From: stefan@agner.ch
To: swarren@wwwdotorg.org, thierry.reding@gmail.com
Cc: devicetree@vger.kernel.org, linux@arm.linux.org.uk,
linux-kernel@vger.kernel.org, stefan@agner.ch,
marcel@ziswiler.com, linux-tegra@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] ARM: tegra: initial support for Colibri T30
Date: Tue, 13 May 2014 19:27:37 +0200 [thread overview]
Message-ID: <cover.1400001937.git.stefan@agner.ch> (raw)
From: Stefan Agner <stefan@agner.ch>
This patches cooked a while in our repository and is now quite
complete. All is tested on several Colibri T30 modules and
evaluation boards by Marcel and me. The device tree is splitted
into a module part and the carrier board. The former is then
included by the latter (in this case the evaluation board). The
comments "Colibri: " represent the SO-DIMM Pin name as defined
in the Colibri standard, and should be helpful for users
adopting the device tree for other carrier boards.
Stefan Agner (2):
ARM: tegra: enable MCP251x CAN controller and DS1307 RTC
ARM: tegra: initial add of Colibri T30
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 202 ++++++++++++++
arch/arm/boot/dts/tegra30-colibri.dtsi | 375 ++++++++++++++++++++++++++
arch/arm/configs/tegra_defconfig | 6 +
4 files changed, 584 insertions(+)
create mode 100644 arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
create mode 100644 arch/arm/boot/dts/tegra30-colibri.dtsi
--
1.9.2
WARNING: multiple messages have this Message-ID (diff)
From: stefan@agner.ch (stefan at agner.ch)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] ARM: tegra: initial support for Colibri T30
Date: Tue, 13 May 2014 19:27:37 +0200 [thread overview]
Message-ID: <cover.1400001937.git.stefan@agner.ch> (raw)
From: Stefan Agner <stefan@agner.ch>
This patches cooked a while in our repository and is now quite
complete. All is tested on several Colibri T30 modules and
evaluation boards by Marcel and me. The device tree is splitted
into a module part and the carrier board. The former is then
included by the latter (in this case the evaluation board). The
comments "Colibri: " represent the SO-DIMM Pin name as defined
in the Colibri standard, and should be helpful for users
adopting the device tree for other carrier boards.
Stefan Agner (2):
ARM: tegra: enable MCP251x CAN controller and DS1307 RTC
ARM: tegra: initial add of Colibri T30
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 202 ++++++++++++++
arch/arm/boot/dts/tegra30-colibri.dtsi | 375 ++++++++++++++++++++++++++
arch/arm/configs/tegra_defconfig | 6 +
4 files changed, 584 insertions(+)
create mode 100644 arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
create mode 100644 arch/arm/boot/dts/tegra30-colibri.dtsi
--
1.9.2
WARNING: multiple messages have this Message-ID (diff)
From: stefan@agner.ch
To: swarren@wwwdotorg.org, thierry.reding@gmail.com
Cc: linux@arm.linux.org.uk, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
marcel@ziswiler.com, stefan@agner.ch
Subject: [PATCH 0/2] ARM: tegra: initial support for Colibri T30
Date: Tue, 13 May 2014 19:27:37 +0200 [thread overview]
Message-ID: <cover.1400001937.git.stefan@agner.ch> (raw)
From: Stefan Agner <stefan@agner.ch>
This patches cooked a while in our repository and is now quite
complete. All is tested on several Colibri T30 modules and
evaluation boards by Marcel and me. The device tree is splitted
into a module part and the carrier board. The former is then
included by the latter (in this case the evaluation board). The
comments "Colibri: " represent the SO-DIMM Pin name as defined
in the Colibri standard, and should be helpful for users
adopting the device tree for other carrier boards.
Stefan Agner (2):
ARM: tegra: enable MCP251x CAN controller and DS1307 RTC
ARM: tegra: initial add of Colibri T30
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 202 ++++++++++++++
arch/arm/boot/dts/tegra30-colibri.dtsi | 375 ++++++++++++++++++++++++++
arch/arm/configs/tegra_defconfig | 6 +
4 files changed, 584 insertions(+)
create mode 100644 arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
create mode 100644 arch/arm/boot/dts/tegra30-colibri.dtsi
--
1.9.2
next reply other threads:[~2014-05-13 17:27 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-13 17:27 stefan [this message]
2014-05-13 17:27 ` [PATCH 0/2] ARM: tegra: initial support for Colibri T30 stefan
2014-05-13 17:27 ` stefan at agner.ch
2014-05-13 17:27 ` [PATCH 1/2] ARM: tegra: enable MCP251x CAN controller and DS1307 RTC stefan
2014-05-13 17:27 ` stefan
2014-05-13 17:27 ` stefan at agner.ch
[not found] ` <77cfca0a1769d867c8d2919f0040fbd785940fef.1400001937.git.stefan-XLVq0VzYD2Y@public.gmane.org>
2014-05-13 19:57 ` Stephen Warren
2014-05-13 19:57 ` Stephen Warren
2014-05-13 19:57 ` Stephen Warren
2014-05-13 17:27 ` [PATCH 2/2] ARM: tegra: initial add of Colibri T30 stefan
2014-05-13 17:27 ` stefan
2014-05-13 17:27 ` stefan at agner.ch
[not found] ` <d45ec5351ce8ef03256061bdc4b0ba673bd40c66.1400001937.git.stefan-XLVq0VzYD2Y@public.gmane.org>
2014-05-13 19:49 ` Stephen Warren
2014-05-13 19:49 ` Stephen Warren
2014-05-13 19:49 ` Stephen Warren
[not found] ` <53727738.4080901-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-05-14 7:22 ` Marcel Ziswiler
2014-05-14 7:22 ` Marcel Ziswiler
2014-05-14 7:22 ` Marcel Ziswiler
2014-05-14 14:32 ` Thierry Reding
2014-05-14 14:32 ` Thierry Reding
2014-05-14 15:38 ` Stephen Warren
2014-05-14 15:38 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1400001937.git.stefan@agner.ch \
--to=stefan@agner.ch \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=marcel@ziswiler.com \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.