From: Avl Jawrowski <avljawrowski@gmail.com>
To: linux-media@vger.kernel.org
Subject: Problems with Pinnacle 310i (saa7134) and recent kernels
Date: Sat, 18 Jul 2009 14:05:22 +0000 (UTC) [thread overview]
Message-ID: <loom.20090718T135733-267@post.gmane.org> (raw)
Hello,
I have a problem with my Pinnacle PCTV Hybrid Pro PCI using recent kernels. With
2.6.29 both dvbscan and MPlayer stopped to work giving:
dvbscan:
Unable to query frontend status
mplayer:
MPlayer SVN-r29351-4.2.4 (C) 2000-2009 MPlayer Team
Not able to lock to the signal on the given frequency, timeout: 30
dvb_tune, TUNING FAILED
Now with 2.6.30.1 Kaffeine sometimes works and sometimes not, going in timeout.
This is the hardware:
01:02.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Vi
deo Broadcast Decoder (rev d1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step
ping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort
- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (63750ns min, 63750ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at cfddf800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot
-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=3 PME-
Kernel driver in use: saa7134
Kernel modules: saa7134
dmesg output:
saa7130/34: v4l2 driver version 0.2.15 loaded
saa7134 0000:01:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
saa7133[0]: found at 0000:01:02.0, rev: 209, irq: 22, latency: 32, mmio: 0xcfddf
800
saa7133[0]: subsystem: ffff:ffff, board: Pinnacle PCTV 310i [card=101,insmod opt
ion]
saa7133[0]: board init: gpio is 600c000
IRQ 22/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7133[0]: i2c eeprom read error (err=-5)
tuner 1-004b: chip found @ 0x96 (saa7133[0])
tda829x 1-004b: setting tuner address to 61
tda829x 1-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
dvb_init() allocating 1 frontend
DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
saa7134 ALSA driver for DMA sound loaded
IRQ 22/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7133[0]/alsa: saa7133[0] at 0xcfddf800 irq 22 registered as card -1
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
Can anyone help me getting my tyner working again?
Thanks, avljawrowski
next reply other threads:[~2009-07-18 14:10 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-18 14:05 Avl Jawrowski [this message]
2009-07-19 19:59 ` Problems with Pinnacle 310i (saa7134) and recent kernels hermann pitton
2009-07-20 23:30 ` Avl Jawrowski
2009-07-21 3:20 ` hermann pitton
2009-07-22 12:41 ` Avl Jawrowski
2009-07-23 8:40 ` hermann pitton
2009-09-10 21:51 ` Avl Jawrowski
2009-09-11 1:00 ` hermann pitton
2009-09-12 21:39 ` Avl Jawrowski
2009-09-13 4:12 ` hermann pitton
2009-09-13 12:02 ` Avl Jawrowski
2009-09-13 22:42 ` hermann pitton
2009-09-14 6:24 ` Hans Verkuil
2009-09-14 23:50 ` saa7134 - radio broken for v4l1 apps - was - " hermann pitton
2009-09-15 16:39 ` Hans Verkuil
2009-09-15 22:29 ` hermann pitton
2009-09-14 13:32 ` Avl Jawrowski
2009-09-14 22:53 ` hermann pitton
2009-09-15 20:27 ` Avl Jawrowski
2009-09-16 22:07 ` hermann pitton
2010-02-20 11:49 ` Avl Jawrowski
2010-03-01 5:21 ` hermann pitton
2010-06-26 12:08 ` Avl Jawrowski
2010-06-26 21:48 ` hermann pitton
2010-06-29 11:22 ` Avl Jawrowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20090718T135733-267@post.gmane.org \
--to=avljawrowski@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.