From: Conor Dooley <conor@kernel.org>
To: Lucas Tanure <tanure@linux.com>
Cc: xianwei.zhao@amlogic.com, Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [RFC PATCH 2/6] dt-bindings: net: amlogic,meson-dwmac: add amlogic,t7-dwmac
Date: Mon, 5 Oct 2026 11:46:19 +0100 [thread overview]
Message-ID: <asN_-5zalENhkdVA@squawk> (raw)
In-Reply-To: <20261004144046.391444-3-tanure@linux.com>
[-- Attachment #1: Type: text/plain, Size: 4449 bytes --]
On Sun, Oct 04, 2026 at 03:40:42PM +0100, Lucas Tanure wrote:
> The T7 has the same ethernet glue as the G12A, but the controller
> reaches DRAM through a pipeline stage that the hardware design inserts
> in the bus path. That stage has a gate of its own, which no other member
> of the family has. Nothing else in Linux claims the gate, so it is
> switched off as unused and the port can then no longer complete a
> transfer.
>
> Describing it means a fourth clock, and the fourth clock of the existing
> list is the one driving the timing adjustment logic. The T7 applies the
> RGMII RX delay through PRG_ETH1 and never enables that logic, so it has
> no use for that clock. Give the T7 a list of its own with the pipeline
> gate as the fourth entry, under the same name the SD/eMMC controllers of
> this SoC already use for the equivalent stage on their own bus path. All
> four entries are required, since the port cannot move data without any
> of them.
>
> The RX delay range is the one the G12A has, since it is the same
> register field.
>
> The compatible pairs the T7 name with the 5.10a Synopsys core the MAC
> reports, and with the generic fallback.
>
> Assisted-by: LLM
> Signed-off-by: Lucas Tanure <tanure@linux.com>
> ---
> .../bindings/net/amlogic,meson-dwmac.yaml | 47 +++++++++++++++++++
> 1 file changed, 47 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> index 90ef79161ab1..96118b4d1560 100644
> --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> @@ -23,6 +23,7 @@ select:
> - amlogic,meson-gxbb-dwmac
> - amlogic,meson-axg-dwmac
> - amlogic,meson-g12a-dwmac
> + - amlogic,t7-dwmac
> required:
> - compatible
>
> @@ -57,6 +58,47 @@ allOf:
> - const: clkin1
> - const: timing-adjustment
>
> + # The T7 applies the RGMII RX delay through PRG_ETH1 and never enables the
> + # timing adjustment logic, so it has no timing-adjustment clock. What it does
> + # need is the gate of the pipeline stage the controller reaches DRAM through.
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: amlogic,t7-dwmac
> + then:
> + properties:
> + clocks:
> + items:
> + - description: GMAC main clock
> + - description: First parent clock of the internal mux
> + - description: Second parent clock of the internal mux
> + - description:
> + clock of the pipeline stage inserted in the bus path between
> + the controller and the DRAM. Without it, the controller cannot
> + complete DMA transfers.
Have you checked that this actually works as a limiter to only 4 clocks?
There's an additionalItems: true in the snps,dwmac.yaml that I don't
know if will permit random additional items here.
Cheers,
Conor.
> +
> + clock-names:
> + items:
> + - const: stmmaceth
> + - const: clkin0
> + - const: clkin1
> + - const: pipeline
> +
> + # Delay definitions for Meson8b and newer (including T7)
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amlogic,meson8b-dwmac
> + - amlogic,meson8m2-dwmac
> + - amlogic,meson-gxbb-dwmac
> + - amlogic,meson-axg-dwmac
> + - amlogic,meson-g12a-dwmac
> + - amlogic,t7-dwmac
> + then:
> + properties:
> amlogic,tx-delay-ns:
> enum: [0, 2, 4, 6]
> default: 2
> @@ -106,6 +148,7 @@ allOf:
> contains:
> enum:
> - amlogic,meson-g12a-dwmac
> + - amlogic,t7-dwmac
> then:
> properties:
> rx-internal-delay-ps:
> @@ -143,6 +186,10 @@ properties:
> - amlogic,meson6-dwmac
> - amlogic,meson8m2-dwmac
> - const: snps,dwmac
> + - items:
> + - const: amlogic,t7-dwmac
> + - const: snps,dwmac-5.10a
> + - const: snps,dwmac
>
> reg:
> items:
> --
> 2.56.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Conor Dooley <conor@kernel.org>
To: Lucas Tanure <tanure@linux.com>
Cc: xianwei.zhao@amlogic.com, Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [RFC PATCH 2/6] dt-bindings: net: amlogic,meson-dwmac: add amlogic,t7-dwmac
Date: Mon, 5 Oct 2026 11:46:19 +0100 [thread overview]
Message-ID: <asN_-5zalENhkdVA@squawk> (raw)
In-Reply-To: <20261004144046.391444-3-tanure@linux.com>
[-- Attachment #1.1: Type: text/plain, Size: 4449 bytes --]
On Sun, Oct 04, 2026 at 03:40:42PM +0100, Lucas Tanure wrote:
> The T7 has the same ethernet glue as the G12A, but the controller
> reaches DRAM through a pipeline stage that the hardware design inserts
> in the bus path. That stage has a gate of its own, which no other member
> of the family has. Nothing else in Linux claims the gate, so it is
> switched off as unused and the port can then no longer complete a
> transfer.
>
> Describing it means a fourth clock, and the fourth clock of the existing
> list is the one driving the timing adjustment logic. The T7 applies the
> RGMII RX delay through PRG_ETH1 and never enables that logic, so it has
> no use for that clock. Give the T7 a list of its own with the pipeline
> gate as the fourth entry, under the same name the SD/eMMC controllers of
> this SoC already use for the equivalent stage on their own bus path. All
> four entries are required, since the port cannot move data without any
> of them.
>
> The RX delay range is the one the G12A has, since it is the same
> register field.
>
> The compatible pairs the T7 name with the 5.10a Synopsys core the MAC
> reports, and with the generic fallback.
>
> Assisted-by: LLM
> Signed-off-by: Lucas Tanure <tanure@linux.com>
> ---
> .../bindings/net/amlogic,meson-dwmac.yaml | 47 +++++++++++++++++++
> 1 file changed, 47 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> index 90ef79161ab1..96118b4d1560 100644
> --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> @@ -23,6 +23,7 @@ select:
> - amlogic,meson-gxbb-dwmac
> - amlogic,meson-axg-dwmac
> - amlogic,meson-g12a-dwmac
> + - amlogic,t7-dwmac
> required:
> - compatible
>
> @@ -57,6 +58,47 @@ allOf:
> - const: clkin1
> - const: timing-adjustment
>
> + # The T7 applies the RGMII RX delay through PRG_ETH1 and never enables the
> + # timing adjustment logic, so it has no timing-adjustment clock. What it does
> + # need is the gate of the pipeline stage the controller reaches DRAM through.
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: amlogic,t7-dwmac
> + then:
> + properties:
> + clocks:
> + items:
> + - description: GMAC main clock
> + - description: First parent clock of the internal mux
> + - description: Second parent clock of the internal mux
> + - description:
> + clock of the pipeline stage inserted in the bus path between
> + the controller and the DRAM. Without it, the controller cannot
> + complete DMA transfers.
Have you checked that this actually works as a limiter to only 4 clocks?
There's an additionalItems: true in the snps,dwmac.yaml that I don't
know if will permit random additional items here.
Cheers,
Conor.
> +
> + clock-names:
> + items:
> + - const: stmmaceth
> + - const: clkin0
> + - const: clkin1
> + - const: pipeline
> +
> + # Delay definitions for Meson8b and newer (including T7)
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amlogic,meson8b-dwmac
> + - amlogic,meson8m2-dwmac
> + - amlogic,meson-gxbb-dwmac
> + - amlogic,meson-axg-dwmac
> + - amlogic,meson-g12a-dwmac
> + - amlogic,t7-dwmac
> + then:
> + properties:
> amlogic,tx-delay-ns:
> enum: [0, 2, 4, 6]
> default: 2
> @@ -106,6 +148,7 @@ allOf:
> contains:
> enum:
> - amlogic,meson-g12a-dwmac
> + - amlogic,t7-dwmac
> then:
> properties:
> rx-internal-delay-ps:
> @@ -143,6 +186,10 @@ properties:
> - amlogic,meson6-dwmac
> - amlogic,meson8m2-dwmac
> - const: snps,dwmac
> + - items:
> + - const: amlogic,t7-dwmac
> + - const: snps,dwmac-5.10a
> + - const: snps,dwmac
>
> reg:
> items:
> --
> 2.56.0
>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 167 bytes --]
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2026-10-05 10:46 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-04 14:40 [RFC PATCH 0/6] Add ethernet support for the Amlogic T7 Lucas Tanure
2026-10-04 14:40 ` Lucas Tanure
2026-10-04 14:40 ` [RFC PATCH 1/6] dt-bindings: net: amlogic,meson-dwmac: spell out the compatible combinations Lucas Tanure
2026-10-04 14:40 ` Lucas Tanure
2026-10-05 10:39 ` Conor Dooley
2026-10-05 10:39 ` Conor Dooley
2026-10-04 14:40 ` [RFC PATCH 2/6] dt-bindings: net: amlogic,meson-dwmac: add amlogic,t7-dwmac Lucas Tanure
2026-10-04 14:40 ` Lucas Tanure
2026-10-05 10:46 ` Conor Dooley [this message]
2026-10-05 10:46 ` Conor Dooley
2026-10-06 9:24 ` Lucas Tanure
2026-10-06 9:24 ` Lucas Tanure
2026-10-04 14:40 ` [RFC PATCH 3/6] net: stmmac: dwmac-meson8b: add support for the Amlogic T7 Lucas Tanure
2026-10-04 14:40 ` Lucas Tanure
2026-10-04 15:28 ` Neil Armstrong
2026-10-04 15:28 ` Neil Armstrong
2026-10-04 21:13 ` Maxime Chevallier
2026-10-04 21:13 ` Maxime Chevallier
2026-10-04 14:40 ` [RFC PATCH 4/6] arm64: dts: amlogic: t7: add the ethernet pinctrl nodes Lucas Tanure
2026-10-04 14:40 ` Lucas Tanure
2026-10-04 15:28 ` Neil Armstrong
2026-10-04 15:28 ` Neil Armstrong
2026-10-04 14:40 ` [RFC PATCH 5/6] arm64: dts: amlogic: t7: add the ethernet controller Lucas Tanure
2026-10-04 14:40 ` Lucas Tanure
2026-10-04 15:29 ` Neil Armstrong
2026-10-04 15:29 ` Neil Armstrong
2026-10-04 14:40 ` [RFC PATCH 6/6] arm64: dts: amlogic: t7: khadas-vim4: enable the ethernet port Lucas Tanure
2026-10-04 14:40 ` Lucas Tanure
2026-10-04 15:29 ` Neil Armstrong
2026-10-04 15:29 ` Neil Armstrong
2026-10-04 20:58 ` Maxime Chevallier
2026-10-04 20:58 ` Maxime Chevallier
2026-10-05 10:04 ` Lucas Tanure
2026-10-05 10:04 ` Lucas Tanure
2026-10-05 15:56 ` Andrew Lunn
2026-10-05 15:56 ` Andrew Lunn
2026-10-06 9:05 ` Lucas Tanure
2026-10-06 9:05 ` Lucas Tanure
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=asN_-5zalENhkdVA@squawk \
--to=conor@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=maxime.chevallier@bootlin.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=neil.armstrong@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=tanure@linux.com \
--cc=xianwei.zhao@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.