Re: [PATCH] doc: thead: lpi4a: detail how to enable fastboot

[Yao Zi <me@ziyao.cc>]

On Wed, Jul 15, 2026 at 05:04:04PM +0200, Michael Opdenacker wrote:
> Add that the "BOOT" button must be used
> to switch the board to fastboot mode.
> 
> Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
> ---
>  doc/board/thead/lpi4a.rst | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/doc/board/thead/lpi4a.rst b/doc/board/thead/lpi4a.rst
> index acd7ac2698d..3920efcd710 100644
> --- a/doc/board/thead/lpi4a.rst
> +++ b/doc/board/thead/lpi4a.rst
> @@ -91,8 +91,10 @@ OpenSBI firmware and proper U-Boot.
>  Booting
>  ~~~~~~~
>  
> -u-boot-with-spl.bin should be loaded to SRAM through fastboot. Connect
> -the board to computer with Type-C cable and run
> +u-boot-with-spl.bin should be loaded to SRAM through fastboot.
> +
> +To put the board in fastboot mode, press and hold the ``BOOT`` button,
> +connect the board to the computer with a Type-C cable, release ``BOOT`` and run:
>  
>  .. code-block:: bash
>  
> 
> ---
> base-commit: 8dbe57ba648648c4897717cebbc4505a8e0a8c23
> change-id: 20260715-improve-lpi4a-doc-feed8191d37c
> 
> Best regards,
> --  
> Michael Opdenacker <michael.opdenacker@rootcommit.com>
> 

Reviewed-by: Yao Zi <me@ziyao.cc>

Thanks, this is indeed more clear.

Regards,
Yao Zi