From: Pavel Machek <pavel@nabladev.com>
To: Biju <biju.das.au@gmail.com>
Cc: cip-dev@lists.cip-project.org,
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>,
Pavel Machek <pavel@nabladev.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH 5.10.y-cip 0/4] arm64: dts: renesas: Add max-frequency to SDHI nodes
Date: Wed, 15 Jul 2026 13:01:58 +0200 [thread overview]
Message-ID: <aldopt3Cx04KEM5L@duo.ucw.cz> (raw)
In-Reply-To: <20260713120354.29288-1-biju.das.jz@bp.renesas.com>
[-- Attachment #1: Type: text/plain, Size: 455 bytes --]
Hi!
> This patch series aims to add the max-frequency property set to
> 133333333 Hz (133.33 MHz) to both SDHI0 and SDHI1 MMC controller nodes in
> the RZ/G2{L,LC,UL}/RZ/V2L device tree.
>
> This change results in approximately 33% performance improvement as
> it sets the SD clk to 100 MHz instead of the max 133 MHz.
>
> All the patches in this series are cherry-picked from mainline.
Thank you, applied.
Best regards,
Pavel
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
prev parent reply other threads:[~2026-07-15 11:02 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-13 12:03 [PATCH 5.10.y-cip 0/4] arm64: dts: renesas: Add max-frequency to SDHI nodes Biju
2026-07-13 12:03 ` [PATCH 5.10.y-cip 1/4] arm64: dts: renesas: r9a07g043: " Biju
2026-07-13 12:03 ` [PATCH 5.10.y-cip 2/4] arm64: dts: renesas: r9a07g044: Rename SDHI clocks Biju
2026-07-13 12:03 ` [PATCH 5.10.y-cip 3/4] arm64: dts: renesas: r9a07g044: Add max-frequency to SDHI nodes Biju
2026-07-13 12:03 ` [PATCH 5.10.y-cip 4/4] arm64: dts: renesas: r9a07g054: " Biju
2026-07-13 21:09 ` [PATCH 5.10.y-cip 0/4] arm64: dts: renesas: " Pavel Machek
2026-07-14 6:30 ` Biju Das
2026-07-14 18:33 ` Pavel Machek
2026-07-13 21:13 ` Pavel Machek
2026-07-15 11:01 ` Pavel Machek [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aldopt3Cx04KEM5L@duo.ucw.cz \
--to=pavel@nabladev.com \
--cc=biju.das.au@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro.iwamatsu.x90@mail.toshiba \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.