From: Haibo Xu <haibo1.xu@intel.com>
To: kvm-riscv@lists.infradead.org
Subject: [PATCH v4 00/12] RISCV: Add KVM_GET_REG_LIST API
Date: Fri, 23 Jun 2023 18:40:02 +0800 [thread overview]
Message-ID: <cover.1687515463.git.haibo1.xu@intel.com> (raw)
KVM_GET_REG_LIST will dump all register IDs that are available to
KVM_GET/SET_ONE_REG and It's very useful to identify some platform
regression issue during VM migration.
Patch 1-7 re-structured the get-reg-list test in aarch64 to make some
of the code as common test framework that can be shared by riscv.
Patch 8 move reject_set check logic to a function so as to check for
different errno for different registers.
Patch 9 change to do the get/set operation only on present-blessed list.
Patch 10 enabled the KVM_GET_REG_LIST API in riscv.
patch 11-12 added the corresponding kselftest for checking possible
register regressions.
The get-reg-list kvm selftest was ported from aarch64 and tested with
Linux 6.4-rc6 on a Qemu riscv64 virt machine.
---
Changed since v3:
* Rebase to Linux 6.4-rc6
* Address Andrew's suggestions and comments:
* Move reject_set check logic to a function
* Only do get/set tests on present blessed list
* Only enable ISA extension for the specified config
* For disable-not-allowed registers, move them to the filter-reg-list
Andrew Jones (7):
KVM: arm64: selftests: Replace str_with_index with strdup_printf
KVM: arm64: selftests: Drop SVE cap check in print_reg
KVM: arm64: selftests: Remove print_reg's dependency on vcpu_config
KVM: arm64: selftests: Rename vcpu_config and add to kvm_util.h
KVM: arm64: selftests: Delete core_reg_fixup
KVM: arm64: selftests: Split get-reg-list test code
KVM: arm64: selftests: Finish generalizing get-reg-list
Haibo Xu (5):
KVM: arm64: selftests: Move reject_set check logic to a function
KVM: selftests: Only do get/set tests on present blessed list
KVM: riscv: Add KVM_GET_REG_LIST API support
KVM: riscv: selftests: Add finalize_vcpu check in run_test
KVM: riscv: selftests: Add get-reg-list test
Documentation/virt/kvm/api.rst | 2 +-
arch/riscv/kvm/vcpu.c | 375 +++++++++
tools/testing/selftests/kvm/Makefile | 11 +-
.../selftests/kvm/aarch64/get-reg-list.c | 538 ++-----------
tools/testing/selftests/kvm/get-reg-list.c | 439 ++++++++++
.../selftests/kvm/include/kvm_util_base.h | 16 +
.../selftests/kvm/include/riscv/processor.h | 3 +
.../testing/selftests/kvm/include/test_util.h | 2 +
tools/testing/selftests/kvm/lib/test_util.c | 15 +
.../selftests/kvm/riscv/get-reg-list.c | 752 ++++++++++++++++++
10 files changed, 1658 insertions(+), 495 deletions(-)
create mode 100644 tools/testing/selftests/kvm/get-reg-list.c
create mode 100644 tools/testing/selftests/kvm/riscv/get-reg-list.c
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Haibo Xu <haibo1.xu@intel.com>
Cc: xiaobo55x@gmail.com, haibo1.xu@intel.com,
ajones@ventanamicro.com, maz@kernel.org, oliver.upton@linux.dev,
seanjc@google.com, Paolo Bonzini <pbonzini@redhat.com>,
Jonathan Corbet <corbet@lwn.net>,
Anup Patel <anup@brainfault.org>,
Atish Patra <atishp@atishpatra.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>, Shuah Khan <shuah@kernel.org>,
James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
David Matlack <dmatlack@google.com>,
Ben Gardon <bgardon@google.com>,
Ricardo Koller <ricarkol@google.com>,
Vishal Annapurve <vannapurve@google.com>,
Vipin Sharma <vipinsh@google.com>,
Colton Lewis <coltonlewis@google.com>,
kvm@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, kvm-riscv@lists.infradead.org,
linux-riscv@lists.infradead.org, linux-kselftest@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kvmarm@lists.linux.dev
Subject: [PATCH v4 00/12] RISCV: Add KVM_GET_REG_LIST API
Date: Fri, 23 Jun 2023 18:40:02 +0800 [thread overview]
Message-ID: <cover.1687515463.git.haibo1.xu@intel.com> (raw)
KVM_GET_REG_LIST will dump all register IDs that are available to
KVM_GET/SET_ONE_REG and It's very useful to identify some platform
regression issue during VM migration.
Patch 1-7 re-structured the get-reg-list test in aarch64 to make some
of the code as common test framework that can be shared by riscv.
Patch 8 move reject_set check logic to a function so as to check for
different errno for different registers.
Patch 9 change to do the get/set operation only on present-blessed list.
Patch 10 enabled the KVM_GET_REG_LIST API in riscv.
patch 11-12 added the corresponding kselftest for checking possible
register regressions.
The get-reg-list kvm selftest was ported from aarch64 and tested with
Linux 6.4-rc6 on a Qemu riscv64 virt machine.
---
Changed since v3:
* Rebase to Linux 6.4-rc6
* Address Andrew's suggestions and comments:
* Move reject_set check logic to a function
* Only do get/set tests on present blessed list
* Only enable ISA extension for the specified config
* For disable-not-allowed registers, move them to the filter-reg-list
Andrew Jones (7):
KVM: arm64: selftests: Replace str_with_index with strdup_printf
KVM: arm64: selftests: Drop SVE cap check in print_reg
KVM: arm64: selftests: Remove print_reg's dependency on vcpu_config
KVM: arm64: selftests: Rename vcpu_config and add to kvm_util.h
KVM: arm64: selftests: Delete core_reg_fixup
KVM: arm64: selftests: Split get-reg-list test code
KVM: arm64: selftests: Finish generalizing get-reg-list
Haibo Xu (5):
KVM: arm64: selftests: Move reject_set check logic to a function
KVM: selftests: Only do get/set tests on present blessed list
KVM: riscv: Add KVM_GET_REG_LIST API support
KVM: riscv: selftests: Add finalize_vcpu check in run_test
KVM: riscv: selftests: Add get-reg-list test
Documentation/virt/kvm/api.rst | 2 +-
arch/riscv/kvm/vcpu.c | 375 +++++++++
tools/testing/selftests/kvm/Makefile | 11 +-
.../selftests/kvm/aarch64/get-reg-list.c | 538 ++-----------
tools/testing/selftests/kvm/get-reg-list.c | 439 ++++++++++
.../selftests/kvm/include/kvm_util_base.h | 16 +
.../selftests/kvm/include/riscv/processor.h | 3 +
.../testing/selftests/kvm/include/test_util.h | 2 +
tools/testing/selftests/kvm/lib/test_util.c | 15 +
.../selftests/kvm/riscv/get-reg-list.c | 752 ++++++++++++++++++
10 files changed, 1658 insertions(+), 495 deletions(-)
create mode 100644 tools/testing/selftests/kvm/get-reg-list.c
create mode 100644 tools/testing/selftests/kvm/riscv/get-reg-list.c
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Haibo Xu <haibo1.xu@intel.com>
To: unlisted-recipients:; (no To-header on input)
Cc: xiaobo55x@gmail.com, haibo1.xu@intel.com,
ajones@ventanamicro.com, maz@kernel.org, oliver.upton@linux.dev,
seanjc@google.com, Paolo Bonzini <pbonzini@redhat.com>,
Jonathan Corbet <corbet@lwn.net>,
Anup Patel <anup@brainfault.org>,
Atish Patra <atishp@atishpatra.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>, Shuah Khan <shuah@kernel.org>,
James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
David Matlack <dmatlack@google.com>,
Ben Gardon <bgardon@google.com>,
Ricardo Koller <ricarkol@google.com>,
Vishal Annapurve <vannapurve@google.com>,
Vipin Sharma <vipinsh@google.com>,
Colton Lewis <coltonlewis@google.com>,
kvm@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, kvm-riscv@lists.infradead.org,
linux-riscv@lists.infradead.org, linux-kselftest@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kvmarm@lists.linux.dev
Subject: [PATCH v4 00/12] RISCV: Add KVM_GET_REG_LIST API
Date: Fri, 23 Jun 2023 18:40:02 +0800 [thread overview]
Message-ID: <cover.1687515463.git.haibo1.xu@intel.com> (raw)
KVM_GET_REG_LIST will dump all register IDs that are available to
KVM_GET/SET_ONE_REG and It's very useful to identify some platform
regression issue during VM migration.
Patch 1-7 re-structured the get-reg-list test in aarch64 to make some
of the code as common test framework that can be shared by riscv.
Patch 8 move reject_set check logic to a function so as to check for
different errno for different registers.
Patch 9 change to do the get/set operation only on present-blessed list.
Patch 10 enabled the KVM_GET_REG_LIST API in riscv.
patch 11-12 added the corresponding kselftest for checking possible
register regressions.
The get-reg-list kvm selftest was ported from aarch64 and tested with
Linux 6.4-rc6 on a Qemu riscv64 virt machine.
---
Changed since v3:
* Rebase to Linux 6.4-rc6
* Address Andrew's suggestions and comments:
* Move reject_set check logic to a function
* Only do get/set tests on present blessed list
* Only enable ISA extension for the specified config
* For disable-not-allowed registers, move them to the filter-reg-list
Andrew Jones (7):
KVM: arm64: selftests: Replace str_with_index with strdup_printf
KVM: arm64: selftests: Drop SVE cap check in print_reg
KVM: arm64: selftests: Remove print_reg's dependency on vcpu_config
KVM: arm64: selftests: Rename vcpu_config and add to kvm_util.h
KVM: arm64: selftests: Delete core_reg_fixup
KVM: arm64: selftests: Split get-reg-list test code
KVM: arm64: selftests: Finish generalizing get-reg-list
Haibo Xu (5):
KVM: arm64: selftests: Move reject_set check logic to a function
KVM: selftests: Only do get/set tests on present blessed list
KVM: riscv: Add KVM_GET_REG_LIST API support
KVM: riscv: selftests: Add finalize_vcpu check in run_test
KVM: riscv: selftests: Add get-reg-list test
Documentation/virt/kvm/api.rst | 2 +-
arch/riscv/kvm/vcpu.c | 375 +++++++++
tools/testing/selftests/kvm/Makefile | 11 +-
.../selftests/kvm/aarch64/get-reg-list.c | 538 ++-----------
tools/testing/selftests/kvm/get-reg-list.c | 439 ++++++++++
.../selftests/kvm/include/kvm_util_base.h | 16 +
.../selftests/kvm/include/riscv/processor.h | 3 +
.../testing/selftests/kvm/include/test_util.h | 2 +
tools/testing/selftests/kvm/lib/test_util.c | 15 +
.../selftests/kvm/riscv/get-reg-list.c | 752 ++++++++++++++++++
10 files changed, 1658 insertions(+), 495 deletions(-)
create mode 100644 tools/testing/selftests/kvm/get-reg-list.c
create mode 100644 tools/testing/selftests/kvm/riscv/get-reg-list.c
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Haibo Xu <haibo1.xu@intel.com>
Cc: xiaobo55x@gmail.com, haibo1.xu@intel.com,
ajones@ventanamicro.com, maz@kernel.org, oliver.upton@linux.dev,
seanjc@google.com, Paolo Bonzini <pbonzini@redhat.com>,
Jonathan Corbet <corbet@lwn.net>,
Anup Patel <anup@brainfault.org>,
Atish Patra <atishp@atishpatra.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>, Shuah Khan <shuah@kernel.org>,
James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
David Matlack <dmatlack@google.com>,
Ben Gardon <bgardon@google.com>,
Ricardo Koller <ricarkol@google.com>,
Vishal Annapurve <vannapurve@google.com>,
Vipin Sharma <vipinsh@google.com>,
Colton Lewis <coltonlewis@google.com>,
kvm@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, kvm-riscv@lists.infradead.org,
linux-riscv@lists.infradead.org, linux-kselftest@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kvmarm@lists.linux.dev
Subject: [PATCH v4 00/12] RISCV: Add KVM_GET_REG_LIST API
Date: Fri, 23 Jun 2023 18:40:02 +0800 [thread overview]
Message-ID: <cover.1687515463.git.haibo1.xu@intel.com> (raw)
KVM_GET_REG_LIST will dump all register IDs that are available to
KVM_GET/SET_ONE_REG and It's very useful to identify some platform
regression issue during VM migration.
Patch 1-7 re-structured the get-reg-list test in aarch64 to make some
of the code as common test framework that can be shared by riscv.
Patch 8 move reject_set check logic to a function so as to check for
different errno for different registers.
Patch 9 change to do the get/set operation only on present-blessed list.
Patch 10 enabled the KVM_GET_REG_LIST API in riscv.
patch 11-12 added the corresponding kselftest for checking possible
register regressions.
The get-reg-list kvm selftest was ported from aarch64 and tested with
Linux 6.4-rc6 on a Qemu riscv64 virt machine.
---
Changed since v3:
* Rebase to Linux 6.4-rc6
* Address Andrew's suggestions and comments:
* Move reject_set check logic to a function
* Only do get/set tests on present blessed list
* Only enable ISA extension for the specified config
* For disable-not-allowed registers, move them to the filter-reg-list
Andrew Jones (7):
KVM: arm64: selftests: Replace str_with_index with strdup_printf
KVM: arm64: selftests: Drop SVE cap check in print_reg
KVM: arm64: selftests: Remove print_reg's dependency on vcpu_config
KVM: arm64: selftests: Rename vcpu_config and add to kvm_util.h
KVM: arm64: selftests: Delete core_reg_fixup
KVM: arm64: selftests: Split get-reg-list test code
KVM: arm64: selftests: Finish generalizing get-reg-list
Haibo Xu (5):
KVM: arm64: selftests: Move reject_set check logic to a function
KVM: selftests: Only do get/set tests on present blessed list
KVM: riscv: Add KVM_GET_REG_LIST API support
KVM: riscv: selftests: Add finalize_vcpu check in run_test
KVM: riscv: selftests: Add get-reg-list test
Documentation/virt/kvm/api.rst | 2 +-
arch/riscv/kvm/vcpu.c | 375 +++++++++
tools/testing/selftests/kvm/Makefile | 11 +-
.../selftests/kvm/aarch64/get-reg-list.c | 538 ++-----------
tools/testing/selftests/kvm/get-reg-list.c | 439 ++++++++++
.../selftests/kvm/include/kvm_util_base.h | 16 +
.../selftests/kvm/include/riscv/processor.h | 3 +
.../testing/selftests/kvm/include/test_util.h | 2 +
tools/testing/selftests/kvm/lib/test_util.c | 15 +
.../selftests/kvm/riscv/get-reg-list.c | 752 ++++++++++++++++++
10 files changed, 1658 insertions(+), 495 deletions(-)
create mode 100644 tools/testing/selftests/kvm/get-reg-list.c
create mode 100644 tools/testing/selftests/kvm/riscv/get-reg-list.c
--
2.34.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Haibo Xu <haibo1.xu@intel.com>
Cc: xiaobo55x@gmail.com, haibo1.xu@intel.com,
ajones@ventanamicro.com, maz@kernel.org, oliver.upton@linux.dev,
seanjc@google.com, Paolo Bonzini <pbonzini@redhat.com>,
Jonathan Corbet <corbet@lwn.net>,
Anup Patel <anup@brainfault.org>,
Atish Patra <atishp@atishpatra.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>, Shuah Khan <shuah@kernel.org>,
James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
David Matlack <dmatlack@google.com>,
Ben Gardon <bgardon@google.com>,
Ricardo Koller <ricarkol@google.com>,
Vishal Annapurve <vannapurve@google.com>,
Vipin Sharma <vipinsh@google.com>,
Colton Lewis <coltonlewis@google.com>,
kvm@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, kvm-riscv@lists.infradead.org,
linux-riscv@lists.infradead.org, linux-kselftest@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kvmarm@lists.linux.dev
Subject: [PATCH v4 00/12] RISCV: Add KVM_GET_REG_LIST API
Date: Fri, 23 Jun 2023 18:40:02 +0800 [thread overview]
Message-ID: <cover.1687515463.git.haibo1.xu@intel.com> (raw)
KVM_GET_REG_LIST will dump all register IDs that are available to
KVM_GET/SET_ONE_REG and It's very useful to identify some platform
regression issue during VM migration.
Patch 1-7 re-structured the get-reg-list test in aarch64 to make some
of the code as common test framework that can be shared by riscv.
Patch 8 move reject_set check logic to a function so as to check for
different errno for different registers.
Patch 9 change to do the get/set operation only on present-blessed list.
Patch 10 enabled the KVM_GET_REG_LIST API in riscv.
patch 11-12 added the corresponding kselftest for checking possible
register regressions.
The get-reg-list kvm selftest was ported from aarch64 and tested with
Linux 6.4-rc6 on a Qemu riscv64 virt machine.
---
Changed since v3:
* Rebase to Linux 6.4-rc6
* Address Andrew's suggestions and comments:
* Move reject_set check logic to a function
* Only do get/set tests on present blessed list
* Only enable ISA extension for the specified config
* For disable-not-allowed registers, move them to the filter-reg-list
Andrew Jones (7):
KVM: arm64: selftests: Replace str_with_index with strdup_printf
KVM: arm64: selftests: Drop SVE cap check in print_reg
KVM: arm64: selftests: Remove print_reg's dependency on vcpu_config
KVM: arm64: selftests: Rename vcpu_config and add to kvm_util.h
KVM: arm64: selftests: Delete core_reg_fixup
KVM: arm64: selftests: Split get-reg-list test code
KVM: arm64: selftests: Finish generalizing get-reg-list
Haibo Xu (5):
KVM: arm64: selftests: Move reject_set check logic to a function
KVM: selftests: Only do get/set tests on present blessed list
KVM: riscv: Add KVM_GET_REG_LIST API support
KVM: riscv: selftests: Add finalize_vcpu check in run_test
KVM: riscv: selftests: Add get-reg-list test
Documentation/virt/kvm/api.rst | 2 +-
arch/riscv/kvm/vcpu.c | 375 +++++++++
tools/testing/selftests/kvm/Makefile | 11 +-
.../selftests/kvm/aarch64/get-reg-list.c | 538 ++-----------
tools/testing/selftests/kvm/get-reg-list.c | 439 ++++++++++
.../selftests/kvm/include/kvm_util_base.h | 16 +
.../selftests/kvm/include/riscv/processor.h | 3 +
.../testing/selftests/kvm/include/test_util.h | 2 +
tools/testing/selftests/kvm/lib/test_util.c | 15 +
.../selftests/kvm/riscv/get-reg-list.c | 752 ++++++++++++++++++
10 files changed, 1658 insertions(+), 495 deletions(-)
create mode 100644 tools/testing/selftests/kvm/get-reg-list.c
create mode 100644 tools/testing/selftests/kvm/riscv/get-reg-list.c
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-06-23 10:40 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-23 10:40 Haibo Xu [this message]
2023-06-23 10:40 ` [PATCH v4 00/12] RISCV: Add KVM_GET_REG_LIST API Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 01/12] KVM: arm64: selftests: Replace str_with_index with strdup_printf Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 02/12] KVM: arm64: selftests: Drop SVE cap check in print_reg Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 03/12] KVM: arm64: selftests: Remove print_reg's dependency on vcpu_config Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 04/12] KVM: arm64: selftests: Rename vcpu_config and add to kvm_util.h Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 05/12] KVM: arm64: selftests: Delete core_reg_fixup Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 06/12] KVM: arm64: selftests: Split get-reg-list test code Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 07/12] KVM: arm64: selftests: Finish generalizing get-reg-list Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 08/12] KVM: arm64: selftests: Move reject_set check logic to a function Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-27 9:09 ` Andrew Jones
2023-06-27 9:09 ` Andrew Jones
2023-06-27 9:09 ` Andrew Jones
2023-06-27 9:09 ` Andrew Jones
2023-06-28 5:58 ` Haibo Xu
2023-06-28 5:58 ` Haibo Xu
2023-06-28 5:58 ` Haibo Xu
2023-06-28 5:58 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 09/12] KVM: selftests: Only do get/set tests on present blessed list Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-27 9:11 ` Andrew Jones
2023-06-27 9:11 ` Andrew Jones
2023-06-27 9:11 ` Andrew Jones
2023-06-27 9:11 ` Andrew Jones
2023-06-28 6:00 ` Haibo Xu
2023-06-28 6:00 ` Haibo Xu
2023-06-28 6:00 ` Haibo Xu
2023-06-28 6:00 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 10/12] KVM: riscv: Add KVM_GET_REG_LIST API support Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 11/12] KVM: riscv: selftests: Add finalize_vcpu check in run_test Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-27 9:16 ` Andrew Jones
2023-06-27 9:16 ` Andrew Jones
2023-06-27 9:16 ` Andrew Jones
2023-06-27 9:16 ` Andrew Jones
2023-06-28 10:29 ` Haibo Xu
2023-06-28 10:29 ` Haibo Xu
2023-06-28 10:29 ` Haibo Xu
2023-06-28 10:29 ` Haibo Xu
2023-06-23 10:40 ` [PATCH v4 12/12] KVM: riscv: selftests: Add get-reg-list test Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-23 10:40 ` Haibo Xu
2023-06-27 9:25 ` Andrew Jones
2023-06-27 9:25 ` Andrew Jones
2023-06-27 9:25 ` Andrew Jones
2023-06-27 9:25 ` Andrew Jones
2023-06-28 10:28 ` Haibo Xu
2023-06-28 10:28 ` Haibo Xu
2023-06-28 10:28 ` Haibo Xu
2023-06-28 10:28 ` Haibo Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1687515463.git.haibo1.xu@intel.com \
--to=haibo1.xu@intel.com \
--cc=kvm-riscv@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.