actually exercise sub-block direct I/O reads

actually exercise sub-block direct I/O reads

[Christoph Hellwig]

Hi all,

when looking into testing changes that might require a minimum read size
larger than a page size, I realized that various tests hard code
PAGE_SIZE as a direct I/O read size despite claiming that they exercise
sub-block direct I/O.

This series adds support to query the minimum read size and actually uses
that for testing.

[PATCH 1/5] statx.h: update to latest kernel UAPI

[Christoph Hellwig]

Update the localy provided statx definition to the kernel UAPI as of
7.3-rc1.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 src/statx.h | 126 +++++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 96 insertions(+), 30 deletions(-)

diff --git a/src/statx.h b/src/statx.h
index bae1c86f6201..0a27bf030b1d 100644
--- a/src/statx.h
+++ b/src/statx.h
@@ -95,44 +95,97 @@ struct statx_timestamp {
  */
 struct statx {
 	/* 0x00 */
-	__u32	stx_mask;	/* What results were written [uncond] */
-	__u32	stx_blksize;	/* Preferred general I/O size [uncond] */
-	__u64	stx_attributes;	/* Flags conveying information about the file [uncond] */
+	/* What results were written [uncond] */
+	__u32	stx_mask;
+
+	/* Preferred general I/O size [uncond] */
+	__u32	stx_blksize;
+
+	/* Flags conveying information about the file [uncond] */
+	__u64	stx_attributes;
+
 	/* 0x10 */
-	__u32	stx_nlink;	/* Number of hard links */
-	__u32	stx_uid;	/* User ID of owner */
-	__u32	stx_gid;	/* Group ID of owner */
-	__u16	stx_mode;	/* File mode */
+	/* Number of hard links */
+	__u32	stx_nlink;
+
+	/* User ID of owner */
+	__u32	stx_uid;
+
+	/* Group ID of owner */
+	__u32	stx_gid;
+
+	/* File mode */
+	__u16	stx_mode;
 	__u16	__spare0[1];
+
 	/* 0x20 */
-	__u64	stx_ino;	/* Inode number */
-	__u64	stx_size;	/* File size */
-	__u64	stx_blocks;	/* Number of 512-byte blocks allocated */
-	__u64	stx_attributes_mask; /* Mask to show what's supported in stx_attributes */
+	/* Inode number */
+	__u64	stx_ino;
+
+	/* File size */
+	__u64	stx_size;
+
+	/* Number of 512-byte blocks allocated */
+	__u64	stx_blocks;
+
+	/* Mask to show what's supported in stx_attributes */
+	__u64	stx_attributes_mask;
 
 	/* 0x40 */
-	struct statx_timestamp	stx_atime;	/* Last access time */
-	struct statx_timestamp	stx_btime;	/* File creation time */
-	struct statx_timestamp	stx_ctime;	/* Last attribute change time */
-	struct statx_timestamp	stx_mtime;	/* Last data modification time */
+	/* Last access time */
+	struct statx_timestamp	stx_atime;
+
+	/* File creation time */
+	struct statx_timestamp	stx_btime;
+
+	/* Last attribute change time */
+	struct statx_timestamp	stx_ctime;
+
+	/* Last data modification time */
+	struct statx_timestamp	stx_mtime;
+
 	/* 0x80 */
-	__u32	stx_rdev_major;	/* Device ID of special file [if bdev/cdev] */
+	/* Device ID of special file [if bdev/cdev] */
+	__u32	stx_rdev_major;
 	__u32	stx_rdev_minor;
-	__u32	stx_dev_major;	/* ID of device containing file [uncond] */
+
+	/* ID of device containing file [uncond] */
+	__u32	stx_dev_major;
 	__u32	stx_dev_minor;
+
 	/* 0x90 */
 	__u64	stx_mnt_id;
-	__u32	stx_dio_mem_align;	/* Memory buffer alignment for direct I/O */
-	__u32	stx_dio_offset_align;	/* File offset alignment for direct I/O */
+
+	/* Memory buffer alignment for direct I/O */
+	__u32	stx_dio_mem_align;
+
+	/* File offset alignment for direct I/O */
+	__u32	stx_dio_offset_align;
+
 	/* 0xa0 */
-	__u64	stx_subvol;	/* Subvolume identifier */
-	__u32	stx_atomic_write_unit_min;	/* Min atomic write unit in bytes */
-	__u32	stx_atomic_write_unit_max;	/* Max atomic write unit in bytes */
+	/* Subvolume identifier */
+	__u64	stx_subvol;
+
+	/* Min atomic write unit in bytes */
+	__u32	stx_atomic_write_unit_min;
+
+	/* Max atomic write unit in bytes */
+	__u32	stx_atomic_write_unit_max;
+
 	/* 0xb0 */
-	__u32   stx_atomic_write_segments_max;	/* Max atomic write segment count */
-	__u32   __spare1[1];
-	/* 0xb8 */
-	__u64	__spare3[9];	/* Spare space for future expansion */
+	/* Max atomic write segment count */
+	__u32   stx_atomic_write_segments_max;
+
+	/* File offset alignment for direct I/O reads */
+	__u32	stx_dio_read_offset_align;
+
+	/* Optimised max atomic write unit in bytes */
+	__u32	stx_atomic_write_unit_max_opt;
+	__u32	__spare2[1];
+
+	/* 0xc0 */
+	__u64	__spare3[8];	/* Spare space for future expansion */
+
 	/* 0x100 */
 };
 
@@ -162,19 +215,32 @@ struct statx {
 #define STATX_MNT_ID_UNIQUE	0x00004000U	/* Want/got extended stx_mount_id */
 #define STATX_SUBVOL		0x00008000U	/* Want/got stx_subvol */
 #define STATX_WRITE_ATOMIC	0x00010000U	/* Want/got atomic_write_* fields */
+#define STATX_DIO_READ_ALIGN	0x00020000U	/* Want/got dio read alignment info */
 
-#define STATX_ALL		0x00000fffU	/* All currently supported flags */
+#define STATX__RESERVED		0x80000000U	/* Reserved for future struct statx expansion */
 
+#ifndef __KERNEL__
 /*
- * Attributes to be found in stx_attributes
+ * This is deprecated, and shall remain the same value in the future.  To avoid
+ * confusion please use the equivalent (STATX_BASIC_STATS | STATX_BTIME)
+ * instead.
+ */
+#define STATX_ALL		0x00000fffU
+#endif
+
+/*
+ * Attributes to be found in stx_attributes and masked in stx_attributes_mask.
  *
  * These give information about the features or the state of a file that might
  * be of use to ordinary userspace programs such as GUIs or ls rather than
  * specialised tools.
  *
- * Note that the flags marked [I] correspond to generic FS_IOC_FLAGS
+ * Note that the flags marked [I] correspond to the FS_IOC_SETFLAGS flags
  * semantically.  Where possible, the numerical value is picked to correspond
- * also.
+ * also.  Note that the DAX attribute indicates that the file is in the CPU
+ * direct access state.  It does not correspond to the per-inode flag that
+ * some filesystems support.
+ *
  */
 #define STATX_ATTR_COMPRESSED		0x00000004 /* [I] File is compressed by the fs */
 #define STATX_ATTR_IMMUTABLE		0x00000010 /* [I] File is marked immutable */
-- 
2.53.0

Re: [PATCH 1/5] statx.h: update to latest kernel UAPI

[Darrick J. Wong]

On Mon, Aug 31, 2026 at 09:51:04AM +0300, Christoph Hellwig wrote:
> Update the localy provided statx definition to the kernel UAPI as of
> 7.3-rc1.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Seems fine to me;
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>

--D

> ---
>  src/statx.h | 126 +++++++++++++++++++++++++++++++++++++++-------------
>  1 file changed, 96 insertions(+), 30 deletions(-)
> 
> diff --git a/src/statx.h b/src/statx.h
> index bae1c86f6201..0a27bf030b1d 100644
> --- a/src/statx.h
> +++ b/src/statx.h
> @@ -95,44 +95,97 @@ struct statx_timestamp {
>   */
>  struct statx {
>  	/* 0x00 */
> -	__u32	stx_mask;	/* What results were written [uncond] */
> -	__u32	stx_blksize;	/* Preferred general I/O size [uncond] */
> -	__u64	stx_attributes;	/* Flags conveying information about the file [uncond] */
> +	/* What results were written [uncond] */
> +	__u32	stx_mask;
> +
> +	/* Preferred general I/O size [uncond] */
> +	__u32	stx_blksize;
> +
> +	/* Flags conveying information about the file [uncond] */
> +	__u64	stx_attributes;
> +
>  	/* 0x10 */
> -	__u32	stx_nlink;	/* Number of hard links */
> -	__u32	stx_uid;	/* User ID of owner */
> -	__u32	stx_gid;	/* Group ID of owner */
> -	__u16	stx_mode;	/* File mode */
> +	/* Number of hard links */
> +	__u32	stx_nlink;
> +
> +	/* User ID of owner */
> +	__u32	stx_uid;
> +
> +	/* Group ID of owner */
> +	__u32	stx_gid;
> +
> +	/* File mode */
> +	__u16	stx_mode;
>  	__u16	__spare0[1];
> +
>  	/* 0x20 */
> -	__u64	stx_ino;	/* Inode number */
> -	__u64	stx_size;	/* File size */
> -	__u64	stx_blocks;	/* Number of 512-byte blocks allocated */
> -	__u64	stx_attributes_mask; /* Mask to show what's supported in stx_attributes */
> +	/* Inode number */
> +	__u64	stx_ino;
> +
> +	/* File size */
> +	__u64	stx_size;
> +
> +	/* Number of 512-byte blocks allocated */
> +	__u64	stx_blocks;
> +
> +	/* Mask to show what's supported in stx_attributes */
> +	__u64	stx_attributes_mask;
>  
>  	/* 0x40 */
> -	struct statx_timestamp	stx_atime;	/* Last access time */
> -	struct statx_timestamp	stx_btime;	/* File creation time */
> -	struct statx_timestamp	stx_ctime;	/* Last attribute change time */
> -	struct statx_timestamp	stx_mtime;	/* Last data modification time */
> +	/* Last access time */
> +	struct statx_timestamp	stx_atime;
> +
> +	/* File creation time */
> +	struct statx_timestamp	stx_btime;
> +
> +	/* Last attribute change time */
> +	struct statx_timestamp	stx_ctime;
> +
> +	/* Last data modification time */
> +	struct statx_timestamp	stx_mtime;
> +
>  	/* 0x80 */
> -	__u32	stx_rdev_major;	/* Device ID of special file [if bdev/cdev] */
> +	/* Device ID of special file [if bdev/cdev] */
> +	__u32	stx_rdev_major;
>  	__u32	stx_rdev_minor;
> -	__u32	stx_dev_major;	/* ID of device containing file [uncond] */
> +
> +	/* ID of device containing file [uncond] */
> +	__u32	stx_dev_major;
>  	__u32	stx_dev_minor;
> +
>  	/* 0x90 */
>  	__u64	stx_mnt_id;
> -	__u32	stx_dio_mem_align;	/* Memory buffer alignment for direct I/O */
> -	__u32	stx_dio_offset_align;	/* File offset alignment for direct I/O */
> +
> +	/* Memory buffer alignment for direct I/O */
> +	__u32	stx_dio_mem_align;
> +
> +	/* File offset alignment for direct I/O */
> +	__u32	stx_dio_offset_align;
> +
>  	/* 0xa0 */
> -	__u64	stx_subvol;	/* Subvolume identifier */
> -	__u32	stx_atomic_write_unit_min;	/* Min atomic write unit in bytes */
> -	__u32	stx_atomic_write_unit_max;	/* Max atomic write unit in bytes */
> +	/* Subvolume identifier */
> +	__u64	stx_subvol;
> +
> +	/* Min atomic write unit in bytes */
> +	__u32	stx_atomic_write_unit_min;
> +
> +	/* Max atomic write unit in bytes */
> +	__u32	stx_atomic_write_unit_max;
> +
>  	/* 0xb0 */
> -	__u32   stx_atomic_write_segments_max;	/* Max atomic write segment count */
> -	__u32   __spare1[1];
> -	/* 0xb8 */
> -	__u64	__spare3[9];	/* Spare space for future expansion */
> +	/* Max atomic write segment count */
> +	__u32   stx_atomic_write_segments_max;
> +
> +	/* File offset alignment for direct I/O reads */
> +	__u32	stx_dio_read_offset_align;
> +
> +	/* Optimised max atomic write unit in bytes */
> +	__u32	stx_atomic_write_unit_max_opt;
> +	__u32	__spare2[1];
> +
> +	/* 0xc0 */
> +	__u64	__spare3[8];	/* Spare space for future expansion */
> +
>  	/* 0x100 */
>  };
>  
> @@ -162,19 +215,32 @@ struct statx {
>  #define STATX_MNT_ID_UNIQUE	0x00004000U	/* Want/got extended stx_mount_id */
>  #define STATX_SUBVOL		0x00008000U	/* Want/got stx_subvol */
>  #define STATX_WRITE_ATOMIC	0x00010000U	/* Want/got atomic_write_* fields */
> +#define STATX_DIO_READ_ALIGN	0x00020000U	/* Want/got dio read alignment info */
>  
> -#define STATX_ALL		0x00000fffU	/* All currently supported flags */
> +#define STATX__RESERVED		0x80000000U	/* Reserved for future struct statx expansion */
>  
> +#ifndef __KERNEL__
>  /*
> - * Attributes to be found in stx_attributes
> + * This is deprecated, and shall remain the same value in the future.  To avoid
> + * confusion please use the equivalent (STATX_BASIC_STATS | STATX_BTIME)
> + * instead.
> + */
> +#define STATX_ALL		0x00000fffU
> +#endif
> +
> +/*
> + * Attributes to be found in stx_attributes and masked in stx_attributes_mask.
>   *
>   * These give information about the features or the state of a file that might
>   * be of use to ordinary userspace programs such as GUIs or ls rather than
>   * specialised tools.
>   *
> - * Note that the flags marked [I] correspond to generic FS_IOC_FLAGS
> + * Note that the flags marked [I] correspond to the FS_IOC_SETFLAGS flags
>   * semantically.  Where possible, the numerical value is picked to correspond
> - * also.
> + * also.  Note that the DAX attribute indicates that the file is in the CPU
> + * direct access state.  It does not correspond to the per-inode flag that
> + * some filesystems support.
> + *
>   */
>  #define STATX_ATTR_COMPRESSED		0x00000004 /* [I] File is compressed by the fs */
>  #define STATX_ATTR_IMMUTABLE		0x00000010 /* [I] File is marked immutable */
> -- 
> 2.53.0
> 
> 

Re: [PATCH 1/5] statx.h: update to latest kernel UAPI

[Zorro Lang]

On Mon, Aug 31, 2026 at 09:51:04AM +0300, Christoph Hellwig wrote:
> Update the localy provided statx definition to the kernel UAPI as of

This patch looks good to me, I'll change "localy" to "locally" when I
merge it. Thanks!

Reviewed-by: Zorro Lang <zlang@kernel.org>

> 7.3-rc1.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  src/statx.h | 126 +++++++++++++++++++++++++++++++++++++++-------------
>  1 file changed, 96 insertions(+), 30 deletions(-)
> 
> diff --git a/src/statx.h b/src/statx.h
> index bae1c86f6201..0a27bf030b1d 100644
> --- a/src/statx.h
> +++ b/src/statx.h
> @@ -95,44 +95,97 @@ struct statx_timestamp {
>   */
>  struct statx {
>  	/* 0x00 */
> -	__u32	stx_mask;	/* What results were written [uncond] */
> -	__u32	stx_blksize;	/* Preferred general I/O size [uncond] */
> -	__u64	stx_attributes;	/* Flags conveying information about the file [uncond] */
> +	/* What results were written [uncond] */
> +	__u32	stx_mask;
> +
> +	/* Preferred general I/O size [uncond] */
> +	__u32	stx_blksize;
> +
> +	/* Flags conveying information about the file [uncond] */
> +	__u64	stx_attributes;
> +
>  	/* 0x10 */
> -	__u32	stx_nlink;	/* Number of hard links */
> -	__u32	stx_uid;	/* User ID of owner */
> -	__u32	stx_gid;	/* Group ID of owner */
> -	__u16	stx_mode;	/* File mode */
> +	/* Number of hard links */
> +	__u32	stx_nlink;
> +
> +	/* User ID of owner */
> +	__u32	stx_uid;
> +
> +	/* Group ID of owner */
> +	__u32	stx_gid;
> +
> +	/* File mode */
> +	__u16	stx_mode;
>  	__u16	__spare0[1];
> +
>  	/* 0x20 */
> -	__u64	stx_ino;	/* Inode number */
> -	__u64	stx_size;	/* File size */
> -	__u64	stx_blocks;	/* Number of 512-byte blocks allocated */
> -	__u64	stx_attributes_mask; /* Mask to show what's supported in stx_attributes */
> +	/* Inode number */
> +	__u64	stx_ino;
> +
> +	/* File size */
> +	__u64	stx_size;
> +
> +	/* Number of 512-byte blocks allocated */
> +	__u64	stx_blocks;
> +
> +	/* Mask to show what's supported in stx_attributes */
> +	__u64	stx_attributes_mask;
>  
>  	/* 0x40 */
> -	struct statx_timestamp	stx_atime;	/* Last access time */
> -	struct statx_timestamp	stx_btime;	/* File creation time */
> -	struct statx_timestamp	stx_ctime;	/* Last attribute change time */
> -	struct statx_timestamp	stx_mtime;	/* Last data modification time */
> +	/* Last access time */
> +	struct statx_timestamp	stx_atime;
> +
> +	/* File creation time */
> +	struct statx_timestamp	stx_btime;
> +
> +	/* Last attribute change time */
> +	struct statx_timestamp	stx_ctime;
> +
> +	/* Last data modification time */
> +	struct statx_timestamp	stx_mtime;
> +
>  	/* 0x80 */
> -	__u32	stx_rdev_major;	/* Device ID of special file [if bdev/cdev] */
> +	/* Device ID of special file [if bdev/cdev] */
> +	__u32	stx_rdev_major;
>  	__u32	stx_rdev_minor;
> -	__u32	stx_dev_major;	/* ID of device containing file [uncond] */
> +
> +	/* ID of device containing file [uncond] */
> +	__u32	stx_dev_major;
>  	__u32	stx_dev_minor;
> +
>  	/* 0x90 */
>  	__u64	stx_mnt_id;
> -	__u32	stx_dio_mem_align;	/* Memory buffer alignment for direct I/O */
> -	__u32	stx_dio_offset_align;	/* File offset alignment for direct I/O */
> +
> +	/* Memory buffer alignment for direct I/O */
> +	__u32	stx_dio_mem_align;
> +
> +	/* File offset alignment for direct I/O */
> +	__u32	stx_dio_offset_align;
> +
>  	/* 0xa0 */
> -	__u64	stx_subvol;	/* Subvolume identifier */
> -	__u32	stx_atomic_write_unit_min;	/* Min atomic write unit in bytes */
> -	__u32	stx_atomic_write_unit_max;	/* Max atomic write unit in bytes */
> +	/* Subvolume identifier */
> +	__u64	stx_subvol;
> +
> +	/* Min atomic write unit in bytes */
> +	__u32	stx_atomic_write_unit_min;
> +
> +	/* Max atomic write unit in bytes */
> +	__u32	stx_atomic_write_unit_max;
> +
>  	/* 0xb0 */
> -	__u32   stx_atomic_write_segments_max;	/* Max atomic write segment count */
> -	__u32   __spare1[1];
> -	/* 0xb8 */
> -	__u64	__spare3[9];	/* Spare space for future expansion */
> +	/* Max atomic write segment count */
> +	__u32   stx_atomic_write_segments_max;
> +
> +	/* File offset alignment for direct I/O reads */
> +	__u32	stx_dio_read_offset_align;
> +
> +	/* Optimised max atomic write unit in bytes */
> +	__u32	stx_atomic_write_unit_max_opt;
> +	__u32	__spare2[1];
> +
> +	/* 0xc0 */
> +	__u64	__spare3[8];	/* Spare space for future expansion */
> +
>  	/* 0x100 */
>  };
>  
> @@ -162,19 +215,32 @@ struct statx {
>  #define STATX_MNT_ID_UNIQUE	0x00004000U	/* Want/got extended stx_mount_id */
>  #define STATX_SUBVOL		0x00008000U	/* Want/got stx_subvol */
>  #define STATX_WRITE_ATOMIC	0x00010000U	/* Want/got atomic_write_* fields */
> +#define STATX_DIO_READ_ALIGN	0x00020000U	/* Want/got dio read alignment info */
>  
> -#define STATX_ALL		0x00000fffU	/* All currently supported flags */
> +#define STATX__RESERVED		0x80000000U	/* Reserved for future struct statx expansion */
>  
> +#ifndef __KERNEL__
>  /*
> - * Attributes to be found in stx_attributes
> + * This is deprecated, and shall remain the same value in the future.  To avoid
> + * confusion please use the equivalent (STATX_BASIC_STATS | STATX_BTIME)
> + * instead.
> + */
> +#define STATX_ALL		0x00000fffU
> +#endif
> +
> +/*
> + * Attributes to be found in stx_attributes and masked in stx_attributes_mask.
>   *
>   * These give information about the features or the state of a file that might
>   * be of use to ordinary userspace programs such as GUIs or ls rather than
>   * specialised tools.
>   *
> - * Note that the flags marked [I] correspond to generic FS_IOC_FLAGS
> + * Note that the flags marked [I] correspond to the FS_IOC_SETFLAGS flags
>   * semantically.  Where possible, the numerical value is picked to correspond
> - * also.
> + * also.  Note that the DAX attribute indicates that the file is in the CPU
> + * direct access state.  It does not correspond to the per-inode flag that
> + * some filesystems support.
> + *
>   */
>  #define STATX_ATTR_COMPRESSED		0x00000004 /* [I] File is compressed by the fs */
>  #define STATX_ATTR_IMMUTABLE		0x00000010 /* [I] File is marked immutable */
> -- 
> 2.53.0
> 

[PATCH 2/5] min_dio_alignment: add a -r option to query read alignment

[Christoph Hellwig]

Add an option to query the STATX_DIO_READ_ALIGN if provided.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 src/min_dio_alignment.c | 44 ++++++++++++++++++++++++++++++-----------
 1 file changed, 33 insertions(+), 11 deletions(-)

diff --git a/src/min_dio_alignment.c b/src/min_dio_alignment.c
index 866fba1546c4..143cee684ab4 100644
--- a/src/min_dio_alignment.c
+++ b/src/min_dio_alignment.c
@@ -1,17 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2024 Christoph Hellwig
+ * Copyright (c) 2024,2026 Christoph Hellwig
  */
 #include <fcntl.h>
+#include <stdbool.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <unistd.h>
+#include <getopt.h>
 #include <sys/mount.h>
 #include <sys/ioctl.h>
 #include <sys/stat.h>
 #include "statx.h"
 
-static int min_dio_alignment(const char *mntpnt, const char *devname)
+static int min_dio_alignment(const char *mntpnt, const char *devname, bool read)
 {
 	struct statx stx = { };
 	struct stat st;
@@ -27,9 +29,16 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
 	 */
 	fd = open(mntpnt, O_TMPFILE | O_RDWR | O_EXCL, 0600);
 	if (fd >= 0 &&
-	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0 &&
-	    (stx.stx_mask & STATX_DIOALIGN) && stx.stx_dio_offset_align != 0)
-		return stx.stx_dio_offset_align;
+	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0) {
+		if (read &&
+		    (stx.stx_mask & STATX_DIO_READ_ALIGN) &&
+		    stx.stx_dio_read_offset_align != 0)
+			return stx.stx_dio_read_offset_align;
+
+		if ((stx.stx_mask & STATX_DIOALIGN) &&
+		    stx.stx_dio_offset_align != 0)
+			return stx.stx_dio_offset_align;
+	}
 
 	/*
 	 * If we are on a block device and no explicit aligned is reported, use
@@ -42,9 +51,8 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
 		if (dev_fd > 0 &&
 		    fstat(dev_fd, &st) == 0 &&
 		    S_ISBLK(st.st_mode) &&
-		    ioctl(dev_fd, BLKSSZGET, &logical_block_size) == 0) {
+		    ioctl(dev_fd, BLKSSZGET, &logical_block_size) == 0)
 			return logical_block_size;
-		}
 	}
 
 	/*
@@ -56,11 +64,25 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
 
 int main(int argc, char **argv)
 {
-	if (argc != 3) {
-		fprintf(stderr, "usage: %s mountpoint devicename\n", argv[0]);
-		exit(1);
+	bool read = false;
+	int c;
+
+	while ((c = getopt(argc, argv, "r")) != -1) {
+		switch(c) {
+		case 'r':
+			read = 1;
+			break;
+		default:
+			goto usage;
+		}
 	}
 
-	printf("%d\n", min_dio_alignment(argv[1], argv[2]));
+	if (argc - optind != 2)
+		goto usage;
+
+	printf("%d\n", min_dio_alignment(argv[optind], argv[optind + 1], read));
 	exit(0);
+usage:
+	fprintf(stderr, "usage: %s [-r] mountpoint devicename\n", argv[0]);
+	exit(1);
 }
-- 
2.53.0

Re: [PATCH 2/5] min_dio_alignment: add a -r option to query read alignment

[Darrick J. Wong]

On Mon, Aug 31, 2026 at 09:51:05AM +0300, Christoph Hellwig wrote:
> Add an option to query the STATX_DIO_READ_ALIGN if provided.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

This makes sense to me.  It's sorta nice to have a canonical example of
how you're supposed to access the directio geometry fields :)

Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>

--D

> ---
>  src/min_dio_alignment.c | 44 ++++++++++++++++++++++++++++++-----------
>  1 file changed, 33 insertions(+), 11 deletions(-)
> 
> diff --git a/src/min_dio_alignment.c b/src/min_dio_alignment.c
> index 866fba1546c4..143cee684ab4 100644
> --- a/src/min_dio_alignment.c
> +++ b/src/min_dio_alignment.c
> @@ -1,17 +1,19 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /*
> - * Copyright (c) 2024 Christoph Hellwig
> + * Copyright (c) 2024,2026 Christoph Hellwig
>   */
>  #include <fcntl.h>
> +#include <stdbool.h>
>  #include <stdio.h>
>  #include <stdlib.h>
>  #include <unistd.h>
> +#include <getopt.h>
>  #include <sys/mount.h>
>  #include <sys/ioctl.h>
>  #include <sys/stat.h>
>  #include "statx.h"
>  
> -static int min_dio_alignment(const char *mntpnt, const char *devname)
> +static int min_dio_alignment(const char *mntpnt, const char *devname, bool read)
>  {
>  	struct statx stx = { };
>  	struct stat st;
> @@ -27,9 +29,16 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
>  	 */
>  	fd = open(mntpnt, O_TMPFILE | O_RDWR | O_EXCL, 0600);
>  	if (fd >= 0 &&
> -	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0 &&
> -	    (stx.stx_mask & STATX_DIOALIGN) && stx.stx_dio_offset_align != 0)
> -		return stx.stx_dio_offset_align;
> +	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0) {
> +		if (read &&
> +		    (stx.stx_mask & STATX_DIO_READ_ALIGN) &&
> +		    stx.stx_dio_read_offset_align != 0)
> +			return stx.stx_dio_read_offset_align;
> +
> +		if ((stx.stx_mask & STATX_DIOALIGN) &&
> +		    stx.stx_dio_offset_align != 0)
> +			return stx.stx_dio_offset_align;
> +	}
>  
>  	/*
>  	 * If we are on a block device and no explicit aligned is reported, use
> @@ -42,9 +51,8 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
>  		if (dev_fd > 0 &&
>  		    fstat(dev_fd, &st) == 0 &&
>  		    S_ISBLK(st.st_mode) &&
> -		    ioctl(dev_fd, BLKSSZGET, &logical_block_size) == 0) {
> +		    ioctl(dev_fd, BLKSSZGET, &logical_block_size) == 0)
>  			return logical_block_size;
> -		}
>  	}
>  
>  	/*
> @@ -56,11 +64,25 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
>  
>  int main(int argc, char **argv)
>  {
> -	if (argc != 3) {
> -		fprintf(stderr, "usage: %s mountpoint devicename\n", argv[0]);
> -		exit(1);
> +	bool read = false;
> +	int c;
> +
> +	while ((c = getopt(argc, argv, "r")) != -1) {
> +		switch(c) {
> +		case 'r':
> +			read = 1;
> +			break;
> +		default:
> +			goto usage;
> +		}
>  	}
>  
> -	printf("%d\n", min_dio_alignment(argv[1], argv[2]));
> +	if (argc - optind != 2)
> +		goto usage;
> +
> +	printf("%d\n", min_dio_alignment(argv[optind], argv[optind + 1], read));
>  	exit(0);
> +usage:
> +	fprintf(stderr, "usage: %s [-r] mountpoint devicename\n", argv[0]);
> +	exit(1);
>  }
> -- 
> 2.53.0
> 
> 

Re: [PATCH 2/5] min_dio_alignment: add a -r option to query read alignment

[Zorro Lang]

On Mon, Aug 31, 2026 at 09:51:05AM +0300, Christoph Hellwig wrote:
> Add an option to query the STATX_DIO_READ_ALIGN if provided.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  src/min_dio_alignment.c | 44 ++++++++++++++++++++++++++++++-----------
>  1 file changed, 33 insertions(+), 11 deletions(-)
> 
> diff --git a/src/min_dio_alignment.c b/src/min_dio_alignment.c
> index 866fba1546c4..143cee684ab4 100644
> --- a/src/min_dio_alignment.c
> +++ b/src/min_dio_alignment.c
> @@ -1,17 +1,19 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /*
> - * Copyright (c) 2024 Christoph Hellwig
> + * Copyright (c) 2024,2026 Christoph Hellwig
>   */
>  #include <fcntl.h>
> +#include <stdbool.h>
>  #include <stdio.h>
>  #include <stdlib.h>
>  #include <unistd.h>
> +#include <getopt.h>
>  #include <sys/mount.h>
>  #include <sys/ioctl.h>
>  #include <sys/stat.h>
>  #include "statx.h"
>  
> -static int min_dio_alignment(const char *mntpnt, const char *devname)
> +static int min_dio_alignment(const char *mntpnt, const char *devname, bool read)
>  {
>  	struct statx stx = { };
>  	struct stat st;
> @@ -27,9 +29,16 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
>  	 */
>  	fd = open(mntpnt, O_TMPFILE | O_RDWR | O_EXCL, 0600);
>  	if (fd >= 0 &&
> -	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0 &&
> -	    (stx.stx_mask & STATX_DIOALIGN) && stx.stx_dio_offset_align != 0)
> -		return stx.stx_dio_offset_align;
> +	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0) {


Hmm... shouldn't STATX_DIO_READ_ALIGN be passed in the request mask as well?

  xfstests_statx(fd, "", AT_EMPTY_PATH,
                 STATX_DIOALIGN|STATX_DIO_READ_ALIGN, &stx)

> +		if (read &&
> +		    (stx.stx_mask & STATX_DIO_READ_ALIGN) &&
> +		    stx.stx_dio_read_offset_align != 0)
> +			return stx.stx_dio_read_offset_align;
> +
> +		if ((stx.stx_mask & STATX_DIOALIGN) &&
> +		    stx.stx_dio_offset_align != 0)
> +			return stx.stx_dio_offset_align;
> +	}
>  
>  	/*
>  	 * If we are on a block device and no explicit aligned is reported, use
> @@ -42,9 +51,8 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
>  		if (dev_fd > 0 &&
>  		    fstat(dev_fd, &st) == 0 &&
>  		    S_ISBLK(st.st_mode) &&
> -		    ioctl(dev_fd, BLKSSZGET, &logical_block_size) == 0) {
> +		    ioctl(dev_fd, BLKSSZGET, &logical_block_size) == 0)
>  			return logical_block_size;
> -		}
>  	}
>  
>  	/*
> @@ -56,11 +64,25 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
>  
>  int main(int argc, char **argv)
>  {
> -	if (argc != 3) {
> -		fprintf(stderr, "usage: %s mountpoint devicename\n", argv[0]);
> -		exit(1);
> +	bool read = false;
> +	int c;
> +
> +	while ((c = getopt(argc, argv, "r")) != -1) {
> +		switch(c) {
> +		case 'r':
> +			read = 1;
> +			break;
> +		default:
> +			goto usage;
> +		}
>  	}
>  
> -	printf("%d\n", min_dio_alignment(argv[1], argv[2]));
> +	if (argc - optind != 2)
> +		goto usage;
> +
> +	printf("%d\n", min_dio_alignment(argv[optind], argv[optind + 1], read));
>  	exit(0);
> +usage:
> +	fprintf(stderr, "usage: %s [-r] mountpoint devicename\n", argv[0]);
> +	exit(1);
>  }
> -- 
> 2.53.0
> 

Re: [PATCH 2/5] min_dio_alignment: add a -r option to query read alignment

[Christoph Hellwig]

On Thu, Sep 03, 2026 at 12:26:26AM +0800, Zorro Lang wrote:
> On Mon, Aug 31, 2026 at 09:51:05AM +0300, Christoph Hellwig wrote:
> > Add an option to query the STATX_DIO_READ_ALIGN if provided.
> > 
> > Signed-off-by: Christoph Hellwig <hch@lst.de>
> > ---
> >  src/min_dio_alignment.c | 44 ++++++++++++++++++++++++++++++-----------
> >  1 file changed, 33 insertions(+), 11 deletions(-)
> > 
> > diff --git a/src/min_dio_alignment.c b/src/min_dio_alignment.c
> > index 866fba1546c4..143cee684ab4 100644
> > --- a/src/min_dio_alignment.c
> > +++ b/src/min_dio_alignment.c
> > @@ -1,17 +1,19 @@
> >  // SPDX-License-Identifier: GPL-2.0
> >  /*
> > - * Copyright (c) 2024 Christoph Hellwig
> > + * Copyright (c) 2024,2026 Christoph Hellwig
> >   */
> >  #include <fcntl.h>
> > +#include <stdbool.h>
> >  #include <stdio.h>
> >  #include <stdlib.h>
> >  #include <unistd.h>
> > +#include <getopt.h>
> >  #include <sys/mount.h>
> >  #include <sys/ioctl.h>
> >  #include <sys/stat.h>
> >  #include "statx.h"
> >  
> > -static int min_dio_alignment(const char *mntpnt, const char *devname)
> > +static int min_dio_alignment(const char *mntpnt, const char *devname, bool read)
> >  {
> >  	struct statx stx = { };
> >  	struct stat st;
> > @@ -27,9 +29,16 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
> >  	 */
> >  	fd = open(mntpnt, O_TMPFILE | O_RDWR | O_EXCL, 0600);
> >  	if (fd >= 0 &&
> > -	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0 &&
> > -	    (stx.stx_mask & STATX_DIOALIGN) && stx.stx_dio_offset_align != 0)
> > -		return stx.stx_dio_offset_align;
> > +	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0) {
> 
> 
> Hmm... shouldn't STATX_DIO_READ_ALIGN be passed in the request mask as well?
> 
>   xfstests_statx(fd, "", AT_EMPTY_PATH,
>                  STATX_DIOALIGN|STATX_DIO_READ_ALIGN, &stx)

Yeah, strictly speaking we should.  Currently this is only supported
for XFS, and XFS automatically adds STATX_DIO_READ_ALIGN when
STATX_DIOALIGN is requested, so it works.  But more by chance than
design.

Re: [PATCH 2/5] min_dio_alignment: add a -r option to query read alignment

[Zorro Lang]

On Thu, Sep 03, 2026 at 07:34:09AM +0200, Christoph Hellwig wrote:
> On Thu, Sep 03, 2026 at 12:26:26AM +0800, Zorro Lang wrote:
> > On Mon, Aug 31, 2026 at 09:51:05AM +0300, Christoph Hellwig wrote:
> > > Add an option to query the STATX_DIO_READ_ALIGN if provided.
> > > 
> > > Signed-off-by: Christoph Hellwig <hch@lst.de>
> > > ---
> > >  src/min_dio_alignment.c | 44 ++++++++++++++++++++++++++++++-----------
> > >  1 file changed, 33 insertions(+), 11 deletions(-)
> > > 
> > > diff --git a/src/min_dio_alignment.c b/src/min_dio_alignment.c
> > > index 866fba1546c4..143cee684ab4 100644
> > > --- a/src/min_dio_alignment.c
> > > +++ b/src/min_dio_alignment.c
> > > @@ -1,17 +1,19 @@
> > >  // SPDX-License-Identifier: GPL-2.0
> > >  /*
> > > - * Copyright (c) 2024 Christoph Hellwig
> > > + * Copyright (c) 2024,2026 Christoph Hellwig
> > >   */
> > >  #include <fcntl.h>
> > > +#include <stdbool.h>
> > >  #include <stdio.h>
> > >  #include <stdlib.h>
> > >  #include <unistd.h>
> > > +#include <getopt.h>
> > >  #include <sys/mount.h>
> > >  #include <sys/ioctl.h>
> > >  #include <sys/stat.h>
> > >  #include "statx.h"
> > >  
> > > -static int min_dio_alignment(const char *mntpnt, const char *devname)
> > > +static int min_dio_alignment(const char *mntpnt, const char *devname, bool read)
> > >  {
> > >  	struct statx stx = { };
> > >  	struct stat st;
> > > @@ -27,9 +29,16 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
> > >  	 */
> > >  	fd = open(mntpnt, O_TMPFILE | O_RDWR | O_EXCL, 0600);
> > >  	if (fd >= 0 &&
> > > -	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0 &&
> > > -	    (stx.stx_mask & STATX_DIOALIGN) && stx.stx_dio_offset_align != 0)
> > > -		return stx.stx_dio_offset_align;
> > > +	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0) {
> > 
> > 
> > Hmm... shouldn't STATX_DIO_READ_ALIGN be passed in the request mask as well?
> > 
> >   xfstests_statx(fd, "", AT_EMPTY_PATH,
> >                  STATX_DIOALIGN|STATX_DIO_READ_ALIGN, &stx)
> 
> Yeah, strictly speaking we should.  Currently this is only supported
> for XFS, and XFS automatically adds STATX_DIO_READ_ALIGN when
> STATX_DIOALIGN is requested, so it works.  But more by chance than
> design.

I couldn't find any mention in the statx doc that STATX_DIO_READ_ALIGN is
added by default, explicitly specifying it seems more aligned with how
the mask parameter is intended to work. Would you like me to fold this in
when merging? or did you omit it due to other concerns?

This is the only open point left for the patchset, once we reach consensus,
I'm good to merge it :)

Thanks,
Zorro

> 
> 

Re: [PATCH 2/5] min_dio_alignment: add a -r option to query read alignment

[Zorro Lang]

On Thu, Sep 03, 2026 at 09:39:18PM +0800, Zorro Lang wrote:
> On Thu, Sep 03, 2026 at 07:34:09AM +0200, Christoph Hellwig wrote:
> > On Thu, Sep 03, 2026 at 12:26:26AM +0800, Zorro Lang wrote:
> > > On Mon, Aug 31, 2026 at 09:51:05AM +0300, Christoph Hellwig wrote:
> > > > Add an option to query the STATX_DIO_READ_ALIGN if provided.
> > > > 
> > > > Signed-off-by: Christoph Hellwig <hch@lst.de>
> > > > ---
> > > >  src/min_dio_alignment.c | 44 ++++++++++++++++++++++++++++++-----------
> > > >  1 file changed, 33 insertions(+), 11 deletions(-)
> > > > 
> > > > diff --git a/src/min_dio_alignment.c b/src/min_dio_alignment.c
> > > > index 866fba1546c4..143cee684ab4 100644
> > > > --- a/src/min_dio_alignment.c
> > > > +++ b/src/min_dio_alignment.c
> > > > @@ -1,17 +1,19 @@
> > > >  // SPDX-License-Identifier: GPL-2.0
> > > >  /*
> > > > - * Copyright (c) 2024 Christoph Hellwig
> > > > + * Copyright (c) 2024,2026 Christoph Hellwig
> > > >   */
> > > >  #include <fcntl.h>
> > > > +#include <stdbool.h>
> > > >  #include <stdio.h>
> > > >  #include <stdlib.h>
> > > >  #include <unistd.h>
> > > > +#include <getopt.h>
> > > >  #include <sys/mount.h>
> > > >  #include <sys/ioctl.h>
> > > >  #include <sys/stat.h>
> > > >  #include "statx.h"
> > > >  
> > > > -static int min_dio_alignment(const char *mntpnt, const char *devname)
> > > > +static int min_dio_alignment(const char *mntpnt, const char *devname, bool read)
> > > >  {
> > > >  	struct statx stx = { };
> > > >  	struct stat st;
> > > > @@ -27,9 +29,16 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
> > > >  	 */
> > > >  	fd = open(mntpnt, O_TMPFILE | O_RDWR | O_EXCL, 0600);
> > > >  	if (fd >= 0 &&
> > > > -	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0 &&
> > > > -	    (stx.stx_mask & STATX_DIOALIGN) && stx.stx_dio_offset_align != 0)
> > > > -		return stx.stx_dio_offset_align;
> > > > +	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0) {
> > > 
> > > 
> > > Hmm... shouldn't STATX_DIO_READ_ALIGN be passed in the request mask as well?
> > > 
> > >   xfstests_statx(fd, "", AT_EMPTY_PATH,
> > >                  STATX_DIOALIGN|STATX_DIO_READ_ALIGN, &stx)
> > 
> > Yeah, strictly speaking we should.  Currently this is only supported
> > for XFS, and XFS automatically adds STATX_DIO_READ_ALIGN when
> > STATX_DIOALIGN is requested, so it works.  But more by chance than
> > design.
> 
> I couldn't find any mention in the statx doc that STATX_DIO_READ_ALIGN is
> added by default, explicitly specifying it seems more aligned with how
> the mask parameter is intended to work. Would you like me to fold this in
> when merging? or did you omit it due to other concerns?
> 
> This is the only open point left for the patchset, once we reach consensus,
> I'm good to merge it :)

Hi Christoph, friendly ping, I'm still waiting on your confirmation before
merging this patchset. Would you prefer I keep it as is, or should I add
STATX_DIO_READ_ALIGN?

Thanks,
Zorro

> 
> Thanks,
> Zorro
> 
> > 
> > 
> 

Re: [PATCH 2/5] min_dio_alignment: add a -r option to query read alignment

[Christoph Hellwig]

On Mon, Sep 14, 2026 at 05:44:07PM +0800, Zorro Lang wrote:
> > I couldn't find any mention in the statx doc that STATX_DIO_READ_ALIGN is
> > added by default, explicitly specifying it seems more aligned with how
> > the mask parameter is intended to work. Would you like me to fold this in
> > when merging? or did you omit it due to other concerns?
> > 
> > This is the only open point left for the patchset, once we reach consensus,
> > I'm good to merge it :)
> 
> Hi Christoph, friendly ping, I'm still waiting on your confirmation before
> merging this patchset. Would you prefer I keep it as is, or should I add
> STATX_DIO_READ_ALIGN?

Hi Zorro,

as I wrote in my last mail, passing STATX_DIO_READ_ALIGN is required
by the interface, but on XFS, the only current implementation, it
actually works without that. So yeah, please add it, or wait for me
to resend the series as I've already added it locally.

Re: [PATCH 2/5] min_dio_alignment: add a -r option to query read alignment

[Zorro Lang]

On Mon, Aug 31, 2026 at 09:51:05AM +0300, Christoph Hellwig wrote:
> Add an option to query the STATX_DIO_READ_ALIGN if provided.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  src/min_dio_alignment.c | 44 ++++++++++++++++++++++++++++++-----------
>  1 file changed, 33 insertions(+), 11 deletions(-)
> 
> diff --git a/src/min_dio_alignment.c b/src/min_dio_alignment.c
> index 866fba1546c4..143cee684ab4 100644
> --- a/src/min_dio_alignment.c
> +++ b/src/min_dio_alignment.c
> @@ -1,17 +1,19 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /*
> - * Copyright (c) 2024 Christoph Hellwig
> + * Copyright (c) 2024,2026 Christoph Hellwig
>   */
>  #include <fcntl.h>
> +#include <stdbool.h>
>  #include <stdio.h>
>  #include <stdlib.h>
>  #include <unistd.h>
> +#include <getopt.h>
>  #include <sys/mount.h>
>  #include <sys/ioctl.h>
>  #include <sys/stat.h>
>  #include "statx.h"
>  
> -static int min_dio_alignment(const char *mntpnt, const char *devname)
> +static int min_dio_alignment(const char *mntpnt, const char *devname, bool read)
>  {
>  	struct statx stx = { };
>  	struct stat st;
> @@ -27,9 +29,16 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
>  	 */
>  	fd = open(mntpnt, O_TMPFILE | O_RDWR | O_EXCL, 0600);
>  	if (fd >= 0 &&
> -	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0 &&
> -	    (stx.stx_mask & STATX_DIOALIGN) && stx.stx_dio_offset_align != 0)
> -		return stx.stx_dio_offset_align;
> +	    xfstests_statx(fd, "", AT_EMPTY_PATH, STATX_DIOALIGN, &stx) == 0) {
> +		if (read &&
> +		    (stx.stx_mask & STATX_DIO_READ_ALIGN) &&
> +		    stx.stx_dio_read_offset_align != 0)
> +			return stx.stx_dio_read_offset_align;
> +
> +		if ((stx.stx_mask & STATX_DIOALIGN) &&
> +		    stx.stx_dio_offset_align != 0)
> +			return stx.stx_dio_offset_align;
> +	}
>  
>  	/*
>  	 * If we are on a block device and no explicit aligned is reported, use
> @@ -42,9 +51,8 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
>  		if (dev_fd > 0 &&
>  		    fstat(dev_fd, &st) == 0 &&
>  		    S_ISBLK(st.st_mode) &&
> -		    ioctl(dev_fd, BLKSSZGET, &logical_block_size) == 0) {
> +		    ioctl(dev_fd, BLKSSZGET, &logical_block_size) == 0)
>  			return logical_block_size;
> -		}
>  	}
>  
>  	/*
> @@ -56,11 +64,25 @@ static int min_dio_alignment(const char *mntpnt, const char *devname)
>  
>  int main(int argc, char **argv)
>  {
> -	if (argc != 3) {
> -		fprintf(stderr, "usage: %s mountpoint devicename\n", argv[0]);
> -		exit(1);
> +	bool read = false;
> +	int c;
> +
> +	while ((c = getopt(argc, argv, "r")) != -1) {
> +		switch(c) {
> +		case 'r':
> +			read = 1;

read = true;

> +			break;
> +		default:
> +			goto usage;
> +		}
>  	}
>  
> -	printf("%d\n", min_dio_alignment(argv[1], argv[2]));
> +	if (argc - optind != 2)
> +		goto usage;
> +
> +	printf("%d\n", min_dio_alignment(argv[optind], argv[optind + 1], read));
>  	exit(0);
> +usage:
> +	fprintf(stderr, "usage: %s [-r] mountpoint devicename\n", argv[0]);
> +	exit(1);
>  }
> -- 
> 2.53.0
> 

[PATCH 3/5] generic/091: enable sub-block reads

[Christoph Hellwig]

The description of generic/091 claims that it tries to exercise sub-block
direct I/O, but the test currently limits reads to PAGE_SIZE alignment.

Use the new min_dio_alignment -r option to query the minimal read
alignment and only limit the read alignment to that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 tests/generic/091 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tests/generic/091 b/tests/generic/091
index 5cdf04890c0e..b2fba09d39ef 100755
--- a/tests/generic/091
+++ b/tests/generic/091
@@ -15,8 +15,8 @@ _begin_fstest rw auto quick
 _require_test
 _require_odirect
 
-psize=`$here/src/feature -s`
 bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
+psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`
 
 # fsx usage:
 # 
-- 
2.53.0

Re: [PATCH 3/5] generic/091: enable sub-block reads

[Darrick J. Wong]

On Mon, Aug 31, 2026 at 09:51:06AM +0300, Christoph Hellwig wrote:
> The description of generic/091 claims that it tries to exercise sub-block
> direct I/O, but the test currently limits reads to PAGE_SIZE alignment.
> 
> Use the new min_dio_alignment -r option to query the minimal read
> alignment and only limit the read alignment to that.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

I've long wondered about why reads are the page size when xfs could
easily do smaller...
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>

--D

> ---
>  tests/generic/091 | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/tests/generic/091 b/tests/generic/091
> index 5cdf04890c0e..b2fba09d39ef 100755
> --- a/tests/generic/091
> +++ b/tests/generic/091
> @@ -15,8 +15,8 @@ _begin_fstest rw auto quick
>  _require_test
>  _require_odirect
>  
> -psize=`$here/src/feature -s`
>  bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
> +psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`
>  
>  # fsx usage:
>  # 
> -- 
> 2.53.0
> 
> 

Re: [PATCH 3/5] generic/091: enable sub-block reads

[Zorro Lang]

On Mon, Aug 31, 2026 at 10:19:31AM -0700, Darrick J. Wong wrote:
> On Mon, Aug 31, 2026 at 09:51:06AM +0300, Christoph Hellwig wrote:
> > The description of generic/091 claims that it tries to exercise sub-block
> > direct I/O, but the test currently limits reads to PAGE_SIZE alignment.
> > 
> > Use the new min_dio_alignment -r option to query the minimal read
> > alignment and only limit the read alignment to that.
> > 
> > Signed-off-by: Christoph Hellwig <hch@lst.de>
> 
> I've long wondered about why reads are the page size when xfs could
> easily do smaller...

Maybe we should rename psize/PSIZE in _run_fsx_on_file helper (and cases
call *run_fsx* function) as well? Keeping that name for DIO read alignment
doesn't quite match the new semantics introduced by this series.

Thanks,
Zorro

> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
> 
> --D
> 
> > ---
> >  tests/generic/091 | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/tests/generic/091 b/tests/generic/091
> > index 5cdf04890c0e..b2fba09d39ef 100755
> > --- a/tests/generic/091
> > +++ b/tests/generic/091
> > @@ -15,8 +15,8 @@ _begin_fstest rw auto quick
> >  _require_test
> >  _require_odirect
> >  
> > -psize=`$here/src/feature -s`
> >  bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
> > +psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`
> >  
> >  # fsx usage:
> >  # 
> > -- 
> > 2.53.0
> > 
> > 

Re: [PATCH 3/5] generic/091: enable sub-block reads

[Christoph Hellwig]

On Thu, Sep 03, 2026 at 12:46:54AM +0800, Zorro Lang wrote:
> On Mon, Aug 31, 2026 at 10:19:31AM -0700, Darrick J. Wong wrote:
> > On Mon, Aug 31, 2026 at 09:51:06AM +0300, Christoph Hellwig wrote:
> > > The description of generic/091 claims that it tries to exercise sub-block
> > > direct I/O, but the test currently limits reads to PAGE_SIZE alignment.
> > > 
> > > Use the new min_dio_alignment -r option to query the minimal read
> > > alignment and only limit the read alignment to that.
> > > 
> > > Signed-off-by: Christoph Hellwig <hch@lst.de>
> > 
> > I've long wondered about why reads are the page size when xfs could
> > easily do smaller...
> 
> Maybe we should rename psize/PSIZE in _run_fsx_on_file helper (and cases
> call *run_fsx* function) as well? Keeping that name for DIO read alignment
> doesn't quite match the new semantics introduced by this series.

Heh.  I found these substituations weird, but also don't really undestand
the purpose.  Why don't we just pass these as explicit arguments anyway?

Re: [PATCH 3/5] generic/091: enable sub-block reads

[Zorro Lang]

On Thu, Sep 03, 2026 at 07:34:51AM +0200, Christoph Hellwig wrote:
> On Thu, Sep 03, 2026 at 12:46:54AM +0800, Zorro Lang wrote:
> > On Mon, Aug 31, 2026 at 10:19:31AM -0700, Darrick J. Wong wrote:
> > > On Mon, Aug 31, 2026 at 09:51:06AM +0300, Christoph Hellwig wrote:
> > > > The description of generic/091 claims that it tries to exercise sub-block
> > > > direct I/O, but the test currently limits reads to PAGE_SIZE alignment.
> > > > 
> > > > Use the new min_dio_alignment -r option to query the minimal read
> > > > alignment and only limit the read alignment to that.
> > > > 
> > > > Signed-off-by: Christoph Hellwig <hch@lst.de>
> > > 
> > > I've long wondered about why reads are the page size when xfs could
> > > easily do smaller...
> > 
> > Maybe we should rename psize/PSIZE in _run_fsx_on_file helper (and cases
> > call *run_fsx* function) as well? Keeping that name for DIO read alignment
> > doesn't quite match the new semantics introduced by this series.
> 
> Heh.  I found these substituations weird, but also don't really undestand
> the purpose.  Why don't we just pass these as explicit arguments anyway?

This change traces back to commit 3597757462a7 ("fsx: Small improvements
and fixes") from a decade ago. It moved run_fsx directly from a local
test-case function into a common helper without any modifications.

This issue doesn't block your patch series. I'll send a follow-up series to
clean up run_fsx once this is merged, so let's keep the focus on your changes
for now :)


> 
> 

Re: [PATCH 3/5] generic/091: enable sub-block reads

[Zorro Lang]

On Mon, Aug 31, 2026 at 09:51:06AM +0300, Christoph Hellwig wrote:
> The description of generic/091 claims that it tries to exercise sub-block
> direct I/O, but the test currently limits reads to PAGE_SIZE alignment.
> 
> Use the new min_dio_alignment -r option to query the minimal read
> alignment and only limit the read alignment to that.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  tests/generic/091 | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/tests/generic/091 b/tests/generic/091
> index 5cdf04890c0e..b2fba09d39ef 100755
> --- a/tests/generic/091
> +++ b/tests/generic/091
> @@ -15,8 +15,8 @@ _begin_fstest rw auto quick
>  _require_test
>  _require_odirect
>  
> -psize=`$here/src/feature -s`
>  bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
> +psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`

Good to me,

Reviewed-by: Zorro Lang <zlang@kernel.org>

>  
>  # fsx usage:
>  # 
> -- 
> 2.53.0
> 

[PATCH 4/5] generic/263: enable sub-block reads

[Christoph Hellwig]

The description of generic/263 claims that it tries to exercise sub-block
direct I/O, but the test currently limits reads to PAGE_SIZE alignment.

Use the new min_dio_alignment -r option to query the minimal read
alignment and only limit the read alignment to that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 tests/generic/263 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tests/generic/263 b/tests/generic/263
index 91cfbe5253bd..c456d62ebd43 100755
--- a/tests/generic/263
+++ b/tests/generic/263
@@ -15,7 +15,7 @@ _begin_fstest rw auto quick
 _require_test
 _require_odirect
 
-psize=`$here/src/feature -s`
+psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`
 bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
 
 run_fsx -N 10000  -o 8192   -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
-- 
2.53.0

Re: [PATCH 4/5] generic/263: enable sub-block reads

[Darrick J. Wong]

On Mon, Aug 31, 2026 at 09:51:07AM +0300, Christoph Hellwig wrote:
> The description of generic/263 claims that it tries to exercise sub-block
> direct I/O, but the test currently limits reads to PAGE_SIZE alignment.
> 
> Use the new min_dio_alignment -r option to query the minimal read
> alignment and only limit the read alignment to that.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Looks ok,
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>

--D

> ---
>  tests/generic/263 | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/tests/generic/263 b/tests/generic/263
> index 91cfbe5253bd..c456d62ebd43 100755
> --- a/tests/generic/263
> +++ b/tests/generic/263
> @@ -15,7 +15,7 @@ _begin_fstest rw auto quick
>  _require_test
>  _require_odirect
>  
> -psize=`$here/src/feature -s`
> +psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`
>  bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
>  
>  run_fsx -N 10000  -o 8192   -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
> -- 
> 2.53.0
> 
> 

Re: [PATCH 4/5] generic/263: enable sub-block reads

[Zorro Lang]

On Mon, Aug 31, 2026 at 09:51:07AM +0300, Christoph Hellwig wrote:
> The description of generic/263 claims that it tries to exercise sub-block
> direct I/O, but the test currently limits reads to PAGE_SIZE alignment.
> 
> Use the new min_dio_alignment -r option to query the minimal read
> alignment and only limit the read alignment to that.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  tests/generic/263 | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/tests/generic/263 b/tests/generic/263
> index 91cfbe5253bd..c456d62ebd43 100755
> --- a/tests/generic/263
> +++ b/tests/generic/263
> @@ -15,7 +15,7 @@ _begin_fstest rw auto quick
>  _require_test
>  _require_odirect
>  
> -psize=`$here/src/feature -s`
> +psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`

Makes sense to me (except the "psize" name, I think we should update that later).

Reviewed-by: Zorro Lang <zlang@kernel.org>

>  bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
>  
>  run_fsx -N 10000  -o 8192   -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
> -- 
> 2.53.0
> 

[PATCH 5/5] generic/760: enable sub-block reads

[Christoph Hellwig]

generic/760 currently limits reads to PAGE_SIZE alignments while allowing
smaller writes. Use the new min_dio_alignment -r option to query the minimal
read alignment and only limit the read alignment to that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 tests/generic/760 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tests/generic/760 b/tests/generic/760
index f270636e56a3..facd83e4af0c 100755
--- a/tests/generic/760
+++ b/tests/generic/760
@@ -16,7 +16,7 @@ _require_odirect
 _require_thp
 _require_hugepage_fsx
 
-psize=`$here/src/feature -s`
+psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`
 bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
 
 _run_hugepage_fsx -N 10000            -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
-- 
2.53.0

Re: [PATCH 5/5] generic/760: enable sub-block reads

[Darrick J. Wong]

On Mon, Aug 31, 2026 at 09:51:08AM +0300, Christoph Hellwig wrote:
> generic/760 currently limits reads to PAGE_SIZE alignments while allowing
> smaller writes. Use the new min_dio_alignment -r option to query the minimal
> read alignment and only limit the read alignment to that.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Looks ok,
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>

--D

> ---
>  tests/generic/760 | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/tests/generic/760 b/tests/generic/760
> index f270636e56a3..facd83e4af0c 100755
> --- a/tests/generic/760
> +++ b/tests/generic/760
> @@ -16,7 +16,7 @@ _require_odirect
>  _require_thp
>  _require_hugepage_fsx
>  
> -psize=`$here/src/feature -s`
> +psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`
>  bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
>  
>  _run_hugepage_fsx -N 10000            -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
> -- 
> 2.53.0
> 
> 

Re: [PATCH 5/5] generic/760: enable sub-block reads

[Zorro Lang]

On Mon, Aug 31, 2026 at 09:51:08AM +0300, Christoph Hellwig wrote:
> generic/760 currently limits reads to PAGE_SIZE alignments while allowing
> smaller writes. Use the new min_dio_alignment -r option to query the minimal
> read alignment and only limit the read alignment to that.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  tests/generic/760 | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/tests/generic/760 b/tests/generic/760
> index f270636e56a3..facd83e4af0c 100755
> --- a/tests/generic/760
> +++ b/tests/generic/760
> @@ -16,7 +16,7 @@ _require_odirect
>  _require_thp
>  _require_hugepage_fsx
>  
> -psize=`$here/src/feature -s`
> +psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`

Reviewed-by: Zorro Lang <zlang@kernel.org>

>  bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
>  
>  _run_hugepage_fsx -N 10000            -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
> -- 
> 2.53.0
> 

actually exercise sub-block direct I/O reads v2

[Christoph Hellwig]

Hi all,

when looking into testing changes that might require a minimum read size
larger than a page size, I realized that various tests hard code
PAGE_SIZE as a direct I/O read size despite claiming that they exercise
sub-block direct I/O.

This series adds support to query the minimum read size and actually uses
that for testing.

Changes since v1:
 - explicitly request STATX_DIO_READ_ALIGN
 - spelling fixes

[PATCH 5/5] generic/760: enable sub-block reads

[Christoph Hellwig]

generic/760 currently limits reads to PAGE_SIZE alignments while allowing
smaller writes. Use the new min_dio_alignment -r option to query the minimal
read alignment and only limit the read alignment to that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Zorro Lang <zlang@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
---
 tests/generic/760 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tests/generic/760 b/tests/generic/760
index f270636e56a3..facd83e4af0c 100755
--- a/tests/generic/760
+++ b/tests/generic/760
@@ -16,7 +16,7 @@ _require_odirect
 _require_thp
 _require_hugepage_fsx
 
-psize=`$here/src/feature -s`
+psize=`$here/src/min_dio_alignment -r $TEST_DIR $TEST_DEV`
 bsize=`$here/src/min_dio_alignment $TEST_DIR $TEST_DEV`
 
 _run_hugepage_fsx -N 10000            -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
-- 
2.53.0