All of lore.kernel.org
 help / color / mirror / Atom feed
* [meta-oe 1/6] mpd: initial add 0.16.7
@ 2012-03-18 20:40 Andreas Müller
  2012-03-18 20:40 ` [meta-oe 2/6] libmpd: initial add 11.8.17 Andreas Müller
                   ` (5 more replies)
  0 siblings, 6 replies; 11+ messages in thread
From: Andreas Müller @ 2012-03-18 20:40 UTC (permalink / raw)
  To: openembedded-devel

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
---
 meta-oe/recipes-multimedia/musicpd/mpd/mpd       |   43 +++
 meta-oe/recipes-multimedia/musicpd/mpd/mpd.conf  |  420 ++++++++++++++++++++++
 meta-oe/recipes-multimedia/musicpd/mpd_0.16.7.bb |   42 +++
 3 files changed, 505 insertions(+), 0 deletions(-)
 create mode 100644 meta-oe/recipes-multimedia/musicpd/mpd/mpd
 create mode 100644 meta-oe/recipes-multimedia/musicpd/mpd/mpd.conf
 create mode 100644 meta-oe/recipes-multimedia/musicpd/mpd_0.16.7.bb

diff --git a/meta-oe/recipes-multimedia/musicpd/mpd/mpd b/meta-oe/recipes-multimedia/musicpd/mpd/mpd
new file mode 100644
index 0000000..f71142a
--- /dev/null
+++ b/meta-oe/recipes-multimedia/musicpd/mpd/mpd
@@ -0,0 +1,43 @@
+#!/bin/sh
+DESC="The Music Player Daemon"
+DAEMON=/usr/bin/mpd
+MPDCONF=/etc/mpd.conf
+PIDFILE=$(sed -n 's/^[[:space:]]*pid_file[[:space:]]*"\?\([^"]*\)\"\?/\1/p' $MPDCONF)
+DBFILE=$(sed -n 's/^[[:space:]]*db_file[[:space:]]*"\?\([^"]*\)\"\?/\1/p' $MPDCONF)
+
+case "$1" in
+  start)
+    if [ -z "$PIDFILE" -o -z "$DBFILE" ]; then
+        echo "$MPDCONF must have db_file and pid_file set; cannot start daemon."
+        exit 1
+    fi
+
+    PIDDIR=$(dirname "$PIDFILE")
+    if [ ! -d "$PIDDIR" ]; then
+        mkdir -m 0755 $PIDDIR
+        chown mpd:audio $PIDDIR
+    fi
+
+    echo "Starting $DESC"
+    start-stop-daemon --start --quiet --oknodo --pidfile "$PIDFILE" --exec "$DAEMON" "$MPDCONF"
+    ;;
+
+  stop)
+    if [ -z "$PIDFILE" ]; then
+        echo "$MPDCONF must have pid_file set; cannot stop daemon."
+        exit 1
+    fi
+    echo "Stopping $DESC"
+    $DAEMON --kill "$MPDCONF"
+    ;;
+
+  restart)
+    $0 stop >/dev/null 2>&1
+    $0 start
+    ;;
+
+  *)
+    echo "Usage: $0 {start|stop|restart}"
+    exit 0
+    ;;
+esac
diff --git a/meta-oe/recipes-multimedia/musicpd/mpd/mpd.conf b/meta-oe/recipes-multimedia/musicpd/mpd/mpd.conf
new file mode 100644
index 0000000..3a99d8a
--- /dev/null
+++ b/meta-oe/recipes-multimedia/musicpd/mpd/mpd.conf
@@ -0,0 +1,420 @@
+# An example configuration file for MPD
+# See the mpd.conf man page for a more detailed description of each parameter.
+
+
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database. This
+# setting defaults to the XDG directory, otherwise the music directory will be
+# be disabled and audio files will only be accepted over ipc socket (using
+# file:// protocol) or streaming files over an accepted protocol.
+#
+music_directory		"/var/lib/mpd/music"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format. This setting defaults to playlist saving being disabled.
+#
+playlist_directory		"/var/lib/mpd/playlists"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up. This setting defaults to disabled which will allow
+# MPD to accept files over ipc socket (using file:// protocol) or streaming
+# files over an accepted protocol.
+#
+db_file			"/var/lib/mpd/mpd.db"
+#
+# These settings are the locations for the daemon log files for the daemon.
+# These logs are great for troubleshooting, depending on your log_level
+# settings.
+#
+# The special value "syslog" makes MPD use the local syslog daemon. This
+# setting defaults to logging to syslog, otherwise logging is disabled.
+#
+log_file			"/var/log/mpd.log"
+#
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default and the pid file will not be stored.
+#
+pid_file			"/var/run/mpd/mpd.pid"
+#
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default and the server
+# state will be reset on server start up.
+#
+state_file		"/var/lib/mpd/state"
+#
+# The location of the sticker database.  This is a database which
+# manages dynamic information attached to songs.
+#
+#sticker_file			"~/.mpd/sticker.sql"
+#
+###############################################################################
+
+
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as. MPD should never run as
+# root and you may use this setting to make MPD change its user ID after
+# initialization. This setting is disabled by default and MPD is run as the
+# current user.
+#
+user "mpd"
+#
+# This setting specifies the group that MPD will run as. If not specified
+# primary group of user specified with "user" setting will be used (if set).
+# This is useful if MPD needs to be a member of group such as "audio" to
+# have permission to use sound card.
+#
+group				"audio"
+#
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other then the default, any.
+# This setting can deny access to control of the daemon.
+#
+# For network
+bind_to_address		"any"
+#
+# And for Unix Socket
+#bind_to_address		"~/.mpd/socket"
+#
+# This setting is the TCP port that is desired for the daemon to get assigned
+# to.
+#
+#port				"6600"
+#
+# This setting controls the type of information which is logged. Available
+# setting arguments are "default", "secure" or "verbose". The "verbose" setting
+# argument is recommended for troubleshooting, though can quickly stretch
+# available resources on limited hardware storage.
+#
+#log_level			"default"
+#
+# If you have a problem with your MP3s ending abruptly it is recommended that
+# you set this argument to "no" to attempt to fix the problem. If this solves
+# the problem, it is highly recommended to fix the MP3 files with vbrfix
+# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
+# point gapless MP3 playback can be enabled.
+#
+#gapless_mp3_playback			"yes"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists	"no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. Optionally, 'comment' can be added to this
+# list.
+#
+#metadata_to_use	"artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+# This setting enables automatic update of MPD's database when files in
+# music_directory are changed.
+#
+#auto_update	"yes"
+#
+# Limit the depth of the directories being watched, 0 means only watch
+# the music directory itself.  There is no limit by default.
+#
+#auto_update_depth "3"
+#
+###############################################################################
+
+
+# Symbolic link behavior ######################################################
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
+#
+#follow_outside_symlinks	"yes"
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
+#
+#follow_inside_symlinks		"yes"
+#
+###############################################################################
+
+
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+#zeroconf_enabled		"yes"
+#
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network.
+#
+#zeroconf_name			"Music Player"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# can setting can be specified multiple times for different password profiles.
+#
+#password                        "password@read,add,control,admin"
+#
+# This setting specifies the permissions a user has who has not yet logged in.
+#
+#default_permissions             "read,add,control,admin"
+#
+###############################################################################
+
+
+# Input #######################################################################
+#
+
+input {
+        plugin "curl"
+#       proxy "proxy.isp.com:8080"
+#       proxy_user "user"
+#       proxy_password "password"
+}
+
+#
+###############################################################################
+
+# Audio Output ################################################################
+#
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
+# other audio outputs.
+#
+# board specific examples #####################################################
+# (feel free to add futher)
+#
+# overo (tested with TOBI expansion board)
+#audio_output {
+#	type		"alsa"
+#	name		"overo"
+#	mixer_control	"Headset"
+#	mixer_index	"0"
+#}
+#
+# general examples ############################################################
+#
+# An example of an ALSA output:
+#
+#audio_output {
+#	type		"alsa"
+#	name		"My ALSA Device"
+##	device		"hw:0,0"	# optional
+##	format		"44100:16:2"	# optional
+##	mixer_type      "hardware"	# optional
+##	mixer_device	"default"	# optional
+##	mixer_control	"PCM"		# optional
+##	mixer_index	"0"		# optional
+#}
+#
+# An example of an OSS output:
+#
+#audio_output {
+#	type		"oss"
+#	name		"My OSS Device"
+##	device		"/dev/dsp"	# optional
+##	format		"44100:16:2"	# optional
+##	mixer_type      "hardware"	# optional
+##	mixer_device	"/dev/mixer"	# optional
+##	mixer_control	"PCM"		# optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+#	type		"shout"
+#	encoding	"ogg"			# optional
+#	name		"My Shout Stream"
+#	host		"localhost"
+#	port		"8000"
+#	mount		"/mpd.ogg"
+#	password	"hackme"
+#	quality		"5.0"
+#	bitrate		"128"
+#	format		"44100:16:1"
+##	protocol	"icecast2"		# optional
+##	user		"source"		# optional
+##	description	"My Stream Description"	# optional
+##	genre		"jazz"			# optional
+##	public		"no"			# optional
+##	timeout		"2"			# optional
+##	mixer_type      "software"		# optional
+#}
+#
+# An example of a recorder output:
+#
+#audio_output {
+#	type		"recorder"
+#	name		"My recorder"
+#	encoder		"vorbis"		# optional, vorbis or lame
+#	path		"/var/lib/mpd/recorder/mpd.ogg"
+##	quality		"5.0"			# do not define if bitrate is defined
+#	bitrate		"128"			# do not define if quality is defined
+#	format		"44100:16:1"
+#}
+#
+# An example of a httpd output (built-in HTTP streaming server):
+#
+#audio_output {
+#	type		"httpd"
+#	name		"My HTTP Stream"
+#	encoder		"vorbis"		# optional, vorbis or lame
+#	port		"8000"
+#	bind_to_address	"0.0.0.0"		# optional, IPv4 or IPv6
+##	quality		"5.0"			# do not define if bitrate is defined
+#	bitrate		"128"			# do not define if quality is defined
+#	format		"44100:16:1"
+#	max_clients	"0"			# optional 0=no limit
+#}
+#
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
+#
+#audio_output {
+#	type		"pulse"
+#	name		"My Pulse Output"
+##	server		"remote_server"		# optional
+##	sink		"remote_server_sink"	# optional
+#}
+#
+## Example "pipe" output:
+#
+#audio_output {
+#	type		"pipe"
+#	name		"my pipe"
+#	command		"aplay -f cd 2>/dev/null"
+## Or if you're want to use AudioCompress
+#	command		"AudioCompress -m | aplay -f cd 2>/dev/null"
+## Or to send raw PCM stream through PCM:
+#	command		"nc example.org 8765"
+#	format		"44100:16:2"
+#}
+#
+## An example of a null output (for no audio output):
+#
+#audio_output {
+#	type		"null"
+#	name		"My Null Output"
+#	mixer_type      "none"			# optional
+#}
+#
+# This setting will change all decoded audio to be converted to the specified
+# format before being passed to the audio outputs. By default, this setting is
+# disabled.
+#
+#audio_output_format		"44100:16:2"
+#
+# If MPD has been compiled with libsamplerate support, this setting specifies
+# the sample rate converter to use.  Possible values can be found in the
+# mpd.conf man page or the libsamplerate documentation. By default, this is
+# setting is disabled.
+#
+#samplerate_converter		"Fastest Sinc Interpolator"
+#
+###############################################################################
+
+
+# Normalization automatic volume adjustments ##################################
+#
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "off", "album" or "track". See <http://www.replaygain.org>
+# for more details. This setting is off by default.
+#
+#replaygain			"album"
+#
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
+#
+#replaygain_preamp		"0"
+#
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness". This setting is disabled by default.
+#
+#volume_normalization		"no"
+#
+###############################################################################
+
+
+# MPD Internal Buffering ######################################################
+#
+# This setting adjusts the size of internal decoded audio buffering. Changing
+# this may have undesired effects. Don't change this if you don't know what you
+# are doing.
+#
+#audio_buffer_size		"2048"
+#
+# This setting controls the percentage of the buffer which is filled before
+# beginning to play. Increasing this reduces the chance of audio file skipping,
+# at the cost of increased time prior to audio playback.
+#
+#buffer_before_play		"10%"
+#
+###############################################################################
+
+
+# Resource Limitations ########################################################
+#
+# These settings are various limitations to prevent MPD from using too many
+# resources. Generally, these settings should be minimized to prevent security
+# risks, depending on the operating resources.
+#
+#connection_timeout		"60"
+#max_connections		"10"
+#max_playlist_length		"16384"
+#max_command_list_size		"2048"
+#max_output_buffer_size		"8192"
+#
+###############################################################################
+
+
+# Character Encoding ##########################################################
+#
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting.
+#
+#filesystem_charset		"UTF-8"
+#
+# This setting controls the encoding that ID3v1 tags should be converted from.
+#
+#id3v1_encoding			"ISO-8859-1"
+#
+###############################################################################
+
+
+# SIDPlay decoder #############################################################
+#
+# songlength_database:
+#  Location of your songlengths file, as distributed with the HVSC.
+#  The sidplay plugin checks this for matching MD5 fingerprints.
+#  See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
+#
+# default_songlength:
+#  This is the default playing time in seconds for songs not in the
+#  songlength database, or in case you're not using a database.
+#  A value of 0 means play indefinitely.
+#
+# filter:
+#  Turns the SID filter emulation on or off.
+#
+#decoder {
+#	plugin			"sidplay"
+#	songlength_database	"/media/C64Music/DOCUMENTS/Songlengths.txt"
+#	default_songlength	"120"
+#	filter "true"
+#}
+#
+###############################################################################
+
diff --git a/meta-oe/recipes-multimedia/musicpd/mpd_0.16.7.bb b/meta-oe/recipes-multimedia/musicpd/mpd_0.16.7.bb
new file mode 100644
index 0000000..bc07415
--- /dev/null
+++ b/meta-oe/recipes-multimedia/musicpd/mpd_0.16.7.bb
@@ -0,0 +1,42 @@
+DESCRIPTION = "Music Player Daemon"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe"
+HOMEPAGE ="http://sourceforge.net/projects/musicpd"
+
+DEPENDS = "alsa-lib libsamplerate0 libsndfile1 libvorbis libogg faad2 ffmpeg curl sqlite bzip2 \
+           ${@base_conditional('ENTERPRISE_DISTRO', '1', '', 'libmad lame libid3tag', d)}"
+
+SRC_URI = " \
+    ${SOURCEFORGE_MIRROR}/musicpd/${PN}/${PV}/${PN}-${PV}.tar.bz2 \
+    file://mpd \
+    file://mpd.conf \
+"
+
+SRC_URI[md5sum] = "3d0e7c36646e80386b32966bd4268e8d"
+SRC_URI[sha256sum] = "47c10553389752c7fa072cf87c2bd30c552de75819fcf8286f3e7cc14ff0e32e"
+
+inherit autotools update-rc.d useradd
+
+USERADD_PACKAGES = "${PN}"
+USERADD_PARAM_${PN} = " \
+    --system --no-create-home \
+    --home ${localstatedir}/lib/mpd \
+    --groups audio \
+    --user-group mpd"
+
+INITSCRIPT_NAME = "mpd"
+INITSCRIPT_PARAMS = "defaults 95"
+
+do_install_append() {
+    install -d ${D}/${sysconfdir}/init.d
+    install -m 755 ${WORKDIR}/mpd ${D}/${sysconfdir}/init.d
+    install -m 644 ${WORKDIR}/mpd.conf ${D}/${sysconfdir}/mpd.conf
+
+    install -d ${D}/${localstatedir}/lib/mpd/music
+    chown -R mpd ${D}/${localstatedir}/lib/mpd
+    chmod 775 ${D}/${localstatedir}/lib/mpd/music
+
+    install -d ${D}/${localstatedir}/lib/mpd/playlists
+}
+
+EXTRA_OECONF = "enable_bzip2=yes"
-- 
1.7.4.4




^ permalink raw reply related	[flat|nested] 11+ messages in thread
end of thread, other threads:[~2012-03-20 17:29 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-18 20:40 [meta-oe 1/6] mpd: initial add 0.16.7 Andreas Müller
2012-03-18 20:40 ` [meta-oe 2/6] libmpd: initial add 11.8.17 Andreas Müller
2012-03-18 20:40 ` [meta-oe 3/6] xfmpc: initial add 0.2.2 Andreas Müller
2012-03-18 20:40 ` [meta-oe 4/6] xfce4-mpc-plugin: initial add 0.4.2 Andreas Müller
2012-03-18 20:40 ` [meta-oe 5/6] xfce4-mixer: initial add 4.8.0 Andreas Müller
2012-03-18 20:40 ` [meta-oe 6/6] task-xfce-extended: add xfmpc, xfce4-mpc-plugin and xfce4-mixer Andreas Müller
2012-03-19 12:54 ` [meta-oe 1/6] mpd: initial add 0.16.7 Koen Kooi
2012-03-19 15:24   ` Andreas Müller
2012-03-19 19:01     ` Koen Kooi
2012-03-20  8:37       ` Andreas Müller
2012-03-20 17:20         ` Koen Kooi

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.