From: Avl Jawrowski <avljawrowski@gmail.com>
To: linux-media@vger.kernel.org
Subject: Re: Problems with Pinnacle 310i (saa7134) and recent kernels
Date: Thu, 10 Sep 2009 21:51:43 +0000 (UTC) [thread overview]
Message-ID: <loom.20090910T234610-403@post.gmane.org> (raw)
In-Reply-To: 1248338430.3206.34.camel@pc07.localdom.local
hermann pitton <hermann-pitton <at> arcor.de> writes:
> If it seems to deliver stable results now, you can even try to re-flash
> it with rewrite_eeprom.pl in v4l2-apps/util. Read the instructions on
> top of it.
With 2.6.30 it's stable. I've reflashed the eeprom and now the card is
autodetected:
saa7130/34: v4l2 driver version 0.2.15 loaded
saa7133[0]: found at 0000:01:02.0, rev: 209, irq: 22, latency: 32, mmio:
0xcfddf800
saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i
[card=101,autodetected]
saa7133[0]: board init: gpio is 600e000
IRQ 22/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2e 15 13 ff ff
saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 03 c5 e8 9d
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c-adapter i2c-0: Invalid 7-bit address 0x7a
tuner 0-004b: chip found @ 0x96 (saa7133[0])
tda829x 0-004b: setting tuner address to 61
tda829x 0-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
dvb_init() allocating 1 frontend
DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
However it works still only with Kaffeine and w_scan.
dvbscan (last mercurial) give:
Unable to query frontend status
And with 2.6.31 (same configuration) appears this new error:
i2c-adapter i2c-0: Invalid 7-bit address 0x7a
It can be a problem?
> Cheers,
> Hermann
Thank you!
next prev parent reply other threads:[~2009-09-10 21:52 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-18 14:05 Problems with Pinnacle 310i (saa7134) and recent kernels Avl Jawrowski
2009-07-19 19:59 ` hermann pitton
2009-07-20 23:30 ` Avl Jawrowski
2009-07-21 3:20 ` hermann pitton
2009-07-22 12:41 ` Avl Jawrowski
2009-07-23 8:40 ` hermann pitton
2009-09-10 21:51 ` Avl Jawrowski [this message]
2009-09-11 1:00 ` hermann pitton
2009-09-12 21:39 ` Avl Jawrowski
2009-09-13 4:12 ` hermann pitton
2009-09-13 12:02 ` Avl Jawrowski
2009-09-13 22:42 ` hermann pitton
2009-09-14 6:24 ` Hans Verkuil
2009-09-14 23:50 ` saa7134 - radio broken for v4l1 apps - was - " hermann pitton
2009-09-15 16:39 ` Hans Verkuil
2009-09-15 22:29 ` hermann pitton
2009-09-14 13:32 ` Avl Jawrowski
2009-09-14 22:53 ` hermann pitton
2009-09-15 20:27 ` Avl Jawrowski
2009-09-16 22:07 ` hermann pitton
2010-02-20 11:49 ` Avl Jawrowski
2010-03-01 5:21 ` hermann pitton
2010-06-26 12:08 ` Avl Jawrowski
2010-06-26 21:48 ` hermann pitton
2010-06-29 11:22 ` Avl Jawrowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20090910T234610-403@post.gmane.org \
--to=avljawrowski@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.