* [parisc-linux] Re: FDDI (defxx) and Linux/PA = HPMC [not found] <e6eae02905041013203d0517fd@mail.gmail.com> @ 2005-04-10 21:31 ` Max Grabert 2005-04-11 22:44 ` Max Grabert 0 siblings, 1 reply; 2+ messages in thread From: Max Grabert @ 2005-04-10 21:31 UTC (permalink / raw) To: Linux/PA [-- Attachment #1: Type: text/plain, Size: 413 bytes --] On Apr 10, 2005 9:20 PM, Max Grabert <parisc@gmail.com> wrote: [...] > I'm trying to get FDDI working on Linux/PA. > > So I put a DEFPA card into my c3k (2.6.12-rc2-pa1, 32bit, > gcc-3.4, Debian/testing), but it didn't get far: Sorry, hat to reply to myself, forgot to attach a 'ser pim' output ... Note the driver (defxx.c) is quite old, but is reported to work on x86 and 2.6 (and ppc on 2.4). HTH, Max [-- Attachment #2: serpim.txt --] [-- Type: text/plain, Size: 8925 bytes --] defxx: v1.07 2004/08/14 Lawrence V. Stefani and others 0000:01:04.0: DEFPA at I/O addr = 0x12100, IRQ = 21, Hardware addr = CB-F8-00-00-00-00 0000:01:04.0: registered as fddi0 Backtrace: [<10113640>] inl+0x38/0x44 [<10688584>] dfx_init+0x60/0xc4 [<1010397c>] init+0xa4/0x238 [<1010bc5c>] ret_from_kernel_thread+0x1c/0x24 High Priority Machine Check (HPMC): Code=1 regs=105c7080 (Addr=00000000) YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00000000000001101111111100001111 Not tainted r00-03 00000000 106d1010 10113640 00000001 r04-07 00000000 0030a310 ffffffed 00000000 r08-11 105d40d0 000f41fa 3adf4500 106c03c8 r12-15 105d41f8 3b9aca00 106c0010 105d6010 r16-19 f00008c4 f000017c f0000174 fee00000 r20-23 4fa028a4 00000001 1031ec2c 00000000 r24-27 00000000 00000c80 10706480 105bd010 r28-31 fee00c80 111bf8d4 111f4180 10113640 sr0-3 00000000 00000000 00000000 00000000 sr4-7 00000000 00000000 00000000 00000000 IASQ: 00000000 00000000 IAOQ: 1031ec3c 1031ec40 IIR: 0f80019c ISR: a627fffb IOR: 80200c80 CPU: 0 CR30: 111f4000 CR31: 10670000 ORIG_R28: 00000000 IAOQ[0]: lba_astro_in32+0x10/0x24 IAOQ[1]: lba_astro_in32+0x14/0x24 RP(r2): inl+0x38/0x44 Kernel panic - not syncing: High Priority Machine Check (HPMC) SER PIM: ======== Main Menu: Enter command > ser pim PROCESSOR PIM INFORMATION ----------------- Processor 0 HPMC Information ------------------ Timestamp = Sun Apr 10 20:41:01 GMT 2005 (20:05:04:10:20:41:01) HPMC Chassis Codes = 2cbf0 2500b 2cbfb General Registers 0 - 31 00-03 0000000000000000 00000000106d1010 0000000010113640 0000000000000001 04-07 0000000000000000 000000000030a310 ffffffffffffffed 0000000000000000 08-11 00000000105d40d0 00000000000f41fa 000000003adf4500 00000000106c03c8 12-15 00000000105d41f8 000000003b9aca00 00000000106c0010 00000000105d6010 16-19 00000000f00008c4 00000000f000017c 00000000f0000174 00000000fee00000 20-23 000000004fa028a4 0000000000000001 000000001031ec2c 0000000000000000 24-27 0000000000000000 0000000000000c80 0000000010706480 00000000105bd010 28-31 00000000fee00c80 00000000111bf8d4 00000000111f4180 0000000010113640 <Press any key to continue (q to quit)> Control Registers 0 - 31 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 08-11 0000000000000000 0000000000000000 00000000000000c0 000000000000001f 12-15 0000000000000000 0000000000000000 000000000010b000 00000000fff80000 16-19 0000000c9c745d28 0000000000000000 000000001031ec3c 000000000f80019c 20-23 00000000a627fffb c000000080200c80 000000ff0006ff0f 0000000080000000 24-27 0000000000662000 0000000000662000 0000000000044021 00000000f0412000 28-31 0000000055555555 0000000055555555 00000000111f4000 0000000010670000 Space Registers 0 - 7 00-03 00000000 00000000 00000000 00000000 04-07 00000000 00000000 00000000 00000000 <Press any key to continue (q to quit)> IIA Space = 0x0000000000000000 IIA Offset = 0x000000001031ec40 Check Type = 0x20000000 CPU State = 0x9e000004 Cache Check = 0x00000000 TLB Check = 0x00000000 Bus Check = 0x0030103b Assists Check = 0x00000000 Assist State = 0x00000000 Path Info = 0x00000000 System Responder Address = 0x000000fffee00c80 System Requestor Address = 0xfffffffffffa0000 Floating-Point Registers 0 - 31 00-03 0000001f00000000 0000001f00000000 0000001f00000000 0000001f00000000 04-07 0000000000000000 5555555555555555 5555555555555555 5555555555555555 08-11 5555555555555555 5555555555555555 5555555555555555 5555555555555555 12-15 5555555555555555 5555555555555555 5555555555555555 5555555555555555 16-19 5555555555555555 5555555555555555 5555555555555555 5555555555555555 20-23 5555555555555555 5555555555555555 0640000003c08c00 00000000431bde83 24-27 17d7840000000000 5555555555555555 5555555555555555 5555555555555555 28-31 5555555555555555 5555555555555555 5555555555555555 5555555555555555 <Press any key to continue (q to quit)> '9000/785 B,C,J Workstation Unarchitected (per-CPU)', rev 1, 140 bytes: Check Summary = 0xcb81041008000000 Available Memory = 0x0000000040000000 CPU Diagnose Register 2 = 0x0203000000000004 CPU Status Register 0 = 0x2420c20000000000 CPU Status Register 1 = 0x8002000000000000 SADD LOG = 0xc10f00fffee00c80 Read Short LOG = 0xc1af00fffee00c80 ERROR_STATUS = 0x0000000000100010 MEM_ADDR = 0x000001ff3fffffff MEM_SYND = 0x0000000000000000 MEM_ADDR_CORR = 0x000001ff3fffffff MEM_SYND_CORR = 0x0000000000000000 RUN_DATA_HIGH = 0xc1bff0fffed08040 RUN_DATA_LOW = 0xc1bff0fffed08040 RUN_CTRL = 0x0000021c00001418 RUN_ADDR = 0xc1bff0fffed08040 System Responder Path = 0x00ffffffffffffff HPMC PIM Analysis Information: Timestamp = Sun Apr 10 20:41:01 GMT 2005 (20:05:04:10:20:41:01) '9000/785 B,C,J Workstation HPMC PIM Analysis (per-CPU)', rev 0, 1304 bytes: A Data I/O Fetch Timeout occurred while CPU 0 was requesting information from a device with the address 0xfffee00c80. Memory/IO Controller Error Analysis Information: The Memory/IO Controller only observed the Broadcast Error. It did not log any additional information about the HPMC. <Press any key to continue (q to quit)> ----------------- Processor 0 LPMC Information ------------------ Check Type = 0x00000000 I/D Cache Parity Info = 0x00000000 Cache Check = 0x00000000 TLB Check = 0x00000000 Bus Check = 0x00000000 Assists Check = 0x00000000 Assist State = 0x00000000 Path Info = 0x00000000 System Responder Address = 0x0000000000000000 System Requestor Address = 0x0000000000000000 ----------------- Processor 0 TOC Information ------------------- General Registers 0 - 31 00-03 0000000000000000 000000001053d660 0000000010126a7c 00000000106c0810 04-07 000000000002abd5 0000000000000000 00000000106c00d0 000000000010b024 08-11 0000000000000000 0000000000000000 00000000fffa0000 00000000f0408cd8 12-15 00000000f0407ef0 000000003b9aca00 00000000106c0010 00000000105d6010 16-19 00000000105c7080 00000000f000017c 00000000f0000174 00000000000458fe 20-23 0000001d86116d05 0000000000061a80 00000000101268f0 0000000d37c0837b 24-27 00000000001abb67 0000000000000000 000000000002abd5 00000000105bd010 28-31 0000000000000000 00000000006be960 00000000105c7480 0000000010126a7c <Press any key to continue (q to quit)> Control Registers 0 - 31 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 08-11 0000000000000000 0000000000000000 00000000000000c0 000000000000003f 12-15 0000000000000000 0000000000000000 000000000010b000 0000000000000000 16-19 0000001d861962a0 0000000000000000 0000000010126ac8 00000000020008b3 20-23 0000000010240001 0000000071dc7470 000000ff0004f80f 0000000080000000 24-27 0000000000662000 0000000000662000 0000000000044021 00000000f0412000 28-31 0000000055555555 0000000055555555 00000000111f4000 0000000010670000 Space Registers 0 - 7 00-03 00000000 00000000 00000000 00000000 04-07 00000000 00000000 00000000 00000000 IIA Space = 0x0000000000000000 IIA Offset = 0x0000000010126acc CPU State = 0x9e000001 <Press any key to continue (q to quit)> Memory Error Log Information: Timestamp = Sun Apr 10 20:41:01 GMT 2005 (20:05:04:10:20:41:01) '9000/785 B,C,J Workstation Memory Error Log', rev 0, 64 bytes: No memory errors logged I/O Module Error Log Information: Timestamp = Sun Apr 10 20:41:01 GMT 2005 (20:05:04:10:20:41:01) '9000/785 B,C,J Workstation IO Error Log', rev 0, 228 bytes: Rope Word1 Word2 Word3 ------ ------------ ------------ 0 0x0002e000 0x0e0cc009 0x0000000000000c80 1 0x00000000 0x1e0cc009 0x00000000fed32048 2 ---------- 0x2e0cc009 ------------------ 3 ---------- 0x3e0cc009 ------------------ 4 0x00000000 0x4e0cc009 0x00000000fed38048 5 ---------- 0x5e0cc009 ------------------ 6 0x00000000 0x6e0cc009 0x00000000fed3c048 7 ---------- 0x7e0cc009 ------------------ [-- Attachment #3: Type: text/plain, Size: 169 bytes --] _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux ^ permalink raw reply [flat|nested] 2+ messages in thread
* [parisc-linux] Re: FDDI (defxx) and Linux/PA = HPMC 2005-04-10 21:31 ` [parisc-linux] Re: FDDI (defxx) and Linux/PA = HPMC Max Grabert @ 2005-04-11 22:44 ` Max Grabert 0 siblings, 0 replies; 2+ messages in thread From: Max Grabert @ 2005-04-11 22:44 UTC (permalink / raw) To: Linux/PA [-- Attachment #1: Type: text/plain, Size: 1154 bytes --] On Apr 10, 2005 10:31 PM, Max Grabert <parisc@gmail.com> wrote: > On Apr 10, 2005 9:20 PM, Max Grabert <parisc@gmail.com> wrote: > > [...] > > > I'm trying to get FDDI working on Linux/PA. > > > > So I put a DEFPA card into my c3k (2.6.12-rc2-pa1, 32bit, > > gcc-3.4, Debian/testing), but it didn't get far: > > Sorry, hat to reply to myself, forgot to attach a 'ser pim' output ... > > Note the driver (defxx.c) is quite old, but is reported to > work on x86 and 2.6 (and ppc on 2.4). Well, apparently the report that the driver was working on ppc is not true. The driver is not big-endian safe. BTW, the HPMC is caused by drivers/net/defxx.c#527, which is the initialization routine for EISA cards, which is executed regardless whether there is EISA support compiled into the kernel or not. The inl() in there causes the HPMC. Attached a patch that adresses at least the obvious big-endian issues and disables the EISA initialization if CONFIG_EISA is not defined. With the patch my c3k boots up, detects the card and it seems to work, but I can't test it properly right now, since I don't have a second FDDI card here (yet). Greetings, Max [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: fddi.patch --] [-- Type: text/x-patch; name="fddi.patch", Size: 900 bytes --] --- linux-2.6/drivers/net/defxx.c 2005-04-11 23:17:24.000000000 +0100 +++ defxx.c 2005-04-11 23:34:51.000000000 +0100 @@ -534,7 +534,7 @@ } return rc; } -\f + /* * ================ * = dfx_bus_init = @@ -857,6 +857,7 @@ print_name); return(DFX_K_FAILURE); } + data = cpu_to_le32(data); memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32)); if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0, @@ -865,6 +866,7 @@ print_name); return(DFX_K_FAILURE); } + data = cpu_to_le32(data); memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16)); /* @@ -3433,7 +3435,11 @@ rc_pci = pci_module_init(&dfx_driver); if (rc_pci >= 0) dfx_have_pci = 1; +#ifdef CONFIG_EISA rc_eisa = dfx_eisa_init(); +#else + rc_eisa = -1; +#endif if (rc_eisa >= 0) dfx_have_eisa = 1; return ((rc_eisa < 0) ? 0 : rc_eisa) + ((rc_pci < 0) ? 0 : rc_pci); [-- Attachment #3: Type: text/plain, Size: 169 bytes --] _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-04-11 22:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <e6eae02905041013203d0517fd@mail.gmail.com>
2005-04-10 21:31 ` [parisc-linux] Re: FDDI (defxx) and Linux/PA = HPMC Max Grabert
2005-04-11 22:44 ` Max Grabert
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.