From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/13] at91: 3.4-rc1 fixes
Date: Tue, 3 Apr 2012 09:32:44 +0200 [thread overview]
Message-ID: <cover.1333437885.git.nicolas.ferre@atmel.com> (raw)
Here is a bunch of fixes for AT91 that will go on top of 3.4-rc1.
Some modifications are related to certain drivers (USB ohci-at91 for instance)
but are touching the core AT91 devices/board files and Device Tree files.
The modification of "vbus_pin_active_low" in particular cannot be separated
from the modification of .dts[i] and devices/board files.
I will have to collect "Acked-by" from USB people on the ohci-at91
modifications (Greg?). I will try to find them just after having posted
this v2 today...
Ludovic Desroches (1):
ARM: at91: dt: remove unit-address part for memory nodes
Nicolas Ferre (12):
ARM: at91/at91sam9x5: add clkdev entries for DMA controllers
USB: ohci-at91: fix vbus_pin_active_low handling
ARM: at91/USB host: specify and handle properly vbus_pin_active_low
ARM: at91/dts: USB host vbus is active low
USB: ohci-at91: rework and fix initialization
USB: ohci-at91: change maximum number of ports
USB: ohci-at91: coding style modifications with one-line ifs
USB: ohci-at91: trivial return code name change
ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file
ARM: at91/NAND DT bindings: add comments
USB: ehci-atmel: add needed of.h header file
ARM: at91: fix check of valid GPIO for SPI and USB
.../devicetree/bindings/mtd/atmel-nand.txt | 10 +-
arch/arm/boot/dts/at91sam9g20.dtsi | 2 +-
arch/arm/boot/dts/at91sam9g25ek.dts | 4 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
arch/arm/boot/dts/at91sam9m10g45ek.dts | 6 +-
arch/arm/boot/dts/at91sam9x5.dtsi | 6 +-
arch/arm/boot/dts/at91sam9x5cm.dtsi | 2 +-
arch/arm/boot/dts/usb_a9g20.dts | 2 +-
arch/arm/mach-at91/at91sam9260_devices.c | 3 +
arch/arm/mach-at91/at91sam9261_devices.c | 3 +
arch/arm/mach-at91/at91sam9263_devices.c | 6 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 11 +-
arch/arm/mach-at91/at91sam9rl_devices.c | 3 +
arch/arm/mach-at91/at91sam9x5.c | 2 +
arch/arm/mach-at91/board-sam9263ek.c | 1 +
arch/arm/mach-at91/board-sam9m10g45ek.c | 1 +
arch/arm/mach-at91/include/mach/board.h | 13 +-
drivers/usb/host/ehci-atmel.c | 1 +
drivers/usb/host/ohci-at91.c | 159 +++++++++++---------
19 files changed, 135 insertions(+), 102 deletions(-)
Thanks, best regards,
--
1.7.9.4
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org
Cc: plagnioj@jcrosoft.com, ludovic.desroches@atmel.com,
linux-kernel@vger.kernel.org, arnd@arndb.de, olof@lixom.net,
Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: [PATCH v2 00/13] at91: 3.4-rc1 fixes
Date: Tue, 3 Apr 2012 09:32:44 +0200 [thread overview]
Message-ID: <cover.1333437885.git.nicolas.ferre@atmel.com> (raw)
Here is a bunch of fixes for AT91 that will go on top of 3.4-rc1.
Some modifications are related to certain drivers (USB ohci-at91 for instance)
but are touching the core AT91 devices/board files and Device Tree files.
The modification of "vbus_pin_active_low" in particular cannot be separated
from the modification of .dts[i] and devices/board files.
I will have to collect "Acked-by" from USB people on the ohci-at91
modifications (Greg?). I will try to find them just after having posted
this v2 today...
Ludovic Desroches (1):
ARM: at91: dt: remove unit-address part for memory nodes
Nicolas Ferre (12):
ARM: at91/at91sam9x5: add clkdev entries for DMA controllers
USB: ohci-at91: fix vbus_pin_active_low handling
ARM: at91/USB host: specify and handle properly vbus_pin_active_low
ARM: at91/dts: USB host vbus is active low
USB: ohci-at91: rework and fix initialization
USB: ohci-at91: change maximum number of ports
USB: ohci-at91: coding style modifications with one-line ifs
USB: ohci-at91: trivial return code name change
ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file
ARM: at91/NAND DT bindings: add comments
USB: ehci-atmel: add needed of.h header file
ARM: at91: fix check of valid GPIO for SPI and USB
.../devicetree/bindings/mtd/atmel-nand.txt | 10 +-
arch/arm/boot/dts/at91sam9g20.dtsi | 2 +-
arch/arm/boot/dts/at91sam9g25ek.dts | 4 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
arch/arm/boot/dts/at91sam9m10g45ek.dts | 6 +-
arch/arm/boot/dts/at91sam9x5.dtsi | 6 +-
arch/arm/boot/dts/at91sam9x5cm.dtsi | 2 +-
arch/arm/boot/dts/usb_a9g20.dts | 2 +-
arch/arm/mach-at91/at91sam9260_devices.c | 3 +
arch/arm/mach-at91/at91sam9261_devices.c | 3 +
arch/arm/mach-at91/at91sam9263_devices.c | 6 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 11 +-
arch/arm/mach-at91/at91sam9rl_devices.c | 3 +
arch/arm/mach-at91/at91sam9x5.c | 2 +
arch/arm/mach-at91/board-sam9263ek.c | 1 +
arch/arm/mach-at91/board-sam9m10g45ek.c | 1 +
arch/arm/mach-at91/include/mach/board.h | 13 +-
drivers/usb/host/ehci-atmel.c | 1 +
drivers/usb/host/ohci-at91.c | 159 +++++++++++---------
19 files changed, 135 insertions(+), 102 deletions(-)
Thanks, best regards,
--
1.7.9.4
next reply other threads:[~2012-04-03 7:32 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-03 7:32 Nicolas Ferre [this message]
2012-04-03 7:32 ` [PATCH v2 00/13] at91: 3.4-rc1 fixes Nicolas Ferre
[not found] ` <cover.1333437885.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-04-03 7:27 ` [PATCH v2 13/13] ARM: at91: dt: remove unit-address part for memory nodes Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
[not found] ` <1db62b280314855c35cb7a3188fc9d9cb8501948.1333437885.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-04-03 15:39 ` Grant Likely
2012-04-04 19:17 ` Olof Johansson
2012-04-04 19:17 ` Olof Johansson
2012-04-04 19:17 ` Olof Johansson
2012-04-07 1:43 ` Grant Likely
2012-04-07 1:43 ` Grant Likely
2012-04-03 7:32 ` [PATCH v2 01/13] ARM: at91/at91sam9x5: add clkdev entries for DMA controllers Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` [PATCH v2 02/13] USB: ohci-at91: fix vbus_pin_active_low handling Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` [PATCH v2 03/13] ARM: at91/USB host: specify and handle properly vbus_pin_active_low Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` [PATCH v2 04/13] ARM: at91/dts: USB host vbus is active low Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` [PATCH v2 05/13] USB: ohci-at91: rework and fix initialization Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` [PATCH v2 06/13] USB: ohci-at91: change maximum number of ports Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 14:11 ` Alan Stern
2012-04-03 14:11 ` Alan Stern
2012-04-03 15:04 ` Nicolas Ferre
2012-04-03 15:04 ` Nicolas Ferre
2012-04-03 15:25 ` Alan Stern
2012-04-03 15:25 ` Alan Stern
2012-04-03 15:30 ` [PATCH v3 06/12] " Nicolas Ferre
2012-04-03 15:30 ` Nicolas Ferre
2012-04-04 16:07 ` Alan Stern
2012-04-04 16:07 ` Alan Stern
2012-04-03 7:32 ` [PATCH v2 07/13] USB: ohci-at91: coding style modifications with one-line ifs Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` [PATCH v2 08/13] USB: ohci-at91: trivial return code name change Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` [PATCH v2 09/13] ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` [PATCH v2 10/13] ARM: at91/NAND DT bindings: add comments Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` [PATCH v2 11/13] USB: ehci-atmel: add needed of.h header file Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 7:32 ` [PATCH v2 12/13] ARM: at91: fix check of valid GPIO for SPI and USB Nicolas Ferre
2012-04-03 7:32 ` Nicolas Ferre
2012-04-03 11:55 ` [PATCH v2 00/13] at91: 3.4-rc1 fixes Nicolas Ferre
2012-04-03 11:55 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1333437885.git.nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.