Re: [PATCH 5/5] hwmon: (nct6683) Enable pwm control on ASRock B850 Steel Legend WiFi

[Fabio Baltieri <fabio.baltieri@gmail.com>]

Hi,

On Tue, Aug 25, 2026 at 11:25:46AM +0200, Johan Dahlin wrote:
> Fan control has been measured on this board: with a fan in manual mode the
> applied pwm value tracks what is written, and the fan responds
> proportionally from 337 RPM at pwm 60 to 933 RPM at pwm 255.
> 
> Allow pwm writes on this board.
> 
> Signed-off-by: Johan Dahlin <jdahlin@gmail.com>
> ---
>  drivers/hwmon/nct6683.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/nct6683.c b/drivers/hwmon/nct6683.c
> index 6825e6c3af34..df28055b1a1c 100644
> --- a/drivers/hwmon/nct6683.c
> +++ b/drivers/hwmon/nct6683.c
> @@ -972,7 +972,8 @@ SENSOR_TEMPLATE(pwm, "pwm%d", S_IRUGO, show_pwm, store_pwm, 0);
>   */
>  static bool nct6683_has_fan_control(struct nct6683_data *data)
>  {
> -	return data->customer_id == NCT6683_CUSTOMER_ID_MITAC;
> +	return data->customer_id == NCT6683_CUSTOMER_ID_MITAC ||
> +	       data->customer_id == NCT6683_CUSTOMER_ID_ASROCK8;
>  }
>  
>  /*

Thanks for the patches, I tried this on an ASRock BC-250, also NCT6686D,
and it works fine there as well. The board id is
NCT6683_CUSTOMER_ID_AMD and all it needed was:

-              data->customer_id == NCT6683_CUSTOMER_ID_ASROCK8;
+              data->customer_id == NCT6683_CUSTOMER_ID_ASROCK8 ||
+              data->customer_id == NCT6683_CUSTOMER_ID_AMD;

Maybe you can add that as well once you send the v2 of this? (and a
Tested-by: Fabio Baltieri <fabio.baltieri@gmail.com>). Or I'm happy to
send a followup myself once this gets merged, whatever you prefer.

Either way I feel like this list is going to grow, maybe a

switch (data->customer_id) {
...

would work out better long term here.

Thanks,
Fabio