From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: Oleh Kravchenko <oleg@kaa.org.ua>,
devicetree@vger.kernel.org, linux-leds@vger.kernel.org
Subject: Re: [PATCH v4 2/2] leds: add LED driver for EL15203000 board
Date: Tue, 13 Aug 2019 22:28:41 +0200 [thread overview]
Message-ID: <c2b006bb-2bb6-98b0-c907-190fd9fc41c7@gmail.com> (raw)
In-Reply-To: <20190808203204.8614-2-oleg@kaa.org.ua>
Hi Oleh,
Thank you for the patch set.
On 8/8/19 10:32 PM, Oleh Kravchenko wrote:
> This patch adds a LED class driver for the RGB LEDs found on
> the Crane Merchandising System EL15203000 LEDs board
> (aka RED LEDs board).
>
> Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
> ---
> .../testing/sysfs-class-led-driver-el15203000 | 22 +
> drivers/leds/Kconfig | 13 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-el15203000.c | 478 ++++++++++++++++++
> 4 files changed, 514 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-class-led-driver-el15203000
> create mode 100644 drivers/leds/leds-el15203000.c
>
> diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
> new file mode 100644
> index 000000000000..91a483e493d9
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
> @@ -0,0 +1,22 @@
> +What: /sys/class/leds/<led>/hw_pattern
> +Date: August 2019
> +KernelVersion: 5.3
> +Description:
> + Specify a hardware pattern for the EL15203000 LED.
> + The LEDs board supports only predefined patterns by firmware
> + for specific LEDs.
> +
> + Breathing mode for Screen frame light tube:
> + "0 4000 1 4000"
> +
> + Cascade mode for Pipe LED:
> + "1 800 2 800 4 800 8 800 16 800 1 800 2 800 4 800 8 800 16 800"
Why the sequence "1 800 2 800 4 800 8 800 16 800" is duplicated here?
It seems redundant. But aside of that - aren't the timings modifiable?
In other words - are these all patterns somehow configurable or they are
pre-programmed?
> +
> + Inverted cascade mode for Pipe LED:
> + "30 800 29 800 27 800 23 800 15 800 30 800 29 800 27 800 23 800 15 800"
Similar duplication here.
> +
> + Bounce mode for Pipe LED:
> + "1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1 800"
Instead of two repeating "16 800" you could provide "16 1600".
But here again is the question whether these values are configurable.
From what I can see in your driver implementation you're expecting
exactly the values provided in these examples to enable given hardware
pattern (led_pattern_cmp()).
> +
> + Inverted bounce mode for Pipe LED:
> + "30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29 800 30 800"
--
Best regards,
Jacek Anaszewski
WARNING: multiple messages have this Message-ID (diff)
From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: Oleh Kravchenko <oleg@kaa.org.ua>,
devicetree@vger.kernel.org, linux-leds@vger.kernel.org
Subject: Re: [PATCH v4 2/2] leds: add LED driver for EL15203000 board
Date: Tue, 13 Aug 2019 22:28:41 +0200 [thread overview]
Message-ID: <c2b006bb-2bb6-98b0-c907-190fd9fc41c7@gmail.com> (raw)
In-Reply-To: <20190808203204.8614-2-oleg@kaa.org.ua>
Hi Oleh,
Thank you for the patch set.
On 8/8/19 10:32 PM, Oleh Kravchenko wrote:
> This patch adds a LED class driver for the RGB LEDs found on
> the Crane Merchandising System EL15203000 LEDs board
> (aka RED LEDs board).
>
> Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
> ---
> .../testing/sysfs-class-led-driver-el15203000 | 22 +
> drivers/leds/Kconfig | 13 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-el15203000.c | 478 ++++++++++++++++++
> 4 files changed, 514 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-class-led-driver-el15203000
> create mode 100644 drivers/leds/leds-el15203000.c
>
> diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
> new file mode 100644
> index 000000000000..91a483e493d9
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
> @@ -0,0 +1,22 @@
> +What: /sys/class/leds/<led>/hw_pattern
> +Date: August 2019
> +KernelVersion: 5.3
> +Description:
> + Specify a hardware pattern for the EL15203000 LED.
> + The LEDs board supports only predefined patterns by firmware
> + for specific LEDs.
> +
> + Breathing mode for Screen frame light tube:
> + "0 4000 1 4000"
> +
> + Cascade mode for Pipe LED:
> + "1 800 2 800 4 800 8 800 16 800 1 800 2 800 4 800 8 800 16 800"
Why the sequence "1 800 2 800 4 800 8 800 16 800" is duplicated here?
It seems redundant. But aside of that - aren't the timings modifiable?
In other words - are these all patterns somehow configurable or they are
pre-programmed?
> +
> + Inverted cascade mode for Pipe LED:
> + "30 800 29 800 27 800 23 800 15 800 30 800 29 800 27 800 23 800 15 800"
Similar duplication here.
> +
> + Bounce mode for Pipe LED:
> + "1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1 800"
Instead of two repeating "16 800" you could provide "16 1600".
But here again is the question whether these values are configurable.
>From what I can see in your driver implementation you're expecting
exactly the values provided in these examples to enable given hardware
pattern (led_pattern_cmp()).
> +
> + Inverted bounce mode for Pipe LED:
> + "30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29 800 30 800"
--
Best regards,
Jacek Anaszewski
next prev parent reply other threads:[~2019-08-13 20:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-08 20:32 [PATCH v4 1/2] dt-bindings: Add docs for EL15203000 Oleh Kravchenko
2019-08-08 20:32 ` [PATCH v4 2/2] leds: add LED driver for EL15203000 board Oleh Kravchenko
2019-08-13 20:28 ` Jacek Anaszewski [this message]
2019-08-13 20:28 ` Jacek Anaszewski
2019-08-13 20:37 ` Oleh Kravchenko
2019-08-14 18:18 ` Jacek Anaszewski
2019-08-14 19:46 ` Oleh Kravchenko
2019-08-14 19:57 ` Jacek Anaszewski
2019-08-14 20:16 ` Oleh Kravchenko
2019-08-14 20:53 ` Jacek Anaszewski
2019-08-14 20:58 ` Oleh Kravchenko
2019-08-17 15:02 ` Pavel Machek
2019-08-20 7:46 ` Oleh Kravchenko
2019-08-18 13:47 ` Jacek Anaszewski
2019-08-27 20:43 ` Oleh Kravchenko
2019-08-27 20:56 ` Jacek Anaszewski
2019-08-27 21:11 ` Oleh Kravchenko
2019-08-27 21:18 ` Jacek Anaszewski
2019-08-27 21:26 ` Oleh Kravchenko
2019-08-13 20:31 ` [PATCH v4 1/2] dt-bindings: Add docs for EL15203000 Dan Murphy
2019-08-13 20:31 ` Dan Murphy
2019-08-14 19:54 ` Jacek Anaszewski
2019-08-18 13:41 ` Jacek Anaszewski
2019-08-20 7:50 ` Oleh Kravchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c2b006bb-2bb6-98b0-c907-190fd9fc41c7@gmail.com \
--to=jacek.anaszewski@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=oleg@kaa.org.ua \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.