* [PATCH] doc: thead: lpi4a: detail how to enable fastboot
@ 2026-07-15 15:04 Michael Opdenacker
2026-07-16 13:38 ` Yao Zi
0 siblings, 1 reply; 2+ messages in thread
From: Michael Opdenacker @ 2026-07-15 15:04 UTC (permalink / raw)
To: u-boot; +Cc: Wei Fu, Yixun Lan, Tom Rini, Michael Opdenacker
Add that the "BOOT" button must be used
to switch the board to fastboot mode.
Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
---
doc/board/thead/lpi4a.rst | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/doc/board/thead/lpi4a.rst b/doc/board/thead/lpi4a.rst
index acd7ac2698d..3920efcd710 100644
--- a/doc/board/thead/lpi4a.rst
+++ b/doc/board/thead/lpi4a.rst
@@ -91,8 +91,10 @@ OpenSBI firmware and proper U-Boot.
Booting
~~~~~~~
-u-boot-with-spl.bin should be loaded to SRAM through fastboot. Connect
-the board to computer with Type-C cable and run
+u-boot-with-spl.bin should be loaded to SRAM through fastboot.
+
+To put the board in fastboot mode, press and hold the ``BOOT`` button,
+connect the board to the computer with a Type-C cable, release ``BOOT`` and run:
.. code-block:: bash
---
base-commit: 8dbe57ba648648c4897717cebbc4505a8e0a8c23
change-id: 20260715-improve-lpi4a-doc-feed8191d37c
Best regards,
--
Michael Opdenacker <michael.opdenacker@rootcommit.com>
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] doc: thead: lpi4a: detail how to enable fastboot
2026-07-15 15:04 [PATCH] doc: thead: lpi4a: detail how to enable fastboot Michael Opdenacker
@ 2026-07-16 13:38 ` Yao Zi
0 siblings, 0 replies; 2+ messages in thread
From: Yao Zi @ 2026-07-16 13:38 UTC (permalink / raw)
To: Michael Opdenacker, u-boot; +Cc: Wei Fu, Yixun Lan, Tom Rini, Yao Zi
On Wed, Jul 15, 2026 at 05:04:04PM +0200, Michael Opdenacker wrote:
> Add that the "BOOT" button must be used
> to switch the board to fastboot mode.
>
> Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
> ---
> doc/board/thead/lpi4a.rst | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/doc/board/thead/lpi4a.rst b/doc/board/thead/lpi4a.rst
> index acd7ac2698d..3920efcd710 100644
> --- a/doc/board/thead/lpi4a.rst
> +++ b/doc/board/thead/lpi4a.rst
> @@ -91,8 +91,10 @@ OpenSBI firmware and proper U-Boot.
> Booting
> ~~~~~~~
>
> -u-boot-with-spl.bin should be loaded to SRAM through fastboot. Connect
> -the board to computer with Type-C cable and run
> +u-boot-with-spl.bin should be loaded to SRAM through fastboot.
> +
> +To put the board in fastboot mode, press and hold the ``BOOT`` button,
> +connect the board to the computer with a Type-C cable, release ``BOOT`` and run:
>
> .. code-block:: bash
>
>
> ---
> base-commit: 8dbe57ba648648c4897717cebbc4505a8e0a8c23
> change-id: 20260715-improve-lpi4a-doc-feed8191d37c
>
> Best regards,
> --
> Michael Opdenacker <michael.opdenacker@rootcommit.com>
>
Reviewed-by: Yao Zi <me@ziyao.cc>
Thanks, this is indeed more clear.
Regards,
Yao Zi
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-07-16 13:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-15 15:04 [PATCH] doc: thead: lpi4a: detail how to enable fastboot Michael Opdenacker
2026-07-16 13:38 ` Yao Zi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.