From: jason@lakedaemon.net (Jason Cooper)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 0/2] impedance-matcher generic improvements
Date: Mon, 29 Jul 2013 21:23:59 +0000 [thread overview]
Message-ID: <cover.1375131816.git.jason@lakedaemon.net> (raw)
In-Reply-To: <51F2A014.7000209@gmail.com>
Daniel,
Here's a patch (plus a cscope target) to attempt to make the impedance-matcher
generic code. Hopefully I'll have time to test tomorrow. All I can say atm is
that it compiles cleanly with and without specifying an appended zImage.
Warning: the code in string.c is little better than psuedo-code, maybe not even
that good. I'm posting this so if anyone else is inclined to work on this,
there's no need to duplicate effort. And, I have a firm belief in the
motivating effects af posting half-assed code. ;-)
Basic idea is to replace a device's stock kernel with this impedance-matcher.
Load the kernel and/or the devicetree blob to desired addresses. Add
'loadaddrs=0xXXXXXXXX,0xYYYYYYYY' to the kernel's command line. Or, if you are
appending, 'loadaddrs=appended,0xYYYYYYYY'. First address is the location of
the kernel, second is the location of the dtb.
Then, for u-boot, 'bootm 0xZZZZZZZZ' where 0xZZZZZZZZ is the address of the
impedance-matcher.
For those interested, a public branch can be found at (prone to rebase!):
git://git.infradead.org/users/jcooper/impedance-matcher.git master
Thomas,
You weren't in the original Cc: of this thread, I added you because this may
help with your shifting register base address issues.
thx,
Jason.
Jason Cooper (2):
add cscope Makefile target
WIP: Get kernel and dtb addresses from command line
.gitignore | 1 +
Makefile | 31 ++++++++++------------
atags.h | 6 +++++
board.c | 88 --------------------------------------------------------------
board.h | 13 ----------
led.c | 54 --------------------------------------
led.h | 6 -----
main.c | 52 +++++++++++++++++++++----------------
string.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
string.h | 8 ++++++
10 files changed, 141 insertions(+), 201 deletions(-)
delete mode 100644 board.c
delete mode 100644 board.h
delete mode 100644 led.c
delete mode 100644 led.h
create mode 100644 string.c
create mode 100644 string.h
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Jason Cooper <jason@lakedaemon.net>
To: Daniel Mack <zonque@gmail.com>, Nicolas Pitre <nico@fluxnic.net>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: devicetree-discuss@lists.ozlabs.org,
Jason Cooper <jason@lakedaemon.net>,
linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 0/2] impedance-matcher generic improvements
Date: Mon, 29 Jul 2013 21:23:59 +0000 [thread overview]
Message-ID: <cover.1375131816.git.jason@lakedaemon.net> (raw)
In-Reply-To: <51F2A014.7000209@gmail.com>
Daniel,
Here's a patch (plus a cscope target) to attempt to make the impedance-matcher
generic code. Hopefully I'll have time to test tomorrow. All I can say atm is
that it compiles cleanly with and without specifying an appended zImage.
Warning: the code in string.c is little better than psuedo-code, maybe not even
that good. I'm posting this so if anyone else is inclined to work on this,
there's no need to duplicate effort. And, I have a firm belief in the
motivating effects af posting half-assed code. ;-)
Basic idea is to replace a device's stock kernel with this impedance-matcher.
Load the kernel and/or the devicetree blob to desired addresses. Add
'loadaddrs=0xXXXXXXXX,0xYYYYYYYY' to the kernel's command line. Or, if you are
appending, 'loadaddrs=appended,0xYYYYYYYY'. First address is the location of
the kernel, second is the location of the dtb.
Then, for u-boot, 'bootm 0xZZZZZZZZ' where 0xZZZZZZZZ is the address of the
impedance-matcher.
For those interested, a public branch can be found at (prone to rebase!):
git://git.infradead.org/users/jcooper/impedance-matcher.git master
Thomas,
You weren't in the original Cc: of this thread, I added you because this may
help with your shifting register base address issues.
thx,
Jason.
Jason Cooper (2):
add cscope Makefile target
WIP: Get kernel and dtb addresses from command line
.gitignore | 1 +
Makefile | 31 ++++++++++------------
atags.h | 6 +++++
board.c | 88 --------------------------------------------------------------
board.h | 13 ----------
led.c | 54 --------------------------------------
led.h | 6 -----
main.c | 52 +++++++++++++++++++++----------------
string.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
string.h | 8 ++++++
10 files changed, 141 insertions(+), 201 deletions(-)
delete mode 100644 board.c
delete mode 100644 board.h
delete mode 100644 led.c
delete mode 100644 led.h
create mode 100644 string.c
create mode 100644 string.h
--
1.8.3.2
next prev parent reply other threads:[~2013-07-29 21:23 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-04 16:56 Appended DTB files for multi-machine kernels Daniel Mack
2013-07-04 16:56 ` Daniel Mack
2013-07-04 17:11 ` Mark Brown
2013-07-04 17:11 ` Mark Brown
2013-07-04 21:34 ` Arnd Bergmann
2013-07-04 21:34 ` Arnd Bergmann
2013-07-04 23:02 ` Daniel Mack
2013-07-04 23:02 ` Daniel Mack
2013-07-05 8:32 ` Magnus Damm
2013-07-05 8:32 ` Magnus Damm
2013-07-04 17:28 ` Nicolas Pitre
2013-07-04 17:28 ` Nicolas Pitre
2013-07-04 17:57 ` Daniel Mack
2013-07-04 17:57 ` Daniel Mack
2013-07-04 18:27 ` Nicolas Pitre
2013-07-04 18:27 ` Nicolas Pitre
2013-07-26 16:13 ` Daniel Mack
2013-07-26 16:13 ` Daniel Mack
2013-07-26 16:44 ` Nicolas Pitre
2013-07-26 16:44 ` Nicolas Pitre
2013-07-29 21:23 ` Jason Cooper [this message]
2013-07-29 21:23 ` [RFC PATCH 0/2] impedance-matcher generic improvements Jason Cooper
2013-07-29 21:24 ` [PATCH 1/2] add cscope Makefile target Jason Cooper
2013-07-29 21:24 ` Jason Cooper
2013-07-29 21:24 ` [RFC PATCH 2/2] WIP: Get kernel and dtb addresses from command line Jason Cooper
2013-07-29 21:24 ` Jason Cooper
2013-07-30 7:48 ` [RFC PATCH 0/2] impedance-matcher generic improvements Daniel Mack
2013-07-30 7:48 ` Daniel Mack
2013-07-30 13:17 ` Jason Cooper
2013-07-30 13:17 ` Jason Cooper
2013-07-30 13:37 ` Daniel Mack
2013-07-30 13:37 ` Daniel Mack
2013-07-30 14:42 ` Jason Cooper
2013-07-30 14:42 ` Jason Cooper
2013-08-02 15:51 ` [RFC PATCH V2 0/9] " Jason Cooper
2013-08-02 15:51 ` [RFC PATCH V2 1/9] add cscope Makefile target Jason Cooper
2013-08-02 15:51 ` [RFC PATCH V2 2/9] separate common functions from board specific Jason Cooper
2013-08-02 15:51 ` [RFC PATCH V2 3/9] rename board.c to board-raumfeld.c Jason Cooper
2013-08-02 15:51 ` [RFC PATCH V2 4/9] s/.name/.compatible/ Jason Cooper
2013-08-02 21:52 ` Stephen Warren
2013-08-03 14:07 ` Jason Cooper
2013-08-03 14:16 ` Daniel Mack
2013-08-02 15:51 ` [RFC PATCH V2 5/9] directly include needed headers Jason Cooper
2013-08-02 15:51 ` [RFC PATCH V2 6/9] serial: split out 8250 code, configurable reg addr Jason Cooper
2013-08-02 15:51 ` [RFC PATCH V2 7/9] add generic board code Jason Cooper
2013-08-02 15:51 ` [RFC PATCH V2 8/9] make appending images/dtbs optional Jason Cooper
2013-08-02 15:51 ` [RFC PATCH V2 9/9] appended dtbs works! Jason Cooper
2013-08-02 19:42 ` Nicolas Pitre
2013-08-02 19:54 ` Jason Cooper
2013-08-02 19:57 ` Jason Cooper
2013-08-02 17:53 ` [RFC PATCH V2 0/9] impedance-matcher generic improvements Daniel Mack
2013-08-02 18:43 ` Jason Cooper
2013-08-02 18:46 ` Daniel Mack
2013-07-04 18:36 ` Appended DTB files for multi-machine kernels Dirk Behme
2013-07-04 18:36 ` Dirk Behme
2013-07-05 18:36 ` Stephen Warren
2013-07-05 18:36 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1375131816.git.jason@lakedaemon.net \
--to=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.