All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Johnson <jjohnson@codeaurora.org>
To: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
	ath11k <ath11k-bounces@lists.infradead.org>
Subject: Re: [PATCH v4 0/3] Add support to configure beacon tx mode
Date: Tue, 08 Jun 2021 14:41:05 -0700	[thread overview]
Message-ID: <fb7af985fdc740c78e9615c518aa1616@codeaurora.org> (raw)
In-Reply-To: <1623164855-15910-1-git-send-email-mkenna@codeaurora.org>

On 2021-06-08 08:07, Maharaja Kennadyrajan wrote:
> Add support to configure the beacon tx mode as STAGGERED
> or BURST mode via hostapd configuration during the AP
> bring-up or via wpa_suppplicant configuration during MESH
> bring-up.
> 
> Beacons can be sent out in burst(continuously in a single shot
> one after another) or staggered (equally spread out over beacon
> interval) mode.
> 
> V4: Rebased on latest ath.git TOT.
> 
> V3: Addressed Johnson's comment on v2 patch.
> 
> V2: Addressed Johannes's comment on v1 patch.
> 
> Maharaja Kennadyrajan (3):
>   nl80211: Add support for beacon tx mode
>   mac80211: Add support for beacon tx mode
>   ath11k: Add support for beacon tx mode
> 
>  drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
>  include/net/cfg80211.h                |  4 ++++
>  include/net/mac80211.h                |  2 ++
>  include/uapi/linux/nl80211.h          | 16 ++++++++++++++++
>  net/mac80211/cfg.c                    |  2 ++
>  net/wireless/nl80211.c                |  9 +++++++++
>  6 files changed, 40 insertions(+), 3 deletions(-)

For entire set:
Reviewed-by: Jeff Johnson <jjohnson@codeaurora.org>

-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

WARNING: multiple messages have this Message-ID (diff)
From: Jeff Johnson <jjohnson@codeaurora.org>
To: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
	ath11k <ath11k-bounces@lists.infradead.org>
Subject: Re: [PATCH v4 0/3] Add support to configure beacon tx mode
Date: Tue, 08 Jun 2021 14:41:05 -0700	[thread overview]
Message-ID: <fb7af985fdc740c78e9615c518aa1616@codeaurora.org> (raw)
In-Reply-To: <1623164855-15910-1-git-send-email-mkenna@codeaurora.org>

On 2021-06-08 08:07, Maharaja Kennadyrajan wrote:
> Add support to configure the beacon tx mode as STAGGERED
> or BURST mode via hostapd configuration during the AP
> bring-up or via wpa_suppplicant configuration during MESH
> bring-up.
> 
> Beacons can be sent out in burst(continuously in a single shot
> one after another) or staggered (equally spread out over beacon
> interval) mode.
> 
> V4: Rebased on latest ath.git TOT.
> 
> V3: Addressed Johnson's comment on v2 patch.
> 
> V2: Addressed Johannes's comment on v1 patch.
> 
> Maharaja Kennadyrajan (3):
>   nl80211: Add support for beacon tx mode
>   mac80211: Add support for beacon tx mode
>   ath11k: Add support for beacon tx mode
> 
>  drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
>  include/net/cfg80211.h                |  4 ++++
>  include/net/mac80211.h                |  2 ++
>  include/uapi/linux/nl80211.h          | 16 ++++++++++++++++
>  net/mac80211/cfg.c                    |  2 ++
>  net/wireless/nl80211.c                |  9 +++++++++
>  6 files changed, 40 insertions(+), 3 deletions(-)

For entire set:
Reviewed-by: Jeff Johnson <jjohnson@codeaurora.org>

  parent reply	other threads:[~2021-06-08 21:41 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-08 15:07 [PATCH v4 0/3] Add support to configure beacon tx mode Maharaja Kennadyrajan
2021-06-08 15:07 ` Maharaja Kennadyrajan
2021-06-08 15:07 ` [PATCH v4 1/3] nl80211: Add support for " Maharaja Kennadyrajan
2021-06-08 15:07   ` Maharaja Kennadyrajan
2021-06-23 11:16   ` Johannes Berg
2021-06-23 11:16     ` Johannes Berg
2021-06-29 17:44     ` Felix Fietkau
2021-06-29 17:44       ` Felix Fietkau
2021-08-10  8:32       ` Maharaja Kennadyrajan
2021-08-10  8:32         ` Maharaja Kennadyrajan
2021-08-10  8:31     ` Maharaja Kennadyrajan
2021-08-10  8:31       ` Maharaja Kennadyrajan
2021-06-08 15:07 ` [PATCH v4 2/3] mac80211: " Maharaja Kennadyrajan
2021-06-08 15:07   ` Maharaja Kennadyrajan
2021-06-08 15:07 ` [PATCH v4 3/3] ath11k: " Maharaja Kennadyrajan
2021-06-08 15:07   ` Maharaja Kennadyrajan
2021-06-08 21:41 ` Jeff Johnson [this message]
2021-06-08 21:41   ` [PATCH v4 0/3] Add support to configure " Jeff Johnson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fb7af985fdc740c78e9615c518aa1616@codeaurora.org \
    --to=jjohnson@codeaurora.org \
    --cc=ath11k-bounces@lists.infradead.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=mkenna@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.