From: Stefan Agner <stefan@agner.ch>
To: linus.walleij@linaro.org, gnurou@gmail.com,
shawn.guo@freescale.com, kernel@pengutronix.de
Cc: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, bpringlemeir@nbsps.com,
stefan@agner.ch
Subject: [PATCH v2 0/5] vf610: Add GPIO support
Date: Tue, 23 Sep 2014 19:37:52 +0200 [thread overview]
Message-ID: <cover.1411492954.git.stefan@agner.ch> (raw)
These include the review of Linus and Bill. I also added a patch
creating the Documentation for the GPIO/PORT module (altough, the
device tree bindings are already in use and not part this patch).
Then there is a small extension to Colibri VF61 device tree, and
because of that change I refrained to add Linus Acked-By to the DTS
patch. Linus, if you agree, can you send the Ack for that patch
again?
Changes in v2:
- Use bit operations in GPIO driver
- Use VF610_ prefix for GPIOS_PER_PORT define
- Drop irq in drivers struct
- Use arch/subsys_initicall for GPIO/pinctrl driver
- Fix log message title
- Add documentation for GPIO/PORT module bindings
- Extended GPIO device tree bindings for Colibri VF61
Stefan Agner (5):
pinctrl: imx: detect uninitialized pins
pinctrl: imx: add gpio pinmux support for vf610
gpio: vf610: add gpiolib/IRQ chip driver for Vybrid
ARM: dts: vf610: use new GPIO support
Documentation: dts: Add bindings for Vybrid GPIO/PORT module
.../devicetree/bindings/gpio/gpio-vf610.txt | 56 ++++
arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 5 +
arch/arm/boot/dts/vf610-colibri.dtsi | 19 ++
arch/arm/boot/dts/vf610-twr.dts | 1 +
arch/arm/boot/dts/vf610.dtsi | 1 +
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-vf610.c | 284 +++++++++++++++++++++
drivers/pinctrl/pinctrl-imx.c | 63 ++++-
drivers/pinctrl/pinctrl-imx.h | 8 +-
drivers/pinctrl/pinctrl-vf610.c | 2 +-
11 files changed, 438 insertions(+), 9 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-vf610.txt
create mode 100644 drivers/gpio/gpio-vf610.c
--
2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: stefan@agner.ch (Stefan Agner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/5] vf610: Add GPIO support
Date: Tue, 23 Sep 2014 19:37:52 +0200 [thread overview]
Message-ID: <cover.1411492954.git.stefan@agner.ch> (raw)
These include the review of Linus and Bill. I also added a patch
creating the Documentation for the GPIO/PORT module (altough, the
device tree bindings are already in use and not part this patch).
Then there is a small extension to Colibri VF61 device tree, and
because of that change I refrained to add Linus Acked-By to the DTS
patch. Linus, if you agree, can you send the Ack for that patch
again?
Changes in v2:
- Use bit operations in GPIO driver
- Use VF610_ prefix for GPIOS_PER_PORT define
- Drop irq in drivers struct
- Use arch/subsys_initicall for GPIO/pinctrl driver
- Fix log message title
- Add documentation for GPIO/PORT module bindings
- Extended GPIO device tree bindings for Colibri VF61
Stefan Agner (5):
pinctrl: imx: detect uninitialized pins
pinctrl: imx: add gpio pinmux support for vf610
gpio: vf610: add gpiolib/IRQ chip driver for Vybrid
ARM: dts: vf610: use new GPIO support
Documentation: dts: Add bindings for Vybrid GPIO/PORT module
.../devicetree/bindings/gpio/gpio-vf610.txt | 56 ++++
arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 5 +
arch/arm/boot/dts/vf610-colibri.dtsi | 19 ++
arch/arm/boot/dts/vf610-twr.dts | 1 +
arch/arm/boot/dts/vf610.dtsi | 1 +
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-vf610.c | 284 +++++++++++++++++++++
drivers/pinctrl/pinctrl-imx.c | 63 ++++-
drivers/pinctrl/pinctrl-imx.h | 8 +-
drivers/pinctrl/pinctrl-vf610.c | 2 +-
11 files changed, 438 insertions(+), 9 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-vf610.txt
create mode 100644 drivers/gpio/gpio-vf610.c
--
2.1.0
next reply other threads:[~2014-09-23 17:38 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-23 17:37 Stefan Agner [this message]
2014-09-23 17:37 ` [PATCH v2 0/5] vf610: Add GPIO support Stefan Agner
2014-09-23 17:37 ` [PATCH v2 1/5] pinctrl: imx: detect uninitialized pins Stefan Agner
2014-09-23 17:37 ` Stefan Agner
2014-09-25 2:15 ` Shawn Guo
2014-09-25 2:15 ` Shawn Guo
2014-09-25 2:15 ` Shawn Guo
2014-09-23 17:37 ` [PATCH v2 2/5] pinctrl: imx: add gpio pinmux support for vf610 Stefan Agner
2014-09-23 17:37 ` Stefan Agner
2014-09-25 2:47 ` Shawn Guo
2014-09-25 2:47 ` Shawn Guo
2014-09-25 2:47 ` Shawn Guo
2014-09-25 7:00 ` Stefan Agner
2014-09-25 7:00 ` Stefan Agner
2014-09-25 9:07 ` Shawn Guo
2014-09-25 9:07 ` Shawn Guo
2014-09-25 9:07 ` Shawn Guo
2014-09-25 9:36 ` Stefan Agner
2014-09-25 9:36 ` Stefan Agner
2014-09-25 16:43 ` Bill Pringlemeir
2014-09-25 16:43 ` Bill Pringlemeir
2014-09-26 10:50 ` Stefan Agner
2014-09-26 10:50 ` Stefan Agner
2014-09-29 15:05 ` Bill Pringlemeir
2014-09-29 15:05 ` Bill Pringlemeir
2014-09-29 15:05 ` Bill Pringlemeir
2014-09-29 17:25 ` Stefan Agner
2014-09-29 17:25 ` Stefan Agner
2014-09-23 17:37 ` [PATCH v2 3/5] gpio: vf610: add gpiolib/IRQ chip driver for Vybrid Stefan Agner
2014-09-23 17:37 ` Stefan Agner
2014-09-23 17:37 ` Stefan Agner
2014-09-25 5:55 ` Shawn Guo
2014-09-25 5:55 ` Shawn Guo
2014-09-25 5:55 ` Shawn Guo
2014-09-25 8:10 ` Stefan Agner
2014-09-25 8:10 ` Stefan Agner
2014-09-23 17:37 ` [PATCH v2 4/5] ARM: dts: vf610: use new GPIO support Stefan Agner
2014-09-23 17:37 ` Stefan Agner
2014-09-23 17:37 ` [PATCH v2 5/5] Documentation: dts: Add bindings for Vybrid GPIO/PORT module Stefan Agner
2014-09-23 17:37 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1411492954.git.stefan@agner.ch \
--to=stefan@agner.ch \
--cc=bpringlemeir@nbsps.com \
--cc=gnurou@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawn.guo@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.