From: Kevin Cernekee <cernekee@gmail.com>
To: Eric Dumazet <eric.dumazet@gmail.com>,
Patrick McHardy <kaber@trash.net>,
"David S. Miller" <davem@davemloft.net>,
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>,
"Pekka Savola (ipv6)" <pek>
Cc: netfilter-devel@vger.kernel.org, netfilter@vger.kernel.org,
coreteam@netfilter.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org
Subject: [PATCH v3] netfilter: nf_conntrack_sip: Handle Cisco 7941/7945 IP phones
Date: Sun, 21 Nov 2010 18:40:11 -0800 [thread overview]
Message-ID: <f0955e6c2110044fa058d0f3ecf945ca@localhost> (raw)
[v3:
Only activate the new forced_dport logic if the IP matches, but the
port does not. ]
Most SIP devices use a source port of 5060/udp on SIP requests, so the
response automatically comes back to port 5060:
phone_ip:5060 -> proxy_ip:5060 REGISTER
proxy_ip:5060 -> phone_ip:5060 100 Trying
The newer Cisco IP phones, however, use a randomly chosen high source
port for the SIP request but expect the response on port 5060:
phone_ip:49173 -> proxy_ip:5060 REGISTER
proxy_ip:5060 -> phone_ip:5060 100 Trying
Standard Linux NAT, with or without nf_nat_sip, will send the reply back
to port 49173, not 5060:
phone_ip:49173 -> proxy_ip:5060 REGISTER
proxy_ip:5060 -> phone_ip:49173 100 Trying
But the phone is not listening on 49173, so it will never see the reply.
This patch modifies nf_*_sip to work around this quirk by extracting
the SIP response port from the Via: header, iff the source IP in the
packet header matches the source IP in the SIP request.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
---
include/linux/netfilter/nf_conntrack_sip.h | 3 +++
net/ipv4/netfilter/nf_nat_sip.c | 26 +++++++++++++++++++++++---
net/netfilter/nf_conntrack_sip.c | 17 +++++++++++++++++
3 files changed, 43 insertions(+), 3 deletions(-)
diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h
index 0ce91d5..feda699 100644
--- a/include/linux/netfilter/nf_conntrack_sip.h
+++ b/include/linux/netfilter/nf_conntrack_sip.h
@@ -2,12 +2,15 @@
#define __NF_CONNTRACK_SIP_H__
#ifdef __KERNEL__
+#include <linux/types.h>
+
#define SIP_PORT 5060
#define SIP_TIMEOUT 3600
struct nf_ct_sip_master {
unsigned int register_cseq;
unsigned int invite_cseq;
+ __be16 forced_dport;
};
enum sip_expectation_classes {
diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c
index e40cf78..e5856b0 100644
--- a/net/ipv4/netfilter/nf_nat_sip.c
+++ b/net/ipv4/netfilter/nf_nat_sip.c
@@ -73,6 +73,7 @@ static int map_addr(struct sk_buff *skb, unsigned int dataoff,
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
unsigned int buflen;
__be32 newaddr;
@@ -85,7 +86,8 @@ static int map_addr(struct sk_buff *skb, unsigned int dataoff,
} else if (ct->tuplehash[dir].tuple.dst.u3.ip == addr->ip &&
ct->tuplehash[dir].tuple.dst.u.udp.port == port) {
newaddr = ct->tuplehash[!dir].tuple.src.u3.ip;
- newport = ct->tuplehash[!dir].tuple.src.u.udp.port;
+ newport = help->help.ct_sip_info.forced_dport ? :
+ ct->tuplehash[!dir].tuple.src.u.udp.port;
} else
return 1;
@@ -121,6 +123,7 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff,
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
unsigned int coff, matchoff, matchlen;
enum sip_header_types hdr;
union nf_inet_addr addr;
@@ -229,6 +232,20 @@ next:
!map_sip_addr(skb, dataoff, dptr, datalen, SIP_HDR_TO))
return NF_DROP;
+ /* Mangle destination port for Cisco phones, then fix up checksums */
+ if (dir == IP_CT_DIR_REPLY && help->help.ct_sip_info.forced_dport) {
+ struct udphdr *uh;
+
+ if (!skb_make_writable(skb, skb->len))
+ return NF_DROP;
+
+ uh = (struct udphdr *)(skb->data + ip_hdrlen(skb));
+ uh->dest = help->help.ct_sip_info.forced_dport;
+
+ if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, 0, 0, NULL, 0))
+ return NF_DROP;
+ }
+
return NF_ACCEPT;
}
@@ -280,8 +297,10 @@ static unsigned int ip_nat_sip_expect(struct sk_buff *skb, unsigned int dataoff,
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
__be32 newip;
u_int16_t port;
+ __be16 srcport;
char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
unsigned buflen;
@@ -294,8 +313,9 @@ static unsigned int ip_nat_sip_expect(struct sk_buff *skb, unsigned int dataoff,
/* If the signalling port matches the connection's source port in the
* original direction, try to use the destination port in the opposite
* direction. */
- if (exp->tuple.dst.u.udp.port ==
- ct->tuplehash[dir].tuple.src.u.udp.port)
+ srcport = help->help.ct_sip_info.forced_dport ? :
+ ct->tuplehash[dir].tuple.src.u.udp.port;
+ if (exp->tuple.dst.u.udp.port == srcport)
port = ntohs(ct->tuplehash[!dir].tuple.dst.u.udp.port);
else
port = ntohs(exp->tuple.dst.u.udp.port);
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index bcf47eb..776130d 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -1363,8 +1363,25 @@ static int process_sip_request(struct sk_buff *skb, unsigned int dataoff,
{
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
+ enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
unsigned int matchoff, matchlen;
unsigned int cseq, i;
+ union nf_inet_addr addr;
+ __be16 port;
+
+ /* Many Cisco IP phones use a high source port for SIP requests, but
+ * listen for the response on port 5060. If we are the local
+ * router for one of these phones, save the port number from the
+ * Via: header so that nf_nat_sip can redirect the responses to
+ * the correct port.
+ */
+ if (ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen,
+ SIP_HDR_VIA_UDP, NULL, &matchoff,
+ &matchlen, &addr, &port) > 0 &&
+ port != ct->tuplehash[dir].tuple.src.u.udp.port &&
+ nf_inet_addr_cmp(&addr, &ct->tuplehash[dir].tuple.src.u3))
+ help->help.ct_sip_info.forced_dport = port;
for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
const struct sip_handler *handler;
--
1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Cernekee <cernekee@gmail.com>
To: Eric Dumazet <eric.dumazet@gmail.com>,
Patrick McHardy <kaber@trash.net>,
"David S. Miller" <davem@davemloft.net>,
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>,
"Pekka Savola (ipv6)" <pek
Cc: <netfilter-devel@vger.kernel.org>, <netfilter@vger.kernel.org>,
<coreteam@netfilter.org>, <linux-kernel@vger.kernel.org>,
<netdev@vger.kernel.org>
Subject: [PATCH v3] netfilter: nf_conntrack_sip: Handle Cisco 7941/7945 IP phones
Date: Sun, 21 Nov 2010 18:40:11 -0800 [thread overview]
Message-ID: <f0955e6c2110044fa058d0f3ecf945ca@localhost> (raw)
[v3:
Only activate the new forced_dport logic if the IP matches, but the
port does not. ]
Most SIP devices use a source port of 5060/udp on SIP requests, so the
response automatically comes back to port 5060:
phone_ip:5060 -> proxy_ip:5060 REGISTER
proxy_ip:5060 -> phone_ip:5060 100 Trying
The newer Cisco IP phones, however, use a randomly chosen high source
port for the SIP request but expect the response on port 5060:
phone_ip:49173 -> proxy_ip:5060 REGISTER
proxy_ip:5060 -> phone_ip:5060 100 Trying
Standard Linux NAT, with or without nf_nat_sip, will send the reply back
to port 49173, not 5060:
phone_ip:49173 -> proxy_ip:5060 REGISTER
proxy_ip:5060 -> phone_ip:49173 100 Trying
But the phone is not listening on 49173, so it will never see the reply.
This patch modifies nf_*_sip to work around this quirk by extracting
the SIP response port from the Via: header, iff the source IP in the
packet header matches the source IP in the SIP request.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
---
include/linux/netfilter/nf_conntrack_sip.h | 3 +++
net/ipv4/netfilter/nf_nat_sip.c | 26 +++++++++++++++++++++++---
net/netfilter/nf_conntrack_sip.c | 17 +++++++++++++++++
3 files changed, 43 insertions(+), 3 deletions(-)
diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h
index 0ce91d5..feda699 100644
--- a/include/linux/netfilter/nf_conntrack_sip.h
+++ b/include/linux/netfilter/nf_conntrack_sip.h
@@ -2,12 +2,15 @@
#define __NF_CONNTRACK_SIP_H__
#ifdef __KERNEL__
+#include <linux/types.h>
+
#define SIP_PORT 5060
#define SIP_TIMEOUT 3600
struct nf_ct_sip_master {
unsigned int register_cseq;
unsigned int invite_cseq;
+ __be16 forced_dport;
};
enum sip_expectation_classes {
diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c
index e40cf78..e5856b0 100644
--- a/net/ipv4/netfilter/nf_nat_sip.c
+++ b/net/ipv4/netfilter/nf_nat_sip.c
@@ -73,6 +73,7 @@ static int map_addr(struct sk_buff *skb, unsigned int dataoff,
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
unsigned int buflen;
__be32 newaddr;
@@ -85,7 +86,8 @@ static int map_addr(struct sk_buff *skb, unsigned int dataoff,
} else if (ct->tuplehash[dir].tuple.dst.u3.ip == addr->ip &&
ct->tuplehash[dir].tuple.dst.u.udp.port == port) {
newaddr = ct->tuplehash[!dir].tuple.src.u3.ip;
- newport = ct->tuplehash[!dir].tuple.src.u.udp.port;
+ newport = help->help.ct_sip_info.forced_dport ? :
+ ct->tuplehash[!dir].tuple.src.u.udp.port;
} else
return 1;
@@ -121,6 +123,7 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff,
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
unsigned int coff, matchoff, matchlen;
enum sip_header_types hdr;
union nf_inet_addr addr;
@@ -229,6 +232,20 @@ next:
!map_sip_addr(skb, dataoff, dptr, datalen, SIP_HDR_TO))
return NF_DROP;
+ /* Mangle destination port for Cisco phones, then fix up checksums */
+ if (dir == IP_CT_DIR_REPLY && help->help.ct_sip_info.forced_dport) {
+ struct udphdr *uh;
+
+ if (!skb_make_writable(skb, skb->len))
+ return NF_DROP;
+
+ uh = (struct udphdr *)(skb->data + ip_hdrlen(skb));
+ uh->dest = help->help.ct_sip_info.forced_dport;
+
+ if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, 0, 0, NULL, 0))
+ return NF_DROP;
+ }
+
return NF_ACCEPT;
}
@@ -280,8 +297,10 @@ static unsigned int ip_nat_sip_expect(struct sk_buff *skb, unsigned int dataoff,
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
__be32 newip;
u_int16_t port;
+ __be16 srcport;
char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
unsigned buflen;
@@ -294,8 +313,9 @@ static unsigned int ip_nat_sip_expect(struct sk_buff *skb, unsigned int dataoff,
/* If the signalling port matches the connection's source port in the
* original direction, try to use the destination port in the opposite
* direction. */
- if (exp->tuple.dst.u.udp.port ==
- ct->tuplehash[dir].tuple.src.u.udp.port)
+ srcport = help->help.ct_sip_info.forced_dport ? :
+ ct->tuplehash[dir].tuple.src.u.udp.port;
+ if (exp->tuple.dst.u.udp.port == srcport)
port = ntohs(ct->tuplehash[!dir].tuple.dst.u.udp.port);
else
port = ntohs(exp->tuple.dst.u.udp.port);
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index bcf47eb..776130d 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -1363,8 +1363,25 @@ static int process_sip_request(struct sk_buff *skb, unsigned int dataoff,
{
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
+ enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
unsigned int matchoff, matchlen;
unsigned int cseq, i;
+ union nf_inet_addr addr;
+ __be16 port;
+
+ /* Many Cisco IP phones use a high source port for SIP requests, but
+ * listen for the response on port 5060. If we are the local
+ * router for one of these phones, save the port number from the
+ * Via: header so that nf_nat_sip can redirect the responses to
+ * the correct port.
+ */
+ if (ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen,
+ SIP_HDR_VIA_UDP, NULL, &matchoff,
+ &matchlen, &addr, &port) > 0 &&
+ port != ct->tuplehash[dir].tuple.src.u.udp.port &&
+ nf_inet_addr_cmp(&addr, &ct->tuplehash[dir].tuple.src.u3))
+ help->help.ct_sip_info.forced_dport = port;
for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
const struct sip_handler *handler;
--
1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Cernekee <cernekee@gmail.com>
To: Eric Dumazet <eric.dumazet@gmail.com>,
Patrick McHardy <kaber@trash.net>,
"David S. Miller" <davem@davemloft.net>,
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>,
"Pekka Savola (ipv6)" <pekkas@netcore.fi>,
James Morris <jmorris@namei.org>,
Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: <netfilter-devel@vger.kernel.org>, <netfilter@vger.kernel.org>,
<coreteam@netfilter.org>, <linux-kernel@vger.kernel.org>,
<netdev@vger.kernel.org>
Subject: [PATCH v3] netfilter: nf_conntrack_sip: Handle Cisco 7941/7945 IP phones
Date: Sun, 21 Nov 2010 18:40:11 -0800 [thread overview]
Message-ID: <f0955e6c2110044fa058d0f3ecf945ca@localhost> (raw)
[v3:
Only activate the new forced_dport logic if the IP matches, but the
port does not. ]
Most SIP devices use a source port of 5060/udp on SIP requests, so the
response automatically comes back to port 5060:
phone_ip:5060 -> proxy_ip:5060 REGISTER
proxy_ip:5060 -> phone_ip:5060 100 Trying
The newer Cisco IP phones, however, use a randomly chosen high source
port for the SIP request but expect the response on port 5060:
phone_ip:49173 -> proxy_ip:5060 REGISTER
proxy_ip:5060 -> phone_ip:5060 100 Trying
Standard Linux NAT, with or without nf_nat_sip, will send the reply back
to port 49173, not 5060:
phone_ip:49173 -> proxy_ip:5060 REGISTER
proxy_ip:5060 -> phone_ip:49173 100 Trying
But the phone is not listening on 49173, so it will never see the reply.
This patch modifies nf_*_sip to work around this quirk by extracting
the SIP response port from the Via: header, iff the source IP in the
packet header matches the source IP in the SIP request.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
---
include/linux/netfilter/nf_conntrack_sip.h | 3 +++
net/ipv4/netfilter/nf_nat_sip.c | 26 +++++++++++++++++++++++---
net/netfilter/nf_conntrack_sip.c | 17 +++++++++++++++++
3 files changed, 43 insertions(+), 3 deletions(-)
diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h
index 0ce91d5..feda699 100644
--- a/include/linux/netfilter/nf_conntrack_sip.h
+++ b/include/linux/netfilter/nf_conntrack_sip.h
@@ -2,12 +2,15 @@
#define __NF_CONNTRACK_SIP_H__
#ifdef __KERNEL__
+#include <linux/types.h>
+
#define SIP_PORT 5060
#define SIP_TIMEOUT 3600
struct nf_ct_sip_master {
unsigned int register_cseq;
unsigned int invite_cseq;
+ __be16 forced_dport;
};
enum sip_expectation_classes {
diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c
index e40cf78..e5856b0 100644
--- a/net/ipv4/netfilter/nf_nat_sip.c
+++ b/net/ipv4/netfilter/nf_nat_sip.c
@@ -73,6 +73,7 @@ static int map_addr(struct sk_buff *skb, unsigned int dataoff,
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
unsigned int buflen;
__be32 newaddr;
@@ -85,7 +86,8 @@ static int map_addr(struct sk_buff *skb, unsigned int dataoff,
} else if (ct->tuplehash[dir].tuple.dst.u3.ip == addr->ip &&
ct->tuplehash[dir].tuple.dst.u.udp.port == port) {
newaddr = ct->tuplehash[!dir].tuple.src.u3.ip;
- newport = ct->tuplehash[!dir].tuple.src.u.udp.port;
+ newport = help->help.ct_sip_info.forced_dport ? :
+ ct->tuplehash[!dir].tuple.src.u.udp.port;
} else
return 1;
@@ -121,6 +123,7 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff,
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
unsigned int coff, matchoff, matchlen;
enum sip_header_types hdr;
union nf_inet_addr addr;
@@ -229,6 +232,20 @@ next:
!map_sip_addr(skb, dataoff, dptr, datalen, SIP_HDR_TO))
return NF_DROP;
+ /* Mangle destination port for Cisco phones, then fix up checksums */
+ if (dir == IP_CT_DIR_REPLY && help->help.ct_sip_info.forced_dport) {
+ struct udphdr *uh;
+
+ if (!skb_make_writable(skb, skb->len))
+ return NF_DROP;
+
+ uh = (struct udphdr *)(skb->data + ip_hdrlen(skb));
+ uh->dest = help->help.ct_sip_info.forced_dport;
+
+ if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, 0, 0, NULL, 0))
+ return NF_DROP;
+ }
+
return NF_ACCEPT;
}
@@ -280,8 +297,10 @@ static unsigned int ip_nat_sip_expect(struct sk_buff *skb, unsigned int dataoff,
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
__be32 newip;
u_int16_t port;
+ __be16 srcport;
char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
unsigned buflen;
@@ -294,8 +313,9 @@ static unsigned int ip_nat_sip_expect(struct sk_buff *skb, unsigned int dataoff,
/* If the signalling port matches the connection's source port in the
* original direction, try to use the destination port in the opposite
* direction. */
- if (exp->tuple.dst.u.udp.port ==
- ct->tuplehash[dir].tuple.src.u.udp.port)
+ srcport = help->help.ct_sip_info.forced_dport ? :
+ ct->tuplehash[dir].tuple.src.u.udp.port;
+ if (exp->tuple.dst.u.udp.port == srcport)
port = ntohs(ct->tuplehash[!dir].tuple.dst.u.udp.port);
else
port = ntohs(exp->tuple.dst.u.udp.port);
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index bcf47eb..776130d 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -1363,8 +1363,25 @@ static int process_sip_request(struct sk_buff *skb, unsigned int dataoff,
{
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
+ enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
unsigned int matchoff, matchlen;
unsigned int cseq, i;
+ union nf_inet_addr addr;
+ __be16 port;
+
+ /* Many Cisco IP phones use a high source port for SIP requests, but
+ * listen for the response on port 5060. If we are the local
+ * router for one of these phones, save the port number from the
+ * Via: header so that nf_nat_sip can redirect the responses to
+ * the correct port.
+ */
+ if (ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen,
+ SIP_HDR_VIA_UDP, NULL, &matchoff,
+ &matchlen, &addr, &port) > 0 &&
+ port != ct->tuplehash[dir].tuple.src.u.udp.port &&
+ nf_inet_addr_cmp(&addr, &ct->tuplehash[dir].tuple.src.u3))
+ help->help.ct_sip_info.forced_dport = port;
for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
const struct sip_handler *handler;
--
1.7.0.4
next reply other threads:[~2010-11-22 2:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-22 2:40 Kevin Cernekee [this message]
2010-11-22 2:40 ` [PATCH v3] netfilter: nf_conntrack_sip: Handle Cisco 7941/7945 IP phones Kevin Cernekee
2010-11-22 2:40 ` Kevin Cernekee
2010-11-22 7:52 ` Eric Dumazet
2012-12-17 0:17 ` David Woodhouse
2012-12-17 0:44 ` Pablo Neira Ayuso
2012-12-17 0:44 ` Pablo Neira Ayuso
2012-12-17 7:26 ` Kevin Cernekee
2012-12-17 9:55 ` Pablo Neira Ayuso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f0955e6c2110044fa058d0f3ecf945ca@localhost \
--to=cernekee@gmail.com \
--cc=coreteam@netfilter.org \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=kaber@trash.net \
--cc=kuznet@ms2.inr.ac.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@vger.kernel.org \
--cc=netfilter@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.