run.
>> -
> 
> Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
> 
>> -# The specific board is not able to be automatically detected. The
>> below is a -# workaround to set a sane default incase the user has not
>> manually configured -# a specific board.
>> -def_board_name="am65x"
>> -
>> -# Check if using default board_name when name_overlays is not set
>> -check_for_board=if test $name_overlays; then echo "Using board_name =
>> $board_name"; else setenv board_name $def_board_name; fi
>> -
>> -uenvcmd=run check_for_board; run findfdt
>> --
>> 2.36.1
>>
>>
> 
> 
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#13896): https://lists.yoctoproject.org/g/meta-arago/message/13896
> Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
> Group Owner: meta-arago+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [j-humphreys@ti.com]
> -=-=-=-=-=-=-=-=-=-=-=-
> 
> 

-- 
Ryan Eatmon                reatmon@ti.com
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS

RE: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

[Humphreys, Jonathan]

I don't think the layer changes will have any impact on it.

+Denys


-----Original Message-----
From: Eatmon, Ryan <reatmon@ti.com> 
Sent: Monday, June 27, 2022 11:00 AM
To: Humphreys, Jonathan <j-humphreys@ti.com>; meta-arago@lists.yoctoproject.org
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3


It is not applied in master yet.  I have not had time to keep it in sync with dunfell given all of the layer changes.  I believe Denys will be doing another sync up soon.



On 6/26/2022 15:18, Humphreys, Jonathan wrote:
> Ryan, I do not see this patch applied to master.  Can you check?
> 
> Thanks
> Jon
> 
> -----Original Message-----
> From: meta-arago@lists.yoctoproject.org 
> <meta-arago@lists.yoctoproject.org> On Behalf Of Jonathan Humphreys 
> via lists.yoctoproject.org
> Sent: Monday, June 13, 2022 11:18 AM
> To: meta-arago@lists.yoctoproject.org
> Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: 
> remove uEnv.txt for k3
> 
> On Thu, Jun  9, 2022 at 10:05 AM, Andrew Davis wrote:
> 
>>
>> This fixup should have been done in u-boot and not in a uEnv.txt file.
>> It is not correct for all K3 anymore either. Remove it.
>>
>> Signed-off-by: Andrew Davis <afd@ti.com>
>> ---
>>
>> Changes from v1:
>>   - Subject s/tiusdk-uenv/tisdk-uenv
>>
>>   .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
>>   1 file changed, 19 deletions(-)
>>   delete mode 100644
>> meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>>
>> diff --git
>> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>> b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>> deleted file mode 100644
>> index 80ea34f5..00000000
>> ---
>> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>> +++ /dev/null
>> @@ -1,19 +0,0 @@
>> -# This uEnv.txt file can contain additional environment settings 
>> that you -# want to set in U-Boot at boot time.  This can be simple 
>> variables such -# as the serverip or custom variables.  The format of this file is:
>> -#    variable=value
>> -# NOTE: This file will be evaluated after the bootcmd is run and the
>> -#       bootcmd must be set to load this file if it exists (this is the
>> -#       default on all newer U-Boot images.  This also means that some
>> -#       variables such as bootdelay cannot be changed by this file since
>> -#       it is not evaluated until the bootcmd is run.
>> -
> 
> Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
> 
>> -# The specific board is not able to be automatically detected. The 
>> below is a -# workaround to set a sane default incase the user has 
>> not manually configured -# a specific board.
>> -def_board_name="am65x"
>> -
>> -# Check if using default board_name when name_overlays is not set 
>> -check_for_board=if test $name_overlays; then echo "Using board_name 
>> = $board_name"; else setenv board_name $def_board_name; fi
>> -
>> -uenvcmd=run check_for_board; run findfdt
>> --
>> 2.36.1
>>
>>
> 
> 
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#13896): 
> https://lists.yoctoproject.org/g/meta-arago/message/13896
> Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
> Group Owner: meta-arago+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub 
> [j-humphreys@ti.com]
> -=-=-=-=-=-=-=-=-=-=-=-
> 
> 

-- 
Ryan Eatmon                reatmon@ti.com
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS

Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

[Ryan Eatmon]

Not this one, but there are a number of other patches in line before it 
that might be.


On 6/27/2022 11:02, Humphreys, Jonathan wrote:
> I don't think the layer changes will have any impact on it.
> 
> +Denys
> 
> 
> -----Original Message-----
> From: Eatmon, Ryan <reatmon@ti.com>
> Sent: Monday, June 27, 2022 11:00 AM
> To: Humphreys, Jonathan <j-humphreys@ti.com>; meta-arago@lists.yoctoproject.org
> Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
> 
> 
> It is not applied in master yet.  I have not had time to keep it in sync with dunfell given all of the layer changes.  I believe Denys will be doing another sync up soon.
> 
> 
> 
> On 6/26/2022 15:18, Humphreys, Jonathan wrote:
>> Ryan, I do not see this patch applied to master.  Can you check?
>>
>> Thanks
>> Jon
>>
>> -----Original Message-----
>> From: meta-arago@lists.yoctoproject.org
>> <meta-arago@lists.yoctoproject.org> On Behalf Of Jonathan Humphreys
>> via lists.yoctoproject.org
>> Sent: Monday, June 13, 2022 11:18 AM
>> To: meta-arago@lists.yoctoproject.org
>> Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv:
>> remove uEnv.txt for k3
>>
>> On Thu, Jun  9, 2022 at 10:05 AM, Andrew Davis wrote:
>>
>>>
>>> This fixup should have been done in u-boot and not in a uEnv.txt file.
>>> It is not correct for all K3 anymore either. Remove it.
>>>
>>> Signed-off-by: Andrew Davis <afd@ti.com>
>>> ---
>>>
>>> Changes from v1:
>>>    - Subject s/tiusdk-uenv/tisdk-uenv
>>>
>>>    .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
>>>    1 file changed, 19 deletions(-)
>>>    delete mode 100644
>>> meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>>>
>>> diff --git
>>> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>>> b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>>> deleted file mode 100644
>>> index 80ea34f5..00000000
>>> ---
>>> a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
>>> +++ /dev/null
>>> @@ -1,19 +0,0 @@
>>> -# This uEnv.txt file can contain additional environment settings
>>> that you -# want to set in U-Boot at boot time.  This can be simple
>>> variables such -# as the serverip or custom variables.  The format of this file is:
>>> -#    variable=value
>>> -# NOTE: This file will be evaluated after the bootcmd is run and the
>>> -#       bootcmd must be set to load this file if it exists (this is the
>>> -#       default on all newer U-Boot images.  This also means that some
>>> -#       variables such as bootdelay cannot be changed by this file since
>>> -#       it is not evaluated until the bootcmd is run.
>>> -
>>
>> Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
>>
>>> -# The specific board is not able to be automatically detected. The
>>> below is a -# workaround to set a sane default incase the user has
>>> not manually configured -# a specific board.
>>> -def_board_name="am65x"
>>> -
>>> -# Check if using default board_name when name_overlays is not set
>>> -check_for_board=if test $name_overlays; then echo "Using board_name
>>> = $board_name"; else setenv board_name $def_board_name; fi
>>> -
>>> -uenvcmd=run check_for_board; run findfdt
>>> --
>>> 2.36.1
>>>
>>>
>>
>>
>> -=-=-=-=-=-=-=-=-=-=-=-
>> Links: You receive all messages sent to this group.
>> View/Reply Online (#13896):
>> https://lists.yoctoproject.org/g/meta-arago/message/13896
>> Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
>> Group Owner: meta-arago+owner@lists.yoctoproject.org
>> Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub
>> [j-humphreys@ti.com]
>> -=-=-=-=-=-=-=-=-=-=-=-
>>
>>
> 

-- 
Ryan Eatmon                reatmon@ti.com
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS

Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

[Denys Dmytriyenko]

Jon,

This particular change is rather trivial, indeed.

Other changes are more involved due to override syntax change and meta-ti 
restructure. I am collecting recent changes in Dunfell and will do another 
sync with Kirkstone/master soon.

-- 
Denys


On Mon, Jun 27, 2022 at 11:07:17AM -0500, Ryan Eatmon via lists.yoctoproject.org wrote:
> 
> Not this one, but there are a number of other patches in line before
> it that might be.
> 
> 
> On 6/27/2022 11:02, Humphreys, Jonathan wrote:
> >I don't think the layer changes will have any impact on it.
> >
> >+Denys
> >
> >
> >-----Original Message-----
> >From: Eatmon, Ryan <reatmon@ti.com>
> >Sent: Monday, June 27, 2022 11:00 AM
> >To: Humphreys, Jonathan <j-humphreys@ti.com>; meta-arago@lists.yoctoproject.org
> >Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
> >
> >
> >It is not applied in master yet.  I have not had time to keep it in sync with dunfell given all of the layer changes.  I believe Denys will be doing another sync up soon.
> >
> >
> >
> >On 6/26/2022 15:18, Humphreys, Jonathan wrote:
> >>Ryan, I do not see this patch applied to master.  Can you check?
> >>
> >>Thanks
> >>Jon
> >>
> >>-----Original Message-----
> >>From: meta-arago@lists.yoctoproject.org
> >><meta-arago@lists.yoctoproject.org> On Behalf Of Jonathan Humphreys
> >>via lists.yoctoproject.org
> >>Sent: Monday, June 13, 2022 11:18 AM
> >>To: meta-arago@lists.yoctoproject.org
> >>Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv:
> >>remove uEnv.txt for k3
> >>
> >>On Thu, Jun  9, 2022 at 10:05 AM, Andrew Davis wrote:
> >>
> >>>
> >>>This fixup should have been done in u-boot and not in a uEnv.txt file.
> >>>It is not correct for all K3 anymore either. Remove it.
> >>>
> >>>Signed-off-by: Andrew Davis <afd@ti.com>
> >>>---
> >>>
> >>>Changes from v1:
> >>>   - Subject s/tiusdk-uenv/tisdk-uenv
> >>>
> >>>   .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
> >>>   1 file changed, 19 deletions(-)
> >>>   delete mode 100644
> >>>meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> >>>
> >>>diff --git
> >>>a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> >>>b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> >>>deleted file mode 100644
> >>>index 80ea34f5..00000000
> >>>---
> >>>a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
> >>>+++ /dev/null
> >>>@@ -1,19 +0,0 @@
> >>>-# This uEnv.txt file can contain additional environment settings
> >>>that you -# want to set in U-Boot at boot time.  This can be simple
> >>>variables such -# as the serverip or custom variables.  The format of this file is:
> >>>-#    variable=value
> >>>-# NOTE: This file will be evaluated after the bootcmd is run and the
> >>>-#       bootcmd must be set to load this file if it exists (this is the
> >>>-#       default on all newer U-Boot images.  This also means that some
> >>>-#       variables such as bootdelay cannot be changed by this file since
> >>>-#       it is not evaluated until the bootcmd is run.
> >>>-
> >>
> >>Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
> >>
> >>>-# The specific board is not able to be automatically detected. The
> >>>below is a -# workaround to set a sane default incase the user has
> >>>not manually configured -# a specific board.
> >>>-def_board_name="am65x"
> >>>-
> >>>-# Check if using default board_name when name_overlays is not set
> >>>-check_for_board=if test $name_overlays; then echo "Using board_name
> >>>= $board_name"; else setenv board_name $def_board_name; fi
> >>>-
> >>>-uenvcmd=run check_for_board; run findfdt
> >>>--
> >>>2.36.1

Re: [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt

[PRC Automation]

meta-arago / na / 20220609170520.31162-1-afd

PRC Results: FAIL

=========================================================
  check-yocto-patches: PASS
=========================================================
Patches
----------------------------------------
All patches passed



=========================================================
  apply-yocto-patch: FAIL
=========================================================
dunfell
=====================
Summary:
- Patch Series: [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
- Submitter: From: Andrew Davis <afd@ti.com>
- Date: Date: Thu, 9 Jun 2022 12:05:20 -0500
- Num Patches: 1
- Mailing List (public inbox) Commit SHA: 8da349cb70fe1f8fe4aeea255ccd9fea800459c5

Applied to:
- Repository: lcpd-prc-meta-arago
- Base Branch: dunfell
- Commit Author: Randolph Sapp <rs@ti.com>
- Commit Subject: meta-arago-distro: linux-firmware: remove cadence firmware
- Commit SHA: 86d19ced20934c8383c8a39f88d97c72e7e929ee

Patches
----------------------------------------
FAIL - [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
    Applying: tisdk-uenv: remove uEnv.txt for k3
    Patch failed at 0001 tisdk-uenv: remove uEnv.txt for k3
    error: meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt: does not exist in index

master
=====================
Summary:
- Patch Series: [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
- Submitter: From: Andrew Davis <afd@ti.com>
- Date: Date: Thu, 9 Jun 2022 12:05:20 -0500
- Num Patches: 1
- Mailing List (public inbox) Commit SHA: 8da349cb70fe1f8fe4aeea255ccd9fea800459c5

Applied to:
- Repository: lcpd-prc-meta-arago
- Base Branch: master
- Commit Author: LCPD Automation Script <lcpdbld@list.ti.com>
- Commit Subject: CI/CD Auto-Merger: cicd.master.202508010100
- Commit SHA: 644f8b47f0eef26bda636717f5838871ec67d138

Patches
----------------------------------------
FAIL - [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
    Applying: tisdk-uenv: remove uEnv.txt for k3
    Patch failed at 0001 tisdk-uenv: remove uEnv.txt for k3
    error: meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt: does not exist in index