From: mika.westerberg@iki.fi (Mika Westerberg)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/5] ep93xx DMA patches
Date: Sun, 29 May 2011 13:10:01 +0300 [thread overview]
Message-ID: <cover.1306662317.git.mika.westerberg@iki.fi> (raw)
This is an updated version of the ep93xx DMA patches. Previous version can be
found here: https://lkml.org/lkml/2011/5/22/86.
Changes to v1:
* removed unnecessary header
* corrected SPI driver documentation
* DMA driver platform code is only compiled when CONFIG_EP93XX_DMA is
enabled
I tried to put all the acks in place, hope I got them right.
There is a dependency between patch 1 and patch 4 which I'm not entirely sure
how to solve. Basically it is required that we have patch 1 applied before
patch 4 or merge conflict results.
Otherwise it shouldn't matter in which order the patches arrive to the
mainline.
Unless someone has a better idea, I suggest that these patches will go through
their respective subsystem trees. All the maintainers should be copied.
Thanks,
MW
Mika Westerberg (5):
dmaengine: add ep93xx DMA support
ep93xx: add dmaengine platform code
ASoC: ep93xx: convert to use the DMA engine API
ep93xx: remove the old M2P DMA code
spi/ep93xx: add DMA support
Documentation/spi/ep93xx_spi | 10 +
arch/arm/mach-ep93xx/Makefile | 4 +-
arch/arm/mach-ep93xx/core.c | 6 +-
arch/arm/mach-ep93xx/dma-m2p.c | 411 -------
arch/arm/mach-ep93xx/dma.c | 108 ++
arch/arm/mach-ep93xx/include/mach/dma.h | 190 ++---
arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h | 2 +
drivers/dma/Kconfig | 7 +
drivers/dma/Makefile | 1 +
drivers/dma/ep93xx_dma.c | 1355 ++++++++++++++++++++++++
drivers/spi/ep93xx_spi.c | 303 +++++-
sound/soc/ep93xx/ep93xx-ac97.c | 4 +-
sound/soc/ep93xx/ep93xx-i2s.c | 4 +-
sound/soc/ep93xx/ep93xx-pcm.c | 137 ++--
14 files changed, 1930 insertions(+), 612 deletions(-)
delete mode 100644 arch/arm/mach-ep93xx/dma-m2p.c
create mode 100644 arch/arm/mach-ep93xx/dma.c
create mode 100644 drivers/dma/ep93xx_dma.c
--
1.7.4.4
WARNING: multiple messages have this Message-ID (diff)
From: Mika Westerberg <mika.westerberg@iki.fi>
To: linux-arm-kernel@lists.infradead.org
Cc: hsweeten@visionengravers.com, rmallon@gmail.com,
vinod.koul@intel.com, dan.j.williams@intel.com, lrg@ti.com,
broonie@opensource.wolfsonmicro.com, grant.likely@secretlab.ca,
Mika Westerberg <mika.westerberg@iki.fi>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/5] ep93xx DMA patches
Date: Sun, 29 May 2011 13:10:01 +0300 [thread overview]
Message-ID: <cover.1306662317.git.mika.westerberg@iki.fi> (raw)
This is an updated version of the ep93xx DMA patches. Previous version can be
found here: https://lkml.org/lkml/2011/5/22/86.
Changes to v1:
* removed unnecessary header
* corrected SPI driver documentation
* DMA driver platform code is only compiled when CONFIG_EP93XX_DMA is
enabled
I tried to put all the acks in place, hope I got them right.
There is a dependency between patch 1 and patch 4 which I'm not entirely sure
how to solve. Basically it is required that we have patch 1 applied before
patch 4 or merge conflict results.
Otherwise it shouldn't matter in which order the patches arrive to the
mainline.
Unless someone has a better idea, I suggest that these patches will go through
their respective subsystem trees. All the maintainers should be copied.
Thanks,
MW
Mika Westerberg (5):
dmaengine: add ep93xx DMA support
ep93xx: add dmaengine platform code
ASoC: ep93xx: convert to use the DMA engine API
ep93xx: remove the old M2P DMA code
spi/ep93xx: add DMA support
Documentation/spi/ep93xx_spi | 10 +
arch/arm/mach-ep93xx/Makefile | 4 +-
arch/arm/mach-ep93xx/core.c | 6 +-
arch/arm/mach-ep93xx/dma-m2p.c | 411 -------
arch/arm/mach-ep93xx/dma.c | 108 ++
arch/arm/mach-ep93xx/include/mach/dma.h | 190 ++---
arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h | 2 +
drivers/dma/Kconfig | 7 +
drivers/dma/Makefile | 1 +
drivers/dma/ep93xx_dma.c | 1355 ++++++++++++++++++++++++
drivers/spi/ep93xx_spi.c | 303 +++++-
sound/soc/ep93xx/ep93xx-ac97.c | 4 +-
sound/soc/ep93xx/ep93xx-i2s.c | 4 +-
sound/soc/ep93xx/ep93xx-pcm.c | 137 ++--
14 files changed, 1930 insertions(+), 612 deletions(-)
delete mode 100644 arch/arm/mach-ep93xx/dma-m2p.c
create mode 100644 arch/arm/mach-ep93xx/dma.c
create mode 100644 drivers/dma/ep93xx_dma.c
--
1.7.4.4
next reply other threads:[~2011-05-29 10:10 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-29 10:10 Mika Westerberg [this message]
2011-05-29 10:10 ` [PATCH v2 0/5] ep93xx DMA patches Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 1/5] dmaengine: add ep93xx DMA support Mika Westerberg
2011-05-29 10:10 ` Mika Westerberg
2011-11-15 15:02 ` Rafal Prylowski
2011-11-15 15:02 ` Rafal Prylowski
2011-11-15 17:59 ` H Hartley Sweeten
2011-11-15 17:59 ` H Hartley Sweeten
2011-11-16 6:48 ` Mika Westerberg
2011-11-16 6:48 ` Mika Westerberg
2011-11-16 9:00 ` Rafal Prylowski
2011-11-16 9:00 ` Rafal Prylowski
2011-11-16 6:55 ` Mika Westerberg
2011-11-16 6:55 ` Mika Westerberg
2011-11-16 8:31 ` Rafal Prylowski
2011-11-16 8:31 ` Rafal Prylowski
2011-11-19 12:38 ` Mika Westerberg
2011-11-19 12:38 ` Mika Westerberg
2011-11-21 7:44 ` Rafal Prylowski
2011-11-21 7:44 ` Rafal Prylowski
2011-11-21 8:01 ` Mika Westerberg
2011-11-21 8:01 ` Mika Westerberg
2011-11-21 8:32 ` Vinod Koul
2011-11-21 8:32 ` Vinod Koul
2011-11-22 5:59 ` Mika Westerberg
2011-11-22 5:59 ` Mika Westerberg
2011-11-23 10:47 ` Vinod Koul
2011-11-23 10:47 ` Vinod Koul
2011-11-21 8:54 ` Rafal Prylowski
2011-11-21 8:54 ` Rafal Prylowski
2011-11-22 6:47 ` Mika Westerberg
2011-11-22 6:47 ` Mika Westerberg
2011-11-22 8:45 ` Rafal Prylowski
2011-11-22 8:45 ` Rafal Prylowski
2011-05-29 10:10 ` [PATCH v2 2/5] ep93xx: add dmaengine platform code Mika Westerberg
2011-05-29 10:10 ` Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 3/5] ASoC: ep93xx: convert to use the DMA engine API Mika Westerberg
2011-05-29 10:10 ` Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 4/5] ep93xx: remove the old M2P DMA code Mika Westerberg
2011-05-29 10:10 ` Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 5/5] spi/ep93xx: add DMA support Mika Westerberg
2011-05-29 10:10 ` Mika Westerberg
2011-06-03 20:44 ` Grant Likely
2011-06-03 20:44 ` Grant Likely
2011-06-07 17:14 ` Mika Westerberg
2011-06-07 17:14 ` Mika Westerberg
2011-06-07 18:45 ` Grant Likely
2011-06-07 18:45 ` Grant Likely
2011-06-07 19:06 ` Mika Westerberg
2011-06-07 19:06 ` Mika Westerberg
2011-06-07 19:18 ` Grant Likely
2011-06-07 19:18 ` Grant Likely
2011-06-07 19:29 ` Mika Westerberg
2011-06-07 19:29 ` Mika Westerberg
2011-06-07 19:40 ` Grant Likely
2011-06-07 19:40 ` Grant Likely
2011-06-08 3:58 ` Koul, Vinod
2011-06-08 3:58 ` Koul, Vinod
2011-06-08 21:53 ` Grant Likely
2011-06-08 21:53 ` Grant Likely
2011-06-09 16:42 ` Koul, Vinod
2011-06-09 16:42 ` Koul, Vinod
2011-06-09 18:46 ` Grant Likely
2011-06-09 18:46 ` Grant Likely
2011-06-09 19:15 ` Mika Westerberg
2011-06-09 19:15 ` Mika Westerberg
2011-06-05 8:19 ` [PATCH v2 0/5] ep93xx DMA patches Mika Westerberg
2011-06-05 8:19 ` Mika Westerberg
2011-06-06 6:39 ` Koul, Vinod
2011-06-06 6:39 ` Koul, Vinod
2011-06-06 16:42 ` Mika Westerberg
2011-06-06 16:42 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1306662317.git.mika.westerberg@iki.fi \
--to=mika.westerberg@iki.fi \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.